Tidying up the news. Tuning dashboard lights Lada Vesta

01.09.2019

Engine

The instrument panel of the Lada Vesta differs from previously installed options. After all lada manufacturers vesta sw cross constantly upgrade the car, its components and individual elements. Does the new development really deserve attention?

Dashboard Features

On dashboard Lada Vesta contains measuring and control components:

Fuel level sensor.
Tachometer.
Motor heating indicator.
Speedometer.

For their placement, a site was chosen directly above the steering wheel.

The main device is a speedometer (from 0 to 200 km / h). The Lada Vesta St. Cross does not accelerate to the maximum value. Engine type for speed mode does not affect. Directly on the speedometer are concentrated such indicators and sensors that signal certain processes:

The luggage compartment is not closed.
Open hood.
Open door designs.
Climate control system.
Turn sensors.
Speed limiters.
Emergency alarm.
Turn indicator.

Monitor on-board computer on the dashboard, the Lada Vesta is centered under the speed scale. The screen displays the following data:

The best choice tinting - frameless curtains. Best price 1500 per pair. ORDER ON INSTAGRAM

Dashboard Lada Vesta was developed from scratch and turned out to be easy to use, as well as attractive in terms of design. But at the end of 2016, an announcement appeared that AvtoVAZ had developed new panel Lada Vesta devices, where a number of qualitative changes have been implemented. It is assumed that drivers themselves will be able to tune the car by purchasing an updated version. dashboard.

The instrument cluster includes the following gauges:

speedometer
tachometer;
engine temperature gauge;
fuel gauge in the tank.

All this is placed in three "wells" above the steering wheel.

The central instrument is the speedometer. Its scale is marked up to 200 km / h, although Lada Vesta does not accelerate to this mark with any of the engines. Also on the speedometer are several indicators:

open trunk;
open hood;
alarm;
open doors;
Cruise control;
speed limiter
direction indicators.

Under the speed scale is a small on-board computer screen that displays the following information:

mileage (including mileage per trip);
current time and travel time;
average speed;
voltage in the on-board network;
fuel consumption;
operation of the checkpoint;
ambient air temperature;
cruise control operation.

In the left "well" is a tachometer with a scale from 1 to 7. "Red zone" means that the engine produces more than 5500 rpm. The indicators located here can signal the following:

pedal adjustment;
safety belt;
airbags;
brake failure;
accumulator battery;
engine malfunction;
emergency oil pressure;
transmission failure;
electric power steering.

On the right side, there are two scales at once: engine temperature (top) and fuel level (bottom). Here you can see alerts such as:

immobilizer;
fuel level;
lighting work.

On a note!
The instrument panel is made in modern style, everything is highlighted and there is no feeling of clutter. However, some car owners are dissatisfied with the convenience of reading information, especially at speed, so they tried to adjust the brightness of the instrument backlight on their own.

What has changed in the new Lada Vesta dashboard

It is known that the first update will receive cars for export, however, Russian market in 2017 should be replenished with such versions of Vesta.

In the front part, the changes affected the following:

increased font;
there was a daytime illumination of devices;
the backlight color of the scales changed to orange.

In theory, changing the backlight of the instruments will fix the problems with reading the readings. In the photo of the Lada Vesta dashboard, you can see that it has become much more presentable.

On a note!
The new instrument panel is illuminated at the proper level at night and during the day.

There are also some useful functionality improvements:

added voice guidance;
the volume of sound signals has increased;
the time is now automatically synchronized with the satellite (the driver only needs to set the time zone);
the indicators "Unfastened seat belts of passengers" and "Low tire pressure" appeared.

Whether the backlight brightness control will be implemented is still unknown.

How to remove the dashboard Lada Vesta

It is assumed that new version panels can be bought and installed on a torpedo. Its price will be approximately 8000 r.

The procedure for removing the dashboard involves the following steps:

Disconnect the negative battery terminal.
There are two screws on the top of the panel that hold it in place. They need to be unscrewed using the T20 nozzle.
Now you can remove the instrument panel by pulling it towards you to release the latches.
Use the T20 socket to loosen the instrument mounting screws that appear.
Now you can pull the panel towards you and disconnect it from the wires.

Installation is done in reverse order. The wiring diagram must not change.

