The second generation Ford Focus is one of the most common budget cars in Russia. Despite the fact that the second generation has not been produced for a long time, these models are still often found on city streets. The car has proven itself on the good side. This is a reliable and economical car for every day. But so that its operation does not become a burden, it is necessary to carry out regular maintenance. One of these operations is an oil change at the Ford Focus 2. But replacement is only half the battle. In order for the engine to last for a long time, you need to know which oil is suitable for a particular power unit. Well, let's figure out which oil is best for the 2nd generation Ford Focus.
What is poured from the factory?
On the conveyor "Focus" came with semi-synthetic oil, which corresponded to the Ford approval WSS-M2С913-A. As for the brand, it was a Formula F product with a viscosity of 5w30.
This oil had a whole range of additives that are so necessary when running in a new power unit. But time does not stand still, and now the second "Focuses" are no longer produced. So what oil for Ford Focus 2 (1.8) will be the best? There are plenty of options.
Motorcraft Full Synthetic (USA)
Note to owners of diesel Focuses: Motorcraft Full Synthetic is suitable only for gasoline engines.
Castrol
This is already a European brand. All French cars drive on this oil, and it is not contraindicated for Focus either. Judging by the reviews, Castrol products are of high quality and detergent properties. This is especially noticeable on engines with mileage over 200 thousand. The product perfectly washes away all the dirt and accumulated deposits. Among the shortcomings, reviews note a higher cost. The price of the product is 5.5 thousand for five liters. American "Motorcraft" is 30 percent cheaper. Also, Motorcraft makes fewer fakes.
But the counterfeit "Castrol" in the domestic market is more than enough - motorists say. When buying, you need to carefully look at the inscriptions and do not buy canisters with incorrect fonts and crooked measuring lines. What kind of oil for Ford Focus 2nd generation to pour? If we consider the Castrol line, then experts recommend using the Edge line with a viscosity of 5w40. This is pure synthetic, but there are also semi-synthetics. This is Castrol Magnatec 5w30. As practice shows, it is no worse than the previous one - it also washes away dirt and does not thicken in winter.
Other options
Are there any analogues? There are a lot of them, but most use the following products:
- Motul 913s. This is a semi-synthetic product with a viscosity of 5w30. One of the cheapest on the list. The cost of a five-liter canister is 2.5 thousand rubles.
- Shell. One of its advantages is that the oil is suitable for any season. With him, the car feels great both in winter and in summer.
- JB German Oil LL Special. This is synthetic oil. Sold in 4 liter cans. The cost is from 2.5 to 3 thousand rubles. There are options for both petrol and diesel engines.
How much to pour?
Along with the choice of brand, motorists are wondering the amount of lubricant. Since different engines were installed on the Focus, the volume of the product being poured will be different. Let's start with the smallest motors. These are 16-valve units 1.4 with gasoline injection. For them, it is recommended to use 3.75 liters of oil. The same figure for 1.6-liter diesel engines. But gasoline 1.6-liter Duratek units need more oil. Replacement will require 4.1 liters of product. The 1.8 engine is designed for 4.25 liters. For two-liter gasoline-powered engines, it is recommended to use 4.3 liters of oil. But in a 2.0 turbodiesel engine, it is worth pouring 5.5 liters already.
What to do if there is no way to measure the volume?
If oil is poured directly from the barrel, you can determine the rate by the dipstick.
Experts say that the level should be average or higher than that. But it is worth remembering that a lot of oil is just as harmful to the engine as its absence. You have to follow certain rules.
About transmission
Along with the engine, do not forget about the transmission. This is an equally important unit after the internal combustion engine. The Ford Focus of the second generation was equipped with both mechanical and automatic transmissions. Let's start with the first. At the manual transmission, the Ford Focus 2 oil change should be done every 75-90 thousand kilometers. No more than 2.2 liters of oil are poured into the box (although the total volume indicated by the manufacturer is 2.8 liters). As for viscosity, the 75w90 product is usually chosen. Manufacturers may vary. The most popular is "Mobile Mobilub 1". Despite the high viscosity, this product performed well in the northern regions. Owners in the reviews do not complain about the operation of the transmission - it does not need additional heating. The cost of the product is 800 rubles per liter, which is quite acceptable. Motorists also use Castrol. However, it costs more - from 1.2 thousand rubles per liter. These two brands are identical in quality, so there is no point in overpaying for a brand.
