The largest Chinese manufacturers of outboard motors. Rating of the best outboard motors

Chinese boat motors appeared on the market not so long ago. However, they were able to quickly gain popularity due to the low price and good quality. To understand which Chinese outboard motor is better, it is not necessary to be an expert in this matter. But before you purchase any option, you should carefully study user reviews in order to choose the most best option.

Today, Chinese outboard motors are on the market in a wide range. And now users make a choice in their favor due to many advantages:

1. Affordable cost. boat motor Chinese made at a price that will cost several times cheaper than a device from another manufacturer.

2. High level of reliability. Chinese brands produce decent products that are not inferior to Japanese and American counterparts.

3. Excellent quality. There is no doubt that the equipment manufactured in China does not meet any requirements or standards, since each unit of production undergoes international certification.
At the same time, everyone can buy such power plants cheaply, which is an undoubted advantage for the consumer.

What should be the capacity of the unit?

Which Chinese outboard motor is better in power also depends on a number of factors. The most important of them is the purpose of use. The following categories can be distinguished:

1. "Weak" - from 2 to 6 hp The speed of such units does not exceed 10 km / h. Moreover, if the boat moves against the current, then it will additionally decrease. Choose similar installations relevant for calm waters.

2. Medium - 7-15 hp This category includes power plants that are more stable, usually they are two-cylinder. As practice and customer reviews show, such units are suitable for long distances. Their weight reaches up to 35 kg.

3. High - more than 15 hp Best of all, such installations are suitable for long distances. In addition, they are characterized by high speed.
Any unit is presented on the site with a photo. This allows you to visually evaluate all the features of the power plant.

The best models among Chinese motors:

There are many variations on the market this manufacturer. However, the best Chinese outboard motors of the following companies:

1. Allfa (Alpha) - produced at the Calon Gloria plant.The company has established itself in the market as a manufacturer of high-quality, light and economical products. Prototypes of power plants are TOHATSU and YAMAHA units. Units and spare parts for them are produced on the production line of the plant of the same name.

2. Toyama (Toyama) is a well-known and high-quality Brazilian brand, the release of which began in 1997. Toyama outboard motors are manufactured by Suzhou Parsun Power Machine Co., Ltd. Toyama is a compact motor with a drive in 3 forward-neutral-back positions. The reliability of the motor, its functionality - in fact high level for units of this capacity

3. Sea-pro (Sia-Pro) - have long and firmly established themselves as great choice for hunting, fishing and long boat trips. They are reliable, stable and maintain an excellent balance between the price of the product and its quality.

4.HDX (Hondex) - If you need to buy cheap power plant, then excellent fit model HDX 2.5 BMS 74.5cc cm, 5 liter capacity, tiller control and TCI ignition, manual start. Wherein this option can be used even in the most adverse conditions. Higher performance HDX F5 BMS four-stroke model with 112cc and 3L tank.

It should also be noted models of brands Marlin (Marlin), Gladiator (Gladiator). From all of the above, it follows that Chinese outboard motors are the best value for money.

Chinese-made outboard motors that began to enter the Russian market were warmly received for one simple reason: their cost is almost half that of equipment suppliers from Japan. Is there really a difference between them? Is it possible to trust the technology that arrived in our country from China?

There is an opinion that China delivers its own equipment exclusively to third world countries. In fact, products from here are supplied to America, Australia, and the eurozone countries. The stereotype of the relatively low quality of Chinese products is gradually becoming obsolete. AND the best of that proof - Chinese outboard motors. The products offered to the Russian consumer today are characterized by worthy performance.

Do not forget that the design of devices of this type does not belong to the category of particularly complex ones. The technology behind two- and four-stroke boat engines is not new. Therefore, technological marriage is hardly possible in the production process.

Each produced motor is subject to international certification, which is another proof of a sufficiently high quality of workmanship.

What PLAs are shipped from China?

So, let's see what unit you can equip your boat with - an indispensable companion for hunting, fishing or during tourist trips to nature. Beyond the description specific models the price of Chinese outboard motors will also be indicated.

Parsun. One of the fastest growing brands, founded in 2002. The highest demand for devices of this brand is recorded in Canada and the USA. It should be noted that those present Russian market Golfstream devices are still the same Parsun, made specifically for the Russian Federation.