Conclusion

The dashboard of Lada Vesta displays all the information you need while driving. The manufacturer took care of correcting all the shortcomings by releasing an updated version of the instrument cluster. Self tuning the dashboard should not cause difficulties even for beginners, the main thing is to understand how to disassemble the front panel.

Lada Vesta is a device that, in fact, is a link between the driver and the engine vehicle, as well as its main nodes. Since each driver interacts with the tidy in one way or another, he must understand the icons and indicators that are on it. You can find out more about Vestov dashboards, as well as their dismantling, below.

[ Hide ]

Designation of bulbs and sensors on the tidy

To begin with, let's get acquainted with the location and description of the components of the shield in Lada Vesta:

Tachometer. Thanks to this device, the driver knows what the frequency of the crankshaft is, that is, at what speed the engine is running. Do not allow the instrument pointer to move into the red zone, as this may cause damage to the power unit. If you press the gas pedal to the floor, while the speed exceeds 6200 per minute, the fuel supply will be limited. Also, experts recommend preventing the engine from running in a dangerous mode when the speed is less than 800 per minute.
Pedal adjustment indicator.
The seat belt icon is always on if the driver or passenger is not wearing a seat belt.
indicator. If it appeared for no reason, the problem may be the failure of the airbag sensor or its bad contact with power grid.
Backup bulb, can be connected when installed additional devices or systems.
Brake failure indicator, when it appears, stop the machine and check the brakes for proper operation.
unlocked door icon luggage compartment, when it appears, check the trunk.
Unlocked hood symbol. If it starts to burn on the tidy, while the hood is normally closed, you need to check the operation of the sensor.
Speedometer. This device is considered one of the main ones, since the driver pays attention to it more often than others. The device is used to demonstrate the speed of movement.
Hazard light icon, always flashes when the emergency light is activated.
Symbol of unlocked doors. If the vehicle starts moving with one or more open doors, the corresponding light will appear on the tidy.
Cruise control indicator.
Speed limiter indicator, appears if the driver exceeds allowable speed movement.
This device indicates the temperature of antifreeze in the cooling system. If the indicator is out of order, the vehicle is not allowed to operate, as it reports the temperature of the engine. In the event that this value exceeds the allowable value, which is 115 degrees, the light will glow red without interruption, and the buzzer should also work for a short time. At high temperature the engine may simply fail.
Staff badge anti-theft system- immobilizer.
Marker light switch icon.
Symbol for switching on low beam.
Diode icon for activating high beams.
The indicator for turning on the front PTFs always appears with their activation.
Similarly, the icon for turning on the fog lights installed at the back.
ESC light - electronic system sustainability management.
The ESC OFF symbol indicates that the system is disabled.
The fuel level sensor in the tank, the driver is guided by it when it is necessary to refuel the car.
Fuel reserve enable icon - Appears when there is little gasoline left in the tank.
LCD display with main parameters and options.
The right turn signal enable icon stops flashing after the maneuver is completed.
Left turn signal activation symbol.
The lamp for turning on the ABS system.
The battery icon may always appear when the ignition is turned on, but should disappear after starting the engine. If the indicator remains on, this indicates the need to charge the battery or diagnose the generator unit.
Alarm indicator light low pressure in tires, receives data from the corresponding sensors installed in the wheels.
Symbol of a malfunction in the gearbox.
Icon of malfunctions detected in the operation of the motor. There can be many reasons; when a symbol appears, a more detailed diagnosis is required.
Electric power steering controller.
Symbol of emergency low oil pressure in the internal combustion engine. It also always appears when the ignition is turned on and disappears after the engine is started (the author of the video is Yuri T *********** O).

Possible malfunctions

If the Lada Vesta dashboard began to work intermittently, this may indicate such malfunctions:

Poor connection between instrument and onboard network. Possible damage to the connection connector or contacts on it.
Failure of one or more sensors. For example, the speed sensor, crankshaft position, fuel level sensor broke down, as a result of which incorrect data is displayed on the dashboard.
Mechanical damage to the shield may be due to a strong impact or the operation of the tidy in conditions of constant vibration.
Electronic malfunction of the board, it is better to entrust the solution of such a malfunction to electricians.
The backlight is gone. Most likely, the reason lies in the burnt out light bulbs, which you just need to replace (the author of the video is the NlCKRUS channel).

