Vehicle identification numbers
The process of continuous product improvement is the hallmark of any mass production. At the same time, with the exception of cases of major design changes to models coming off the assembly line, the results of the modification process are not covered in the car's operating manual. However, the manufacturer draws up numbered lists of manufactured spare parts, which is why the information encoded in the vehicle identification numbers is of particular importance when buying the latter. When placing an order for a required spare part, try to provide the seller with as much information as possible. full information about your car. Be sure to include the model name, year of manufacture, as well as body numbers and power unit.
Vehicle identification numbers
| Another information label is riveted to rear bulkhead inside the engine compartment. In addition to the VIN, the nameplate contains engine and transmission type codes, as well as color code body paintwork. It should be noted that the information contained in the engine identification number placed on the nameplate is different, supplemented by the value of the letter occupying the 8th position in the VIN. So, according to the 4-position code 4G63 from the nameplate, it can be determined that the car is equipped with a 2.0-liter SOHC / DOHC engine, however, there is no information on the configuration of the unit with a turbocharging system, while the presence of the letter U in the 8th position in the VIN code clearly indicates the presence turbocharging devices. The engine type code presented separately can take on the following values: 4G15 - 1.5L SOHC engine |
| In addition to the two information plates listed above, there is a third one, which is a certification label and is fixed on the end surface of the pillar of the left front door of the car. The certification label codes include information about the date of manufacture of the vehicle (the year of manufacture can be determined by the letter occupying the 10th position in the VIN), as well as VIN and data on limit allowable loads to the front and rear axle vehicle (GRVW). The VIN is also entered into the TCP and vehicle registration certificate. The number encodes information about the date and place of manufacture of the car, the year of manufacture of the model and the type of body. |
An identification number engine
| The 4-digit engine identification number is stamped on the front of the unit, in the upper corner of the cylinder block, and corresponds to the engine type code printed on the information plate (see above). The serial number of the unit is stamped next to it. |
Transmission identification number
The transmission type code is stamped on the information plate attached to the rear bulkhead of the engine compartment (see above). The transmission identification number is engraved on a boss molded into the top of the front wall of the gearbox housing.
Drive axle identification number (Galant AWD models only)
The axle code is engraved on the lug molded on the differential case.
An identification number transfer box(Galant AWD models only)
The transfer case is not assigned a separate code. On all-wheel drive (AWD) models, the transfer case number is located on the transmission case.
Emission Control Information Label (VECI)
The VECI label contains information on the location of the components of the emission control systems, specification parameters for setting up individual components and is used in conjunction with a nameplate on which the vacuum hose routing diagram is applied. Labels are usually attached with reverse side hood. In case of loss of information or its discrepancy with the equipment actually installed on the car, a new label can always be ordered at the service center of the car manufacturer.
VEHICLE IDENTIFICATION NUMBER (VIN) LOCATION
The vehicle identification plate (VIN) is located on the top of the bulkhead in the engine compartment.
The identification number consists of 17 characters.
1. World manufacturer identification code (WIC) KMN ( Hyundai Motors Company, Korea)
2. Vehicle lineup (Vehicle line) D: AVANTE XD, ELANTRA XD
3. Model & Series L: Standard (L) or Wagon (W) M: Luxury (GL) N: Deluxe (GLS)
4. Body type 5: five-door sedan
5. Additional system passive safety 3 - Driver side: seat belt with pretensioner (A/Belt) and airbag, Passenger side: seat belt without pretensioner (P/Belt).
4 - From the driver's side and from the passenger side:
pretensioner seat belt and airbag.
5 - Airbag with mechanical control gas generator (Depowered Air Bag)
6. Engine type B: G 1.6 I4 (petrol, in-line, four-cylinder) C: G 1.8 I4 (petrol, in-line, four-cylinder) D: G 2.0 I4 (petrol, in-line, four-cylinder)
7. Steering position (Driver side) P: LHD (Left hand) R: RHD (Right hand)
8. Production year Y - 2000 Model year; 2 - 2002 Model year; 1 - 2001 Model year; 3 - 2003 Model year
9. Manufacturer U - (Ulsan, Korea) 10. Vehicle serial number 000001 - 999999
STANDARD (NOMINAL) VALUE This value is used as a nominal value for evaluating the quality of a part or assembly during inspection, or the value to which o... The engine identification number is stamped on the top edge of the cylinder block on the right side at the front of the engine. INTERPRETATION OF THE IDENTIFICATION NUMBER OF THE ENGINE Identification number ...Other on site:
Light indicators and warning signals
When you turn on the following indicator lights or sound signal proceed as follows: If the vehicle is removed from hand brake then stop and check. Stop and check. ...
Speedometer reducer
THE GENERAL DATA The speedometer reducer is near to the right semiaxis. Removal PERFORMANCE ORDER 1. Raise back vehicle and place on stands. 2. Loosen the union nut and disconnect...
Crankshaft oil seals
Replacement RIGHT OIL SEAL (FRONT COVER SEAL) PERFORMANCE ORDER 1. Remove the crankshaft pulley. 2. Carefully remove the oil seal by prying it out with a screwdriver. 3. Clean the stuffing box and remove all burrs...
Know how to decode VIN Hyundai desirable for every owner of this brand, because a unique code helps to choose original spare parts or find out the past car. All cars have such an identifier, but in this article we will only talk about the product of the Korean auto industry.
What is a VIN?