What other oil can be poured into the Ford Focus 2 box? For those who want to save more, without sacrificing quality, experts advise considering Eneos Gear 75w90. However, reviews say that the product is afraid of frost. It should only be used in temperate climates, otherwise the box may be damaged. The boundary operating threshold for Enios Gear is minus 20 degrees. What people love this oil for is its price. One liter costs 375 rubles.
Changing the oil in the automatic transmission on the Ford Focus 2
An automatic transmission has a completely different principle of operation, so the oil here differs in both viscosity and technical characteristics. Instead, ATP fluid is used here. It can be recognized by its characteristic red color. Which product should you choose? Experts advise using the original Mercon V oil. How many liters will be needed? It all depends on the replacement method:
- With a partial oil change method in the Ford Focus 2 automatic transmission, it will take about five liters of fluid. Usually this method is used by those who service the car with their own hands.
- If hardware is used (that is, a complete replacement), you must have at least ten liters.
The cost of the procedure, taking into account work and materials, is 12 thousand rubles. During hardware replacement, specialists dismantle the pallet, clean the filters and the magnet, as well as lubricate the fittings. The pallet is installed back on the sealant (the old one is previously removed with a knife).
Upon completion of the operation, a jump in idle speed is possible. But after two or three minutes everything stabilizes - this is normal. In terms of time, hardware replacement takes no more than half an hour. And with a partial replacement, you can suffer for about three hours. Plus, after a thousand kilometers, you will again have to break the pan and drain the oil. With a hardware replacement, the next service will be required only after 60 thousand kilometers. It is this figure that is the regulation for replacing ATP fluid in the Focus automatic transmission.
So, we found out which oil to choose for Ford Focus 2 in the engine and gearbox.
Engine oil for Ford Focus 2
Using the right lubricants can extend the life of your engine and save you thousands of dollars in repairs. However, many motorists don't know what kind of oil they need for their car. After reading a post about the best motor oil of 2016, I decided to write about oil for Ford Focus 2.
What oil to pour Ford Focus 2
It is impossible to find a single answer. Now there are so many oils that even sellers are lost in their assortment. The most important criterion for choosing an oil should be 100% synthetic, and the point here is not that this option is poured at the factory, but in its optimal viscosity and the necessary additives. I will not write about the advantages of synthetics now, but will immediately move on to answering the question of the best oil for Ford Focus 2.
Oil for Ford Focus 2
1. Mobil 1 Advanced Fuel Economy
This oil is specially formulated for those who want to improve the fuel economy of a gasoline engine. It has an unusually low viscosity and a unique combination of additives that give this synthetic oil superior performance over other brands. You will feel special pleasure at low temperatures, and super low viscosity increases engine efficiency and improves fuel efficiency. Real people have reported potential benefits of 0.2 to 2.3% fuel savings after switching to this oil, and its excellent thermal and oxidation stability helps reduce oil aging.
Nice bonus for people who forget to change it.
Available in 0W-20 or 0W-30.
2. Castrol GTX Magnatec
This oil has been around for quite some time and has special molecules that protect the engine during startup. It will be a good choice for those who drive a lot or use the start/stop function.
Available in 0W-20, 5W-20, 5W-30, 10W-30.
3. Valvoline Full Synthetic with MaxLife Technologies
This oil is specially formulated for engines over 150,000 km and has a special additive that helps prevent oil burns. It has added antioxidants and a mixture that improves washout and prevents precipitation.
Valvoline Full Synthetic with MaxLife Technologies has an additional "ash-free" anti-wear additive that helps prevent premature engine wear, so it is highly recommended to use this oil just after 150,000 miles. km.
Available in 0W-20, 5W-20, 5W-30 and 10W-30.
4. Pennzoil Platinum
With this synthetic oil, you can take part in the manufacturer's warranty program. This program covers 15 engine units, lasts 15 years or 800,000 km. If you use this oil and have all the receipts and records from the service station, then you are covered by Pennzoil insurance.
