One of the main features of the Kia company is that cars are assembled at the branches of those countries in the market of which they will subsequently be sold.
Photo: Kia plant in the USA
Worth noting that appearance And specifications of one model may directly depend on the branch at which the car is produced.
The most powerful enterprise in Russia, where Kia products are made, is the Avtotor plant in Kaliningrad.
The Kia Rio car is considered one of the best-selling in the world market, in particular in Russia. Motorists first of all note the high build quality, nice design and low cost.
As mentioned above, for Russia, Rio is assembled on Kaliningrad plant.
Among the producing countries of Rio was Ukraine, where the Kia Rio was assembled at the LUAZ plant. Do not forget about branches in Thailand, India, China, Ecuador and South Korea.
Kia Sid
A golf-class car that has been among the leaders in sales over the past few years.
For the Russian market, LED is assembled at Avtotor in Kaliningrad, and for the CIS markets at an enterprise in Kazakhstan.
The most powerful plant is a South Korean enterprise whose products can be found all over the world.
Assembly of Kia cars in Mexico kia carnival
Kia Carnival is one of the most "ancient" cars of the Korean concern, which has been assembled since 1998. Since that time, the car has gone through three modifications, each of which was made at a factory in South Korea.
Also, until 2014, the car was produced in the UK and the USA, but there it was called Kia Sedona.
Kia cerate
On this moment, Cerate is on the list of leaders in sales in Russia. Until 2013, the car was made in South Korea and Kazakhstan.
It is worth noting that new modification models are also assembled at a Russian enterprise.
In 2006, when the second generation of Cerato was introduced, the “Korean” began to be assembled in the USA.
Kia Clarus
Clarus is one of the few Korean cars, which was assembled exclusively at native enterprises. In fairness, it should be noted that for a short period of time the assembly took place at the Kaliningrad Avtotor.
Kia Mojave
Even at the initial stage of development, company representatives claimed that the SUV Kia Mojave will only ship to the US. But later, it was decided to export the model to Russian market.
To date, Mojave is assembled at Avtotor Kaliningrad, as well as in Kazakhstan and South Korea.
It is worth noting that in the US the SUV is referred to as the Kia Borrego.
Photo: Kia assembly in Korea Kia Opirus and Kia Quoris
It's no secret to anyone that Kia Quoris the company's most expensive car. Its predecessor was a sedan kia opirus, whose production ended in 2010, and took place exclusively in South Korean enterprises.
Kia Quoris is assembled in Kaliningrad to this day.
Kia Optima
Another Kia Optima model, popular among domestic motorists, appeared on the Russian market in 2012, and it was then that it began mass production to Avtotor.
Kia Sorento
New Generation midsize SUV Sorento cannot boast of the same popularity as the previous ones, but there are fans.
To date, Sorento is produced at the Kaliningrad enterprise. For some time, the assembly was carried out at Izh-Avto.
It is worth noting that Sorento SUVs for the European market are made at the facilities of Turkey and Slovakia.
kia soul
Russian Kia variant Soul boasts a unique design. Due to this, the car of domestic assembly is significantly different from foreign counterparts.
No one will be surprised that the car is produced at Avtotor.
In addition, to a greater extent local markets, the model is assembled in Kazakhstan, China and South Korea.
Video: Kia car assembly process
kia sportage
crossover kia sportage gained high popularity due to its design, and fantastic driving performance. The first generation of the car was assembled at German enterprises. Subsequent modifications are made in Russia and Slovakia.
kia venga
Until recently, Kia Venga was the only Kia model that was not assembled in Russia. But, in 2015, the situation improved, because the Avtotor enterprise undertook obligations to annually fill domestic market quality cars.
Conclusion
Kia cars are among the most popular, both in the global and domestic markets.
The range of models is really impressive, and it seems that the Korean concern has set itself the task of inserting at least one representative in each car class.
