China makes everything, including outboard motors. It must be said that Chinese manufacturers they do not spend much on the development of new engines, new fuel injection systems, new ignition systems. Almost everything is copied from engines of well-known manufacturers.
And perhaps some changes have been made to the design of the motor housing. This is the reason for the low price of Chinese outboard motors. But it must be said that not all Chinese engines are of the same quality.
The highest quality Chinese-made outboard motors are those that are supplied to Europe, the USA, Canada. This is due to the fact that quite stringent requirements are imposed on boat engines in these countries, both in terms of performance and environmental cleanliness.
What outboard motors are produced in China
1. Engines for domestic consumption in China.
Most often, these motors are produced by small manufacturing companies. In order to reduce the cost, metal is used not very good quality, and, accordingly, the resource of such engines is much lower than that of engines manufactured by large manufacturers.
Sometimes these products enter our market, while having a very low price. But such engines almost always require fine-tuning, replacing candles, tightening all fasteners.
2. Engines that are made for export to countries with a not very rigid quality and safety assessment system.
These countries can be safely attributed to all the states that were once part of the USSR. Their quality is higher than that of engines intended for domestic consumption in China, but still lower than the quality of engines of the third category.
3. Engines that are supplied to countries with developed economies that have stringent product quality requirements.
Their quality complies with all standards adopted in the European Union, the USA, Canada. Exactly the same Chinese-made outboard motors enter our markets in a completely legal way. This is the most acceptable option. However, it should be noted that the motor resource of such engines is somewhat lower than that of engines Japanese made. This is due to the quality of the metal used for the production this equipment. Wear of rubbing surfaces occurs much faster.
Which motor to choose
The eternal question, which engine to buy: two-stroke or four-stroke? Two-stroke engines are somewhat cheaper. But if you have to travel frequently by boat on low speeds, almost in the mode idle move, with two-stroke engines there are problems of malfunctioning. This is due to the specifics of the fuel supply and the operation of the ignition system. The engine is filled with candles, it can stall. Therefore, if trolling is supposed to be fishing, it is better to stop at a four-stroke Chinese motor.
Four-stroke engines are more expensive, but at the same time eat up a little less fuel than their two-stroke counterparts. But they do not have the problem of working at low speeds.
What to do after buying a Chinese motor
Completely change the oil in the engine. Even here, the Chinese go to reduce the cost of production and pour oil into the engine very Low quality. Often there is an underfill of oil up to right level. And this can then lead to foaming of the oil, overheating of the motor and, accordingly, to a decrease in the resource.
It is advisable to fully check all nuts and screws for their normal tightening. You will almost certainly have to tighten something.
Check the key on the screw attachment to the motor shaft.
You should carefully inspect the spark plug. Quite often, the candle initially has soot. It is better to change it immediately.
You need to understand that all these problems that are listed above are more typical for very cheap Chinese engines. Those companies that have gained credibility in many markets around the world usually do not allow themselves such liberties. So, it’s better to overpay a little and buy a normal high-quality Chinese-made outboard motor than to mess around with tuning and adjustment later.
similar articles
Boat motors Hangkai is manufactured by Taizhou Gongda Motorcycle Accessories Co. Prior to this, the company positioned itself as a manufacturer of spare parts for motorcycles made in China. Basically, this transition
Sailor outboard motors are typical motors Chinese production. Almost certainly they are copies of American or Japanese-made motors. True, it is not known for certain which models they copy.
You can order the presented products in our online store Rumpel Land. Our company cooperates directly with well-known suppliers, which allows us to maintain affordable prices for products. You can find out the details from our manager at any time convenient for you, and get a free consultation.
Alpha (Allfa)
The first line of the rating is opened by outboard motors of the Chinese manufacturer Alpha.
Motors are practical and durable. The Alpha brand is used only modern technologies in the manufacture of engines. High-quality and reliable components are used in the production process. The presented versions of the engines are resistant to rust formation. During operation, long term service in difficult weather conditions. We have a wide range of engines, so you can easily choose the unit. Models serve for a long time even in the most extreme situations. They have a solid body. Another advantage is low cost.
