Tuning polo sedan direction is very peculiar and ambiguous. Volkswagen Polo was designed by designers in such a way that not all methods will be suitable for its upgrade and not every experience will do. This is a modern and well-thought-out car. Elements that could be improved in its design began to be present even during its creation. For example, this is a filter zero resistance and forged cylinders. To change other details, the car is simply not “sharpened”. IN Volkswagen Polo no space for compressor and intercooler. Designers simply did not take these components into account. Therefore, in order not to spoil anything in this beautiful car you need to tune it in such a way as not to spoil the integrity of the entire already well-thought-out system.
Like cars Volkswagen, Polo sedan lends itself perfectly to chip tuning of the engine. Having given several thousand rubles for proprietary developments, the driver is able to modernize the fuel and exhaust system, enhance the dynamics and torque, and greatly reduce the acceleration time.
If we touch on the topic of auto-visage, then it should be said that there are a lot of options in this area. The owner of the Volkswagen Polo is quite capable of radically modernizing in the direction big plus sedan optics, attach to the body additional accessories: body kits, spoiler, change moldings.
Do-it-yourself tuning polo sedan involves a very serious chip tuning. At the first stage of this type of work, you need to connect the K-Line adapter to electronic system control of the engine, the entrance of which is located under the steering wheel. The other end of the adapter USB output we connect it to a laptop computer, turn on the ignition of the car and after a few seconds information about the state of the car will be displayed on the laptop monitor. Activate computer program Chiploader and start working on the regulation of the engine operation system. It is very important to be able to choose the optimal scheme for each of the available elements by moving the slider. Bringing the calibration to the maximum performance does not make much sense. For example, moving the slider to left side, you can reduce fuel consumption by almost 2 l / 100 km. But experts do not advise doing this because, along with achieving an increase in efficiency after such manipulation, a decrease in the stability of the operation of the entire engine at the high gear level is formed. It is recommended to reduce consumption by no more than 1.2 l/100 km.
After the regulation is completed, we start the reinstallation software. It is necessary to wait until the loading indicator is completely colored in green color. Then, after the offer to install the utilities, press the OK window and turn on the ignition. We disconnect the adapter wires and proceed to the test stage of the improved Polo sedan.
Due to well-conducted chip tuning, the power of the engine will increase by 12%, the torque will increase to 1100 Nm, and fuel consumption will decrease by at least 1 liter. The issue price of such an upgrade will fluctuate around 2000 - 3000 thousand rubles, which, taking into account the brand and class of the car, is considered very inexpensive and allows almost anyone to do this work. Volkswagen owner.
Refinement of optics
Refinement of native factory optics is also an important matter. Tuning Volkswagen Polo it is considered mandatory if you decide to do it.
To effectively implement your ideas in this direction, you will need a set of neon lamps, a screwdriver and double-sided tape. Shoot first protective glass factory volkswagen headlights Polo sedan and carefully place them side by side. Wash and wipe it if you find a large accumulation of dirt. After that, start pasting the inner rims over the headlights with double-sided tape, to which you attach the neon bulbs. We stretch the wiring connected to them under the hood and take it out already in the cabin. We connect the wiring to the cigarette lighter and test the operation of the lamps. If everything is in order, put the glass in place and begin to disassemble, clean and update the second headlight. When mounting additional accessories to illuminate the road, it is necessary to check the symmetry of the new elements in each of the headlights. They must be fixed to the adhesive tape extremely evenly and firmly. In addition to installing neon lamps, you can install LED strips in the same way.
Tuning Volkswagen Polo Sedan - installing a spoiler
To successfully implement this direction of the upgrade, you will need masking and double-sided tape and sealant. Using masking tape, we determine the places on the trunk of the sedan on which the part will be attached. We clean and degrease the surface. We glue the adhesive tape to the new spoiler. We apply all this economy to the trunk and keep it motionless in this position for several minutes. Then we cut off the extra parts of the adhesive tape, get behind the wheel and go for a ride on updated car.
Volkswagen polo interior tuning
The salon in this car is very wisely thought out. The driver has all the little things, buttons, knobs, levers and drawers right at hand. It's hard to find fault with something, but it's possible. There is one very significant "jamb". And we will fix it as much as we can. And this “jamb” is called imperfect sound insulation. By seriously working on this topic, you can eliminate all unnecessary and unnecessary sounds that fly into the cabin from external environment.
