Lifan x 50 how to remove the rear seat. Removing the rear seat Lifan Solano

08.04.2021

When you choose a car for yourself, the issue of utilitarian use is usually not that much of a concern. The owner of a passenger car does not often have to transport oversized cargo, and is increasingly perceived not as an urgent need, but as just a nice bonus. Shopping bags or vacation suitcases don't take up much space. There are, of course, people for whom this is a critical moment; they either buy non-passenger cars, or choose cars only for this parameter. Such car owners are actually a minority. The rhythm of city life does not imply such tasks for the average driver. But what if you still need to transport, say, a refrigerator?

The rear seats can be folded down to carry bulky items.

Thoughtful design

In a passenger car, the manufacturer assumes in such a situation the transformation of the interior. The rear seats can be folded down to increase boot space. As a rule, they are laid out in a 60/40 ratio (in some models the ratio is different, but this is rather an exception) and form a work surface combined with the trunk space.

In such a space, you can easily load the overall cargo. Due to the extended loading area, a refrigerator, a wardrobe, and massive boxes will now fit into the car. You just need to understand that, although the rear seats are upholstered on the side of the trunk with another material that is more resistant to mechanical stress, this is still a material, not a hard surface. The corners and protruding parts of the overall cargo can be torn, then the seats will have to be tightened. Therefore, many drivers protect the upholstery by laying a blanket or just a large rag.

The technology is simple. There is a lever on the top of the seat. Before unfolding the rear seats, by pressing it, fold their lower part towards the back of the driver's seat. It leans back behind a loop sewn closer to the middle of the section at the junction of the upper and lower parts, or on the side of the seat. With it upright, press the lever and lower the top of the rear seat. Sometimes (in some car models) you also need to pull the seat belt to the side to do this.

The upper and lower parts of the rear seat, when unfolded, should support each other, creating a stiffener. This is necessary so that a heavy load, if it falls on the unfolded seatback, does not push through it. Unfold the second part of the seat in the same way. We deliberately do not say "second half" because the ratio, as mentioned above, is usually not 50/50, but 60/40, that is, one part is larger than the other. Why is this done?

note

There are a few simple guidelines for transporting oversized cargo in the unfolded rear seat. Most of them are dictated by ordinary common sense. For example, if the load you are transporting is unevenly heavy, then try to place the heaviest part of it. The impromptu stiffener, which we wrote about above, of course, helps, but it does not guarantee 100% safety of the seats. If the load is heavy at any point, try to position it so that the load falls more on the surface of the trunk floor. If possible, the load should be secured. To do this, you can use, for example, belts or bedspreads. Well, or prop it up with another load, smaller.

Manufacturers often promise a "flat floor" with the seats unfolded. Some, of course, keep the promise. But for many, the floor will not be absolutely even. Therefore, again, if possible, unstable cargo (buckets with liquid, boxes with bulk mixtures, etc.) should be placed so that it does not have. In general, as we said, these rules are determined only by common sense and are intuitively understandable.

At the end of the trip

Before you fold the rear seats, you need to check that they have not been damaged during transport. Folding, by the way, is done in the reverse order: push the upper part into place until it clicks, adjust the belt, then lower the lower one. If the upholstery was not damaged, the seat was not pressed through and the weight did not stretch the springs and loosen the fasteners, then your trip is successfully completed.

To date, Lifan Solano is known among drivers as a fairly reliable and high-quality car. Of course, like any other car, it has its own minor flaws, which, as a rule, are easily eliminated by motorists themselves.

There are times when it is necessary to remove the rear seats, for example, to install new speakers, put on or change covers, or just temporarily dismantle them to transport large loads in the car. This work will not take much effort and time, however, you need to know the sequence of actions so as not to damage the brackets or other parts of the back of the Lifan.

Removing the rear seat Lifan Solano

In order to remove the rear seat on the Solano, you need quite a bit of free time, a suitable place of work and a standard set of tools. So, to accomplish this task, the following actions are performed:

Headrests. First, both head restraints are removed in turn - right and left. To do this, carefully, so as not to damage the skin, first pull out one, then the second head restraint from the locking sockets with a sharp upward movement. Remove them from the cabin so as not to interfere with further work.
Pillow. Now you can start removing the pillow. Since it is not screwed with anything, but is held exclusively by fixing clips, you just need to slightly raise it, just a couple of centimeters, for two protrusions that are located at the bottom of the pillow itself (closer to the center of each of the seats), and pull it out by pulling it towards you . In this case, work should be done carefully, do not pull anything, because the lower frame is deformable (bends), even with minor loads. The pillow is removed from the car.
backs. Now you should do the dismantling of the left and right backs. To do this, you need to: remove the covers, if any, slightly tilt the backs forward and down, unscrew the four bolts (with a 10 wrench) located at the base. After that, nothing will hold them, and they are easily removed from the car.
Side backs. They are fixed with fixing bolts from below. They just need to be unscrewed.
Sheds. Now it is possible to unscrew the mounting bolts holding the right, center and left seat canopies and remove them to the side.
Armrest. To remove the armrest, you need to remove its cover with a small screwdriver, and, having unscrewed the bolt, remove it from its original position.

Assembly is done in exactly the reverse order.

Note: before driving, make sure that all parts and the rear seat cushion are securely fixed and do not wobble.

Removing the rear shelf on Lifan Solano

If necessary, you can remove the rear shelf of the car. For such manipulations, carefully remove the rear pillar trim without damaging it, then disconnect and remove the additional rear brake light. Since the back of the car has already been removed, and access to the working surface is absolutely free, the shelf is simply detached by releasing it from the mounting clips. Installing the shelf on the Lifan Solano is done in the reverse order, before installing the rear seat.

