High-quality repair and diagnostics of cars and commercial vehicles. We work with individuals and organizations. We carry out diagnostics of the brake system and running gear, engine repair, car maintenance, bodywork and painting. Auto electricians with many years of experience work in the state. Motorists specialize in certain brands of cars.
Car service on Piskarevka - Energetikov avenue, house 59.
Located next to the metro station "Ploshchad Lenina". Covers car repairs in Kalininsky, Vyborgsky and Primorsky districts of St. Petersburg. Performs all work on the chassis, engine, suspension and installation of additional equipment. A new wheel alignment stand for cars and minibuses has been installed. Doesn't do car painting or body work. It is convenient to get from the metro stations "Ozerki", "Prospect of Enlightenment", "Specific" and "Pionerskaya". There is a cozy cafe in the building. To the ring road - 10 minutes.
Car service in Kupchino - st. Dimitrova, house 1
Initially, the service was engaged only in body repair and painting. Subsequently, several buildings were built in which new two and four post lifts were installed. Large car wash for cars and commercial vehicles. Separate workshop for diagnostics of diesel and petrol injectors. Steering racks, turbines and auto electrics are being repaired. The repair of mechanical and automatic transmissions is widely represented. Within walking distance from the metro station "Zvezdnaya", "Kupchino", "Obukhovo". Suitable for residents of the Frunzensky and Kirovsky districts.
18-11-2013, 18:21Oil change in hyundai porter,
a very difficult matter. With this problem, it is better to contact the auto repair shop, where you can immediately buy spare partshyundai porter. And yet, if you yourself decide to change the oil, be prepared for the fact that you can get pretty dirty.
An oil change, unlike a level check, takes place when the mileage is about fifteen thousand kilometers, or when it is planned after a few months. The most reliable way to change the oil is when the car is well warmed up.
The first thing to do is raise the front of your car with a ramp. It is not recommended to install the machine on a jack, it may break. The height of the lift must be at least half a meter. Make sure that the machine is firmly fixed and does not dangle in different directions. The surface of the road must be flat, without a slope. To make it comfortable to lie under the car, you need to lay something on the ground. The car must be on the handbrake and have bricks or "shoes" under the wheels. No need to be lazy to check stability, safety is paramount.
Before climbing under the car, you need to prepare the necessary tools. An oil filter wrench can be purchased from parts stores. It is better to buy a complete set of spare parts. Pre-prepare a container for old oil.
Find the oil pan, unscrew the plug from the crankcase using tools. Let the oil drain completely into the container prepared in advance. The main thing is to be careful, in a warm car, the oil will be very hot.
After carefully removing the filter, you need to throw it away, preferably in a plastic bag. Make sure that the oil drips into the finished container. To avoid oil leakage, tighten the crankcase plug as tightly as possible, then install a new filter in place of the old one. Lubricate the rubber gasket near the threads on the filter with oil.
Now you can get out from under the car, open the hood. We unscrew the cover from the oil block, fill in new oil, about five liters, the volume depends on the engine. After that, you need to firmly tighten the cover of the block.
After making sure that there are no oil leaks under the car, we first start the car engine. If the oil is still leaking, it is worth contacting an auto mechanic. At the end of work, you need to check the oil level in the engine and you can close the hood, lower the car to a horizontal position.
Hyundai Porter- light commercial vehicles (up to 1250 kg). Thanks to excellent handling, maneuverability on city streets and a comfortable loading height, they have firmly occupied a niche between small trucks and light vans. The model is actively used on Russian roads. If your fleet urgently needs Porter repairs, the specialists of the ITA Motors technical center are ready to return the car to service in a short time.
You can consult with a specialist and sign up for the diagnosis and repair of Hyundai Porter / H-100 in Moscow by phone:
Basic maintenance work (TO)
Hyundai Porter / H-100
- replacement of engine oil and oil filter;
- checking the levels of working fluids;
- checking the brake system (pads, discs);
- replacement of fuel and air filters;
- inspection of electrical equipment;
- checking the rear and front suspension;
- steering check;
- checking lighting and sound signal;
- external inspection of the car.
Our specialists will promptly carry out a complete check of all vehicle systems with entering data into the service book.