This product is designed to keep engine pistons up to 65% cleaner than accepted standards. Customer reviews say that thanks to this synthetic monster, they have driven 1000 km more than usual.
Available in 0W-20, 0W-40, 5W-20, 5W-30 and 10W-30.
5. Motul 8100 X-CLEAN
The last representative on this list will please dieselists. This 100% synthetic motor oil is compatible with diesel particulate filters so it can be used in any vehicle that is powered by a turbo diesel engine. It is specially formulated for vehicles with three-way catalytic converters and will help preserve engines while protecting the environment.
This synthetic oil is suitable for gasoline engines and complies with EURO IV and EURO V standards.
Available in 5W-30 and 5W-40.
You can choose engine oil for Ford Focus 2, knowing the year of its release, mileage and, most importantly, the engine. You can upload both original and non-original. There are 4 types of original and several dozen non-original oils suitable for this car. Let's start with the original:
1. Ford Formula oil F 5w30. This is the most popular product for Ford Focus 2. It is recommended to fill it in all gasoline engines with a mileage of no more than 100-150 thousand kilometers or for long-term driving at speeds above 3000. Why only before this run? Because with a higher mileage, it usually begins to evaporate. The motor starts to "eat" oil. This is due to the low high-temperature viscosity (30) and because of its composition - it is the so-called hydrocracking (this is a simplified production technology).
By the way, look at the photo, here it is - the original Ford Formula 5w30 oil. Remember his article 15595E, this is a new article that has not yet been counterfeited.
2. Oil Ford Formula S/SD 5w40. This product was created "to help" for Formula 5W30. It has a synthetic composition, does not fade under high loads and high mileage. An excellent choice for gasoline and diesel engines.
3.Ford Castrol 5w20. We do not recommend pouring it into Focus 2. This oil is designed specifically for Ecobus engines (with a turbine). Although official dealers pour it into Focuses, there is no point or benefit in this - it costs 30% more than the formula. Moreover, it forms a thinner protective oil film, because it is “energy-saving”. Definitely - no need to pour such oil!
4. Ford Castrol 5w30. Special product for new generation diesel engines and Ford Focus ST. This oil has approvals for diesel and gasoline engines, but with priority for a diesel engine. It makes no sense to recommend it for Ford Focus 2 - Focus 2 production ended (in 2011) a year before the start of production of this product (2012).
So - editor's choice — oils Ford Formula 5w30 and 5w40. Focus on the oil burner - if 5w30 oil is filled, then go to 5w40. Now you know,
The regulations for replacing engine oils for the second generation Ford Focus, as a rule, are being revised in the direction of reducing mileage. Therefore, the optimal period between lubricant changes in the motor will be 7-8 thousand km . What kind of oil is better to fill in the Ford Focus engine and how much, does it make sense to look for official Ford oil, let's figure it out right now.
What oil is filled in Ford Focus 2 at the factory
Mileage over 150,000 km. There is practically no oil consumption, within normal limits. Lem Castrol.
All Ford Focus cars after 2009 come off the assembly line with a semi-synthetic called Ford Formula F 5W-30 in the engine. This oil complies with Ford WSS-M2C913-A and Ford WSS-M2C913-B approvals.
Conveyor oil is produced by the French corporation Elf, while the manufacturer does not recommend changing the lubricant in the engine until the first scheduled maintenance. This is explained special characteristics of semi-synthetic oil , which contributes to high-quality running-in of the engine.
Fake Ford Formula F 5W-30
A fake is distinguished by unclear text and a dimensional structure on the side of the container.
D0 2009
original oil.
For engines assembled before 2009, when replacing the old lubricant with Ford Formula F 5W-30, there is no need to use any special flushes and other fluids, the replacement technology also does not change for topping up old engines with Ford Formula E 5W-30 oil new Formula F oil can be used.
Actually quite it is not necessary to use Ford Formula F 5W-30. It is quite enough that the selected oil meets the Ford WSS-M2C913-A and WSS-M2C913-B standards, especially since, for obvious reasons, Ford does not produce any oils and uses third-party products.