Lada Priora is one of the latest innovations in the domestic auto industry. The car already had its fans and critics. To protect their pets, Priora owners say that the car copes with the transportation of bulky goods perfectly. You just need to know how to remove the rear seats.

You will need

- wrench for 10;
- Phillips screwdriver.

Instruction

1. Open the back door of the car. Feel for the small cushion lock handle under the seat. Press the handle, controlling the applied force. It will be quite difficult to find a replacement for a broken one.

2. Gently lift the edge of the cushion to pull it out. Go around the car on the other side and do the same operation so that both ends of the pillow come out of the grooves.

3. Raise and pull the seat cushions out of the passenger compartment. The left rear seat cushion of Priora is slightly larger than the right one - because of this, it comes out a little more difficult.

4. Now take care of the head restraints. Move them to the lowest position, after which, with sufficient force, pull up to the stop. After that, press the latch to pull the headrests out of the rear seatback.

5. Locate the lock strap on the seatback. Pull it up. In a car with high mileage, and occasionally even in a new one, the latch mechanism may jam. If this snag remains after several attempts to remove the rear seats, it will be necessary to lubricate the mechanism with lithol. In addition, it happens that it is unthinkable to find a strap due to the fact that the interior seats have been reupholstered. At the same time, the latch strap remained inside, behind the cover in the rear seat.

6. Pull up slightly to extend the rear seat backrest. That's right, just pull out the second one. Loosen the armrest screw attached to the hinge. Later, remove the hinge screw bolted to the body. Loosen the loop and look closely at the pillow retainer. If it is defective, disconnect it as well, in order to replace it with a new one later.

Drivers who from time to time carry bulky cargo in their cars often try to increase the interior space by removing both the second and first row seats &mdash. Occasionally, the dismantling of the seat is performed for other reasons. In any case, it will be useful for every motorist to know how to remove the seats on their own, if such a need arises.

Tools in order to dismantle the seats, you will need the most primitive - a knob, a socket wrench and 2 screwdrivers - a Phillips and a slotted one. You will spend no more than 15-20 minutes of your personal time dismantling one seat.

To remove the first row seats, you need to open the cover (the easiest way to do this is with a flat screwdriver, prying the cover from above). Under the cover you will see a bolt, the one that needs to be unscrewed and removed. Each seat is fastened with four such bolts, therefore, by doing this operation four times, you will disconnect the seat from the base and be able to remove it.

In some vehicles, the second row seats are somewhat more difficult to remove than the first row seats. But they can also be dismantled without special difficulties. First you need to unscrew the screws that hold the decorative plastic lining, and remove the decor. Later, the back of the lining must be folded back, slightly moved to the left, and then, in one movement, move forward and remove.

Perform all movements carefully and carefully so as not to damage the plastic parts of the seats. Having performed this primitive operation several times in a row, in the future you will be able to perform it mechanically. When removing decorative parts, help yourself with a flat screwdriver, in no case applying exorbitant efforts. After removing the overlays, unscrew the seat latches and remove them.

Instruction

1. To remove the rear springs on classic VAZ models, before starting work, install the car on a viewing hole or overpass with excellent lighting. Stop the car with a handbrake and wheel chocks. The ignition must be off.

2. Using a 10 wrench, unscrew the nut that secures the pressure regulator rod to the rear axle. In this case, support the bolt with a suitable key. Disconnect the lower end of the pressure regulator rod. Using the same wrench, unscrew the brake pipe tee. If the car has high mileage, lubricate this connection with a penetrating lubricant. Remove the tee.

3. Disconnect the rear shock absorber from the mounting bracket. Hang the rear wheel. Remove the rear spring together with its plastic gasket. Remove the upper spring rubber pad from the base cup. Inspect all gaskets and replace with new ones if damaged.

4. To remove the springs on front-wheel drive VAZ vehicles, also place the car on an inspection hole and fix it. Remove a back of a back seat and take away an upholstery of a niche of a back wheel. Using a 17 wrench, unscrew the nut located on top of the niche. At the same time, hold the shock absorber rod with a key of 6.

5. Remove the nut, support and spring washers and top pad. With the support of 2 keys for 19, unscrew the nut securing the shock absorber to the beam. Remove the shock absorber bolt, using a drift if necessary.

6. Take out the shock-absorber with a spring. Remove the spring, lower cushion and compression buffer from the shock absorber. Often the spring gasket "sticks" to the body. If there are deformations and breaks on it, replace it with a new one.

7. To remove the spring on the "Kalina" and "Prior" hang out its back. Remove rear wheels. Lower the rear until the springs begin to compress. Remove or tilt the rear seatbacks. Having locked the rear shock absorber rods, unscrew the two nuts securing them to the body.

8. Remove spring washers, pad top washers, and top rubber pads. Hang the rear again so that the springs are released. Disconnect the shock absorber from the suspension arms and remove the shock absorber assembly. Remove the spring, gasket, bushing, washer, bottom pad, shroud, and compression buffer from the shock absorber.

Instruction

1. In order to remove the inner lining of the ceiling, remove all interior parts that are in one way or the other in contact with the roof. Pay attention to the order of parsing parts. Prepare a place in advance, where after that neatly fold the fasteners and the parts themselves.

2. Start with a ceiling light. It is better not to drop the flask of the ceiling, because it is made of a hefty fragile material. All ceiling lights must be unscrewed without fail. After that, proceed to dismantle the sun visors and handles in the car. They also need to be removed with care.