For the domestic market, Kia models are assembled mainly at the Avtotor Kaliningrad plant. However, for some time, the assembly was carried out at the Izh-Avto enterprise.
In fact, for each market, Kia cars are assembled in exactly those markets where they will subsequently be closest to the final buyer. It is interesting that Kia has a number of models, the design and internal filling (up to engines and transmission) of which differs in different countries, and therefore they are assembled in so many markets. In Russia, most of the concern's models are assembled at the Avtotor plant in the city of Kaliningrad, where Hyundai, BMW and General Motors cars are also assembled.
Automobile plant "Avtotor", where it is assembled whole line Kia models
Where is the Kia Rio assembled?
The best-selling Kia model and one of the best-selling cars in all of Russia, the Kia Rio has won a huge number of audience sympathies due to the combination of high build quality, incredibly beautiful design and, of course, the cost and budget of the car class. Kia Rio cars sold in Russia are assembled at the Avtotor automobile plant, which is located in Kaliningrad.
In addition, Kia Rio was assembled for some time in Ukraine at the LuAZ plant, and European and American versions (Kia K2, differing both in design and internal equipment) are assembled in Thailand, Indonesia, India, China, Vietnam, Iran and even in Ecuador and , of course, at the main Kia plant - in South Korea.
Where is Kia Cee "d assembled?
The Golf-class model, which deservedly gained great popularity in Russia, is assembled, like Rio, at the Avtotor plant in Kaliningrad, and cars for the CIS countries are assembled in Ust-Kamenogorsk of Kazakhstan, as well as directly in South Korea itself at the main automobile plant concern Kia.
Where is the Kia Carnival assembled?
This model had three modifications that were produced from 1998 to 2011, and all of them Kia Carnival cars were assembled at the main Kip plant in South Korea.
Other regions where it is collected this model is the UK and North America, where she already has a different name - Kia Sedona. In these regions, the model is assembled until 2014.
Where is the Kia Cerato assembled?
One of the best-selling Kia models in Russia, Cerato was assembled in South Korea until 2013 (at home, the model wears name Kia K3) and Ust-Kamenogorsk, Kazakhstan. Nevertheless, the new generation of Kia cerate began to be assembled in Russia. And, starting in 2006, the second generation of Cerato was assembled in the USA (Kia Forte).
Where is Kia Clarus (Credos) assembled?
Kia Clarus is one of the few Kia models that has always been assembled in the main conveyor - at a plant in South Korea, where the Kia brand is located. Also, for some time, the model was assembled at the Avtotor automobile plant in Kaliningrad.
Where is the Kia Mohave assembled?
The Kia Mohave SUV has been sold in Russia since 2008, and its production as a whole was originally directed to the North American market. To date, cars Kia Mohave, which are sold in Russia, are assembled here at the plant in Kaliningrad at the Avtotor plant, as well as directly in South Korea and in Ust-Kamenogorsk in Kazakhstan. The model for the North American market (there it is called the Kia Borrego is assembled in the USA.
Where are Kia Quoris and Opirus assembled?
The executive sedan Kia Opirus was the predecessor of the Kia Quoris, the most expensive car of the Kia concern. Release Kia Opirus was discontinued in 2010, and before that it was assembled exclusively at the "root" plant of the Kia company - in South Korea. However, Kia Quoris going to Kaliningrad.
Assembly of Kia at the South Korean Automobile Plant
Where is the Kia Optima assembled?
One of the best-selling Kia models in our country, Kia Optima, has been assembled in Russia since November 2012 at the same Avtotor plant in Kaliningrad.
Where is the Kia Sorento assembled?
A mid-size SUV that is quite popular in Russia (and abroad), especially its previous generations, the Kia Sorento is currently assembled at the Avtotor plant in Kaliningrad, and some time ago it was also assembled at the Izh-Avto plant. Models for other countries are mostly assembled in Slovakia, as well as in Turkey.
Where is the Kia Soul assembled?