Installation and repair instructions

How to remove the tidy with your own hands:

After disconnecting the battery, you need to unscrew the two bolts that fix the shield.
Then grasp the front of the tidy and gently pull it towards you. Pull until you hear the click of the latches.
Next, you need to unscrew two more screws with a screwdriver, they are located on the sides of the shield.
Pull the device towards you and disconnect the wiring plugs located on the reverse side. Dismantle the shield and repair or replace it.

Introductory Information

Content

Daily checks and troubleshooting
Vehicle operation in winter
A trip to the service station
Instructions for use and maintenance
Maintenance Consumables
Warnings and safety regulations when working on a vehicle
Basic tools measuring instruments and how to work with them
Mechanical part of the engine
Cooling system
Lubrication system
Supply system
Engine management system
Intake and exhaust system
Engine electrical equipment
Clutch
Transmission
Drive shafts
Suspension
Brake system
Steering
Body
Passive safety
Air conditioning system
Vehicle electrical equipment
Dictionary

Introduction

INTRODUCTION

First time concept front wheel drive sedan class "B", designed to replace the "Priora" in model line VAZ, shown at the Moscow international motor show in August 2014, and already in September 2015, a full-scale mass production model called Vesta. By the way, the new name for car Lada was developed with the participation of the BrandLab branding company, therefore, euphony and ease of remembering were taken into account. Vesta - female name, mentioned in the mythology of different peoples and associated with the hearth, comfort, spring and the renewal of nature. The factory designation of the model is VAZ-2180.

The car is built on the Lada В/С platform with a wheelbase of 2635 mm. The overall length of the sedan is 4410 mm, width - 1764 mm, height - 1497 mm. Renault-Nissan specialists took an active part in the development of Vesta, and Steve Mattin, who previously collaborated with Volvo and Mercedes-Benz. According to AvtoVAZ President Bo Andersson, the novelty is designed to restore pride in AvtoVAZ. Be that as it may, at the time of its appearance, Vesta really became the most modern Russian car.

The exterior of the sedan is distinguished by stylish head optics with LED running lights and X-shaped stampings on the sidewalls, which give the car a peculiar charm and recognition.

The interior corresponds to the general mood of the model. High-quality finishing materials and interesting design solutions create a cozy space in which both the driver and passengers are comfortable. Ergonomics at the proper level - all instruments and controls are exactly where you expect to find them. In the three wells of the instrument cluster with a visor hanging over them, there are a dial tachometer, speedometer, coolant temperature and fuel gauges, as well as a small on-board computer display. The latter can display standard set functions: total and daily mileage counters, instantaneous and average consumption fuel, mains voltage, average speed, outdoor air temperature, hint indicator for timely gear shifting, travel time, hours, remaining power reserve. On the steering wheel, for the first time for domestic models, switches appeared remote control audio system and cruise control.

Trunk volume is 480 liters. The trunk is characterized by a wide opening and a sufficiently low loading height, which makes it easier to load large luggage into it. Backrests can be folded if necessary rear seats to accommodate long loads. In the trunk subfield is a full-size spare wheel with a jack. The trunk lid can be unlocked in one of three ways: with a button in the car, with the ignition key, or by long pressing a button on the key fob.

Under the hood of Vesta, one of two sixteen-valve petrol engines can be installed. four-cylinder engines own design: 1.6-liter VAZ-21129 (106 hp power and 148 Nm of torque) or 1.8-liter VAZ-21179 (122 hp power or 170 Nm of torque). Third motor - Japanese-French gasoline unit HR16DE-H4M Renault-Nissan Alliance with a working volume of 1.6 liters and a power of 109 liters. s, developing a torque of 156 Nm. The choice of the buyer is offered two types of transmission: a five-speed manual or a five-band robotic.
Front wheel suspension - MacPherson struts, rear - semi-independent torsion beam. Steering - with electric power steering on the steering column. Front wheel brakes - disc, rear - drum type.
The car is offered in seven trim levels: Classic, Classic Start, Comfort, Comfort Image, Comfort Multimedia, Luxe, Luxe Multimedia. Already in basic equipment the list of equipment includes ABS, system exchange rate stability, electric power steering, Isofix mounts, traction control system, on-board computer, hill start assist, central locking with remote control, daytime running lights, immobilizer, alarm system, navigation, front electric windows, height and reach adjustable steering column. More expensive versions are additionally equipped with heating windshield and front seats multimedia system with a seven-inch touch screen, they have a rearview camera, speed limiter cruise control, light and rain sensors.
According to the results of the crash test conducted according to the ARCAP method, the model scored 14.1 points out of 16 possible, which corresponds to a 4-star rating. At the same time, Vesta turned out to be safer than cars such as Ford Focus and Flyundai Solaris. Since 2016, luxury models have been equipped with side airbags.
Lada Vesta - modern, comfortable and stylish car, capable of successfully competing in its class with foreign-made models.
This manual provides instructions for the operation and repair of all Lada modifications Vesta ("Lada Vesta"), produced since 2015.