3. Pay attention to the soiling of the ceiling material. Before you start the process of dismantling the inside of the ceiling of the Lada Priora car, stock up on two liters of water and detergent.

4. Prepare a number of ceiling fasteners in advance. There is a high probability that when pulling out the roof upholstery material, many fastening clips will be broken or fail. Even slight damage to the clips leads to their complete destruction.

5. Lower the door seals slightly down. Pay attention to the condition of the plastic skins of the middle stubborn bodies. The fact is that the wear resistance of these skins, as well as many other parts of the car's interior, is extremely weak. Consequently, it is necessary to carefully remove the material of the roof upholstery from under the side skins.

6. Please note that the material from which the inner part of the roof is made is not recommended to be folded or rolled up. But, as practice shows, this is indispensable if there is a need to pull it out of the cabin. However, if you plan to replace the upholstery of the car, then you can not worry about it.

7. Open the front driver's door if you are working with a Lada Priora sedan. Carefully, slowly and very smoothly pull the ceiling material towards you. Do the same, but only by opening the back door, if the ceiling is dismantled in the hatchback model version.

Read also

jprosto.ru

How to remove the rear seat Lifan Solano

To date, Lifan Solano is known among drivers as a fairly reliable and high-quality car. Of course, like any other car, this type of transport has its minor drawbacks, but they, as a rule, are easily eliminated by the motorists themselves.

There are times when you need to remove the rear seat

There are times when you need to remove the rear seat - in order to install new speakers, put on or change covers, or simply temporarily dismantle the seat to transport large loads in the car. This work will not take much effort and time, but you need to know the sequence of actions so as not to damage the brackets or other parts of the rear of the car.

Removing the rear seat Lifan Solano

In order to remove the rear seat of this car, you need quite a bit of free time, a suitable place of work and a standard set of tools. So, to accomplish this task, the following actions are performed:

Head restraints. First, both head restraints are removed in turn - right and left. To do this, carefully, so as not to damage the skin, first pull out one, then the second head restraint from the locking sockets with a sharp upward movement. Remove them from the cabin so as not to interfere with further work.
Rear seat cushion. After that, you can proceed to remove the rear seat cushion. Since it is not screwed with anything, but is held exclusively by fixing clips, you just need to raise it a little - just a couple of centimeters, for two protrusions that are located at the bottom of the pillow itself (closer to the center of each of the seats), and pull it out by pulling it towards you . In this case, work should be done carefully, do not pull anything, because the lower frame is deformable - it bends, even with minor loads. The pillow is removed from the car.
Seat backs. Now you should do the dismantling of the left back of the rear seat. To do this, you need to: remove the cover, if any, tilt the back slightly forward and down, unscrew the two bolts (with a 10 key) located on both sides at the base of the back. After that, nothing will hold her and she can easily get out of the car. The same must be done with the right back of the rear seat of this car.
Side backs of the rear seat. After all that has been done, you can begin to remove the left side backrest of the rear seat of the car. It is fixed with fixing bolts from below - you just need to unscrew them and remove the backrest to the side. The same manipulations are carried out with the right side backrest of the rear seat of the car.
Seat canopies. Now it is possible to unscrew the mounting bolts holding the right, center and left seat canopies and remove them to the side.
Armrest. To remove the armrest, you need to remove its cover with a small screwdriver, and, having unscrewed the bolt, remove it from its original position.

The seat is assembled in exactly the reverse order. Note: before driving, make sure that all parts and the rear seat cushion are securely fixed and do not wobble.

Removing the rear shelf

If necessary, you can remove the rear shelf of the car.

For such manipulations, carefully remove the rear pillar trim without damaging it, then disconnect and remove the additional rear brake light. Since the back of the rear seat of the car has already been removed, and access to the working surface is absolutely free, the shelf is simply detached by releasing it from the mounting clips. The shelf is installed in the reverse order - before installing the rear seat.

lifanovod.ru

How to remove rear seat toyota camry

To remove the rear seats on a Toyota Camry, you will need the following tool:

slotted screwdriver;
ratchet wrench for 12

Removing the rear seat sofa

1. Pull up on the edges of the sofa cushion, snapping it out of the hooks on both sides

2. Disconnect the two connectors using a slotted screwdriver

1. Raise the head restraint, exposing the plugs of the rear seat backs.

2. Remove the plugs with a slotted screwdriver and unscrew the fastening bolts with a 12 wrench

3. Pull the belt out of the guide

4. Unscrew the backrest mounting bolts on both sides in the lower part (key 12)

5. Unscrew the bolts securing the backrest to the bracket (key 12)

6. Detach the rear seatback curtain from the rear shelf

7. Remove the back

The result of the work done should be like this:

Tags: remove rear seats toyota camry

razobrat-auto.ru

How to remove the back seat

How to remove the rear seat on a Mazda 3: instructions

There comes a time when you have to remove your car seats. This is done for various reasons. For example, you decide to carry out high-quality soundproofing of your vehicle. This is usually done in order to improve the sound quality inside the cabin. Yes, and in general, soundproofing allows you to get rid of unnecessary sounds.

Imagine that you are eating, listening to music, and nothing bothers you on the road, no extraneous external noise. But it happens that the removal of the seats is carried out for their further high-quality cleaning or replacement of covers.

It doesn’t matter what your reason is, but let’s just say that you can do everything yourself, without resorting to the help of specialists. There is nothing complicated in this, the main thing is the desire and the necessary tools. So, let's go, now we will tell you step by step how to remove the back seat in Mazda 3. From the tools you only need wrenches.

