What kind of oil to fill in Corolla 1.6. Engine oil for Toyota Corolla: selection and replacement

24.07.2019

Engine Toyota 1ZR-FE/FAE 1.6 l.

Toyota 1ZR engine specifications

Production	Toyota Motor Manufacturing West Virginia Shimoyama Plant
Engine brand	Toyota 1ZR
Release years	2007-now
Block material	aluminum
Supply system	injector
Type	in-line
Number of cylinders	4
Valves per cylinder	4
Piston stroke, mm	78.5
Cylinder diameter, mm	80.5
Compression ratio	10.2 10.7
Engine volume, cc	1598
Engine power, hp / rpm	126/6000 134/6400
Torque, Nm/rpm	157/5200 160/4400
Fuel	95
Environmental regulations	Euro 5
Engine weight, kg	-
Fuel consumption, l/100 km (for Corolla E140) - city - track - mixed.	8.9 5.8 6.9
Oil consumption, g/1000 km	up to 1000
Engine oil	0W-20 5W-20 5W-30 10W-30
How much oil is in the engine	4.7
Oil change is carried out, km	10000 (preferably 5000)
Operating temperature of the engine, hail.	-
Engine resource, thousand km - according to the plant - on practice	n.a. 250-300
tuning - potential - no loss of resource	200+ n.a.
The engine was installed	Toyota Auris Toyota Verso Lotus Elise

Malfunctions and repair of the 1ZR-FE / FAE engine

These motors were presented to the public in 2007 and were considered as the successor to the unsuccessful ZZ series. The family consisted of 1.6 liter 1ZR, 1.8 liter. , 2.0 l. , as well as Chinese 4ZR, a working volume of 1.6 liters. and 5ZR 1.8 liters. Consider the youngest representative of the main model range- 1ZR, this engine was called to replace the motor. In the new 1ZR, to reduce the load on the sleeve, the axis of the cylinders does not intersect with the axis of the crankshaft; Dual VVT-i, in other words, a system for changing the valve timing on the intake and exhaust shafts, at the same time, the Valvematic system appeared, which changes the valve lift (range 0.9 - 10.9 mm), hydraulic compensators appeared and now valve adjustment on 1ZR does not threaten you. By new tradition Toyota, the ZR engine is disposable, in an aluminum block, without repair dimensions, with all the consequences.

Toyota 1ZR engine modifications

1. 1ZR-FE - main engine, equipped with dual VVTi, compression ratio 10.2, power 124 hp This motor was equipped Toyota Corolla and Toyota Auris.
2. 1ZR-FAE - an analogue of 1ZR-FE, but together with Dual-VVTi, Valvematic is used, the compression ratio is increased to 10.7, engine power is 132 hp.

Malfunctions, 1ZR problems and their causes

1. high consumption oils. The problem is typical for the first ZR models, it is solved by filling oil with a viscosity of W30, instead of 0W-20, 5W-20. If the mileage is serious, then measure the compression.
2. 1ZR engine knock. Noise at medium speeds? Change the timing chain tensioner. In addition, noise (whistling) can and drive belt alternator, change.
3. Problems with idling. Swimming and other troubles are provoked by the position sensor throttle valve and the dirty throttle itself.

In addition, the pump on the 1ZR likes to leak, make noise and ask to be dumped after 50-70 thousand km, the thermostat often dies and the engine refuses to warm up to operating temperature, can jam VVTi valve followed by vehicle dullness and loss of power. Nevertheless, these problems are not very common, the 1ZR engine turned out to be quite good, with a normal resource (+\- 250 thousand km) and with stable service, it does not cause problems for the owner.

Tuning engine Toyota 1ZR-FE/FAE

Turbine on 1ZR

The turbocharging of the ZR engine is described using the 2ZR as an example and is successfully repeated on the 1ZR / engine.