All motorists have probably heard about this set of signs, but not everyone knows how to use it. In fact, this numerical and alphabetic designation is identification code your vehicle. For the first time, they learned about it in 1977, when American and Canadian manufacturers began to apply it to cars. In most countries, when applying such a code, it is customary to adhere to the ISO 3779 standard, but this principle of vehicle identification is not always observed.
We will now consider the generally accepted encryption. The number consists of 17 characters. In this case, all Arabic numerals and Latin letters are used, except for I, O and Q. This limitation is due to the similarity of the last two letters to each other and the number "0", and "I" is easy to confuse with "1". Moreover, each code is unique, the repetition of the same combination of characters is possible only after 30 years. This approach eliminates the possibility of a fake VIN. In addition, the code contains a check number, so even if the scammers managed to somehow fake the number, it is impossible to guess the encrypted number.
The location of the wine code in the car
In principle, there are no strict requirements here either, although the main places for placing this code are considered to be left side dashboard, under the windshield or on driver's door. At the request of the manufacturer, it can be applied to any other surface. Sometimes VIN is located on the floor under the seat, in the trunk, under the wings of the car, the main thing is that all places, like the number itself, are indicated in the technical documentation. Sometimes this combination of numbers is knocked out in surfaces that are not very convenient for viewing. This is done to prevent hijackers from forging the code.
Typically, the code is applied to a special label or plate by embossing or using a laser, but other methods are also possible. At the same time, the height of the letters is more than 7 millimeters if it is on a part of the car (frame, chassis, body), and at least 4 mm for the label and plate. When the code is arranged in two rows, the transfer should not affect the semantic construction. But in the documentation, only a single-line version is allowed. Despite the fact that there are no special requirements for the design of a VIN, it must nevertheless be durable and preferably well read.
Why do you need a VIN check?
The main task of this number is the identification of the vehicle. Examination VIN Hyundai allows you to know the history of the car–starting from its manufacturer, country, year of manufacture and ending with information whether it is listed as stolen. Therefore, the ability to decipher it is especially important for those who are going to buy a car from their hands, then checking the wine code is almost the first thing to take care of.
When buying a vehicle, be sure to carefully check the VIN specified in the documentation with all the VIN codes on the elements of the car, especially on hard-to-reach ones, since it is almost impossible to fake it there. The check should include not only the decoding of signs, but also visual control. Pay attention to the presence of defects, because if the number is stamped on a special marking table fixed on rivets, then it is impossible to remove such a platform, kill the number and return it back without damaging neighboring elements.
Deciphering the VIN code for Hyundai
Now let's move on to the practical part and consider how Hyundai. The first three characters indicate the country, factory and vehicle type. First comes the letter corresponding to the country where the assembly is made: N - Turkey, K - Korea and M - means that the car was produced in India. Next, the manufacturer is indicated, it can be HMI, HMC and HAOS, they correspond to the letter designations A, M, L. By the last sign in this group, you can determine the type of machine. So, trailers correspond to the letter B, trucks - F, and if in front of you is passenger transport or an SUV, then the letters H, X are marked in the number. If the third letter is J or Y - this is a bus or station wagon, Z characterizes minibuses and trucks, and 8 - cars of the MPV category.
The location is determined by the next (fourth) position. Right-hand drive vehicles are designated A, D, F, G, K, R, T, U. Left-hand drive vehicles are designated C, B, E, J, M, P, S, V, X.
The fifth and sixth positions of the wine code are interconnected and for various models is different. So, if you want to become the owner Hyundai Click, Atoz, Elantra, Getz, Equus, Lavita, GRANDEUR XG, Lantra, Matrix, Libero, Visto, Porter, Terracan, SantaFe, Santro, Tuscani, Sonata(except USA), Starex, Trajet, Verna, then the letter in 5th place characterizes the equipment, and the number following it indicates the type of body. For the remaining models Hyundai, on the contrary, the letter shows the type of body, and the further figure is the configuration option. Below is the transcript.
Standard or, as they say, " empty car» - X, S, L, F, A or number 1, deluxe - Y, T, M, G, B and 2, super deluxe correspond to the symbols Z, U, N, H, C, 3. These rules are common to all models . Now let's get to the specifics. For the above models, the presence of R, E, W, K in the marking means that the car has a top-end configuration, the remaining Latin letters indicate the grand saloon. For everyone else, whose equipment is indicated in position 6, the number 4 corresponds to DLX, and the letters S, T - “standard” and “taxi”.
Having dealt with the decoding of the configuration Hyundai according to VIN, pay attention to body type designations: hatchback (A, D, 3, 5), coupe (E, G, 2, 6), combi (N, P), station wagon (S, T, W, 8), pickup (B, 0), convertible (C, 7), sedan (F, 4), minivan (V). For a limousine and double cabs, sixth place will be "1" or "D", respectively.
The seventh character indicates the class of the machine and its security system. For cars newer than 2009, "1" indicates the presence of front belts with pretensioners and six airbags. The next letter indicates the engine type.
The ninth place is most often the check digit.
Next comes the year of manufacture of the car, here it can be both alphabetic and digital designation. Repetition is possible once every thirty years, for example, "8" is indicated on vehicles released in 1978 and 2008. And according to the eleventh number, the geographical location of the manufacturer is determined. The most common letters are A, C, I, U and denote various provinces of Korea, M - India, Z - Turkey. The production number of the product is the last 6 characters of the VIN code, VIN decoding Hyundai this ends.
We see that checking an identifier is a rather painstaking task, and it is impossible to know all the information listed by heart. To facilitate this process, today there are special Internet resources that contain pivot tables, or even a complete database. Checking in this case comes down to just a set of numbers in the specified field.