The Kia Soul model with an unusual design for Russia is assembled at the same Avtotor plant in Kaliningrad. In addition, the model for other relevant markets is assembled in Kazakhstan (Ust-Kamenogorsk), China and, of course, in South Korea - the homeland of the Kia brand.
Where is the Kia Sportage assembled?
The Kia Sportage crossover is assembled at the Avtotor plant in Russia, and before that it is partially assembled in Slovakia at the car factory Kia Motors Slovakia" (only about 30 car parts are assembled in Russia). One of the first generations of Kia Sportage was produced in Germany.
Although company KIA has been producing cars since the middle of the last century, in European countries, in America, its products began to be in demand not so long ago. There are also motorists who believe that Korean and Chinese cars are of the same type. In fact, the models of manufacturers from Korea in terms of their reliability and comfort are not inferior to the products of famous European and American brands. Consumers deciding to buy korean auto, consider it necessary to ask which country the KIA manufacturer is, realizing that the build quality depends on this. Practice shows that machines manufactured in the company's branches practically do not differ from models made in Korea.
Historical milestones of KIA
The first KIA car was the Sibay. The name of the model was not chosen by chance, it is translated as “beginning” or “start”. He saw the light in the 50s of the last century. Designers developed cars using American army jeeps as an example.
Debut model in the series cars became Brisa. She was born in the early 70s. The prototype of this car is Mazda. Later, KIA designers also used licenses from large concerns to create own machines: Fiat, Peugeot.
In the 90s, KIA cars began to be in demand in the USA and Europe. But the crisis that began in Asia at the end of the century led to the bankruptcy of the company. It was acquired by Hyundai concern. However, this was not the end of the brand's history. On the contrary, her models have acquired their own “face”, gained well-deserved popularity, and are successfully sold in many countries. The head office of KIA is located in the capital of South Korea, a network of branches is open in Europe, the USA, and Russia.
Countries where KIA is assembled
For car enthusiasts who want to know which country is KIA manufacturer, it is worth deciding on the brand model, since each of them has its own branch.
- KIA RIO - in addition to the main plant located in Korea, this popular car is produced in several branches in: India, Thailand, Iran, Vietnam, Indonesia, China. In Russia assembly of KIA Rio is carried out in Kaliningrad. The issue is handled by Avtotor.
- KIA Cee'd - popular car golf class. The car is produced at the main plant of the concern, as well as in Kazakhstan in the city of Ust-Kamenogorsk, at the Avtotor enterprise in Kaliningrad.
- KIA Cerato- sales leader in Russia. The model was previously assembled in Korea. Now the car is produced by a plant in Ust-Kamenogorsk (Kazakhstan), in the USA (a branch of KIA Forte), in Russia.
- KIA Clarus - is produced directly on the main conveyor of the concern in South Korea. A certain number of models were produced by the Avtotor plant.
- KIA Mohave - the car was developed for the American consumer. However, this model has become popular in other countries. It is produced not only in South Korea, the USA, but also in Ust-Kamenogorsk, at Avtotor.
Serial production started at the plant in St. Petersburg KIA Rio fourth generation KIA Rio new the fourth generation, like its predecessor, is produced using a full cycle technology with welding and body painting and a high level of localization - 47%. In just 6 years of production, the plant produced 568 thousand third-generation KIA Rio cars. Kia sales Rio new generation will begin in August 2017 in all dealer centers KIA Motors in Russia.Other KIA models are also assembled in Kaliningrad: Soul, Sorento, Sportage.
- News
Moscow, July 4, 2017 - Serial production of the new generation KIA has started at the Hyundai Motor Manufacturing Rus (HMMR) plant in St. Petersburg. Top it off final assembly was preceded by a long period of preparation, during which the car was adapted to Russian conditions and everything is fine production processes to provide highest quality product.
KIA of the new, fourth generation, like its predecessor, which was assembled at the plant in St. Petersburg in the period from 2011 to 2017, is produced using a full cycle technology with welding and body painting with a high level of localization - 47%.