Cars from Japanese manufacturers have long been known for their reliability and unpretentiousness. Toyota Corolla can be confidently called one of the most popular cars. The history of the model lasts more than half a century, today eleven generations of Toyota Corolla are known. The impeccable technological qualities of the car, as well as the excellent price-quality ratio, bribe tens of thousands of motorists every year.

Today, statistics show that over the entire period of production, about 50 million copies of the car were sold. The question arises: is this car really good, and what real resource Toyota Corolla engine

Line of power units

Japanese engines loudly declared themselves back in the 90s of the last century. Engineers Toyota managed at that time to create a truly outstanding design, which was distinguished by its small dimensions and big power. Among other things, Toyota Corolla power units are known for their low fuel consumption and high-torque power. The base is considered a 1.4-liter 4ZZ-FE engine with a chain drive. It has a lot in common with the 1.6-liter 3ZZ-FE engine. The manufacturer decided to install a smaller crankshaft and change the piston stroke, thus, it turned out to be constructively similar but less powerful engine with a volume of 1.4 liters.

The 1.6 1ZR FE power unit is considered the most popular and in demand. Structurally, it consists of four cylinders and sixteen valves. This setting predetermines the presence of a chain transmission, which has a positive effect on the engine resource. It was mainly installed under the hood of the Toyota Corolla E150, E160. Technologically, it turned out to be a perfect power unit, which was designed taking into account previous experience, but already more modern technologies. The gas distribution system of the engine is equipped with VVT system I, which contributes to the highest quality power supply to the motor.

How many engines run on Toyota Corolla

The first 250 thousand kilometers, as a rule, both engines pass without any significant problems. The main thing is to change the engine oil on time. The manufacturer recommends changing the lubricant every 10 thousand kilometers. But, as practice shows, to save performance characteristics vehicle and engine life extension scheduled replacement best of all every 7.5-8 thousand km.

Common malfunctions of 1ZZ, 3ZZ, 4ZZ-FE motors:

Increased oil consumption. It is observed mainly among power plants manufactured before 2002. The problem lies in the oil scraper rings, which are best replaced with a 2005 model or newer ones. Oil is added to the level, after which the problem disappears;
Increased noise, engine knock 1ZZ. Occurs at the turn of the first 150 thousand km, and is solved by replacing the timing chain. Valves on Toyota Corolla engines knock in rare cases, and in frequent adjustment dont need;
RPM instability is solved by flushing the throttle and idle valve;
On some engines, vibration often occurs, it is not always possible to eliminate it. You need to check the rear engine mount.

When compared in terms of resources power plants different generations, then, of course, the engines of the 3ZZ, 4ZZ series significantly outperform the older 1ZZ modification. They lend themselves to boring and sleeve, which is a definite plus. But 1ZZ motors are often denied service, they are practically not amenable to major repairs, or carrying out such work turns out to be an unprofitable exercise. It is for this reason that many domestic motorists do not like 1ZZ power plants.

Owner reviews

In Russia, you can often find Toyota Corolla with the VVT 1 system. This modification was assembled taking into account the climatic and other features of the region. It also has four cylinders, equipped injection system nutrition. An indisputable advantage is perfectly adjusted valve timing. Thanks to this, the engine turned out to be quite economical, without losing its factory dynamic characteristics. Japanese engineers claim that their engines run at least 250,000 kilometers without problems, is this really true? Owner reviews.