Toyama
Toyama motors from a Chinese supplier are firmly entrenched in the second line of the rating. Motors have been produced since 1997. The supplier is confident in his products and gives a guarantee for 2 years. These are reliable units that have a drive in three positions - back-neutral and forward. Choose Toima motors in various variations in our store. Regular customers are guaranteed solid discounts.
From distinguishing features motors from a Chinese supplier worth highlighting the following benefits:
. compact dimensions;
. low fuel consumption;
. minimum noise during operation;
. good speed performance;
. the possibility of passing shallow water;
. high quality and reliability during use.
Gladiator
Models Gladiator firmly took the third place in the ranking. The units have high level reliability. Chinese company presents high-quality models at a low price. The products are popular all over the world. The devices are manufactured at Hangzhou Hidea Power Machinery Co. The design includes a three-bladed propeller and a working shaft. Good technical indicators series guarantee quick launch and start from the spot. Overheating of the engine is excluded due to the water cooling system. This results in a long service life. All models are thoroughly tested before shipping. This allows you to minimize and even eliminate marriage. Gladiator motors possess good performance power, unpretentious in maintenance and allow you to easily overcome shallow water.
HDX motors
You can buy HDX outboard motors from us, which are confidently located on the fourth line of the rating. In the manufacture of units, innovative technologies are used. Engines have affordable price and have excellent technical specifications. All presented models comply with international standards. The series includes 2-stroke and 4-stroke versions of motors. The power of some models reaches 40 horsepower. Many varieties can easily withstand the influence of salt water and continue to retain their primary qualities. You can purchase options with a transom length of 381 and 508 cm from us.
Sia-Pro (Sea-Pro)
The company Sia-Pro closes the top five. The power of the junior motors of the series is 2.6 hp. These are 2-stroke and 4-stroke versions with good reliability indicators during operation.
We advise you to pay attention to following models:
. Sea-Pro T 2.6 S - 2.6 hp Ignition type - CDI. Single cylinder 2-stroke engine with manual start system.
. Sea-Pro T 3S is a 2-stroke engine that has a water cooling system. Power is 3 hp.
. Motor Sea-Pro T 8S - 8 hp The total weight of the unit is 27 kilograms - 2-stroke version of the motor.
All presented devices differ in the compact sizes. Mobility and reliability during operation. The materials from which the motors are made can withstand various weather conditions and easily cope with shallow water.
The market for Chinese outboard motors has long been formed quite quality brands, although there are still low-quality and weak representatives on sale. In Russia, Chinese motors for boats are used by most customers, and in order to choose normal motor You don't have to be an expert in this area.
In the range of stores you can find such popular brands as Hidea, Fisher, HDX, Sail, Yamasibi, Sailor. And the choice does not stop there, the assortment is incredibly large. They choose a product according to which is the most reliable Chinese outboard motor, then look at the price and characteristics. Sometimes it is better to choose a less powerful model, but with a good reputation and high reliability.
Also keep in mind that most brands from the Middle Kingdom do not want to create their own unique developments, so many technologies are taken from other popular manufacturers. Most noticeable is the copying of well-known motors from Mercury and Yamaha, which can also be called a plus. Indeed, sometimes it is better to buy a cheaper motor with the same characteristics, especially if the budget is limited.
Features of Chinese motors
Many choose Chinese products precisely because of the cheap cost, so many models are used around the world. The production technology is quite simple - the manufacturer takes the technology already created by well-known brands, uses cheaper labor and lower quality spare parts.
Although some manufacturers partially purchase parts from American and Japanese manufacturers. Unfortunately, every year the number of branded spare parts in Chinese engines is reduced due to the high final cost.
Should I trust Chinese boat technology? Many people have stereotypes that Chinese motors break down quickly and are not suitable for Russian use. In fact, a couple of brands are able to compete with American manufacturers, which has long been proven. The reliability of such motors is confirmed by the passage of each batch of international certification, because before the release of the model, all components and parts are carefully checked.