To do this, we buy a good, branded soundproofing material. We cut out 3 pieces from it for the front doors. There will be 6 layers. The sizes of the pieces should correspond to the sizes and shapes of the doors. For the rear doors of the Volkswagen, 2 pieces are needed. For the floor in the car, prepare one layer, and for the ceiling, two parts of the material. There are also arches, you also need to remember about them, there should be mounted material capable of absorbing vibration.
We cut off the junk in the Polo salon and mount it new material. If the native fasteners turned out to be short and do not hold firmly, then screw in additional self-tapping screws.
"Do-it-yourself tuning photo" has become a popular query on the Internet. This is understandable, because not everyone is satisfied factory equipment so I want to add something new. was no exception, because most often they change it with their own hands. The owner has a limitless choice of how to improve his car. logical, because standard equipment not suitable for most drivers. This manual will tell you how to make the car unique.
Tuning Polo Sedan do it yourself
We will tell you how you can change with minimal effort appearance car, make it more convenient and better.
Do-it-yourself headlight tuning Polo Sedan
At first glance, it may seem that tuning the Polo Sedan headlights with your own hands is complicated, but this is a delusion. Such changes do not require much time and large financial investments. There are such types of tuning optics:
It can be concluded what to do tuning Volkswagen Polo Sedan do it yourself, namely to change the optics, is quite easy. The effect will exceed all expectations.
Tuning Volkswagen Polo Sedan do it yourself
Craftsmen are trying to completely do the tuning of the Polo Sedan with their own hands, which they do quite well. They can change both external and internal components of the car. For example, tuning of the Polo Sedan interior is being done, and with their own hands. It is lined with leather or fur. You can also add LED lighting. 
Given the annual sales volumes, Polo can be safely called one of the most popular models. Repeatedly it was one of the three leaders on automotive market. Among distinctive advantages– numerous technical innovation, sports style and original visual design. Additional points in favor of popularity gives the opportunity to carry out tuning Volkswagen Polo to translate into reality your ideas in the field of functional transformation and restyling, improvement technical parameters, internal configuration and appearance.
Tuning Volkswagen Polo sedan is considered to be a rather non-trivial and specific direction. The designers worked on it so that not all upgrade paths could be applied. The machine is more than functional and modernized, elements that can be improved were available even at the design stage. These elements include forged cylinders and a zero resistance filter.
Other elements are physically impossible to change.
There is simply not enough space for a compressor or intercooler. These components were not even taken into account by the authors initially. As a conclusion, tuning the Polo sedan should be done in such a way that the integral image of a well-thought-out system is not destroyed. As for the available upgrades, the successful ones will be:
- chip tuning of the motor;
- exhaust and fuel system proprietary developments;
- increased torque and dynamics;
- a significant reduction in acceleration time.
There are also many options for visual transformation. cardinal changes may touch the optics. You can also install accessories for the Volkswagen Polo sedan: new moldings, spoiler, body kits on the bumper.
First of all, many Volkswagen owners Polo Sedan strive for external transformations of the TS. It is worth considering the following options.
- Airbrush painting allows you to make the car truly unique.
- Installing a spoiler and new body kits significantly improves aerodynamic properties. Don't forget to ask air currents the right direction.
- Installing original discs for many is the first stage of tuning. This solution attracts spectacularity along with its budget and simplicity.
- The aerodynamic suspension will transform the appearance of the vehicle and make it more predatory. With regular driving, add a car also sports tires and new alloy wheels.
- The body can be equipped with lighting, which will demonstrate metamorphosis when changing musical rhythms.
- A mesh with railing attached to the trunk will improve not so much the visual component as the functionality. Transportation of things will become more convenient, and a special stop fixed under it will help to remove noise in the hood area.
- The so-called "angel eyes" are quite popular. This is a round transparent tube with LEDs inside. Costs in this case minimal, both temporary and financial.
- Lanterns can also be upgraded. For example, it is possible to eliminate the light wall, which is formed at the moment of crossing into another car, due to xenon.
- It is possible to increase the decorative properties and at the same time safety by means of additional LEDs and rear stops.