The most affordable Chinese outboard motors up to 5 hp. With. from Parsun is Gulfstream T2BMS. The cost of the model is 15,700 rubles. For this money, the buyer receives a single-cylinder two-stroke power unit with manual start and tiller control. By the way, prices for four-stroke Gulfstreams start from 28,100 rubles (model F2.6BMS).

HDX. We can say that representatives of this line (previously the brand name sounded like Hondex) may well claim the title of the best Chinese outboard motors. First, they fully comply with the requirements of American and European quality standards. Secondly, they are fully adapted to the natural conditions of Russia.

Most available model- HDX T 2.5 BMS costing from 25,200 rubles. The working volume of the apparatus is 74.6 cm3. Management - tiller, ignition - TCI, start - manually, fuel tank- built-in 1.5 liters.

Sailor. Inexpensive PLA, characterized by a low level of generated noise and low weight. The practicality that is inherent in them is well worth the money. For example, model GM-T 3.5 is available for 22,500 rubles. Its main characteristics are:

• engine type - single-cylinder, two-stroke;
• working volume - 74.6 cm3;
• ignition - CDI;
• cooling system - water type;
• fuel mixture- 50 parts of gasoline and 1 part of oil;
• weight - 15 kg.

Jetmarine. The development of engineers from China, which was based on the experience of world manufacturers of PLM - Tohatsu and Yamaha. Distinctive features representatives of the line - modern appearance and original design. By the way, products manufactured under the Jet Marine brand can be cited as clear evidence that China has decided to conquer the world market by switching from quantity to quality.

If you are interested in a motor with a capacity of no more than five "horses", equipped with an internal fuel tank, it makes sense to pay attention to the Jet T 5 BMS model (34,000 rubles). There is a three-speed gearbox, electronic system ignition, special fuel pump(helps save fuel and guarantees uptime power unit), a convenient handle for transporting the motor.

There are many motors for boats on the market from different countries. In order for the engine to work without overlays, you need to choose it depending on the type of device and the conditions in which it will work. Today, many people buy outboard motors from China. It's connected with affordable price and high quality.

Rating of the best outboard motors of 2019

To figure out which motor is the best, you need to understand what to expect from it. In some conditions, a low-power engine is suitable, which will consume fuel to a minimum. Powerful models are able to accelerate boats in a much shorter period of time. It should be borne in mind that motors must be registered with the State Inspectorate for Small Vessels (GIMS).

The tax paid is affected by the power of the engine. You can use this for your own purposes. Increasingly popular engines with a capacity of almost 10 liters. With. allow you to save money without losing speed.

The best low power outboard motors

Most weak motors in the review, designed to work in conditions of reduced loads. They are installed on small vessels with low speed.

The main advantage of the model, for which it was put in the first place, is a four-stroke engine. This allows you to get more useful work when burning fuel, which saves money. Since the motor has three horsepower, it is almost always used in the " idling- full throttle.

Advantages:

• Four stroke engine.
• Low fuel consumption.
• Good torque performance.

Cons - Expensive.

An excellent Chinese motor, according to fans, go fishing on a pvc boat in the sea. A striking feature of the model is a high-quality assembly, providing increased protection against corrosion damage.

Advantages:

• Reliable build and high quality details.
• Increased corrosion protection.
• Air filters.

Flaws:

• Expensive.
• The screw is made of polymer compositions.

Easy to use Chinese engine. Due to the fact that the dimensions are smaller than those of similar models, it can be easily transferred. The design includes a durable aluminum screw that is resistant to corrosion. Working in the nominal mode, it can accelerate the PVC boat up to 10 km / h. In addition, the motor consumes only 1.4 liters of gasoline per hour.

Advantages:

• Unpretentious and able to work in all weather conditions.
• Increased torque.
• Inexpensive.
• Suitable for small boats.
• Convenient gas supply adjustment system.

Flaws - A large number of plastic parts requires careful handling.

The second name among the people is "Lawn Mower". This is due to the fact that the volume does not exceed 50 cubic centimeters, and is not capable of delivering more than 2 kW. This is an option for small boats sailing into small ponds and calm rivers.

Advantages:

• Inexpensive.
• Compact.
• Easy.
• Easy to manage.

Disadvantages - Does not tolerate continuous operation. It's connected with bad system cooling.

The best two-stroke motors with a power of 5 hp. With.

The advantages of two-stroke PLM engines are their small size and simplicity of design. This makes them ideal for small boats. In addition, they are easier to use, and repairs will not be too expensive.