Lada Vesta
1.6 l (VAZ-21129, 106 hp) Years of release: since 2015 Body type: sedan Engine size: 1596 cm3	Doors: 4 Drive: front	Fuel: gasoline AI-95 Consumption (city/highway): 10.1/6.0 l/100 km
1.6 L (HR16DE-H4M, 109 HP) Years of release: since 2015 Body type: sedan Engine size: 1598 cm3	Doors: 4 Gearbox: 5-speed manual or 5-speed robotic Drive: front	Fuel: gasoline AI-95 Capacity fuel tank: 55 l Consumption (city/highway): 9.5/5.5 l/100 km
1.8 l (VAZ-21176, 122 hp) Years of release: since 2015 Body type: sedan Engine size: 1774 cm3	Doors: 4 Gearbox: 5-speed manual or CVT Drive: front	Fuel: gasoline AI-95 Fuel tank capacity: 55 l Consumption (city/highway): 9.3/6.0 l/100 km

Specified consumption the fuel of a car in urban, mixed and extra-urban cycles is determined in laboratory conditions (using special measuring equipment) in accordance with the requirements of GOST R 41.101-99 (UNECE Regulation No. 101), serves to compare cars of different automakers and IS NOT AN OPERATING STANDARD!
The actual fuel consumption of the car may differ from that declared by the manufacturer due to the impact on the car of various objective and subjective factors: humidity, pressure and temperature of the surrounding air, terrain (ascents and descents), characteristics pavement, wind direction and speed, atmospheric precipitation, fractional composition of the fuel used, the selected gearbox gear, the duration of the cabin air conditioning system operation (both in driving mode and on Idling), the position of the windows (open/closed), the air pressure in the tires, as well as their dimensions, make and model, the mass of the transported cargo, including the driver and passengers, the presence of a towed trailer (for transporting goods, boats, snowmobiles, caravans and etc.), his gross weight And aerodynamic drag, driving style of the driver (frequency and intensity of longitudinal and lateral accelerations, average vehicle speed), the presence of an auto-start system in the car (including the engine and / or car interior heating system), running in a new car (for a complete set with the “Gear Shift Prompt” function on during the break-in period of the vehicle, it is recommended to ignore the requirements of the “Gear Shift Prompt”). It is also recommended to periodically (once a month / quarter) reset the readings of the car's on-board computer, since due to prolonged engine idling ( traffic jam, long engine warm-up time, etc.) and low vehicle mileage, there is a significant increase in the readings of the on-board computer, which calculates the average fuel consumption based on the hourly engine consumption and the distance traveled by the car (since the last reset of the on-board computer). The need for resetting the on-board computer and the frequency are determined by the person operating the vehicle.

Actions in emergency situations
Exploitation
Engine

Instructions for operation Lada Vesta since 2015 Controls, dashboard, interior equipment

2. Controls, dashboard, interior equipment

car keys

The car comes with two ignition switch keys, one with a remote control (1) with a retractable blade, the other without control buttons. The ignition switch key with remote control with a retractable blade combines the functions of:

Key for door locks and trunk lid;

ignition switch key;

Remote control;

Immobilizer working code key*.

The key without control buttons combines the following functions:

ATTENTION
- The immobilizer blocks the engine start and provides additional protection vehicle from unauthorized use. Remember that the immobilizer is only an additional barrier to an intruder and does not provide absolute and complete protection for your car from unauthorized use.

In the initial state, the tip of the folding key folds into a remote control. When folded, the remote control is convenient to carry in your pocket, bag, etc.

To start the engine, the key blade must be extended by pressing the button (1) for ejecting/folding the key blade.

To remotely unlock the doors while disarming the alarm, press the button.