Mazda cars are very popular among the inhabitants of our country, and throughout the world. The quality of Japanese cars remains on top, thanks to many parameters: strong and reliable suspension, rigid body, comfortable interior and many others.

Thanks to all this, for many years of existence, Mazda 3 cars have earned good popularity. The rear seats in their variety in the Mazda 3 are divided into two types: sedan and hatchback. Now we will tell you in detail how to remove them without much difficulty.

We remove the rear seat with our own hands - the procedure

1. Inspect the rear seats along the edges, there should be rubber plugs that must be carefully removed around the entire perimeter. They cover the nuts that secure the seat to the floor. After removing the plugs, put them in a separate bag so as not to lose. Remove any nuts you find.

2. After everything is ready, you need to lift the top of the cushion and move the entire seat forward. By doing this, the pillow will disengage from the latches that are still holding it. In principle, after you have done all this, the pillow can be removed from the passenger compartment.

3. Next, you need to get to the seat mounts from the back. This can be done from the luggage compartment, but for convenience, you need to remove the bracket on which the spare wheel is attached. The entire front upholstery in the trunk is also removed. That's it, you have access to the rear backrest mounts. Now it remains only to unscrew the bolts.

4. Now you need to be as careful as possible. Examine your trunk and you will find two nuts there. The back of the seat is fixed with these nuts. Do you understand what to do with them?

5. Next, you need to apply a little physical force: you need to press the back of the seat so that its mounting bolts are completely out of the holes. Lift the back up so you can take it out. You will see the brackets that will walk along the bracket, just pull them out. The backrest can be taken out of the cabin.

6. Let's move on to the armrests. Everything is simple with them, they are set at an angle of 45 degrees, 4 bolts are unscrewed and the armrests are taken out.

7. Practically the same is done with the headrests, which are obtained in a similar way. They are fixed by 2 screws that are unscrewed.

With all these actions, the main thing is not to miss anything and keep all the details in separate packages, in separate parts. The fact is that usually with the removal of the seats, after some time they are installed. It is carried out in the reverse order in the same sequence.

According to our algorithm of actions, you can make sure that you should not even resort to the help of specialists. Better to do it yourself and save money. Moreover, there is nothing complicated in this process.

If you do not plan to install the seats in the near future, then it is better to wrap them in some kind of film in order to save and bring them into the room. If they are damp, then you need to dry them in every possible way to avoid mold and fungus, which can subsequently destroy them.

If you are just changing them to a new interior, then it is better to immediately put the new rear seats in their regular places. Trust me, it won't take long. Everything can be done in one day.

It is better to vacuum and clean under the seats right away, as a lot of dirt collects there during the operation of your car. Although the Mazda 3 is considered a rather complex machine, the issue of seats is easily solved.

If there are heated seats on your way, then do not worry, there is nothing difficult about it. You just need to unplug the wires at the bottom. They snap and snap there, so you can handle it.

Read: Removing the front seats on a Mazda car.

The seats, in turn, are also completely disassembled. This is done for various reasons, someone wants to clean, someone change the upholstery. But more on that in another article.

How to unfold and remove the rear seat on a Renault Duster: photo, video

Many modern crossovers have the function of folding rear seats. Renault Duster has not bypassed this technology either. This function expands the rear space of the car for carrying cargo, and is also very useful for outdoor recreation.

How to fold the rear seats on a Duster

The seats are laid out quite simply and any motorist can cope with this task. Let's see how it's done:

There is nothing difficult in the process itself, and folding the backs of the rear seats on the Duster is quite simple even for a woman.

Backrest transformation options

Left passenger backrest lowered

Left passenger backrest lowered near

Right large passenger backrest lowered

What are folding rear seats for?

There are many reasons why the Renault Duster has comfortable folding seats. Let's consider the main ones:

These are the positives of folding seats, but there is also one negative:

When transporting goods with folding rear seats, the number of seats in the car is reduced. That is, only the front ones remain: the driver and front passenger.

Removing seats on Renault Duster

There are times when motorists need to dismantle the back seat in the car. Its dismantling is not difficult, since special knowledge and skills are not needed. Renault Duster was no exception in this case. Removing the rear seat on it is quite simple with a minimal set of tools.

Reasons for dismantling the seat

There are several reasons why the need to dismantle the rear seat comes. Let's consider for what exactly:

Material damage. This happens quite rarely. This is mainly the fault of passengers who smoke or children who accidentally damaged the fabric or leather surface.
Cleaning the seat and back. Passengers in the back row, on long trips, eat on the go or just have a snack, while an accidental drop of ketchup or other substance may remain on the surface of the material and can only be removed if the seat is dismantled.
Many drivers like to haul liquids and building materials in the back seat. But, there are cases when they crumble or spill, which leads to clogging of the material. Also, they penetrate deep into the structure of the surface and can no longer be removed by simple methods, and the dismantling of the seats is necessary.
This pasting noise vibration isolation. In order to silence the car, you have to remove all the elements, including the rear sofa.
The last reason why you need to remove the rear seat is for repairs due to an accident. Often this happens if the car was hit hard in the rear and the side members were deformed. Also, in case of side impacts to the rear doors, it may be necessary to remove the rear seat.

Seat removal process

The video shows the process of removing the seats:

The process of removing the seats on the Renault Duster is quite simple, since the design is not complicated. Consider step by step how the dismantling takes place:

Thus, the rear seats are being dismantled. If it didn’t work out, then unscrew all the mounting bolts from the trunk and only then proceed to dismantle the seat. Removing the seat is carried out using two keys - 16 and 17. There is nothing complicated in the described process and you can do it yourself. If it is not clear how the operations are carried out, you should watch the video, where everything is shown quite clearly and clearly.

conclusions

The function of folding rear seats on the Renault Duster is a very useful feature, not only for work, but also for leisure. With the backrest unfolded, the volume of the luggage compartment will be three times larger, and the length will be almost 70 cm, respectively.