In 2016, in preparation for the launch of the production of the fourth generation KIA, the plant carried out a significant re-equipment and thorough preparation of production lines. Thus, new industrial robots were additionally put into operation in the welding shop, the employees of the stamping shop inspected tooling in Korea before it was sent to the Russian plant. Since the design of the new KIA is significantly different from the previous generation, the paint shop staff have reconfigured all paint line robots and noise reduction robots. In the assembly shop, several sections of the conveyor were reorganized. Employees of the quality control department conducted an audit of foreign and Russian suppliers and made proposals for improving the design of a number of components. The company has been trained to work with new model for employees of all production departments directly on the spot. In addition, engineers and technical specialists of the Russian plant underwent special training in Korea.
The new KIA, like its predecessor, was developed specifically for the Russian market, taking into account local operating conditions and the wishes of Russian customers.
Development tests of the prototypes of the new model were carried out jointly by the plant engineers and colleagues from the KIA Motors research center in Namyang, Korea to achieve best adaptation new KIA to difficult climatic and road conditions Russia. As part of the tests new Kia passed more than 850 thousand km. V different regions Russia, including Karelia and the Murmansk region in the North, the Krasnodar Territory in the South, as well as the mountain roads of the Elbrus region. The model has been tested in extreme temperature conditions Russian winter and hot summer.
Plant "HMMR" produces cars brands Hyundai and KIA and has the most modern industrial equipment. High-precision execution of all welding points on the body, as well as all application operations paintwork outside and inside the body are fully automated, which ensures high level quality. In total, the plant has more than 240 industrial robots. When welding KIA bodies more than 170 are involved, and more than 50 robots are involved in painting. For the release of one car KIA factory need about 16 hours. After production, each car undergoes a thorough quality check of the finished product, which takes more than 2 hours.
The company employs 2,200 people, another 5,800 people work for Russian factories auto parts suppliers. Deliveries of components to the conveyor are carried out by 14 Russian companies. The plant effectively uses production capacity, working steadily in 3 shifts, 5 days a week, due to the high demand for manufactured models.
Plant "HMMR" began production of the third generation KIA in August 2011. During this time, the model has become the most popular in the KIA line and has become one of the leaders in sales in the Russian market. In just 6 years of production, the plant produced 568 thousand KIA
When buying a car, one of the key criteria is the place of its assembly. Many parameters depend on this - the level of adaptation to local roads, quality and even technical characteristics of the vehicle.
With increasing demand major manufacturers open factories in many countries of the world.
The South Korean company KIA, which has a wide geography of factories, is no exception.
Where are these cars manufactured? Where do cars come from to the Russian market?
General information about KIA
Concern Kia Motor Corporation- South Korean brand, which is the 2nd largest brand in South Korea and is among the top ten largest companies peace.
The year of foundation is considered to be 1944, when the new enterprise became part of the Kia Group. The full spin-off into an individual unit took place in 2003.
At first, the company was called KyungSung Precision Industry, and only since 1951 it was renamed KIA Industries.
The initial line of work of the newly created structure is the manufacture of two-wheeled vehicles (motorcycles and bicycles).
Only since the 70s of the last century did the production of passenger cars and trucks. In less than 20 years of activity, the millionth car rolled off the assembly line.
In 1998, the company was affected by the financial crisis associated with a decrease in consumer ability and a drop in sales.
During the same period, Kia lost its independence and was acquired by another manufacturer, Hyundai. A year after the merger, it formed Hyundai Kia Automotive Group.
The turning point was 2006, when Peter Schreyer, a German designer involved in the development of many models from manufacturers such as Volkswagen and Audi, got a job at Kia Motors.
In just four years (from 2008 to 2011), Kia's vehicle sales jumped 81 percent, with total sales of 2.5 million vehicles a year.
Today, KIA continues to gain momentum, offering the world more and more new models.