Engine 1.4

Maxim, Moscow. For a long time traveled for Toyota steering wheel Corolla e150 2008 1.4L engine paired with mechanical box. I can confidently say that in most cases mechanical impact engines of this series require 200-250 thousand kilometers during the passage. A lot depends on the conditions in which the car was used. Wear out first oil scraper rings and caps, also the timing chain needs to be replaced after 120-150 thousand km, as lucky. This is not a major overhaul, but, in fact, a bulkhead of the engine. Since the sealing of the cylinders remains at this point for another good level.
Igor, Krasnodar. Been driving a Toyota Corolla since 2011. The mileage is already 220 thousand kilometers, the engine is still peppy, the car goes well along the highway, I change the oil after 5-6 thousand km, I pour only synthetics recommended by the manufacturer. I adhere to a calm driving style, I don’t drive around the city, with such an attitude towards the car, I think that it will pass at least 350-400 thousand km, and then we’ll see what to do.
Vyacheslav, Tambov. I have a restyled Toyota version Corolla e150 with 1.4L 4ZZ-FE engine. During the operation I realized one thing that timely replacement oil plays important role. Subject to timely service the engine will run for a long time. I always fill synthetics and practically do not deviate from the manufacturer's recommendations. Mileage is 280,000 km, which is definitely good indicator. During this time, I changed the timing chain twice, fuel consumption is adequate, in rare cases exceeds official norm. In general, I am satisfied with the car, the dynamics are also at a good level after such an amount of time.
Vasily, Rostov. The only drawback of the Toyota engine is the inability to conduct overhaul. I traveled 300,000 kilometers on my Toyota Corolla e160 with a 1.4 engine, after which I decided to sell it. The engine was in perfect condition, but decided to change the car because I wanted a new one. I heard that there are still craftsmen and worn-out engines are handicrafted, so there should be no problems here. Need to monitor the status power unit and timely respond to any malfunctions. Then 300-350 thousand Toyota Corolla will definitely pass.

When choosing a car oil for summer or winter, it is important to purchase a lubricant that has an optimal viscosity suitable for the motor. To simplify the selection of lubricant, you can use the information contained in the operating instructions for the car. This manual describes the parameters of the recommended engine oil for Toyota Corolla.

Model 1995 release

The selection of engine oil is carried out taking into account the type of car engine.

Petrol power units

Scheme 1. Recommended car oil density for models up to 1995 of release.

According to this scheme, for the winter, when the air temperature is below +8 0 C, it is better to use motor fluids with a viscosity parameter of 5w-30. The use of lubricants with a viscosity of 10w-30, 15w-40 or 20w-50 is advisable at temperatures above -18 0 C, at a lower temperature regime the use of these oils will lead to poor engine starting and increased consumption fuel mixture.

Scheme 2. Dependence of viscosity motor fluid the temperature of the region in which the machine is operated (models equipped with gasoline engines since 1995 release).

* - model 4A-GE.

** - except for model 4A-GE.

10w-30 is poured at temperatures above -20 0 C;
5w-30 is poured into the 4A-GE model if the thermometer is below +10 0 С;
in broad temperature range, from -30 0 С (and less) to +40 0 С (and more) use 5w-30 (except for model 4A-GE).

Diesel car engines

According to the manual for Toyota Corolla, it is recommended to use CD, CE or CF oil type according to API classifications. The viscosity of lubricating fluids for models up to 1995 is selected according to scheme 1, and for complete sets from 1995, the selection of viscosity parameters is performed according to scheme 3.

Scheme 3. Recommended viscosity for models since 1995 of release.

Based on the data of scheme 2, at temperatures above -20 0 C, 10w-30 is used. 5w-30 oils are used in regions with air temperatures below +10 0 С.

Refueling volumes

The volume of engine oil between the "maximum" and "minimum" marks on the dipstick is approximately 1 liter. Refueling tanks for Toyota Corolla:

Engines 2E and 3E:

2.7 l with oil filter;
2.5 l excluding oil filter.

Motors 4E-FE or 5E-FE:

2.8 l with filter change;
2.6 liters without changing the oil filter.

Auto engines 5A-FE, 4A-FE (2WD):

3.0 l including oil filter;
2.8 liters without changing the oil filter.

Power units 7A-FE:

3.7 l with oil filter;
3.5 without replacing the filter unit.

4A-GE engines:

3.0 l with filter change;
2.8 liters without changing the oil filter.

Power units 2C (until 1994):

4.7 l with oil filter;
4.2 liters without oil filter.