How to remove the rear seat Renault Logan: photo and video

A very popular model of the French car industry, Renault Logan, rightfully occupies a leading position in the Russian market. Despite its budget class, the car is very reliable and practical in operation. Logan makes such versatility decent ground clearance and sufficient trunk capacity. But what if you need to transfer bulky cargo by car? After all, the rear seats on this car do not fold!

On the video there is a moment how to remove the rear seat and raise the back!

Removing the rear seats

Removing the rear seat on a Renault Logan is quite simple, you just need to have a wrench, a screwdriver and a pair of hands of a reliable friend nearby, since the back of the seat is quite weighty.

First of all, we take everything out of the car that will only interfere with further work, such elements include rubber mats and a rear shelf.

If the seat belts are faulty and prevent you from fulfilling your plan, simply remove them from the mounts. To do this, dismantle the pad from its buckle and unscrew the bolt fixing it. And then, using a flat screwdriver, disconnect the screw securing the lining located in the center of the body.

We take out the belt bracket, for this it is necessary to pull the lining. During such work, you will feel serious resistance from the latches, but do not worry, they are designed to maintain integrity even in an accident. So breaking them will be quite problematic.
After the bracket itself, we remove the “tongue” of the seat belt itself.
We remove the bottom bracket, lining and pull out the inertial coil assembly.

After that, when the rear back is completely free, and nothing interferes with it, with the help of an assistant we pull it out of the passenger compartment.

Note!

Before loading additional weight into the car, refer to the operating instructions for your Logan for help. Since for cars with different engine sizes, the load capacity will be different.

Also, pay special attention to maintaining the integrity of all small parts and latches. If at least one of them breaks during assembly, you will get one uncomfortable rear sofa, which will only “walk” easily when traveling on it.

Some of the owners of Logans have long been accustomed to transporting bulky goods using the above method, but in addition to all of the above, they share their tips:

If you need to transport loads frequently, just leave the backrest bolts unfastened. Without them, the removal process is reduced significantly, and without them the back will not go anywhere. However, the bolts should be kept in a safe place just in case.

Dismantling the rear shelf and seat on the Nissan Almera classic instruction with photo

If you suddenly need to remove the rear shelf to replace the acoustics, this instruction on how to remove the rear shelf and rear seat in a Nissan Almere Classic will come in handy. Everything is done quite simply and quickly, the main thing is to familiarize yourself with this instruction with a photo and you should not have any problems.

The photo shows explanations for all the steps to remove the rear sofa on the Nissan Almera Classic and remove the rear shelf. So study and shoot when you need it, for example for transporting long items, if you don't have a hatch in the rear sofa cover or it's too small for your purposes.

So let's start dismantling the rear shelf and rear seat:

1) Unscrew the Isofix child seat mount with a 12 key

2) Remove the brake light. We push it towards the glass and up a little

3) We take out 3 pistons from the shelf. To get it, you need to press in its middle and then pull it out

4) Now proceed to the removal of the rear sofa. We pull the eyes on the right and left and lift the pillow up.

5) Now remove the back of the rear seat. To do this, unscrew the 2 bolts on the right and left. After that, pull the back up, it rests on the brackets. For those who have the maximum equipment and have a hatch for skis, in my opinion, you will need to unscrew a couple more bolts, be careful.

6) Remove the caps that are hidden behind the back of the seat

7) Remove the side panels of the racks

8) Remove the shelf, pull it gently towards you

9) Here is access to the rear speakers, if you were looking for them))

10) We collect everything in the reverse order and do not forget about the seat belts.

How to remove the rear seat on a Volkswagen Jetta and install heating

If the car owner is constantly looking for new ideas that will improve his car, then it will be an expected desire to equip the rear passenger seats with heating, which works when it is winter outside. However, there is one significant problem in that not everyone knows how to remove and disassemble the rear seat on a Volkswagen Jetta. If this problem is solved, then the rest will take a minimum of time.

In order to remove the rear passenger seats on a Volkswagen Jetta, you must perform the following steps:

unlock the existing rail locks in the mounts that are designed for VW Jetta child restraints;
then it is necessary to remove the front part from the rear passenger seat, for this it should be pulled up, thereby removing it from a pair of fasteners;
the rest needs to be slightly shifted back by pressing on it;
the rear part should also be pulled up a little, thereby removing the passenger seats from the VW Jetta.

Now it's the turn to remove the backrest from the rear passenger seat of the Volkswagen Jetta. To dismantle it, you will need:

it is necessary to open access to the middle support of the backs, for this you need to bend back the floor covering where it is located;
if there is an overlay on the support, then it must be removed;
then you need to unscrew the screws and remove the clamp from the support;
lifting the right side of the backrest, it should be removed from the middle support and from the finger;
then you will need to unscrew another fixing bolt and then freely remove the seat belt buckle from the floor.
now it remains only to remove the right backrest from the VW Jetta, before that, simply raising the left backrest, removing it from the middle support and from the finger.

back seat

Removing side supports

Now it's up to the removal of the side supports on the passenger seat. However, everything is not so simple here, because, depending on the configuration of the VW Jetta, they can be with or without AirBag installed. If there are no airbags, then to remove them you will need:

unscrew the nut, and then fold the seat back forward;
remove the protective cover and slightly unscrew the screw;
the side support should be carefully pulled up, thereby freeing it from the fasteners that held it;
if the VW Jetta has airbags, when removing the supports, you must carefully disconnect the wire connectors to prevent the AirBag from deploying.