Maintenance cost
Hyundai Porter / H-100
Additional services for Hyundai Porter / H-100
We have been working with Hyundai Porter / H-100 since 2010. During this time, we have serviced more than 5,000 Hyundai Porter / H-100 vehicles. The experience we have gained is enormous. We know all the advantages, disadvantages and "childhood diseases" of the Hyundai Porter / H-100. The time spent on diagnostics and car repairs is minimal. Our prices for maintenance and repairs are below the average market in Moscow. Don't take risks! Trust your car to professionals.
A complete check of the technical condition is necessary if the Check Engine icon lights up on the dashboard. It is also recommended to carry out it if the fuel or oil consumption has increased, if extraneous noises appear, the engine is difficult to start.
Timely maintenance of the car is a guarantee of its long serviceable technical condition. The technical center "ITA Motors" along with the provision of repair services for Hyundai Porter is ready to perform all the necessary maintenance work for commercial vehicles. Maintenance is recommended every 10,000 km.
Andrey Ryzhenkov, CEO
The oil is changed by draining it through the drain hole in the oil pan. In some car services, replacement is carried out by means of vacuum suction. This method is called express replacement and takes less time because it does not require a lift and there is no need to remove the crankcase.
However, a Hyundai express oil change should be alternated with the traditional method, because during a vacuum change, used oil remains in the engine, and sediment collects at the bottom of the oil pan that cannot be removed by vacuum. After an express change, a shorter service interval is recommended, that is, the next time you need to change the oil earlier than usual.
Why is an oil change necessary?
Regular hyundai oil change is a prerequisite for the correct operation of the engine. The oil creates a lubricating film at the points of contact of the rubbing engine parts and, thereby, reduces the friction force. Even short-term operation of the engine without oil can damage the engine.
Secondary functions of motor oils: cleaning the internal parts of the engine from soot and varnish deposits, removing excess heat from the contact zone of rubbing parts. Oil also contributes to the necessary transmission of forces in the engine nodes.
How often should the engine oil be changed?
According to the manufacturer's regulations, the oil in the Hyundai engine of a new car should be changed every fifteen to twenty thousand kilometers. However, when calculating the service interval, you need to make an adjustment for operating conditions. For the development of an oil resource, it is not even the mileage itself that matters, but the so-called engine hours, the time the engine is running. In urban traffic jams, even a very good oil loses the entire set of additives after ten thousand kilometers, and the engine runs on a dirty “base” that is murderous for it. Therefore, it is more correct to change the oil every seven and a half - eight thousand kilometers. For a used car, especially one that has interruptions in operation, for example, not used in winter, the interval between oil changes should be five to six thousand kilometers.
The frequency of oil changes is influenced by driving style and difficult terrain, such as mountainous terrain, and driving with a trailer. All these factors give additional loads to the engine, the oil performs the functions of their neutralization and is worked out much faster.
To determine the brand of oil that is optimal for a particular car, Korean manufacturers announce a tender for oil suppliers. Testing of the products of all participants is carried out, the purpose of which is to determine which of the oils the engine runs with the least losses. This brand of oil becomes officially recommended by the Hyundai automaker.
Dealers have this information, and in a company car service, the masters always know what kind of oil to fill in your car. If the oil is not changed at the dealer, then when choosing it, you need to focus on the mileage of the car and its operating conditions.
Varieties of motor oils
The most important parameter of a car oil is viscosity, that is, its ability to remain on the surfaces of engine parts during operation, while maintaining fluidity not only on Hyundai, but on any car.
There is a classification of oils according to their viscosity at various operating temperatures, developed by the Association of American Automotive Engineers (SAE). If the letter W (winter) is present in the marking, this means that the oil is intended for use in winter conditions. The most viscous - summer oils:
SAE 20 (30, 40, 50, 60) - numbers indicate viscosity. The higher the number, the more viscous the oil is.
Winter oils - SAE 0 W (5W, 10W, 15W, 20W)
The third group of oils is all-weather. In their marking, two viscosity numbers are indicated. The numbers before the letter W indicate the viscosity at low temperatures, and after the letter W - at high temperatures. Now all-weather oils are the most demanded group of oils. They also have their own differences and features.
Oils of zero and fifth grades are optimal for use in winter urban conditions. For used Hyundai cars, a thicker oil is needed, especially in summer when the engine is at its hottest. For half-life engines, SAE 15W-40 or 20W-40 oil is suitable. If the mileage and wear are greater, it makes sense to choose an even more viscous oil: 15W-50, 20W-50.