With the rise in popularity KIA cars company representatives were forced to expand production. So, since 2005, Spectra models have been produced in Russia at the IzhAvto plant, since 2006 - Rio, and after some time - Sorento.
Already by 2010, the production process of cars at this plant was stopped, but a few months later the plant resumed work for a couple of months to produce a small batch of Sorento and Spectra in order to cover IzhAvto's current obligations to the South Korean brand.
Another assembly site is Avtotor (Kaliningrad), where following models KIA - Sid, Sportage, Soul, Sorento, Cerate, Venga and others.
Avtotor plant in Kaliningrad.
The mentioned companies were engaged only in production, and KIA Motors performed distribution tasks.
Thanks to the established production, for several years, starting from 2010, brand KIA is the leader in sales in the Russian Federation among foreign cars.
Since 2011, the production of Kia Rio cars, optimized for local operating conditions, has started in St. Petersburg.
The machine was based on the platforms of two famous cars from Hyundai (i20 and Solaris).
Already the first years showed the success of KIA Rio in the Russian market. In 2014, sales of this model exceeded 10,000 units every year.
In which countries and where is Kia Sportage 2016 assembled, factories in Russia
The Kia Sportage car, due to its characteristics, is in great demand in Russia. One of the factors is the presence of a plant on the territory of the Russian Federation, which produces cars adapted to more stringent operating conditions.
Initially KIA Sportage were assembled at German factories, after which a large share of the production "migrated" to South Korea, Kazakhstan, Indonesia, Slovakia and Russia.
Indonesian-made cars do not reach the Russian market, but domestic motorists have a chance to buy a Sportage recent years release, produced in Kazakhstan, Slovakia, Russia and Korea.
To find out in which country the car was assembled, just look at (located on the windshield).
The first letters can be:
- KNE - South Korean production;
- XWE - car made in Russia;
- U5Y - Slovak assembly.
Production in Slovakia began in 2000. The plant in Zilina covers an area of 223 hectares, and the number of employees exceeds 3,000 people. The total output is 300 thousand cars annually.
Kia Sportage is also produced in Russia, at a plant in Kaliningrad.
When buying a car, you should know that the main assembly process of the KIA Sportage takes place in Slovakia, after which the car is disassembled into car kits and sent to the Russian Federation for SKD assembly.
For comparison, when assembling a car in Slovakia, 2000 operations are performed, and the Russian Federation - 20.
But such limited participation is not in vain, and buyers have serious complaints about the build quality.
Most often, complaints relate to the adjustment of doors that do not open and close well. By the way, cars Korean assembly no such defects.
One more problem domestic version KIA Sportage - incomplete filling of the air conditioner and excessive bending of one of the tubes in the refrigerant circuit.
For this reason, additional noise may appear during the operation of the air conditioner, which is eliminated under warranty.
In which countries and where is the Sorento assembled, factories in Russia
The car is assembled in many countries - in Turkey, South Korea, Slovakia and Russia.
By the way, in Russia Kia Sorento has been produced since 2013, and the main place of manufacture is the Avtotor plant (Kaliningrad).
Rumor has it that AvtoVAZ will eventually produce the model, but so far these are just dreams.
The main production is located in South Korea, but these cars reach Russia in limited quantities (via Vladivostok). In most regions, cars from the Avtotor plant predominate.
There is a lot of discussion about quality Russian assembly KIA Sorento. When compared with models from Turkey, Russian version nothing worse.
This is easy to explain, because machines are produced at the same facilities. BMW brands whose quality is strictly controlled.
The Russian assembly of KIA Sorento is characterized by a number of other features:
- All spare parts in the production process are supplied from Korea;
- Body rolling in the manufacturing process is under strict control;
- Employees for serious misconduct may lose their jobs. In addition, employees regularly attend refresher courses;
- The conveyor is fully automatic. At the same time, the quality of each part is necessarily checked.