Such a small instruction will help you disassemble the rear seat in a matter of minutes, since there is no guarantee that if the heated rear seats on a Volkswagen Jetta car do not work, you will not have to fix the problem yourself.

Lateral support with AirBag

Lateral support without AirBag

How to install heated seats yourself

Now a small overview of how to install rear seat heating on a VW Jetta yourself. It is very comfortable and pleasant for passengers if the seat heating works. This will not require much, since any auto shop can purchase an installation kit, but the time spent on re-equipping a VW Jetta will more than pay off with the resulting comfort.

So what we have available:

Of course, the ideal option would be for the heating to be in the armrests, however, some difficulties may arise here, so you should not complicate your work. However, even with what we have, we get not only a car of a prestigious “premium” class, but also a very comfortable vehicle for both the driver and passengers.

www.autoblaze.ru

How to remove rear seat

Sometimes there are situations in which the car owner has to think about removing the rear seat from his car. The reason for this may be their cleaning, replacement or repair. If you find yourself in this situation - do not immediately contact a specialist, this work can be done independently.

To carry out work on dismantling the rear seat, you will need:

screwdriver;
a set of keys;
a set of star bits for removing decorative panels.

For maximum access to the vehicle interior, open the rear doors as wide as possible. First you need to remove the bottom cushion. Carefully examine the place where the sofa touches the car body - there, behind two decorative panels, there are places for its attachment. Using a special nozzle, unscrew the screws that fix these pads and remove them. Take a wrench and twist the nuts you have access to. They press the steel mounting bracket of the lower cushion to the body, thereby fixing it securely. Remove the bracket from the pin and gently lift the front of the seat while pulling it towards you. Through the gap formed between the lower cushion and the seatback, carefully disconnect the electrical wiring responsible for seat heating. Pull the sofa even more and, after completely releasing it, carefully remove it through the doorway.

The next step is to remove the back. To reduce its dimensions and increase free space, you should start by dismantling the headrests. While holding the plastic bracket, push them down as far as possible, then, with a little effort, gently pull the top. This will deactivate the locking mechanism and the head restraint supports will gradually slide out of their attachment points.

Inspect the top end of the seat back and find the button or lever that is responsible for fixing it. Click on it. You should not make much effort, as a rule, this part is made of thin plastic and excessive load can damage it. In some cars, such a lever may be located in the trunk, in which case it will be painted red and equipped with a direction indicator.

By folding the backrest, you will have access to the bolts that secure it to the car body. As a rule, there are two of them and they are located on the sides. But in some cars, additional fixing bolts may be located in the center of the backrest. Unscrew them all with a wrench. If your car is equipped with a rear seat back heating system, disconnect the wires going to the heating element. After that, carefully remove the backrest from the car.

Now you know how to remove the back seat from the car. This is not that difficult to do, but by doing this work yourself, you will not only save your time that you would have to spend on a trip to the master, but also save a little.

How to remove seats?

Often, motorists have to face all sorts of problems to increase the usable volume to load bulky luggage. Since it is impossible to stretch or expand the machine, it is necessary to get out of this situation differently. Or, more precisely, remove unnecessary elements of the auto interior - remove the seats, both rear and front.

Seat types

If everything is clear with how to remove the front seat, then there are two main types of rear seats used in cars with a sedan and hatchback body type. In this case, you do not need to think about how to remove the upholstery of the seats or whether you need to completely disassemble the luggage compartment. If necessary, it is quite possible to remove the rear seats on your own, without resorting to the services of automotive specialists or car repair shops.

How to remove the seats

Of the tools, for this procedure, you only need wrenches and a little patience. Everything else - follow the instructions.

Before removing the rear seat, you must first remove the rubberized plugs located on the rear or front seat cushion mounting posts. They are located at the point of joining the floor of the body with the seats and cover the fixing nuts. It is required to carefully unscrew them from the seats and put them in a separate place to prevent confusing them with other disassembly elements.
Next, you need to raise the upper edge of the seat cushion in such a way as to free up space for further dismantling. Slightly move the seat forward, disconnect the fastening clips that allow you to hold the back of the pillow. And completely remove the seat cushion from the car.
The next step to success will be cleaning the spare wheel bracket located in the luggage compartment of the car. It is worth carefully bending and removing the mounting plates that connect the floor to the front of the luggage compartment mat. To gain access to the rear seat back mountings, the luggage compartment front upholstery must be carefully removed.
Next, you need to carefully inspect the trunk and find two nuts in it. Each of the nuts, respectively, secures the right or left side of the seat backs. Remove the nuts and set them aside.
Tilt the rear seat back so that the mounting bolts come out of their respective threaded holes. Next, you need to pull the interior ceiling and remove the back of the rear seat, releasing the brackets from the brackets. Pull the seatback out of the car body.
Rotate the seat armrests to form a 45 degree angle. Unscrew the fixing bolts and dismantle the armrests outside the passenger compartment without sharp jerks.
Loosen the fixing screws securing the seat back head restraint. Remove the headrest.
The rear seats are installed in the reverse order. It should be remembered that all fasteners, even if they are exactly the same, must be installed in the places where they originally stood. This will ensure proper installation and the absence of "extra" spare parts.
To remove the driver's seat, it is necessary to unscrew the fixing bolts that fix the rear part of the outer seat trim. To do this, unscrew the bolt securing the seat belt. Move the front seat cushion to the steering wheel until it stops and unscrew the bolts that fix the sled to the surface of the car floor.
Move the front seat back as far as it will go and unscrew the screws securing the front parts of the slide. Remove the seat belt pretensioner connector. If necessary, remove the electric motors so that they do not interfere with you.