When buying a Chinese outboard motor, it is important to consider the reputation of the manufacturer. It is better to choose models with less power, but with a good reputation. It is also necessary to remember that many Chinese brands do not want to create something exclusive, and copy the models of their well-known competitors. Therefore, you can buy products with the same characteristics, but at a lower cost. Many Chinese manufacturers use American or Japanese parts. But thanks to the lower cost of labor force, the cost of the final product is several times less than that of their American or Japanese counterparts. The main indicator good motor, is considered power. They are available in the following categories:
- from 2 to 6 hp;
- from 7 to 15 hp;
- from 15 hp
In the first case, he will be able to accelerate the ship to a speed of 10 km / h. They do not cope well with the current, so it is better to use in calm waters. In the second case, we are talking about models that have 2 cylinders. With such a motor, you can move at speeds up to 30 km / h. Well, the latter option is great for use on large ships or for transporting large cargo. But for lovers of hunting or fishing, it is better not to use them, as they consume a large number of fuel.
What is the power of Chinese outboard motors?
Before buying, the boat owner should evaluate how high the requirements for the outboard motor are. The main indicator is the total power produced by the motor. Keep in mind that the most unverified brands may lie a little about power, indicating higher figures.
Motors can be divided into the following categories:
- 2 to 6 HP - the simplest and weakest for Chinese motors indicators capable of moving at a speed of about 10 km / h. Motors are bought for use in calm rivers and lakes, they work poorly against the current.
- From 7 to 15 hp - can have up to 2 cylinders, Weight Limit is also within 35 kg. If you put the motor under the right boat, you can develop top speed at 30 km/h. Great option for long-distance races on medium-sized reservoirs.
- From 15 hp - quite powerful units and are suitable either for transporting goods or for professional purposes. Motors for amateur fishing or walking are not suitable, because they consume a lot of fuel. Also known for high top speed.
Which Chinese brand to choose?
Based on numerous reviews, we have compiled a rating of trusted brands from China. Let's take an example of a pair of manufacturers.
Sail
Pretty well-known brand with a large range, head and reducer show excellent performance and reliability, but sometimes the reliability of electronics is lame. This is probably due to the fact that the Chinese have not achieved the knowledge that Japanese engineers have. It makes no sense to compare with Japan and America, but in its price category this is one of the leaders. The motors work out their cost by 100%, the reviews are mostly positive.
Hondex
An excellent proven brand, one of the leaders in Europe and can boast of having international quality certificates. Prices are quite affordable for residents of Russia, power can be selected from several models. The simplest and most interesting is the Hondex 2.5 BMS outboard motor, it received an engine capacity of 75 cm3, it is provided fuel tank 5 liters, the start is carried out manually. According to the standard budget model controlled by a tiller.
You can pay attention to the F5 BMS model, the working volume has increased to 112 cm3, the built-in tank was 3 liters. The quality and reliability of the motor is one of the best, it works in 4-stroke mode and has a quite average weight of 24.5 kg.
Parsun
Relatively new brand on Chinese market, but already presented himself quite well interesting models With various characteristics. Interesting is the fact that the motor is sold in the US and Canada.
Important! The Parsun brand is featured on Russian market under a different name - Golfstream.
An interesting representative of the middle class is the T2 BMS engine, which operates in 2-stroke mode and has 1 cylinder. A more advanced and powerful model can be called F2.6 BMS.
Video
Buying a boat motor significantly expands the possibilities of fishing and provides many advantages compared to the usual rowing method of transportation. Since safety depends on the performance of the motor, it is unacceptable to rush when choosing it. There are eminent brands that have proven themselves for many years as the most reliable around the world, but there are also good ones. budget options. The rating according to the Mark.guru portal will help you choose the best model of the outboard motor in 2018.
To choose the right motor that is best suited to your boat, you need to compare them according to the following criteria:
- Power. Similarly car engines expressed in horsepower. The choice depends on the characteristics of the boat itself: material, dimensions, number of people transported.
- Size. To avoid a roll on back boats, you can not take too large and heavy motor. A capacious fuel tank significantly increases the space occupied by the engine.
- Deadwood length. It refers to the distance from the propeller to the engine. Incorrect selection will lead to power losses, high water resistance and poor handling.
- engine's type. There are two and four strokes. The first is more productive, weighs less and is easier to repair due to the simplicity of the design. Four-stroke runs more evenly and more stable. They are quieter and consume oil and fuel more economically, the resource of such engines is much higher.
- Control system. It can be tiller or remote by means of a transmission mechanism. The first is more reliable, and the second is used on long boats.
Small motors
The category includes two-stroke boat engines up to 5 horsepower. They have tiller control and manual start. Suitable for small boats, they are compact and economical. At the same time, they have sufficient power, relatively low price and have no toxic exhaust.
