Depending on the method of execution, washing can be done manually, mechanized and combined. Manual washing is done with a hose with a hose or a brush. When washing with a medium jet or high pressure the hose must have a washing gun that allows you to adjust the shape of the jet. For washing the lower, more polluted parts of the car, a directed, dagger jet is used; for washing the upper parts, a fan-shaped, cone-shaped jet is used.
For mechanized washing, special washing installations are used, which, depending on the control method, can be automatic or manually operated.
Combined washing is used in the case when one part of the car is washed manually, and the other - mechanized.
For car washing, washing installations are used, which can be stationary jet-brush with a carriage moving around the car and moving the car, and stationary brushless with a carriage moving around the car and moving the car.
Stationary jet-brush units are equipped with brushes with an oscillating suspension system. Most widespread for washing cars received mobile washing installations. They are a U-shaped arch, moving with the help of an electric drive along the rails laid on the washing path. Two vertical and one horizontal rotary brushes with electric drives, brushes for washing wheel rims and a device for drying (blowing) the car after washing are mounted on the portal. The brushes are wetted through a system of pipes with nozzles. Most washers have an additional spray arch that provides pre-wetting and rinsing. The washing sequence is controlled by a computer.
The technological process with the use of a modern washing plant consists of the following operations: general washing of the car with high-pressure water; spraying detergent foam with chemical elements to soften oil and grease deposits; two-pass washing with floating brushes that go around the contours of the car, with simultaneous washing of the bottom of the car; spraying wax (polishes); two-pass forced drying.
The disadvantage of brush wash systems is the damage to the surface of the car as a result of the action of the brushes. The brushes of the unit must be periodically cleaned of accumulated dirt, which is not always done. To prevent damage to the surface on some models of washing installations, rag strips are used in brushes instead of lint.
The performance of brush units is from 30 to 40 vehicles per hour at an operating pressure of 0.4-0.6 MPa. Washing one car consumes up to 900 liters of water.
For washing the body and the lower part of the car, stationary brushless washing installations are used. They do not damage the antennas and other external equipment of the car, and also do not leave scratches on paint coatings. The performance of the units is from 20 to 30 vehicles per hour at an operating pressure of 0.8-1.2 MPa. Water consumption for washing one car - 1200-1800 liters.
Due to the increased demands of car owners for the quality of washing, as well as the high cost of brush washers, small-sized mobile high-pressure washers are increasingly being used. They can have a pump drive, both from an electric motor and from an engine. internal combustion. Washing is carried out with hot or cold water at a pressure of 3-15 MPa.
At present, given the high cost of water, washing plants are equipped with water recycling systems, and biological water purification systems are also used.
To remove moisture from the car after washing, use special installations, which remove moisture with the help of air heated to 40-50 ° at a pressure of 0.2-0.4 MPa, infrared rays, etc. Moisture from the engine and ignition system devices is removed after washing compressed air using a special gun at a pressure of 1 MPa. The outer surfaces of the cab, hood, lining, headlights, fenders, sidelights are wiped with a cleaning material, and the polished surface of the body is wiped with a bike or suede.
Portable and mobile vacuum cleaners are used to clean the car interior.
Handling equipment
In order to have convenient access to all components and assemblies of the car, various lifts have become widespread at car service enterprises. They can be equipped with electromechanical, hydraulic and pneumatic drives.
Two-post, four-post, scissor and plunger lifts, as well as tippers are used for maintenance and repair of passenger cars. When servicing a car on inspection ditches, ditch lifts can be used.
Most often, floor two-column electromechanical lifts with a carrying capacity of 2-3 tons are used. Such a lift consists of two box-shaped racks and a cross member. In each rack there is a lead screw, along which the load-lifting nut moves. A carriage with pivotally mounted sliding pickups is attached to the nut. The load-lifting lead screws are driven by an electric motor through a gearbox. Rotation to another screw is transmitted using a chain drive installed inside the cross member.