What oil is better to fill in a Ford Focus 2 engine
If there is no desire to experiment with the semi-synthetics recommended by Ford, you can safely try pouring oil from the American manufacturer Motorcraft full synthetic 5W-30 S API SN.
It is a high quality synthetic product that has Ford approvals . At the same time, the price of this oil is one and a half times lower than the promoted European brands.
How much to pour?
Filling volumes of oil.
For a two-liter Ford Focus engine, at least 4.5 liters will be required.
Analogues
PETRO CANADA 5W-30.
Of the European brands, Castrol Edge 5W-40 Fully Synthetic, Castrol Magnatec 5w-30 are often used, but they are significantly more expensive. There are also more budget series - Motul 5w-30 913C. They ask for 2.5 thousand for 5 liters.
Specifications
By following the specifications, you can maximize the life of the engine.
In a word, the main indicators of the applicability of motor oils for the second generation Ford Focu remain:
- factory specifications Ford WSS-M2C913-A and Ford WSS-M2C913-B , which should be indicated on the sticker, or simply a recommendation from Ford;
- depending on climatic conditions, oils with viscosity characteristics according to SAE 5W-30 and 5W-40 .
Oil filter
Sectional view of Bosch oil filter 0 986 452 044. Made with quality.
When changing the lubricant, it will be necessary to replace the oil filter.
For 1.4 and 1.6 liter engines, a branded Ford filter will have a catalog number 1714387-1883037, but in addition to it, you can use analogues from Suzuki with a catalog number 16510-61AR0, Bosch filters 0 986 452 019, Bosch 0 986 452 044, Fram PH3614, as well as German filters Mann W 610/1 enjoy a good reputation.
conclusions
Therefore, for any Ford Focus engines, we use oil of any manufacturer we like with Ford approvals and the SAE viscosity characteristics indicated above. Good luck to everyone and a great resource of the motor!
Along with the products of AvtoVAZ and Hyundai, the Ford Focus model is a cult model in our country. The number of owners is steadily growing, and these are not only buyers of new versions, but also participants in the "secondary" market.
Before buying a used car, a potential owner collects certain information:
- features of operation;
- disadvantages, advantages over classmates;
- the procedure for passing and the cost of routine maintenance;
- what spare parts and consumables are used.
Let's take a closer look at the last point. Today we’ll talk about which oil is best for Ford Focus 2, especially after the end of the warranty period.
The main problem for used cars is that the owner often does not follow the regulatory procedures and tries to save on consumables. This leads to accelerated wear of the engine, or its breakdown.
What is poured into the Ford Focus 2 at the factory?
It's no secret that car plants do not organize the processing of petroleum products. All liquid consumables are ordered from other manufacturers, and are delivered to the conveyor with the logo of the car factory on the packaging.
For the European division of Ford Motor Company, the oil is produced by the French company Elf. Of course, the Ford logo flaunts on cans and barrels, consumables belong to the brand of the automaker.
Oil for Ford Focus, as well as for many other models with similar engines, is called Ford Formula F 5W-30. 
It comes to the factory in 200 liter barrels, and dealer service stations can use 5l and 1l packages.
What oil is best for a Ford Focus 2 engine
If you bought a new car from a dealership, it will have the original oil in it. Moreover, during the entire warranty period, you will not be tormented by the question of what consumables to change during scheduled maintenance (unless, of course, you are going to violate the terms of the warranty).
All work is carried out by a dealer workshop, Ford engine oil is poured in accordance with the instructions for the regulations. 
Lubricants meet all parameters and quality standards:
This is quite a high-quality semi-synthetics, which has been tested for decades. With the advent of each subsequent manufacturer's tolerance, the composition of additives changes slightly (of course, for the better), but the basic basis remains the same.
For American owners (this model is also produced for the overseas market), the products of the court supplier of spare parts for Ford, Motorcraft, are offered.
There is an opinion of a number of experts and experienced motorists that synthetic oil is by default better than semi-synthetics, and even more so mineral water. Especially a lot of these tips apply to engines with solid mileage. There is no point in arguing about this topic.