2C (from 1994 to 1995):

4.3 l with filter change;
3.6 liters excluding oil filter.

Power units 2C (since 1995 2WD):

4.1 l with oil filter change;
3.4 liters without changing the oil filter.

2C engines (since 1995 4WD):

4.4 l with oil filter;
3.7 liters without oil filter.

Motors 3C-E(2WD):

5.1 l with oil filter;
4.4 l without filter device.

Powertrains 3C-E(4WD):

4.9 with oil filter replacement;
4.2 liters without changing the oil filter.

Toyota Corolla E110,E111 1997-2002

Car photo

According to the machine's instruction manual, the recommended engine oil for Toyota Corolla is selected by engine type. For power units 2E 1.3 l, you must use the brand of motor oils CD, CE or CF in accordance with the API system or lubricants more high class quality. The recommended lubrication density is shown in Diagram 4.

Scheme 4. The influence of air temperature on the selection of the viscosity of motor fluid for 2E 1.3l engines.

In accordance with scheme 4, it is recommended to use lubricants 15w-40, 20w-40 and 20w-50 if the temperature outside the car is above -9 0 C. If the thermometer is above -23.5 0 C, you should use fluids 10w-30, 10w -40 or 10w-50. If the temperature is less than +8 0 C, then it is recommended to fill in 5w-30.

In the case of 4E-FE 1.3L power units, it is recommended to use SG, SF or higher oil type according to API requirements. The viscosity of the motor fluid is selected according to scheme 5.

Scheme 5. Recommended engine fluid density for 4E-FE 1.3l motors.

According to scheme 5, at temperatures below +8 0 C, 5w-30 is poured. Car oils 10w-30 are used when the temperature is above -18 0 C, and 15w-40 or 20w-50 is poured if the temperature is above 12.5 0 C.

For 4ZZ-FE 1.4 liter Toyota Corolla engines, oils of at least SJ class according to API system. You can also use energy-saving motor oils with the inscription "Energy Conserving" on the canister. The density of the recommended motor oil is selected according to scheme 6.

Scheme 6. Recommended engine fluid density for 4ZZ-FE 1.4l engines.

In a wide temperature range, the manufacturer recommends using 5w-30 lubricants. If the air temperature is above -18 0 C, then the manufacturer recommends pouring more thick oils 10w-30, 15w-40 or 20w-50.

Refueling volumes

The volume of engine fluid required for replacement is:

Auto engines 2E 1.3l and 4E-FE 1.3l:

3.2 l with oil filter change;
2.9 liters excluding oil filter.

Motors 4ZZ-FE 1.4l:

3.7 l with oil filter change;
3.5 excluding oil filter.

Toyota Corolla E120, E130 2001-2007 release

Model year 2006

For Toyota Corolla, the manufacturer recommends using original Toyota Genuine Motor Oil lubricants. The vehicle manufacturer also allows the use alternative oils corresponding in quality. Engine oil requirements:

All-weather motor fluids SL or SM according to API classification with a viscosity of 20w-50 or 15w-40;
Motor oils with a viscosity of 10w-50 or 15w-40 of the SL or SM class according to API classification with the inscription "Energy Conserving", which means energy-saving.
Multi-purpose lubricants certified by ILSAC.

For viscosity selection motor lubricant use chart 7.

Scheme 7. Recommended viscosity of motor fluid.

According to scheme 7 the best choice to save fuel mixture and good start motor in cold weather There are 5w-30 motor oils. At temperatures above -18 0 C, the manufacturer recommends using engine oils with viscosity indicators 10w-30, 15w-40 or 20w-50.

Refueling volumes

The approximate amount of engine fluid needed to raise the level between the lower and full level on the dipstick is 1.5 liters. The volume of engine oil required when changing is 4.2 liters including the oil filter and 4.0 liters without changing the oil filter.