To remotely lock the doors with the simultaneous activation of the security alarm, press the button

To open the trunk lid, press the button

Note
The key code number is printed on the tag (2).ATTENTION
The tag with the key code number must be kept at home in safe place. You will need the key code number if you need to make additional key or a duplicate key to replace the lost one.
To replace one key, you must provide a car with a set of all keys to a certified service station JSC "AvtoVAZ" to initialize the entire set.

Depending on the vehicle version, you can use up to four remote controls.

Production of new keys is made at the expense of the consumer.

The key must not be used in other cases (for opening bottles, etc.) than those indicated in the instruction manual.

Note
Do not bring the remote control near a source of heat, cold or moisture.ATTENTION
Even for a short time, do not leave the car in which there is a child (or animal) with the key in the ignition switch.
In this case, the child may endanger himself and others by starting the engine or turning on any equipment, such as power windows, or by locking the doors. There is a risk of serious injury.

ignition switch

START - starter. The position is unfixed. Automatic return of the key to the "ON" position. The key is not removed.

If the engine does not start on the first attempt to start, turn the key from the "ON" position to the "STOP" position and restart after about 40 seconds.

STOP - off. The position is fixed. The key is removed.

When the key is removed, the mechanism of the locking mechanical anti-theft device. To completely block the steering shaft, turn steering wheel right or left until it clicks.

To turn off the mechanical anti-theft device, insert the key into the ignition switch and turn the steering wheel slightly left and right to turn the key to the "ON" position.

ACC - auxiliary equipment is working (for example, the radio), the ignition is off, the engine is not running. The position is fixed. The key is not removed.

ON - ignition. The position is fixed. The key is not removed.

ATTENTION
Do not hold the key in the "START" position for more than 10 seconds.
The ignition switch contains a starter override mechanism that prevents the key from being turned back from the "ON" (Ignition) position to the "START" position.
To re-turn the key from the "ON" ("Ignition") to the "START" position ("Starter"), you must first turn the key to the "STOP" ("Off") position, and then try again.
1. It is strictly forbidden to turn off the ignition and remove the key from the ignition switch while driving, this leads to a sharp increase in the force of pressing the brake pedal and blocking the steering.
2. Do not leave the key in the "ON" position when idle engine. Doing so may drain the battery.

Key forgotten in ignition switch alarm

If the ignition is off and the key is in the ignition switch, the buzzer sounds when the driver's door is opened to warn the driver that the key has been left in the ignition switch.

If the ignition is turned off and the key is removed from the ignition switch, but the parking lights remain on, then when opening driver's door the buzzer emits an audible signal, warning the driver about the left switched on parking lights.

Remote control system

The remote control system is designed for:

Remote locking / unlocking of door locks with simultaneous switching on / off of the vehicle security mode;

Opening the trunk lid;

Turn off the alarm.

Operation of the remote control system

Locking door locks and arming from the remote control

To lock the door locks and turn on the armed mode, press the lock button on the remote control. In this case, the door locks will be blocked and the armed mode will be activated, which is confirmed by a double light signal of the direction indicators.

If one of the doors or the hood and trunk was opened during arming, the doors will be locked and then unlocked, and the armed mode will not be activated. Close all doors, press the lock button on the remote control (see the algorithm described above).

After arming, the system controls the following zones:

Side doors;

trunk lid;

Ignition switch.

Unlocking door locks and disarming from the remote control

To unlock the door locks and turn off the security mode, press the unlock button on the remote control. In this case, the door locks will be unlocked and the security mode will be turned off at the same time, which is confirmed by a single light signal of the direction indicators.

If the doors are unlocked using the remote control button and any door/trunk opening/hood opening/ignition on has not been opened within 2 minutes, then the armed mode (auto-return) will be activated if the alarm system was in armed mode before unlocking. The inclusion of the security mode is accompanied by a double light signal of the direction indicators.

If any of the above events occur during the auto-return delay, the auto-return mode is terminated.

Opening the trunk lid with remote control

Opening the trunk lid with the remote control is possible only when the ignition is off. To open the trunk lid, press and hold the button on the remote control for a while.

When the security mode is on, the opening of the trunk lid occurs simultaneously with the disarming of the security mode.

After closing the trunk lid, to enable the armed mode, you must press the lock button on the remote control.

Remote alarm shutdown

If in the security mode any door is opened / the hood is opened / the trunk lid is opened / the ignition is turned on with a “foreign” key, then an alarm sounds.