1
This is the best outboard motor among low-power models. It is one of the most environmentally friendly, meets international and European standards. It is capable of operating at temperatures down to -7 degrees Celsius, including in dirty water. This compact and lightweight Chinese is popular all over the world for its high performance and reliability. Motors are available in different colors: camouflage, white and dark. Lubrication is carried out by pre-mixing, applied water cooling. The engine is equipped with an electronic ignition system and an emergency switch.
The model is more convenient than its predecessors thanks to the wide-opening hood and throttle located on the tiller.
Technical data:
- 2.6 hp;
- forward and neutral gears;
- transom S (381 mm);
- up to 4200 rpm;
- volume 50 cm3;
- one cylinder;
- fuel tank 1.2 l;
- 3-bladed aluminum propeller.
Advantages:
- the best price-quality ratio;
- neat assembly;
- good traction;
- economy.
Flaws:
- small fuel tank, you need to carry a supply with you.
Average price: 18300 rubles.
Prices :
2
In second place is the outboard motor of the American brand of Chinese production. Suitable for small boats up to 3 m long. Adjustment of turns is carried out by means of a multipurpose handle. The possibility of smooth adjustment allows you to accurately select the desired pace of movement. Good hydrodynamics ensures low resistance. The engine is water cooled electronic system ignition and emergency switch engine. It is also possible to adjust the angle of the motor. Operating temperature range from -20 to +40 degrees, mixed type of lubrication.
Technical data:
- 2.2 HP;
- up to 4200 rpm;
- transom S, 420 mm;
- volume 52 cm3;
- one cylinder;
- fuel tank 1.2 l;
- metal 3-bladed propeller.
Advantages:
- light and compact;
- economical;
- inexpensive.
Flaws:
- According to some reviews, it overheats during long work.
The average price is 14,000 rubles.
Prices :
Two-stroke motors with a power of 5 hp.
Among the engines of 5 horsepower, Chinese-made models are in the lead. They are functional, reliable, at the same time compact and have small weight. All models have tiller control. They are good to choose for fishing trips on small inflatable boats.
1
The Toyama motor is the best low cost solution in the category. This is a Japanese brand, but the products are assembled in China. It is characterized by high reliability and stable performance. A mixed type of lubrication is used and water cooling. There are forward, reverse and neutral gears. The engine start is manual, there is an electronic ignition system and an emergency shutdown.
The motor tilt adjustment system makes it easy to move in shallow water.
Technical data:
- up to 5500 rpm;
- transom S, 381 mm;
- volume 102 cm3;
- fuel tank 2.7 l;
- 3-bladed aluminum propeller.
Advantages:
- decent build quality;
- good resource.
Flaws:
- rapid consumption of fuel in the tank.
The average price is 42,000 rubles.
Prices :
2
In second place in the ranking is very similar in characteristics chinese model HDX outboard motor. It is easy to maintain, reliable and light in weight. Ideal for small boats. Unlike previous model is a much less capacious fuel tank and the lack of a system emergency shutdown. It has manual start, electronic ignition system and three gears.
Technical data:
- up to 5500 rpm;
- 102 cm3;
- fuel tank 1.5 l;
- 3-bladed propeller.
Advantages:
- compactness;
- a light weight;
- reliability.
Flaws:
- small fuel tank;
- no emergency shutdown.
The average price is 44,000 rubles.
Prices :
4-stroke engines with 5 hp
The category includes 5 horsepower models with the best operational characteristics. All have tiller control and manual start. The price falls into the category up to 100 thousand rubles. The most expensive are Japanese and american models, but the Chinese are increasingly taking high positions in quality and reliability, significantly winning in price.
1
The best motor in the category is compact model from Honda. She has tiller control and the possibility of reverse. It has a lightweight design and an ergonomic carrying handle. At the same time, it has high efficiency and work safety. Shows excellent traction at low and medium speeds. It has three gears, underwater exhaust, emergency shutdown system. Thanks to the locking system, the engine cannot be started when the gear is engaged. A separate lubrication system is used, there is an oil pressure indicator.
The engine has a 4-layer outer coating that provides reliability and durability. Includes acrylic resin coating, epoxy primer, dual layer anodizing and Honda's signature aluminum alloy.