- Special cilia for the headlights will make the image of the VW Polo sedan more original and memorable.
The following measures will make the salon more cozy and comfortable.
- Leather or fur upholstery makes the Volkswagen look more status and sophisticated.
- Subwoofer, speaker system, route maps and TV - these are the accessories that make the salon stylish and comfortable.
- Installing acoustics leads to the need to improve sound insulation. The use of appropriate materials will reduce the noise level by 40%. Soundproofing techniques are discussed in more detail below.
The following vehicle upgrade options will make acceleration more powerful:
- installing Eibach springs will eliminate the feeling of bumps on the roadway;
- the new aerodynamic system will make the movement really fast;
- Automatic transmission and turbocharger motor will turn the car into a sports work of art;
- chip tuning allows you to achieve an instant response of the car to the acceleration command;
- sports suspension and new tires combined with a weight loss of 85 kg also contributes to fast acceleration(you can reduce weight by eliminating rear seats and wheels in the trunk);
- additional acceleration speed can be obtained by switching to AI-95 plus fuel and installing light alloy wheels;
- attach a radiator grille to ensure the correct air volume.
DIY tuning
Having considered the basic ideas of tuning and choosing the most suitable options for yourself, it's time to decide whether you will independently carry out the desired manipulations or use the help of masters. If you prefer the first option, you should read a few instructions.
The mentioned manipulation is performed with a reference to the following instruction:
- Connection to control electronics motor K-line adapter. In the area below the steering wheel you will find the corresponding entrance.
- Connect the second end to the laptop.
- After activating the ignition, wait a couple of seconds and you will see a vehicle status report.
- Next, run Chiploader and start adjusting. For each of the available functional elements, select the optimal scheme by moving the corresponding slider. For example, to achieve a fuel economy of 2 l / 100 km, move the slider to the left. This manipulation is theoretically possible, but it is better not to resort to it, since in parallel to high gears the stability of the motor is reduced. The economy limit of 1.2 l / 100 km is considered optimal.
- Reinstall software. Wait for the indicator to turn completely green.
- Install the utilities and activate the ignition.
- Disconnect the adapter wires and test the improved car.
Properly carried out manipulations can increase engine power by 12%, reduce gasoline consumption by 1 liter and increase torque indicators up to 1100 Nm.
Given the class and brand of the car, the cost of such manipulations is affordable and amounts to 2-3 thousand rubles.
To upgrade the optical system, prepare double-sided tape, a screwdriver and a set of neon lamps.
Work order:
- Get rid of the protective glass of classic headlights. Clean them if necessary.
- Use double sided tape to trim the inner bezels above the headlights.
- Pull the connected wiring under the hood and bring them out into the cabin.
- Test the operation of the lamps after connecting the wiring to the cigarette lighter.
- If no problems or shortcomings were found during testing, proceed to the second headlight. Make sure that the installed accessories are symmetrical and secure.
A similar principle can be used when installing LED strips.
Prepare sealant, double-sided and masking tape. Next, you need to perform the following steps:
- To determine the areas on the trunk where the spoiler will be fixed, use masking tape.
- Thoroughly clean the surface and treat it with a degreaser.
- Glue adhesive tape to the new spoiler and attach the structure to the trunk. Hold for a few minutes for a secure bond.
- Get rid of excess tape.
Volkswagen Polo is designed in such a way that not all known methods are suitable for tuning it. Some elements that can improve it are already installed in the sedan. These include a zero resistance filter and forged cylinders. The machine is simply not adapted for mounting other parts. So, the Volkswagen Polo does not provide space for the compressor and intercooler. Therefore, in order not to violate the integrity of the Polo design, it is worth taking on the work that will not entail interference with its other systems.
Like all other models Volkswagen brands, Polo sedan lends itself well to engine chip tuning. By spending several thousand rubles on licensed utilities, the driver will be able to tune the fuel and exhaust systems, increase dynamics and torque, and also reduce the acceleration time of the sedan.
A way to find out why CHECK is on!
As for tuning the appearance of a sedan or hatchback model, there are much more options here. Any interested owner of a Volkswagen Polo will be able to improve the optics of his sedan, install additional accessories on the body: body kits, spoilers, change moldings.