In which countries and where is Sid assembled, factories in Russia
Auto KIA Ceed\'s is positioned as a car for Europe. At the same time, the model replaced the already outdated cerate.
Kia Sid cars are produced in many countries. The main supplier for Europe is a plant in Slovakia (the city of Zilina).
KIA Ceed\'s enters the CIS market from Kazakhstan (the city of Ust-Kamenogorsk). The needs of the inhabitants of the Russian Federation are covered by the Kaliningrad Avtotor plant.
It should be noted that initially Kia model Sid has been targeting the European market. That is why the main focus is on large plant located in Slovakia.
The process of preparation for production and the release itself took place in several stages:
- In May 2006, the Slovak plant began work;
- In December 2007, the production line officially opened. In addition to the machines themselves, transmissions and motors are produced;
- In October 2008, the 100,000th Kia car Ceed\'s.
After some time in Kaliningrad (at the Avtotor plant) it was possible to establish a SKD assembly.
A feature of this plant is a great experience in the production and assembly of many other brands of cars - BMW, Cadillac, Chevrolet, Opel and others. The shop where KIA Ceed's is made today used to make Chevrolets.
Special attention when choosing a machine is given to the build quality. As for the KIA Sid cars made in the Russian Federation, there are no serious complaints here. Each car after production undergoes additional checks and tests.
At the same time, the company's administration personally monitors quality control and is directly responsible to the leaders of the concern.
Since the beginning of the assembly of KIA Ceed \'s at the plant in Kaliningrad, one of the employees was a representative of the Slovak plant.
At the same time, it is no secret that the cars “originally” from Slovakia are of the highest quality, because they are produced for the most part for the Russian market.
Since 2010, Avtotor has launched the production of a new line of cars. Externally, the model has not changed much, but some changes still occurred.
The new KIA Ceed\'s has a system exchange rate stability, cruise control and dual zone air conditioning. In addition, the number of airbags has grown to ten.
As mentioned above, large-scale assembly is underway in Kaliningrad (including for Kia Sid). The main work is carried out in Slovakia, from where practically finished cars come to the Russian Federation.
At the Kaliningrad plant, a motor, chairs, wheels and rear end salon.
The main task for manufacturers is to reduce taxation costs, production costs and the final price for consumers in this way.
In which countries and where is Rio assembled, factories in Russia
The issue of machine assembly and its quality deserves special attention. So, KIA Rio has been on sale since 2000, including in Russia.
Initially, the assembly took place in South Korea (which is where the cars came from to the domestic market). KIA Rio of the Russian assembly appeared only in 2005.
The IzhAvto plant, which worked for only five years, took up the creation of the model. When production was restarted in 2011 (for the “additional release” of some models), KIA Rio was no longer assembled.
There are also facilities for the production of KIA cars in Kaliningrad, but due to the lack necessary equipment for the production of the model, the release process of Rio at Avtotor was short-lived.
Since 2011, KIA Rio has been assembled at a new plant in St. Petersburg. At the same time, the Russian version of the car was significantly different from those versions that were sold in Europe.
The only similarity is the appearance, but otherwise the car was redesigned for use on Russian roads.
In addition to Russia, Kia Rio is produced in many parts of the world. The main capacities are concentrated in South Korea, where there are five plants. In addition, the machines were produced in the following countries - Ukraine, Turkey, India, China, Indonesia and others.
In the Russian Federation and China there is only one Rio assembly shop. In the USA, the model has been produced since 2009, and in Slovakia since 2006.
As for the quality of the Russian assembly, here the main complaints relate to the quality of the screw pull and the uneven gaps.
In addition, for Russian version Kia Rio is characterized by the presence of heat shrink or electrical tape in certain areas of the wiring.
Sometimes complaints are received plastic panels(there is a marriage) and excessive creaking of the seat backs. In addition, domestically assembled KIA Rio has problems with sound insulation.
Many car owners have to do.