Toyota Corolla E140, E150 2006-2013 release

Model year 2008

Petrol power units

The recommended engine oil for Toyota Corolla is selected based on the type of car engine. For gasoline engines it is recommended to use motor oils with a viscosity of 15w-40 or 20w-50, corresponding to the SL or SM category according to the API classification.

For 4ZZ-FE engines, oils must comply with SAE 10w-30 or 5w-30, also be ILSAC certified and meet SL "Energy Conserving" or SM "Energy Conserving". Viscosity selection is performed according to scheme 8.

Scheme 8. Recommended viscosity for Toyota Corolla cars with 4ZZ-FE, 1ND-TV and 1AD-FTV engines (models ADE150L-AEFNYW and ADE150R-AEFNYW * 1).

Fuel economy and a good engine start in cold weather are facilitated by the use of motor oils with a viscosity of 5w-30. For regions in which the air temperature outside the machine is above -18 0 С, it is permissible to fill in lubricants 10w-30, 15w-40 or 20w-50. In the absence of 5w-30, it is permissible to fill in 10w-30, but with next change it must be changed to 5w-30.

viscosity 10w-30, 5w-30, 5w-20 or 0w-20;
oil class SL "Energy Conserving" or SM "Energy Conserving";
ILSAC certified universal greases.

When choosing a lubricant viscosity for a 1ZR-FE engine, use scheme 9.

Scheme 9. Recommended viscosity for 1ZR-FE motors.

According to scheme 9, the best option to save the fuel mixture and start the engine well in cold weather, there are 0w-20 lubricants. If this oil is not available, then a 5w-30 smear is allowed, but at the next replacement it must be changed to 0w-20.

Diesel car engines

For models 1ND-TV, ADE150L-AEFNYW and ADE150R-AEFNYW * it is necessary to use lubricants corresponding to class B1 according to the ACEA system and type API oils CF-4 or CF. It is also possible to apply the CE and CD classes in accordance with the API regulations. The viscosity of the oil is selected according to scheme 9.

In the case of 1AD-FTV models (model ADE150L-AEFNXW *), it is necessary to fill in ACEA oil class C2, in the absence of these lubricants, it is permissible to use ACEA B1. To select the viscosity of the lubricant, scheme 10 is used.

Scheme 10. Recommended viscosity of engine lubricant for 1AD-FTV engines (model ADE150L-AEFNXW *).

(*) - model code is indicated on the manufacturer's label.

Refueling volumes

Refueling capacities for Toyota Corolla:

4ZZ-FE auto engines:

4.2 l with oil filter;
4.0 liters without changing the oil filter.

Motors 1ZR-FE:

4.2 liters if you take into account the filter;
3.9 liters excluding oil filter.

Power units 1ND-TV:

4.3 liters if you take into account the filter;
3.8 liters without oil filter.

1AD-FTV engines:

6.3 liters with oil filter change;
5.9 liters without changing the oil filter.

The maximum oil consumption is 1l / 1 thousand km. The approximate amount of lubricant required for its level to occupy the middle position between the upper and lower marks on the dipstick is:

1.5 l for 4ZZ-FE and 1ZR-FE engines;
1.8 l for 1ND-TV motors;
1.7 liters in the case of 1AD-FTV power units.

Toyota Corolla E160, E170 since 2012 release

Model 2014 release

Gasoline motors

Manufacturer's requirements for engine oil for Toyota Corolla:

original motor fluids "Toyota Genuine Motor Oil" or other motor oils of the appropriate quality (possibly with tolerances on the canister);
motor oil viscosity 0w-20, 5w-30, 10w-30 and lubrication class SL "Energy Conserving" or SM "Energy Conserving";
ILSAC universal motor fluid with a viscosity of 15w-40;
universal motor fluids of class SL, SN, SM according to API classification.

Viscosity selection is performed using scheme 11.

Scheme 11. Recommended viscosity of motor fluid.