ECU firmware replacement Volkswagen engine Polo is easy enough to do yourself. Before starting work, you need to purchase high-quality licensed firmware and equipment, without which you cannot do chip tuning with your own hands. So, we need:
- Chiploader program;
- K-Line adapter;
- latest version standard firmware engine ECU;
- laptop with Windows XP.
At the beginning of chip tuning, you need to connect the K-Line adapter to the engine control unit, which is located under the steering wheel of the Volkswagen Polo sedan. The second end of the adapter is connected to the laptop via the USB output. Next, turn on the ignition of the car, after which we will see information about the block on the laptop display. We launch the Chiploader program and proceed to setting the parameters of the engine. Here you need to choose the optimal setting for each of the available elements by moving the slider. But do not calibrate to the maximum. For example, by dragging the slider to the left, you will be able to reduce the fuel consumption of your Polo sedan by almost 2 l/100 km. It is not recommended to do this, because along with the savings after chip tuning, you will receive unstable job engine in high gears. You can reduce consumption, but not more than 1.2 l / 100 km.
Chip tuning Volkswagen Polo
In the same way, it is worth calibrating all available systems in the Chiploader program. After setting, we start the installation of the previously downloaded firmware. Next, you need to wait until the loading line turns green. You will be prompted to complete the installation of the utility. Click OK and turn off the ignition. Disconnect the adapter wires and start testing the improved Polo sedan.
Thanks to chip tuning, engine power will increase by 12%, torque will increase to 1100 Nm, and fuel consumption will be reduced by at least 1 liter. The cost of the improvement will be about 2,000 rubles, which allows any Volkswagen owner to perform chip tuning.
IT IS IMPORTANT TO KNOW!
Every driver should have one universal device to diagnose your car. Now without an autoscanner just nowhere!
Read, reset, analyze all sensors and configure on-board computer car you can independently with the help of a special scanner ...
Improving standard optics, unlike additional accessories for the body, will come in handy in any case. To work, you will need a set of neon lamps, a screwdriver and double-sided tape. First, dismantle the protective glass regular headlights Volkswagen Polo sedan and put it aside. Taking this opportunity, you can clean the item from insects and dirt. Next, carefully paste over the inner rims above the headlights with double-sided tape, to which we attach the neon lamps. We drag the wires from them under the hood and pull them out in the cabin. We connect the wiring to the cigarette lighter. Next, we check the operation of the lamps. If everything worked, you can install the glass in reverse order and start working on the second Polo headlight. When installing additional accessories for road lighting, it is very important to check their symmetry in each of the headlights. They should stick to the adhesive tape as evenly and securely as possible. In addition to installing neon lamps, you can install LED strips.
Improving the standard car optics
Another method of effective Polo tuning is the installation of a spoiler. For work, we need masking and double-sided tape, as well as sealant. Using masking tape, we put marks on the trunk of the sedan where the part will be attached. Next, we proceed to cleaning and degreasing the surface. After that, glue the double-sided tape to the new spoiler. We apply the element to the trunk and hold it in this position for a while. After that, cut off the unnecessary parts of the adhesive tape and you can continue operation of Volkswagen Polo sedan.
The features of the interior of the compact Polo include the presence of almost all necessary for the driver little things. The owner of this car always has everything at hand. But there is still one problem in the cab of the sedan that should be fixed first. This is poor soundproofing. By replacing it, you will get rid of unwanted sounds that enter the interior of your Volkswagen Polo from the street.
To perform tuning in the cab of a sedan, you need to purchase high-quality soundproofing material. After the purchase, we cut out 3 pieces in the product for each of the front doors. You should end up with 6 layers. The dimensions of the pieces of material must correspond to the dimensions and shapes of the doors. For each of the Volkswagen rear doors, you need 2 pieces. For the floor of the car, it is necessary to cut out one layer, and for the ceiling, 2 parts of the sound insulator. Do not forget about the arches, which also need to be covered with a material that can absorb vibration.
Next, remove the regular upholstery of the Polo and install the material. We fix it with the help of special fasteners and mount a standard upholstery on top of it. If the standard upholstery fasteners are too small, you should use additional self-tapping screws.
tuningkod.ru
Polo sedan: tuning a harmonious car with your own hands
One has only to glance at the new polo sedan, as the tuning of a harmonious car fades into the background. Even now it is hard to believe that this budget model designed for people with average incomes.