The best advice is to follow the manufacturer's instructions. The regulations for a run of 20,000 and 200,000 km indicate the same oil: semi-synthetic 5W30. There are no scientifically proven facts of the miraculous transformation of an old motor into a new one (when switching to full synthetic).
The use of one or another basis (within the framework of the factory tolerance) is a personal matter for everyone. It will not be worse for sure, it is also pointless to wait for improvements in the operation of the motor.
How much oil should be poured into Ford Focus 2, and what amount of oil should be left "for topping up" until the next MOT? There is no single-digit volume for a Ford Focus 2 car. More precisely, there are many options, depending on the type of engine.
| Ford Focus 2 | ||||
|---|---|---|---|---|
| Engine | L.S. | Year of issue (beginning - end) | Engine oil volume (l.) | |
| 1.4i 16V | 75 | 1999 | 2005 | 3.75 |
| 1.4 Duratec 16V | 80 | 2005 | --> | 3.80 |
| 1.6 TDCi | 90 | 2005 | --> | 3.80 |
| 1.6 TDCi HP | 109 | 2005 | --> | 3.80 |
| 1.6i 16V | 100 | 1999 | 2005 | 4.25 |
| 1.6 Duratec 16V | 100 | 2005 | --> | 4.10 |
| 1.6 Duratec Ti-VCR 16V | 115 | 2005 | --> | 4.25 |
| 1.8 Turbo DI | 90 | 1999 | 2005 | 5.60 |
| 1.8 Ti | 75 | 1999 | 2005 | 5.60 |
| 1.8 TDCi 16V | 115 | 2001 | --> | 5.60 |
| 1.8i 16V | 115 | 1999 | 2005 | 4.25 |
| 1.8 Duratec HE 16V | 125 | 2005 | --> | 4.30 |
| 2.0i 16V | 130 | 1999 | 2005 | 4.25 |
| 2.0 Duratec HE 16V | 145 | 2005 | --> | 4.30 |
| 2/0 TDCi | 135 | 2005 | --> | 5.50 |
| Used oil FRD WSS-913A/B SL SAE 5W-30 | ||||
The spread is quite large, if you buy standard packages - there will always be a certain margin. You should be aware that during a normal replacement (without a vacuum pump), a certain amount of lubricant always remains in the motor.
Therefore, a supply of 200-500 ml is provided in any case. During normal operation, and a serviceable engine, this volume should be enough “for topping up” between maintenance.
Important: If you buy oil in North American packaging (in this case, it is Motorcraft), the volume will be slightly less.
The US unit of measure for volume is the quart. 1 quart equals 946 ml, so if you order 5 liters of American oil, you will get 4.73 liters of European oil. By the way, the volume of oil in engines manufactured in the USA (for the USA) is tied to the integer quart.
In any case, such an amount is poured only into a “dry” engine. With the current replacement, the stock still remains.
Analogues of "branded" oil for Ford Focus 2
There is no hard binding to the manufacturer. The main thing is that the Ford WSS-M2C913 approval is present on the label, and the SAE viscosity corresponds to the maintenance instructions.
Motor oil for Ford Focus 2 is not unique in composition; all leading manufacturers offer a replacement: both more expensive and cheaper.
If you are a fan of pure synthetics, you can pour Castrol Edge 5W-30 Fully Synthetic or Castrol Magnatec 5w-30. For more economical owners, Motul 5W-30 913C or Lukoil Armortech Genesis 5W-30 is offered.
Petro Canada Supreme Syntetic 5W30 is often used - a solid semi-synthetic from the USA. Moreover, when pouring any analogue, a complete flush is not required. It is enough to shorten the first interval after the brand change to 3000 km.
Ford oils are often counterfeited
Most often, you can find a fake of branded oil on Ford Focus 2. It is easy to identify counterfeit, here are the signs of the original:
What is the difference between fake oil and the original - video
Conclusions:
Buying oil for Ford Focus 2 is much easier than for many other foreign cars. With all the richness of choice, there is no point in chasing advertising promises. It is better to pour branded oil into the Ford Focus engine.
And in order not to fall for counterfeit goods, you need to buy consumables in stores where you can be provided with accompanying documents for the goods.