According to scheme 11, it is preferable to use 0w-20 motor oils, in their absence it is permissible to fill in 0w-30, which must be changed to 0w-20 upon subsequent replacement. When using 10w-30 or 15w-40 oils in cold weather (temperatures below -18 0 C), fuel consumption may increase and the engine start may deteriorate.

Diesel engines

Engine fluid requirements:

Toyota Genuine Motor Oil branded motor oils or alternative lubricants of the appropriate quality;
grease class C2 according to ACEA.

When choosing viscosity, use scheme 12.

Scheme 12. dependence of the viscosity of the motor fluid on the air temperature.

According to scheme 12, it is preferable to use 0w-30 motor oils, they help to reduce fuel consumption. In the absence of the specified auto oil, it is permissible to pour 5w-30 lubricants, which, upon subsequent replacement, are changed to 0w-30.

Refueling volumes

The volumes required when changing the car oil:

Motors 1NR-FE:

3.4 liters, including the filter;
3.2 liters without oil filter.

Engines 1ZR-FE, 2ZR-FE and 1ZR-FAE:

4.2 l with filter;
3.9 liters without oil filter.

Auto engines 1ND-TV (for Turkey):

3.9 l with oil filter;
3.5 l without filter;

1ND-TV (except Turkey):

3.7 l with oil filter;
3.3 liters without oil filter.

Conclusion

The consumption of motor lubricant in the engine depends on the quality and viscosity of the lubricant. Recommended engine oil for Toyota Corolla has optimal parameters, provides protection of the motor from overheating in the heat and start-up of the power unit without warming up in cold weather. When operating a car, keep in mind that even the recommended car oil can liquefy, so when frequent use car in extreme conditions should be changed more frequently lubricating fluid than specified in the regulations.

The oil filter and oil are changed every 10,000 km, the replacement date may vary slightly depending on the specific operating conditions. This article provides an example of an oil change for Toyota Corolla cars since 2010. From 2006 - 2010, all operations are similar, except that the design uses a classic oil filter in a metal case instead of a filter insert.

To remove and install the oil filter on a Toyota Corolla, you will need the following tool: a 14 mm socket, a wrench for the oil insert cap code 09228-06501 or a chain or soft oil filter remover with strap tape, a funnel, a screwdriver.

Using a screwdriver, remove the rubber plugs from their seats in the engine protection

Unscrew the oil filler plug in the engine compartment

I unscrew the plug from the crankcase with a 14 mm wrench to drain the oil

We drain the oil into a volume of at least 4.2 liters, this is exactly the volume of oil in the crankcase of the Toyota Corolla 2006-2012 engine, the year of manufacture, the engine is 1.6 liters 1 ZR-FE

Unscrew the cap with a special key 09228-06501. The cap can also be unscrewed with a strap wrench or chain wrench. When unscrewing with a chain wrench, it is necessary to wrap the chain in a strip of rag so as not to damage or leave marks on the plastic cap. Filmed just like that.

We take out the cap with the filter element.

Removing the filter element

Replaces the installed original filter element Toyota code 04152-37010 installed analog Knecht (Mahle Filter) OX 416 D1

Place of landing of the filter insert. It is worth noting that the metal cartridge springs, ensuring that the replacement cartridge is pressed against the sealing surfaces.

View of the cap of the filter insert. Inscriptions: twist clockwise, unscrew counterclockwise. tightening torque 25 N * m, that is, 2.55 kg per meter.

Six threads, i.e. six turns until fully tightened. The cap has a rubber sealing ring (circle section). If the ring is good condition without scoring, gouges, then there is not much point in changing it. A new ring is included with the new filter. Replace if necessary, lubricate with oil.

Install a new filter element.

We pour oil. Oil is absorbed into the porous surface, so after absorbing it, add more oil. This is necessary so that in the first seconds of starting the engine, the oil immediately begins to flow to the valves through the cardboard, and does not linger in the chamber of the replaceable insert.

We install the cap with the filter insert in place.