The history of automotive improvement has not changed fundamentally in the area of seat attachment. This manual is suitable for almost any brand of car. The main criterion, when mounting and dismantling the front and rear seats, is accuracy, cleanliness when working with seat trim and a clear arrangement of fasteners in their places.

How to remove the rear seats on the VAZ 2110, including removing the backs from the video

Car seats not only provide a comfortable ride, but are also responsible for the safety of the driver and passengers. When there is a breakdown in the design of the rear seats of the VAZ 2110 or the need to clean them, it is not necessary to spend money on a trip to a car service to remove them. You can do it yourself.

Over the years of operation of the car, all interior elements wear out. The seats have fabric upholstery, so they need to be periodically cleaned from dust and dirt. It is best to do it after their dismantling, in which case the cleaning will be really high-quality and efficient.

Removing the rear seats may also be required for repairs in the following situations:

after an accident;
in case of breakage of the mechanism for lowering the back;
in case of malfunction of the armrests;
for tightening the fastening mechanisms.

Before starting work, we prepare the necessary tools. To remove the seats we need:

flat and Phillips screwdrivers;
key for 10;
pliers;
repair kit (according to the situation).

It is better to work with gloves so as not to inadvertently injure your hand on sharp metal corners.

The procedure is as follows:

Video: How the rear seats are removed on the VAZ 2110

Can the backs be removed separately?

This is easy to do, you also need to pull the loop behind the headrest, and then unfasten the upholstery and remove the backrest from the lower mounts. Many car enthusiasts complain that the locks are made of low-quality materials, and after several removals, the latches no longer hold the parts properly. Therefore, if there is no urgent need, it is recommended to remove the backs together with the bottom cushion. This will increase the life of the seats.

In the VAZ 2110 model, seat mounts are made quite simply. To dismantle these structures, tools are required that every motorist can find.

How to remove the back seat on a Nexia

You may need to remove the rear seat if you are soundproofing the floor (you will also need to remove the front seats)

	First, remove the plastic pads on the hinges of the seat, carefully so as not to damage these pads. To remove the lining, you need to press the stopper of the lining retainer with a small nail and push it forward (the stopper is a round plastic rod that is inserted into the hole of the lining, pushes the retainer whisk apart and securely holds the lining). The stopper will fall down onto the mat Use pliers to remove the lock washer from the hinge axis, then knock out the hinge axis Move the front seats forward to the stop, straighten their backs. We climb into the rear passenger seat, rest our backs on the back of the front seat, and with our hands on the lower hard part of the rear seat, and push the seat away from us. The seat fastening bar will come out from under the bracket. So one half of the seat is released, the second half is similar from the other rear passenger seat Taking the seat out of the car If there is no need to remove the seat, but simply fold it back (for example, to put on covers), then it is not necessary to remove the hinges. The seat leans forward beautifully, turning on the loops already described above

	We unscrew the two bolts with a 21 head (they also fasten the reverse seat belt buckles)

	Now you need to grab the lower edge of the seat, and lift it vertically upwards, while periodically pressing with the other hand in the area of the upper mounts (four circles in the photo in the upper part of the seat)
	Everything, the seat is completely removed, we put covers on it
	We assemble the seat in the reverse order

Tags: remove the back seat on the Nexia, put covers on the Nexia

To add a comment you need to sign in or register

www.nexia-faq.ru

autofluids.ru

How to remove rear seat Mazda 3

The Mazda 3 brand car enjoys the love of Russian car owners. Cool aerodynamic collations, tuned suspension, rough bodywork and a comfortable interior with comfortable seats make this car an enduring celebrity. There are two main types of rear seats used in the Mazda 3 - "sedan" and "hatchback". If necessary, it is absolutely permissible to remove the rear seats on your own, without resorting to the services of car service experts.

You will need

- spanners.

Instruction

1. Remove the rubber plugs located on the rear seat cushion mounting posts. They are located at the point of joining the floor of the car with the rear seat and cover the fastening nuts. Carefully unscrew the fastening nuts.

2. Raise the top edge of the rear seat cushion. Slightly move the seat forward, disengaging the latches holding the back of the cushion. Remove the seat cushion from inside the Mazda 3.

3. Remove the spare wheel bracket located in the luggage compartment of the vehicle. Gently peel back and remove the retaining plates that secure the front of the luggage compartment mat to the floor. In order to gain access to the rear seat back mountings, remove the front luggage compartment upholstery.

4. Observantly inspect the luggage compartment and find two nuts. The whole nut fixes one of the seat backs. Loosen the nuts.

5. Press the backrest of the rear seat so that the fixing bolts come out of the holes. Pull the backrest up and remove it by removing the brackets from the brackets. Remove the seat back from inside the Mazda 3.

6. Rotate the seat armrests 45 degrees. Unscrew the four fixing bolts and dismantle the armrests.

7. Remove the two fixing screws securing the head restraint to the seat back. Remove the head restraint.

8. Installing the Mazda 3 rear seat is done in reverse order.

9. To remove the front seat of the Mazda 3 car, you need to unscrew the fastening bolts that fix the rear part of the outer seat trim. Unscrew the seat belt mounting bolt. Slide the front seat cushion forward until it stops and unscrew the bolts that secure the slide to the floor of the car.

10. Slide the seat back as far as it will go and remove the screws securing the front of the slide. Disconnect the seat belt pretensioner connector. If necessary, remove the motors.