The alarm mode is turned off by pressing the unlock button on the remote control. At the same time, the security mode is turned off and the side doors are unlocked.

Central and automatic locking / unlocking of door locks from inside and outside the car

Central locking / unlocking of door locks is intended for:

Locking / unlocking the locks of the side doors from the passenger compartment with a button on the instrument panel;

Unlocking the locks of the side doors when manually opening the front door;

Automatic locking/unlocking of the locks of the side doors according to the vehicle speed;

Automatic unlocking of the locks of the side doors in case of an accident.

1. Central locking / unlocking of door locks from the passenger compartment

To lock the locks of all doors from the passenger compartment, press the button on the instrument panel, the indicator on the button will light up for a while, then go out. If the hood, trunk or one of the doors were opened when the button was pressed, the doors will be unlocked again. Close the doors, hood, trunk, press the lock button, all doors will be locked.

To unlock the locks of all doors from the passenger compartment, press the button on the instrument panel again.

For forced blocking doors, in the case of any open door, you need to press and hold the button for a while.

2. Unlocking the locks of the side doors when manually opening the front door

Opening any front door automatically unlocks all side doors.

3. Automatic locking / unlocking of side doors according to vehicle speed

When the ignition is on and the vehicle is moving at a speed of more than 10 km/h, all side doors are automatically locked, unless the driver's door was previously locked. When the ignition is turned off, automatic unlock locks of all side doors, if the lock was made automatically according to the speed of the vehicle, and the driver's door lock was not unlocked.

4. Automatic unlocking of the locks of the side doors in case of an accident

In the event of an accident, in the event of airbag deployment, the locks of all side doors are automatically unlocked.

Note
The central blocking has protection of door locks against an overheat. If the locking and unlocking of the door locks occurs repeatedly within a short period of time, the system stops responding to pressing a button on the instrument panel, as well as to pressing buttons and on the remote control. If this happens, do not press the button on the instrument panel and the buttons and on the remote control for a while, after which the system will fully recover.

Keys forgotten in the ignition lock

If the ignition is off and the key is in the ignition switch, the buzzer will sound continuously when the driver's door is opened to warn the driver that the key has been left in the ignition switch.

If the ignition is turned off and the key is removed from the ignition switch, but the exterior lighting remains on, then when the driver's door is opened, the buzzer emits two intermittent beeps, warning the driver that the exterior lighting has been left on.

Remote control range

The range depends on the surrounding conditions and can be up to several meters. Therefore, in order to avoid unintentional unlocking or locking of the doors due to accidental pressing of the buttons, handle the remote control with care!

Remote control malfunction

Make sure the battery of the specified model is not dead and is properly installed. Battery life is about two years.

How to replace the battery is described in Chapter 1 emergency situations».

Electronic engine start blocking system (immobilizer)

Used on cars electronic immobilizer, which provides them with additional protection against unauthorized use by prohibiting the engine from starting.

Your vehicle is equipped with two ignition switch keys (see Keys section above).

Locking and unlocking the doors manually

Unlock the doors with the key inserted in the door lock.

Front doors: Grasp the handle, clasping the top, and pull it towards you.

ATTENTION
Before opening the door lock with the key, remove the protective cover.

Manual opening from the inside

front doors

Pull the door handle (1).

rear doors

From the passenger compartment, also pull the door handle (2). If you left the external lighting and turn off the ignition, when the driver's door is opened, an audible signal will sound to warn of a possible low battery, etc.

Locking the door without a key

To lock the rear door without a key, lower the flag (3) located under the lock mechanism down and slam the door. When the child lock on the door/doors is simultaneously engaged and disconnected (discharged) battery unlocking the rear door/doors from the outside and inside impossible! The battery will need to be connected to unlock the door/doors.

Child safety

To make it impossible to open the rear side doors of the car from the inside, press the lever (1) on each door, close the doors and from the inside check that they are securely locked.

ATTENTION
If you decide to drive with the doors locked, remember that this may make it difficult for rescuers to access the cabin from the outside in an emergency.
Even for a short time, do not leave a car with a child, disabled adult or animal in it with the key in the ignition. They can harm themselves or others by starting the engine, operating equipment such as power windows, or locking doors.
In addition, it must be taken into account that in warm and / or sunny weather, the temperature in the car interior rises very quickly. There is a risk of serious injury or death.