Pay attention to the location of the cap. He must trust himself to his position before the withdrawal. There are risks on the cap between which there should be a pointer - it can be seen in the photo opposite the number 10 on the tape measure.

Pour oil through the oil filler neck. We close the cork.

The oil must be between the level marks. After the first drive, check the engine oil level, top up if necessary.
I also wanted to separately highlight the option of an express oil change in a car engine, more detailed information, about the technology of operations and the features of such a replacement, you can find in the article "

Spare parts that are mentioned in the article, as well as any other spare parts for Toyota Corolla, you can order and buy at low prices in the "OK-AUTO" store Buy the necessary parts for your Corolla in our store, you will receive them at a low price, in minimum terms and with delivery.

One of the most frequently asked and discussed questions. What kind of oil to pour into the engine and gearbox of your car. Someone bought a car from their hands, and forgot to ask the previous owner what kind of oil was poured, or the brand of oil is known, but there are doubts about whether it was chosen correctly. Another option, the desire to pick up oil with necessary characteristics but at a lower price.

In the article we will try to answer which oil to use for replacement in the engine and gearbox Toyota car Corolla. The two most popular on this moment Corolla modifications X (E150) production period from 2006 to 2013, and Corolla IX (E120/130) production from 2000 to 2007.

How often do you need to change the oil in a Toyota Corolla?

The engine oil must be changed at every service. Recommended intermittent interval Maintenance Toyota car
every 10,000 km or every 12 months, whichever comes first.

How much oil is needed for the engine?

According to the passport, 1.4 and 1.6 engines with a filter change include 4.2 liters of oil. This is the volume that is filled at the factory in empty engine. With scheduled maintenance, 4 liters should be enough, since the oil is not completely drained. Nevertheless, it is better to buy a 5 liter canister
or 4+1 litre, topping up may be required.

Engine oil Corolla X (E150)

Engine oil that can be used in the most common engines: 1.6 l with a capacity of 124 l / s marking - 1ZR-FE.
The 1.4L 4ZZ-FE engine remains unchanged from the previous generation and will be considered when selecting Corolla IX aphid oil.
Toyota recommends using genuine lubricants. Toyota materials Genuine Motor Oil (who would doubt) or similar. The viscosity of the oil used is selected depending on the operating conditions.
Preference is given to Toyota 0W-20 oil, can also be used SAE oils: 0W-30, 5W-20, 5W-30.

Genuine Toyota engine oils

vendor code	Name	Standards	Price*	in detail
08880-10505	Toyota SN 0W-20 (4l)	API: SN \| ILSAC: GF-5
08880-10506	Toyota SN 0W-20 (1L)	API: SN \| ILSAC: GF-5
08880-83265	Toyota Formula XS 0W-20 (5L)	API: SM \| ILSAC: GF-5
08880-83265	Toyota Formula XS 0W-20 (1L)	API: SM \| ILSAC: GF-5
08880-10605	Toyota SN 5W-20 (4l)	API: SN \| ILSAC: GF-5
08880-10606	Toyota SN 5W-20 (1l)	API: SN \| ILSAC: GF-5
08880-80365	Toyota 0W-30 (5l)	API: SL/CF \| ACEA: A3/B3/B4
08880-80366	Toyota 0W-30 (1l)	API: SL/CF \| ACEA: A3/B3/B4
08880-80845	Toyota 5W-30 (5l)	API: SL \| ACEA: A1/B1, A5/B5
08880-80846	Toyota 5W-30 (1l)	API: SL \| ACEA: A1/B1, A5/B5
08880-10705	Toyota SN 5W-30 (4l)	API: SN \| ILSAC: GF-5
08880-10706	Toyota SN 5W-30 (1l)	API: SN \| ILSAC: GF-5

The table shows that it is advisable to use one of two oils:

1. Toyota SN 0W-20 because the manufacturer prefers it

2. Toyota SN 5W-30, the most affordable and meets all requirements.

Both oils are sold in metal cans, which is additional protection from fakes. The lack of oil can be attributed to low base number, this suggests that the oil weakly resists oxidation and quickly loses its properties. This process is accelerated when low quality fuel is used. Oil develops its resource by 5-6 thousand kilometers.