In which countries and where is Optima assembled, factories in Russia
Another noteworthy model is Kia Magentis, known in Russia as Optima.
The production of this KIA model started in 2000. The first generation cars were sold under the name Optima, but in 2002 the Canadian and European market received a car with a new name - KIA Magentis.
In the South Korean market, second-generation cars had other “names” - K5 and Lotze.
The third generation of cars has been produced since 2010, and it was from this period that KIA Optima received worldwide recognition.
Since 2010, it has been gathering in Izhevsk Kia Spectra, the quality of which was very decent. So, after some time, the release of another model was launched -.
There is an opinion that these cars are produced only in South Korea. But this is a misconception. This state of affairs took place until 2014. Now the car is assembled not only in the Russian Federation, but also in the USA.
European factories that would produce KIA Optima, no, because South Korean capacities are enough to cover current requests.
In Russia, KIA Optima is produced at Avtotor (Kaliningrad). The plant has a well-established production and a wide staff of experienced employees.
As with other models, the emphasis is on SKD. At the same time, complete units come from the territory of South Korea.
The key point for many car owners is build quality. Here it is worth highlighting the following points:
- In Russia, the car is assembled from large units that are debugged and tested;
- The quality of ready-made transport is closely monitored, which nullifies the appearance of marriage on the market;
- In the USA (Georgia) KIA Optima is produced for domestic consumption. In this case, the assembly scheme is the same as in the Russian Federation. If we compare the final result, there is almost no difference. The only thing that differs is the packaging.
In which countries and where is Cerato assembled, factories in Russia
The KIA Cerato model is a worthy representative of the South Korean brand. The car belongs to the category of the middle class, was first introduced in 2004.
Cerato 2nd generation appeared four years later, in 2008. The third generation - in 2009. Since the appearance of the new model, the geography of production has gradually expanded.
The car was produced in India, Iran, Ecuador, USA, Russia, Ukraine and a number of other countries.
As for the KIA Cerato, the first and second generation of cars were produced in South Korea, and since 2006 - in the USA. Since 2009, when the 3rd generation cerate appeared.
At the same time, the manufacture was entrusted to a number of other countries (including Russia).
The Asia Auto plant in Ust-Kamenogorsk (Kazakhstan) joined the work, where SCD assembly was carried out.
The bottom line was that the factory received ready-made components that were assembled within a few hours by the factory workers.
In Russia, the production of KIA Cerato is carried out by the Avtotor plant located in Kaliningrad. Previously, only large-scale assembly took place, but since 2014 a full cycle has been established.
In which countries and where is Soul collected, factories in Russia
Model KIA Soul- a compact mini-SUV, the first sales of which in the South Korean market began in 2008. It was then that the car was presented at the Paris Motor Show.
Interestingly, the car does not fit into any particular class, but most often the Soul refers specifically to the mini-SUV.
The main feature of the model is a high level of comfort for passengers and a huge trunk, which becomes even larger when the seats are folded down.
IN Europe KIA Swale appeared only in February 2009, and in the US - since April.
For the Russian consumer, KIA Soul is assembled at three plants:
- In Kaliningrad - "Avtotor";
- In Kazakhstan - "Asia Auto";
- In South Korea.
There is information that KIA assembly Soul is also conducted in China, with which Russia has long established a close partnership. Cars from China are exported to many parts of the world, including Russia.
Are there any build differences? In Kaliningrad, there is a "screwdriver" production, when factory workers assemble ready-made units. Therefore, the quality finished machines does not depend much on the place of production.
In addition, ready-made units also come to China and Kazakhstan, so finding differences in assembly is a difficult task. All that can differ is only the equipment.
Results
As can be seen from the article, KIA cars have a very wide geography of production.
The Russian market gets mainly cars from St. Petersburg, Kaliningrad, Kazakhstan, South Korea and China. Much depends on the model and current demand.
KIA Sportage, Optima 2016: assembly jambs, crooked assemblers.
/div>