The model is not economical, moreover, it does not have increased power. First place among engines in 5 liters. With. he got it for popularity. It can be found in every store, besides, there are always spare parts for sale.

Advantages:

• Ease of operation.
• Good production resource.
• Availability of spare parts on the market.

Flaws:

• Expensive.
• Small fuel tank.

Another model that does not have advantages over competitors, but is very popular and sold. Based on a Yamaha engine. A volume of 102 cubic centimeters allows you to get a good starting and maximum power.

Advantages:

• High-quality assembly and reliable materials.
• Good cooling system, able to work in contact with sea water.
• Tank volume of 2.5 liters. In addition, it is possible to install a modular tank of 12 liters.

Flaws:

• Lack of diesel models.
• Expensive.

Boat motor made in China, almost a copy of the previous position. It has the same characteristics and is assembled from the same materials. The only difference is less availability on the market and the absence of additional modules.

Advantages:

• Cheaper than their counterparts.
• Under good operating conditions, it proved to be a reliable engine.

Disadvantages - Small volume of the tank.

The best four-stroke engines with a power of 5 hp. With.

Many people prefer four-stroke engines to two-stroke ones. This is due to the fact that they have a number of notable advantages, such as:

• Less noise.
• Profitability.
• High-quality combustion of fuel, which increases efficiency.
• Oil does not need to be mixed with gasoline.

They are a little more expensive, but also have noticeable advantages.

Powerful chinese model which is suitable for river boats. This is due to the fact that the developed control system and high-quality screw allow you to change the position of the engine. Thanks to this, shallow water can be easily navigated. The only omission is exhaust system, which emits exhaust gases into the atmosphere. This increases the noise level.

Advantages:

• Increased torque.
• Convenient control system.
• Strong screw.

Flaws:

• Noisy.
• Small tank volume.

Advantages - High-quality assembly and unpretentiousness in handling.

Disadvantages - Too small tank.

Motor from a reliable Chinese concern HDX. Another Chinese equivalent expensive European engines. Most buyers note the simplicity and quality of the design. But, like the previous model, the gas tank is so small that it is better to take a canister with you.

Advantages:

• Low fuel consumption.
• Ease of maintenance.

Cons: Small gas tank.

The best outboard motors up to 10 hp. With.

The use of motors with a capacity of 10 or more liters. With. imposes obligations on the owner. Upon reaching this mark, an increased tax will be required for the engine. But the output is models whose performance does not reach the border.

The most reasonable price for the quality that is provided. high power, not reaching the threshold of 10 liters. with., allows you to easily accelerate the boat in a few seconds before top speed. The only problem is the difficulty of acquisition. There are few dealers of the brand in the Russian Federation, but the suspended model is worthwhile, and you can go to a neighboring city or region to get it.

Advantages:

• Profitability.
• High reliability.
• Durability.

Flaws:

• Expensive.
• Difficulty of acquisition.

By developing this model outboard motor, Chinese designers adhered to two goals. Create a powerful and economical engine. Protect buyers from having to pay taxes by subtracting 0.1 liters. With.

Advantages:

• Low fuel consumption.
• Good efficiency.
• Popular brand.

Cons - Expensive.

Advantages:

• High quality.
• Standard and simple design makes repairs easier.

Disadvantages - Requires separate configuration before use.

The best outboard motors from 15 to 20 hp. With.

Sometimes, in order to solve the problem, 10 liters is not enough. With. In such cases, you need to acquire serious powerful models capable of accelerating even large boats.

This is not the first time that a large 350 cc engine has become a leader among powerful engines. However, for famous brand and quality goods will have to seriously pay extra.

• High build quality and reliability.
• Balanced system.
• Excellent technical performance.

Cons - Expensive.

Slightly inferior to the leader motor. Works relatively powerful engines silently. This is achieved using a four-stroke piston system. Large torque allows you to quickly pick up speed from a standstill or give out good performance even with a loaded boat.

Advantages:

• Economical fuel consumption.
• Increased technical characteristics.

Flaws:

• The complex fuel injection and cooling system requires expensive repairs in the event of a breakdown.
• Starts only manually.

Good motor made in China, has an excellent value for money. He yields expensive analogues in power and economy, but suitable for RF use. Consumes standard 92nd gasoline.

Advantages:

• Cheap.
• Good quality.
• Quiet.

Disadvantages - The ignition system is the weak point of the model.