Technical data:
- 5000 rpm;
- transom S, 381 mm;
- deadwood 447 mm;
- 127 cm3;
- 550 ml oil tank;
- fuel tank 13 l;
- 3-bladed propeller;
- 1.2 l/hour.
Advantages:
- high-quality Japanese assembly;
- reliability;
- functionality;
- profitability;
- low noise and vibration levels.
No deficiencies found.
The average price is 95,000 rubles.
Prices :
2
Second place is also occupied by the Honda engine. It is an excellent solution for fishing or short walks, it is installed on 2-3 seater aluminum and inflatable boats. It has an underwater exhaust, the tiller is protected from vibrations. There is an emergency braking system, forward, reverse and neutral gears. There is also the possibility of adjusting the angle of inclination, emergency stop and oil pressure indicator. Mixed lubrication system, water cooling type. A positive feature of the model is the presence of a current generator that allows you to charge batteries.
Technical data:
- 5000 rpm;
- transom S;
- deadwood 445 mm;
- 127 cm3;
- 12 l fuel tank;
- 3-bladed propeller.
Advantages:
- reliable;
- safe;
- good traction;
- low noise and vibration levels;
- capacious tank;
- compact.
Flaws:
- difficult to maintain.
The average price is 100,000 rubles.
Prices :
3
Ranked third the best motors model of the American brand Mercury. It has a small fuel tank, but can be equipped with an additional one. A plug-in generator is also available as an additional option. The engine is compact and has a convenient carrying handle. It is easy to operate thanks to the rotating handle. It has water cooling, separate type of lubrication, forward, neutral and reverse gear.
The motor is well suited for shallow water operation, as the propeller is raised without reducing efficiency or compromising cooling.
Technical data:
- 5500 rpm;
- transom S, 381 mm;
- 123 cm3;
- fuel tank 1 l;
- 3-bladed propeller.
Advantages:
- ease of management;
- maneuverability;
- compactness;
- reliability;
- functionality.
Flaws:
- small fuel tank.
The average price is 69,000 rubles.
Prices :
4
Motor brand Toyama has already met in the ranking in the category of the best two-stroke engines. IN this case its 4-stroke modification is presented. The engine is heavier and somewhat less dynamic. It has tiller control, water cooling, front, rear and neutral gear. Safety is guaranteed by an emergency stop system.
Technical data:
- 5000 rpm;
- transom S, 381 mm;
- 112 cm3;
- fuel tank 1.1 l;
- 3-bladed propeller.
Advantages:
- good quality for a reasonable price;
- functionality;
- good traction.
Flaws:
- small fuel tank.
The average price is 48700 rubles.
Prices :
5
The rating is completed by another reliable Chinese from HDX. The brand has established itself throughout as quality and trustworthy. This model characterized low level noise and high efficiency. A small fuel tank provides a solid range. The engine copes with its tasks perfectly even in conditions of heavy loading of the boat. It has water cooling, mixed type lubrication, three gears and an emergency stop.
The engine features a robust aluminum alloy, specially made for use at sea and guaranteeing good protection against corrosion.
Technical data:
- 5000 rpm;
- transom S, 381 mm;
- 112 cm3;
- fuel tank 1.3 l;
- 3-bladed aluminum propeller.
Advantages:
- quiet work;
- profitability;
- reliability;
- compactness;
- good performance.
No deficiencies have been identified.
The average price is 49200 rubles.
Prices :
Motors up to 10 HP
Among the best motors up to 10 hp. Japanese, American and Chinese models are presented. They can be of two or four stroke type. The main characteristics that allow you to take a leading position are reliability and stability. Weight and economy are also important.
1
The best motor in the category up to 10 hp is a model Japanese brand Tohatsu. Many people compare its products with the Yamaha brand, but Tohatsu significantly gains in weight while maintaining high reliability and performance. The engine runs smoothly, consumes fuel slowly and is easy to operate. Among the useful technical solutions it is worth noting the start lock when the gear is engaged, a thermostat that stabilizes the temperature and a digital ignition system. It has water cooling, mixed type lubrication and three gears.
The Tohatsu model is the only one in the world outboard motor so low weight, giving out a full power of 9.8 hp. The closest competitor, the Yamaha 8 C, weighs a kilogram more and achieves only 8 hp.