Driver door switch blocks

Switch keys are used to lower and raise the windows of the front and rear (optional) doors. electric drives power windows on door trims. To raise the glass you want, pull the end of the corresponding power window switch up: on the passenger door upholstery or in the switch block. To lower the window you want, press the end of the corresponding power window switch down. After you stop pressing the key, it will automatically be set to the middle position, and the glass will stop in any position you choose.

To control the mirrors, you need to turn on the ignition and move the mirror select switch slider to the side corresponding to the mirror you want to control.

The corresponding symbol will then be highlighted. yellow light. this means that the selected mirror can be controlled. You need to control the position of the mirror using the joystick (1). It is necessary to achieve the required position of the mirror by alternately pressing one of the marks.

Power window control features

The power window controls have 3 positions:

1. “Glass up” (non-fixed end position).

2. "Off" (fixed middle position).

3. "Lowering the glass" (non-fixed end position).

To lower the window requires pressing, and to raise the window, raising the button.

To disable power window control from the switches located in rear doors(in the variant), press the button (7) in the switch block, the symbol in the button will be highlighted in red. To resume the possibility of controlling the power windows from the switches located in the rear doors, press the button (7) in the switch block again. The red illumination of the symbol in the button will go out.

Rotate the handle (1) to lower or raise the glass to the desired height. Do not lean anything against the half-open window: risk of damage to the power window.

outdoor light switch

Steering column switch for outdoor lighting:

I. neutral position. The dipped headlights are on if the headlights are turned on with the exterior lighting switch;

II. left turn indicators are on. Unfixed position;

III. left turn indicators are on. Fixed position;

IV. right turn indicators are on. Unfixed position;

V. right turn indicators are on. Fixed position;

VI. on yourself, submission light signal. Momentary switching on of the main beam of the headlights, regardless of the position of the outdoor lighting switch. Unfixed position;

VII. on my own, included high beam headlights if the headlight switch is on. Fixed position.

To turn on the outdoor lighting, turn the ring (1) for controlling the outdoor lighting, which has fixed positions:

- "Turned off". The position is fixed.

- "Parking lights on". The position is fixed.

- "Dipped headlights on" The position is fixed.

- "Auto" mode is on. The position is fixed (in a variant).

Turn the control ring (2) to turn on the fog lights fog lights, which has fixed positions:

- “Included rear fog lights". Switching on is possible only when the parking lights or low beam headlights are on. The position is fixed.

New firmware from daylight Lada Vesta devices are installed at the LADA dealership. It is activated simultaneously with the inclusion of DRL.

many owners Russian sedan note the high-quality study of the interior, including the dashboard, which looks very impressive. However, there are some difficulties with it.

Problem

Car owners noticed that during the day the Lada Vesta dashboard is devoid of backlighting. On cloudy days, this has almost no effect on ride comfort and safety, but on sunny days, especially in winter, when light is reflected from the snow, reading the readings from the instruments becomes extremely difficult.

No backlight on clear days is inconvenient

Solution

Due to numerous requests to resolve the issue with the lack of instrument illumination in Lada Vesta, which were sent to AvtoVAZ, Russian factory made a new firmware. After that, already in the last days of June, all necessary materials to update the firmware of the Lada Vesta dashboard.

And since the first days of July, dealerships have acquired a new firmware. This software marked with the index 35, while the previous version, which is installed on many sedans, is indicated with the index 26. Software 35 is focused on turning on the backlight of Vesta's instruments when the daytime running lights are turned on.

The video demonstrates the backlight at software 35

The firmware changes quite quickly - usually no more than a quarter of an hour. In addition, according to Ladnaya Mekhanika, this service is paid and costs about 600 rubles.

Driving is much more comfortable with lighting.

Get firmware number

If you are faced with the problem of the lack of illumination of the Lada Vesta dashboard during the day, first you need to find out the current firmware number. This can be done in one of 2 ways:

Display the current software directly on the on-board computer display. To do this, during the testing process, you must press the up button on the right steering column paddle.
Dismantle the entire shield and look at the label that is glued on the back. It also shows the software version.

The video clearly demonstrates the first method. To do this, you do not have to unwind and remove anything.

As you can see, the issue of the lack of illumination of the Lada Vesta tidy is solved quite simply. However, for those who live far from dealer center, it's easier to wait for the next MOT and replace the firmware on it.

The number 026 at the bottom indicates the firmware version