The best high power outboard motors

Well, you can not do without models used on large pleasure boats and speedboats.

A quality engine from the most titled manufacturer on the market and the bestseller. With a weight of 72 kilograms, it is compact and easy to install. Able to deliver maximum power from a standstill.

Advantages:

• Most reliable motor On the market.
• The distribution of the load on several cylinders allows easy starting from the starter.

Cons - Very expensive.

How to choose the best outboard motor

When choosing suitable motor the following factors must be taken into account:

• Required power. Depending on the size and purpose of the boat.
• Terms of Use. Salt or fresh water. Air exhaust or underwater.
• Budget. If there is a desire and spend a lot of money on a motor, the question is desire. If not, then you can choose Chinese engines.

You don't need to save too much. On the forums, users wrote many times about how they decided to buy a 5 hp motor. with., thinking it's a great idea for the budget. But after a while they realized that at such a pace, it was better to work with oars, since such an engine was of little use on a large boat. So they soon bought models with more power and the old ones had to be sold.

TOP 10 best manufacturers of Chinese outboard motors

The Chinese market is a place where anyone can, if desired, find a cheap analogue of an expensive product. Behind the low price is often poor quality. But there are also reliable manufacturers who value their reputation and customer base. It is from them that you can buy motors for boats, which are not much inferior to world analogues.

Nothing characterizes the company's products as much as a review of reviews from owners of equipment.

Sail

“I never had a love for Chinese goods, especially motors. Bought a SAIL T 9.9BMS last year. I liked that I did not have to go to GIMS to get a license. Works fine. Once I changed the belt, but this is more likely due to not respectable use. And so I praise. I'm happy that I didn't spend more money on a well-known brand" Alexey.

Troll

“In the city store, there was only TROLL T5 S in China. I decided to opt for it, since the price is 35 thousand rubles. seemed acceptable. I've been using it about once a week for 7 months now. There are no breakages or complaints. Starts up with half a beat. For weekly fishing with men, that's it. The dimensions make it easy to carry in the trunk of a Land Cruiser. 2-3 liters are enough for one half-day fishing trip” Oleg Stepanovich.

"Chinese JET marine The T5 BMS is painfully reminiscent of the old Yamaha. Strongly yells and hardly drags. I don't know if it's the boat, but the noise is loud. At first I thought I bought a marriage, because it seemed to be noisy, but did not move. It was necessary to set the carburetor correctly. After doing this, the boat slowly began to sail. Of the shortcomings, a small gas tank and insufficient speed. Several times I found myself without fuel in the middle of the Kuban River, I had to row, I had a good oar at hand ”Anonymous.

“I myself am new to boating, but I want to note that I have never regretted purchasing a motor from China. As a non-expert, many points were incomprehensible to me. But even being inexperienced, he was able to cope with SNT 3.5. Already three months of use, and everything goes like clockwork. ”Anonymous.

“Mixed feelings on the purchase. The fact is that I bought myself a new Chinese Sailor and after installation I realized that it did not work. It turned out that the problem is in the crooked shaft. Replaced it under warranty. I immediately noticed that the screw does not spin on the new unit. Having disassembled the lower part, I realized that the main elements of the motor, such as piston system and the carburetor going on Chinese factory, and the leg is in our homeland. This is how the seller, my friend, explained it to me. So our workers did everything just to do it. I decided to fix it on my own, I used to repair Yamaha. After that, I’ve been riding for half a year and haven’t seen any breakdowns” Vladislav.

“I bought a SEA PRO for 9.9 liters. with., seduced by the price. Finally received chinese engine, which refused to start even once. They didn’t change in the store, they offered to send it to independent expertise which will last six months. Spat and bought a more expensive model. I won't go for free anymore."

“We bought two 9.9-liter engines with a friend. With. The first time I started everything went like clockwork. A friend pulled the gas for half an hour, it turned out that it was necessary to apply correct technique, namely, hold on to the device itself during start-up. I don't know why, but here's a trick. After that, they swam several times, nothing broke, however, there was a lot of noise ”Anonymous.

“Dissatisfied with the purchase of the Chinese PLM Zongshen T5BMS, as it is very inconvenient to use. Starts easily, but the noise is certainly something. Plus overheating. I decided to always take an oar with me until I save up for another motor. ”Anonymous.

"Extremely satisfied Chinese motor so I decided to leave a review. In two years of operation, only once changed the candle. Traction is acceptable, control is standard. Recommended." Anonymous.