Surprisingly, this vehicle completely adapted to domestic roads, unpredictable climate and gasoline of terrible quality. Designers took into account the shortcomings previous versions auto, so a new sedan; got a slightly enlarged ground clearance, reinforced suspension, high-quality galvanized body and a package designed; for all climatic zones, including cold ones.
Do-it-yourself tuning polo sedan: a selection of photos
If you want to emphasize some individuality of your car, then get ready to use different LEDs in the underbody or interior area.
You can also customize the trunk. As soon as the night falls on the ground, your car will make a splash, because; the dynamic lighting of the car will simply attract the eye of any passer-by.
How to turn a polo sedan into a UFO with underbody lighting:
Cut the tape strictly at the point of separation of the LEDs. Do not forget to degrease the surface, glue everything. Remains removed protective layer exposing the adhesive backing. Carefully align the adhesive surface with the bottom so that the tape is not visible, connect the wires to the one that goes to the headlight. It remains to be checked. The effect is amazing: it seems that the car is sliding over the asphalt surface.
illustrative example look at the video:
If you want to buy a good acoustic system, then you have to additional sound insulation. To do this, you will need vibration-absorbing material SGM Vibro M2F, soundproofing material SPLEN - 4, which will reduce the noise level in the car by 40%.
It is better to buy a complete package and do the tuning of the polo sedan interior with your own hands:
- 3 layers of Vibro M2F and the same amount of SPLEN 4 will go to the front door;
- the back door will require material in the same proportions; - 4 layers (SGM Vibro M2F - 2 layers, SPLEN4 - 2 layers)
- on the floor 1 layer;
- for ceiling ceiling - 2;
- wheel arches – 1:1;
- the trunk will take 2 layers;
- hood - only 1 layer Vibro M2F.
Soundproofing tuning of the ceiling is carried out if there is no hatch there.
SGM Vibro M2F is a new generation bituminous material, where our outer layer is aluminum foil and a two-millimeter adhesive layer, the surface of which is protected by anti-adhesion paper. SPLEN-4 is not only sound, but also an insulating material with low thermal conductivity, allowing the operation of a car even when temperature regime at -70o Celsius.
Tuning the dashboard polo sedan
To make tuning dashboard successful polo sedan, buy the premium package: previous models don't have what you need. The work is not difficult when it comes to replacing the backlight.
It does not differ much from those that were carried out when tuning Golf 2, but some nuances will have to be finalized:
- if it stays on all the time high beam, then set original mileage from the old panel;
- the same, but with a check: you should check the coolant (the device will not find it due to the fact that the pins are not provided in the tank) and change the tank itself, then stretching the wires;
- if the new tidy produces an English font, then drive the car to the diagnostician: let "Vasya" fix everything.
vsepoedem.com
Tuning "Polo Sedan" (Volkswagen Polo Sedan). Specifications, photos and reviews
The first Polo was shown to the automotive public back in 1975, but these cars were designed for German and European consumers. Since then, the line has been constantly developed. But these cars were not sold in our country.
In 2010, the company introduced the Volkswagen Polo. This sedan was created specifically for post-Soviet conditions. There was nothing fundamentally new in the model. This is the most common class B sedan based on the Polo platform.
The appearance of the car is also very ordinary. That is why the owners do the tuning of the Polo Sedan, and they do it well. After all, there is work to be done here. Specifications the car is quite mediocre, the interior is unfinished in places.
External tuning
Like for the rest of the army of cars, for "Polo" in special stores you can buy any kits to improve the appearance. The stores today have everything that the owner lacks. Among the wide variety of everything offered, you can choose body kits in absolutely any style, but it is worth remembering that German designers also eat their bread for a reason, so the Polo design was radically changed.
If we compare it with the previous model, now the Golf is looking at the motorist in small sizes, and his eyes are a little suspicious. Why is he angry? It's simple - at the factory, the body was not understaffed with body kits and special nets.
This grid is intended not only for decoration.
All those drivers who know what Russian roads with their gravel, we are sure that if this mesh was included, the bumper would not have to be painted so often. Plus, this thing looks pretty good. From this it is worth starting to do tuning. Do-it-yourself Volkswagen Polo Sedan to improve, and you should start with this accessory.