Technical data:
- 9.8 hp;
- 6000 rpm;
- transom S, 381 mm;
- deadwood 435 mm;
- push-pull;
- 2 cylinders;
- 169 cm3;
- fuel tank 12 l;
- 3-bladed propeller.
Prices :
2
The American model enjoys high popularity in our country due to high power, which at the same time by 0.1 hp. less than the one at which the boat must be registered and the corresponding taxes paid. This is a 4-stroke unit with a high resource and good efficiency. The engine runs smoothly and allows you to accurately control the speed of the boat. It has water cooling, a separate lubrication system and three gears, there is an overheat indicator.
The multi-function tiller allows you to control the throttle, change gears, stop the engine, and raise and lower the engine as needed.
Technical data:
- 4 stroke;
- 9.9 hp;
- 6000 rpm;
- transom S, 381 mm;
- 2 cylinders;
- 209 cm3;
- external fuel tank 12l;
- 800 ml oil tank;
- 6 A generator;
- 3-bladed propeller.
Advantages:
- reliability;
- quick start;
- good protection against corrosion;
- low noise level;
- high power.
No deficiencies have been identified.
The average price is 135,000 rubles.
Prices :
3
The top three is completed by another Chinese model from Hidea. Specially designed for the Russian non-registration segment, it is highly durable and reliable protection from overheating. The motor is easy to transport and install on low boats thanks to compact size and relatively light weight. It has a mixed type of lubrication, water cooling, three gears and tilt adjustment.
Technical data:
- 2-stroke;
- 9.8 hp;
- 6000 rpm;
- transom S, 381 mm;
- one cylinder;
- 169 cm3;
- external fuel tank 12 l;
- 3-bladed propeller.
Advantages:
- affordable price;
- profitability;
- functionality;
- low noise level;
- relatively light weight.
Flaws:
- poor build quality.
The average price is 64,000 rubles.
Prices :
High power models
The category includes motors with a capacity of 15 to 20 horsepower. These are expensive japanese models with advanced functionality and high performance. They are able to withstand heavy loads, reliable and durable.
1
Category leader powerful motors is another representative of the Japanese brand Honda. This powerful model With high efficiency allows small craft to maneuver easily in shallow water. Starting is by electric start, there is a manual 5-step control of the angle of inclination. The model is unpretentious to the quality of fuel, there are oil pressure sensors and an overheat indicator.
The engine has effective system cooling, in which the water intakes are located in the direction of travel, which removes part of the load from the pump.
Technical data:
- 20 hp;
- 6000 rpm;
- 350 cm3;
- 4 stroke;
- 2 cylinders;
- fuel tank 12 l;
- generator 12 A;
- 4-blade propeller.
Advantages:
- power;
- reliability;
- functionality;
- low noise level;
- high build quality.
Flaws:
- high price.
The average price is 200,000 rubles.
Prices :
2
In second place in the ranking of the best high-power models japanese motor Suzuki. With high performance, it is compact and lightweight, designed for use by fishermen on plastic and inflatable boats. The company's innovative developments have made it possible to significantly reduce the level of noise and vibration, as well as to achieve high fuel efficiency. Water cooling, separate lubrication system and three gears are provided.
The model is distinguished by the presence injection system injection that does not require a battery.
Technical data:
- 20 hp;
- 6300 rpm;
- 4 stroke;
- two cylinders;
- 327 cm3;
- fuel tank 12 l;
- 3-bladed propeller.
Advantages:
- profitability;
- reliability;
- manufacturability;
- power and controllability;
- quality assembly.
Flaws:
- according to some reviews, sometimes there are malfunctions in the electronics;
- the injection system is difficult to maintain and repair.
Average price: 160,000 rubles.
Prices :
Conclusion
A good outboard motor should have sufficient power and stable job. It must be selected based on the characteristics of the boat and the expected load. The traditional leaders in the world are Japanese manufacturers. Some brands are still assembled in Japan, but many have moved factories to China. Wherein Chinese stamps gradually begin to make them worthy competition. When choosing them, remember that, while inferior in build quality, they are no worse in terms of power, reliability and focus specifically on Russian conditions operation. Therefore are good choice especially on a limited budget.