“I had several Yamahas before HDX 9.8. I thought I'd buy it for comparison, maybe I'll like it. Great engine. The only thing is displacement. Although it is stated that 9.8 liters. With. on it, pulls only 7-8. And so everything is fine. Convenient, poured into it even the 80th gasoline a couple of times. I sometimes take it for a ride to diversify the rest. I recommend, for such money the quality is good ”Anonymous.

Conclusion

Chinese engines are the most suitable analogue to expensive European or Japanese engines. At right approach to choose from, you can purchase a quality motor. But you need to take into account the specifics of Chinese products and, in case of the slightest malfunction, carry equipment to service repair or exchange.

In the field of manufacturing outboard motors, Chinese production facilities occupy a leading position. At the beginning of the article you will find a list of brands from our catalog that were released from Chinese conveyors.
Chinese boat motors are an inexpensive replacement Japanese manufacturers. For example, such as "Yamaha", from which 70% of the model range is copied from most of the Celestial brands. Chinese engineers and managers effectively optimize manufacturing process, which allows them to manufacture outboard motors with the same technical specifications that of more expensive Japanese and American brands. If we compare different models between brands, they are identical to each other in almost everything except color. That is, one japanese engine can be repeated in several lines at once different brands, changing only color scheme and exterior design.
In China, outboard motors are produced by 5 main factories. They create both copies of Japanese developments and original developments of European brands. Here are the factories:

1)PARSUN POWER MACHINE (SUZHOU) CO., LTD., The most worthy components and motors are produced at this factory. The well-known brands of outboard motors come out of its conveyors: HDX, Parsun, Golfstream

2)Zhejiang Pioneer Machinery & Electron Co., Ltd., Confidently combines price and quality in its products. The products of this factory are popular all over the world and are sold all over the globe. This plant produces outboard motors of such brands as Powertec, Aqua-jet, Sea-pro, Titan. In different parts of Russia, the names of brands of identical engines can differ for two reasons: the factory produces products of brands that copy more expensive original designs, and also because of the peculiarities of Chinese marketing.

5)Hangzhou Hidea Power Machinery Co., Ltd., manufactures outboard motors Hidea, Gladiator. This manufacturer is also looking towards new deals with local and foreign brands.

The price of a Chinese outboard motor

Every year, cheap Chinese outboard motors are gaining more and more popularity among hunters and fishermen from the CIS countries. This is not surprising, because the price for them is usually lower than for Japanese counterparts. This difference can reach up to 20-30% of the cost of the product. It is provided by optimizing production capacity and use in the manufacture of cheaper materials of identical quality to the original.

For example: motor from american brand Mercury, but it is produced in Japan at the Tohatsu factory model Mercury ME 9.9MH Light, aka NS Marine NM 9.8 BS, aka Tohatsu M 9.8 BS with an engine capacity of 169 cm3. average price by market in 2017 85000 rub. Its Chinese counterpart is Hidea HD 9.8FHS, HDX T9.8BMS, with an average bill of 63,000 rubles. That is, the Chinese counterpart costs about 27% less.

Or the most popular model from Yamaha, 9.9 GMHS with 2017 price 111000 rub. and analogues, for example: Hidea HD 9.9FHS, HDX T9.9BMS, SEA PRO OTH 9.9 the price for these motors is from 62000 rubles. up to 72,000 rubles, that is, 30-40% cheaper than the original.

High competition between Chinese brands copying original products, has a positive effect not only on the cost. Assembly accuracy is increased, finalized weak spots original designs, improved material characteristics, carefully thought out design. Consumers only benefit from this, as they get a sufficiently high quality for a lower price.

Buy Chinese outboard motor

The online store "Water Element" offers to buy Chinese outboard motors at favorable conditions. We can provide a discount from the price on the site, and for motors marked “Conditional price” and “We are trading”, you have the opportunity to offer your own version of their cost. The assortment is constantly updated, so you will always find something new in our store.
Our store presents outboard motors manufactured by five Chinese factories that manufacture water equipment for every taste, color and price. You will also find motors in the catalog Korean production. We also sell boats made for a specific the lineup motors. For example, Sea Pro propeller and jet devices are ideally suited to PVC inflatable boats of the same name.
If you find it difficult to choose, you can always contact our managers via chat or make a call to the store. We will help you choose the best motor option for favorable price and delivery to your home. By the way, in Moscow all catalog items are delivered free of charge, but for the regions you need to check prices. In some regions of Russia, you can arrange the delivery of the motor at no cost.