"Big" oil change stuff
It is advisable to buy an original oil filter. It is not at all expensive and at the same time it has been tested and selected according to the throughput of the recommended Hyundai oil. If you use a non-original filter, its throughput may be less than necessary, and insufficient oil will enter the engine. In addition to the filter, you need a gasket for the drain plug in the engine pan. The gasket will protect the threads and help prolong the life of the pallet.
By regularly changing the oil, using the recommended grades that correspond to the mileage and operating conditions, as well as using original filters, you will ensure stable operation of the Hyundai engine.
Timely oil change in the Hyundai Porter engine allows you to keep the car in working order for a long time. In the material below, you can find out when a car repair is necessary and under what circumstances technical work is performed to replace the lubricant.
When is an oil change required?
Every car, regardless of brand and technical characteristics, needs high-quality repairs and diagnostic maintenance. The oil change schedule is specified in the technical passport of the car from the manufacturer. If there is no data provided, it is necessary to check the lubrication depending on the performance indicators.
Signs of a need for replacement:
- High fuel and oil consumption;
- The engine system does not cope with its task. Often there are failures at idle;
- Noise, extraneous sounds, clicks in the engine;
- Power drop of the power unit.
If one of the signs is found, it is necessary to correct the problem. With the necessary algorithm of actions and the minimum number of tools, this procedure can be carried out even by a novice motorist.
What kind of oil to fill?
The choice of lubricant should be based on the regulations that are prescribed in the technical passport of the car. Both mineral and synthetic oils are suitable for replacement:
- Mineral or oil. Pretty viscous. They quickly lose technical qualities. For old-style cars - the best option;
- Synthetic oil. The composition of the product is better than that of the previous substance. Does not lose properties at low temperatures, is stable and has excellent viscosity and fluidity. The long service life is due to the fact that the components do not disintegrate during operation.
If you don’t want to buy a not very high-quality mineral lubricant, and a synthetic one hits your pocket hard. It is best to opt for semi-synthetics: a mixture of high-quality mineral substances with synthetic components.
Oil change steps in a Hyundai Porter engine
Preparation for work is based on an express inspection of the car and diagnostics of spare parts. It is important to establish the degree of complexity of the breakdown and find a solution to eliminate it. Tools are used to solve the problem. At the end, a performance check is mandatory.
Necessary tools for changing the lubricant in the engine:
- container for draining the old substance;
- funnel;
- key;
- set of "heads";
- flyover or pit.
When changing the oil in a Hyundai Porter engine with your own hands, it is necessary to drain the old fluid, fill in a new one and, if necessary, flush the engine.
How to drain oil?
Sequencing:
- Install the machine on the territory where it will be comfortable to drain the old liquid. It is best to use a repair pit or overpass to facilitate access to the power unit;
- Stop the engine;
- Carefully unscrew the drain plug, as the engine may be warm and drain the old substance. This process may take some time as the viscous grease flows out slowly.
If you follow the procedure correctly, then approximately 3-4% of the waste substance will remain at the bottom of the engine.
How to clean the engine?
It is not necessary to clean the engine. Depends on the degree of contamination, the quality of the old mining and the presence of unknown impurities. If the exhaust was with many additional components, it is better to clean the engine with a flush mixture. If this is not done, the remaining particles of the old oil will negatively contact the components of the new one.
Step-by-step instruction:
- After draining the old fluid, it is necessary to change the oil filter;
- Pour in the flushing agent;
- Start the engine and warm up to operating temperature;
- Drain the wash solution.
Checking the filter affects the quality of the initial result of an oil change. If the filter is dirty, the oil mixture may continue to flow.
How to fill in new oil?
Procedure:
- Pour new oil into the engine using a funnel;
- During the filling period, you need to monitor the volume of liquid with an oil dipstick;
- Initially, it is necessary to fill in 75% of the volume of oil from the norm and warm up the engine;
- Then add the rest.
At the end of the procedure, the engine is warmed up at idle. Next, the fluid level is checked again.
Replacement frequency
Factors affecting the frequency of oil changes:
- The nature of driving;
- Intensity of exploitation;
- Engine condition;
- Seasonality.
The duration of use depends on the quality of the products that are poured into the motor. You need to change the oil in the engine every 8-10 thousand kilometers or when there are signs of the need for replacement.