Improving aerodynamics
As you know, tuning is not only beauty. It's also a benefit. Therefore, in addition to the external effect, spoilers and body kits can significantly improve aerodynamic performance and redirect air flows. In addition, speaking again about the appearance, it is worth mentioning that these details will give the car a characteristic racing outline.
A spectacular grille radiator will allow the car to receive not only increased air flow, but also give a spectacular, serious appearance. Such changes in the appearance of the car allows you to make tuning. "Volkswagen Polo Sedan", the photo of which is presented in the article, looks very serious and "sporty".
We use LEDs
With the help of these small elements, the individuality of the sedan can be significantly emphasized.
You can stick the LED strip in the bottom area or in the interior area. Many adapt such a light to the trunk. As soon as the night comes to the city, small sedan will be able to make a splash, because the dynamic lighting will surely make passers-by look around.
Turning a sedan into a UFO
For example, it is very simple and inexpensive to turn a small city sedan into a UFO, and this is not a joke at all. To do this, you need to measure the perimeter of the bottom of the car and buy the right amount of flexible waterproof led strip. The tape is cut into 6 pieces. The first part is attached to front bumper, the second - on the back, two pieces - on the sides, and two more - on the thresholds.
Cut the tape only at the points where the LEDs separate. Do not forget about degreasing the surface. All this must be glued. The wires are connected to those that go to the headlights. It will be very spectacular tuning"Polo Sedan". The car literally glides over the asphalt. It's worth a try.
Optics
As for daytime running lights, it is not entirely clear whether they are needed according to traffic rules. However, motorists put them with great pleasure. Today in stores you can find a huge number of different optical means for every taste and color for this model. There are both LED and traditional solutions to choose from. When choosing also accessories, it is advisable to familiarize yourself with the traffic rules, where the brightness should be indicated lighting fixtures. After all, the cool and spectacular tuning of the Polo Sedan involves only the brightest lights, and they can easily be a violation.
If we talk about fog lights, then here, too, the choice is huge. One of the most expensive, Hella, can be purchased already complete with special bumper pads. Well, they look very impressive, however, and their price is not less than 10 thousand. But there are factors that justify this. These foglights are lined, but there have never been any complaints about the quality.
You can also purchase those that are a little easier.
They are unlensed and cost about 6 thousand, but the difference is hardly noticeable to the untrained eye. Yes and fog lights is useful and necessary thing. In addition, these will be branded and beautiful, which is very important for tuning.
Suspension and chassis
The engineers who created the Polo adapted the suspension specifically for Russia. True, after this fitting process, no tests were carried out as such. The whole adaptation came down to the fact that the designers tightened the suspension and strengthened the springs.
Today, tuning can be done easily and inexpensively. Do-it-yourself Polo Sedan is tuned in the suspension plan using kits that are offered in stores. With them, you can significantly change its characteristics.
Unfortunately, it will not be possible to achieve radical changes - the car will still not be able to participate in the rally. However, you can very effectively lower the ground clearance and adjust the springs to fit. the necessary conditions use.
As for the disks, tuning of the Polo Sedan is possible here for every taste. The main thing is to have enough money. So many discs have been created for this baby that you can choose a whole week. At the same time, there are even special models for this particular machine. Their diameter is only 14”, but this car is more than enough of such dimensions.
Noise isolation
The manufacturer did not care too much about this, so during tuning, motorists have to take action on their own, especially if the owner loves good music. No extraneous sounds should be heard in the cabin.
For this, vibration-absorbing materials are purchased, for example, SGM "Vibro M2F", "SPLEN-4".
This will reduce the noise level in the cabin by about 40%, which is actually very, very much.
Experts note that it is best to immediately purchase a complete package and carry out the work in a comprehensive manner. So, for the front door you need about 3 Vibro sheets. "SPLEN" fits too. For back door you will need the same materials. One sheet is laid on the floor, the wheel arches are soundproofed in the same way. Two will go to the ceiling. Trunk - two layers. In the hood - 1 layer "Vibro".
Work on the salon
So, when everything is done outside, you can move inside. There is plenty of work here too. Driving a car should be comfortable and enjoyable. When working on a salon, everything depends only on imagination and financial capabilities.