>>> <<<

To date, the motorcycle market has a huge selection of outboard motors. The main producing countries are Japan, America and China. And if earlier users tried to bypass Chinese technology and made a choice in favor of American and Japanese motors, now everything has changed.

Advantages of Chinese outboard motors

The main advantage of Chinese outboard motors is their low cost. Their prices are at least two times lower than for motors from other manufacturers. Thanks to this feature, Chinese outboard motors are popular all over the world.

Reliability is also an advantage of Chinese engines. Despite the prevailing stereotypes that Chinese technology is not of the best quality, China currently produces motors that can even compete with American manufacturers. In addition, do not forget that each motor produced undergoes international certification, so there is no doubt about the quality of these products.

Motor power

When choosing a boat motor, first of all, you need to decide on the power. The choice depends on the purpose for which the unit is purchased.

• 2-6 l. With. The "weakest" units, capable of reaching speeds of no more than 10 km / h. In addition, the speed is significantly reduced when moving against the current. Best suited for calm rivers and lakes.
• 7-15 l. With. More stable, two-cylinder engines. They weigh about 35 kg. By installing such a unit on a boat, you can reach speeds of up to 30 km / h. Such motors are suitable for reaching long distances.
• Motors over 15 HP With. This type of motors is not economical and it is not advisable to purchase them for such purposes as fishing. However, such motors are suitable for overcoming long distances, while they allow you to develop a fairly fast speed.

The best Chinese outboard motors

HDX (HONDEX)

Motors of this brand can be deservedly called the best of those produced in China. Representatives of this line meet all international quality standards.

If you need a high-quality and inexpensive outboard motor, we recommend that you pay attention to the HDX 2.5 BMS model. Features of this model:

• volume, 74.5 cm3;
• start - manual;
• fuel tank - 5 l;
• control type - tiller;
• ignition - TCI.

This unit is adapted to even the most “harsh” weather conditions, so there is no doubt about its reliability.

If you need a more powerful motor, the HDX F5 BMS model should meet all your expectations. This is a four-stroke, single-cylinder engine, weighing 24.5 kg. Additional motor features:

• working volume - 112 cubic meters. cm;
• control - tiller;
• start - manual;
• ignition - TCI;
• built-in tank capacity - 3 liters.

Parsun

This brand is actively gaining momentum and can already compete with the leaders in the outboard motor market. That is why the models of this manufacturer are popular in countries such as the USA and Canada.

Attention! To avoid confusion, it is worth noting that in Russia this manufacturer presents its products under the Golfstream brand.

If you're looking for a low-power, economical option, check out the two-stroke, single-cylinder Golfstream T2BMS. If you need a more powerful, four-stroke unit, then the F2,6BMS model is what you need.

Sailor

The manufacturer offers good products at a relatively low price. Of the low-power units, the most practical model is GM - T2.6. A distinctive feature of this motor is compactness, as well as low weight. The model is equipped with water cooling, this function allows the motor to work continuously for a long time, which makes you feel more comfortable while driving.

Of the higher power models, GM-T 4.0 can be distinguished. Here are some technical specifications of the unit:

• volume - 83 cubic meters. cm;
• ignition - CDI;
• engine type - single-cylinder, two-stroke;
• tank capacity - 5 l;
• cooling - water.

Advice. If you are looking for an economical option, then pay attention to these and other models of Sailor motors. The low price, in fact, does not mean poor quality, Sailor brand motors are proof of this.

jet marine

Another line that proved to the world that China began to produce really high-quality outboard motors. Of all the manufacturers listed, Jet Marine units have the most original and modern appearance.

Among users, the Jet T5BMS model is the most popular. Model power - 5 liters. s., number of cycles - 2, control - tiller, built-in tank - 2.8 l, working volume - 103 cu. s, number of cylinders - 1. This motor is adapted to any weather conditions. Jet Marine motors may well become a budget alternative to global brands such as YAMAHA, so we recommend that you do not pass by when choosing.

Choosing a boat motor is not the easiest thing, but this article provides the main selection criteria, as well as examples of the best units. We hope this will help you decide and purchase a suitable motor for your purposes, which will serve you for a long time and reliably.

Choosing a Chinese outboard motor - video