Quite often, drivers encounter such a situation when an airbag is triggered, and there is not enough knowledge to mount it in place. Consequently, in order to put the aesthetics of the car interior in order, there is one way out - to remove the pillow on your own. Just do not forget that it can save someone's life.

You will need

car tool kit

Instruction

1. If you still decide to remove the airbag, then there are several recommendations about this. First you need to understand the mechanism of the system. It consists of the airbag module itself, an impact detection sensor and a diagnostic unit. The driver's airbag module is located in the steering wheel, and the passenger's airbag is located in the instrument panel. Sensors are located in the front of the car from the outside, or in the cabin. The diagnostic unit has an LED lamp that lights up in the event of a security system malfunction. If this lamp lights up, contact an authorized service center for your car brand.

2. In order to remove the airbag, you should perform the following actions: Unscrew the airbag together with the torpedo from the spacer support beam with the support of the TORX key. Remove the glove compartment and unscrew the guard with a Phillips screwdriver. Before you are a few bolts, unscrew them and pry the plug from above, disconnect the wiring. Take out the entire structure.

3. Your next step will be to replace the pillow block, or just the plugs. But not everything is so primitive. By replacing the airbag, you do not get rid of the task, since the information about its operation remains in the system's memory, and only an expert can erase it. In the opposite case, the pillow will be in a non-working condition, and the lamp of the diagnostic unit will be on.

4. Together with the airbag, the seat belt system is also triggered, after which it comes into malfunction. Consequently, it also requires replacement. So removing the airbag is not difficult, but you should not forget about safety, you may need tea even in the most unforeseen cases.

Occasionally, owners of a Masda car have situations when they need to remove the glove compartment, however, not all drivers know how to do this, because the glove compartment is attached with several screws that are not immediately noticeable. Below is a step-by-step guide on how to remove the glove compartment. If you want to remove the glove compartment on your Mazda, follow a few primitive sequential steps.

Instruction

1. Find the space between the right door of your car and the panel. It will only be available if you open the door, it is desirable in its entirety. Now carefully remove the plate (you will hear a classic click). If you can't pry the plate off by hand, use a flathead screwdriver. Once you remove it, you will see 2 screws that need to be unscrewed.

2. Later, after you have completed all the above operations, open the glove box itself. In it you will see screws, unscrew them. All these actions are elementary, you should not have tasks when performing them.

3. It turns out that you have done several successive steps, unscrewed 4 screws. Now the panel with the glove box is a little free, and you have a chance to get your hand deep into it. This design is each mounted on one latch. Gently snap it off with a little physical effort. After that, pull out the glove box lid. To do this, pull it a little to the right, and then down.

4. Now the removal of the glove box is the last, but the most difficult step. Loosen the hard to reach screw. If you look straight ahead, you will not see it, because the head of the screw is pointing down, and the screw itself is not visible at first glance. To unscrew this screw, first crawl under the panel itself and look at it from the bottom up. Now that you have seen this screw, unscrew it. It turns out that the glove compartment palace is snapped off, all the screws are removed, and you have a chance to remove the glove compartment.

Note! If you decide to remove the glove compartment independently, be neat. Do not damage the thread into which the screws are driven. Unscrew the screws slowly, do not turn them. Carefully remove the plate without damaging it.

Useful advice Do not start unscrewing the glove compartment when the battery is on. This is scary because the airbag can mechanically deploy in the car.

This article will tell you how to independently replace the rear pillars on a Lifan Solano car. In our case, the car will be equipped with new stands KYB EUROPE Shock absorber 1 pcs 341322 U H 27 Made in Czech.

It is better to replace the struts in the inspection hole, since it will be more convenient to unscrew the nut at the bottom of the shock absorber from the hole.
And so, we unscrew this fastening nut:

Then open the trunk and pull out one clip:

We bend the casing (it easily bends there, you don’t need to pull out all the clips) and see:

We need to unscrew 2 nuts of the same size, the one that is smaller does not need to be unscrewed:

Now, let's jack the wheel, only the jack needs to be installed under the wheel suspension NOT UNDER THE BODY and raise the wheel, then put a stump under the body, BUT do not lower the jack, then remove the wheel and unscrew 1 more bolt:

We lower the jack, the body will have to remain in place, but the suspension will gradually sink to the bottom, then we remove the jack and knock the shock absorber from the bottom with a small hammer:

Removing the damper:

Then, we tighten the spring, but it is not necessary to tighten it to the limit, but only so that from the bottom, where the stop is, there is a gap, well, or until the moment when the spring does not spin:

We unscrew the nut from the shock absorber and remove everything from it:

We take a new shock absorber and pump it:
(we take the shock absorber and set it “Correctly”, that is, as it will stand on the car and press the stem all the way (for the first time and the second, dips and different sounds are allowed) then the stem should itself without obstacles (do not need something on it put on when pumping and he should not rest against anything) and get out without help (if he slowly comes out, do not pull him back). We do this operation 3-5 times.)

Attention! Pumping should be done only in a vertical position (as it will stand on the machine).

Attention! After pumping, the shock absorber must not be laid horizontally and during assembly it must not be strongly tilted to a horizontal position.

Now, what was on the old shock absorber, we put on a new one:

In principle, everything is ready, now we install the new shock absorber in the reverse order: we tighten the shock absorber nut, put the shock absorber, screw the bolt on top and the nut from the bottom, jack the suspension, put the wheel, lower it to the floor, climb into the trunk and tighten 2 nuts, then tighten it well bottom nut.

Similarly, we replace the second rack.

Based on materials: http://www.lifansolano-club.ru