Except original oils, no one forbids the use of oils from other manufacturers that meet Toyota requirements.

Name	Standards	Price *	in detail
Mobil 1X1 5W-30	API: SN \| ILSAC GF-5	590
	API: SL \| ACEA A5/B5	380
Castrol Magnatec 5W-20 Start/Stop	API: SN \| ILSAC GF-5	550	watch >>
Castrol Magnatec 5W-30 C3	API: SN \| ILSAC GF-5	480	watch >>
Castrol Magnatec 5W-30AP	API: SN \| ILSAC GF-5	500
	API: SN \| ACEA: C2/C3	600	watch >>
	API: SN/CF \| ACEA: A3/B4	420
Valvoline SynPower 5W-30		425	watch >>
Motul ECO-lite 0W-20	API: SN/CF \| ILCAC: GF-5	700
Motul ECO-lite 5W-30	API: SN/CF \| ILCAC: GF-5	630	watch >>
Liqui Moly Special Tec 0W-20	API: SN/CF \| ACEA: C3	625	watch >>
	API: SN \| ACEA: A3/B4	475	watch >>

The choice of oil is large and everyone will be able to choose one that will suit their price, quality and availability.

Engine oil Corolla IX (E120)

Name	Standards	Price *	Availability	in detail
Mobil 1X1 5W-30	API: SN/SM \| ILSAC GF-5	590	Yes
Mobil Super 3000 Formula Fe 5W-30	ACEA: A5/B5	380	Yes
Castrol Magnatec 5W-30 C3		480	Yes	watch >>
Castrol Magnatec 5W-30AP		500	Yes	watch >>
Shell Helix Ultra ECT C2/C3 0W-30	API: SN \| ACEA: C2/C3	600	Yes	watch >>
Shell Helix HX8 Synthetic 5W-30	API: SN/CF \| ACEA: A3/B4	420	Yes
Valvoline SynPower 5W-30		425	Yes	watch >>
Liqui Moly Optimal Synth 5W-30	API: SN \| ACEA: A3/B4	475	1 day	watch >>
ZIC X7LS 5W-30	API: SN/CF \| ACEA: C3	320	Yes	watch >>
ZIC X9 FE 5W-30	ACEA: A1/B1, A5/B5	425	Yes	watch >>
Lukoil Lux 5W-30			Yes	watch >>

Oil box Toyota Corolla

The oil in the gearbox does not change as often as in the engine. The recommended replacement interval in the manual transmission and the robot is 60,000 km., In the machine 100,000 km.

Oil for robot and manual transmission:

The required volume for replacement is 2.4 liters

original Toyota oil Getriebeoil LV 75W MT

Oil highest quality For mechanical transmissions Toyota

Volume: 1 liter

Delivery: 1 day

Number: 08885-81001

transmission Castrol oil Syntrans B 75W

Oil for manual gearboxes providing fuel economy and smooth switching gears at low temperature

Volume: 1 liter

Delivery: 1 day

Oil for automatic transmission:

The required volume for replacement depends on the method and ranges from 7 to 11 liters

original oil for Toyota automatic transmission ATF Type T-IV

Oil provides reliable performance and smooth shifting automatic transmission V various modes operation over a wide temperature range. Protects the mechanism from wear and corrosion.

Volume: 4 liters

Delivery: 1 day

Number: 08886-81015

highly efficient synthetic oil for automatic transmissions

Volume: 1 liter

In stock

Approval: Toyota T-IV

Toyota Corolla engine oil change

* The price is indicated for one liter and is for informational purposes only, for cost comparison different oils between themselves. current price, request by phone, through the form feedback or chat on the site