The lift is controlled by a push button switch. The lifting height is 1.8-2.0 m, the lifting time is 50-60 s. In the extreme upper and lower positions, the carriage is stopped by the limit switch of the electric motor. The lift is installed without a special foundation on a flat surface and is attached to the floor with anchor bolts.
Tippers are used when washing the bottom of the car before maintenance or repair, before welding work, anti-corrosion coatings. good access to the bottom and axes of the car is preserved in the case of using single-column hydraulic lifts. The car can be raised to a small height using a hydraulic, pneumohydraulic or pneumatic jack.
Inside the car service company, lifting the car and moving its units is carried out using electric hoists, hoists, mobile cranes, cargo trolleys, crane beams and other equipment.
Other types of equipment
For production technical inspections and car repair, diagnostic tools are used to detect defects without disassembling the car. The technical condition of the components, assemblies and devices of the car is established according to diagnostic parameters, individual values of which indicate a violation of the operating mode, adjustments, interfaces of parts of devices and mechanisms. Diagnosis is one of the technological elements of technical inspection.
The equipment used for diagnostics can be portable, stationary and mobile. Stationary equipment includes stands of various designs and types, on which the condition is checked. brake system, suspension, traction, steering angles, wheel balancing, etc. Mobile equipment includes a set of special devices that are used to diagnose engine systems and mechanisms in need of repair, for example, motor testers, as well as devices for determining the composition of exhaust gases, devices for checking headlights, dimensions and turns, stands for balancing wheels without removing them from car.
There are many small-sized devices for checking the performance of aggregates, components and systems of a car, for example, scanners, compressors and others, which are used as portable equipment.
To help determine the type and severity of faults and better service car in small auto repair shops use the following devices.
Ohmmeter, which serves to check the resistance of the ignition coil, as well as to check the elements of the electronic injection system.
Voltmeter, which serves to check the condition of the contacts of the breaker, check the electrical network, the condition of the battery and the voltage regulator.
Ammeter used to check the electronic ignition system, as well as the battery charge.
Hydrometer used to check the density of the electrolyte in the battery and the coolant in the radiator.
torque wrench. Used to determine the tightening torque of fasteners, as well as spark plugs.
Revolution counter. Used for speed control idle move carburetor and diagnostics fuel pump.
Hourly optimeter. Used to determine the runout of the wheel, check the clearance in the wheel bearings.
Manometers for various pressures. Used to check the fuel pump, tires, engine oil pressure, brake pressure.
probes. They are used to check the gaps in the valves, between the contacts of the breaker, check the candles and the generator.
Painting and drying chambers. Painting and drying chambers of various designs are used for painting a car and subsequent drying. The chamber is a collapsible structure made of insulated panels. In order to prevent dust from falling on the surface to be painted and in order to ensure sanitary and hygienic working conditions during painting, the chamber is equipped with supply and exhaust ventilation, which is necessary to remove the sprayed paint and the solvent included in its composition.
Maintenance work and current repairs can be produced by mechanized, mechanized-manual and manual methods. In the mechanized method, metalworking machines, forging and pressing equipment, conveyors for moving cars, electric hoists, electric hoists, beam cranes, stacker cranes, mechanized hoists for hanging cars, diagnostic stands, microprocessor technology, etc. are used.
In the case of using a mechanized-manual method of performing work, the most labor-intensive operations are mechanized, in which the auto mechanic uses various mechanized tools and equipment, for example, a manual (hose) washer, oil dispensing equipment, electric and pneumatic wrenches, instrumentation, air dispensing columns, pneumatic spray guns, as well as other tools, devices and equipment with electric, hydraulic, pneumatic and other drives and driven by a special source of energy. At the same time, a significant share of manual labor can also be retained here, when the employee delivers the tool to the place of operations, its adjustment and connection.
With the manual method, work is performed using the simplest tools, as well as devices and devices: pullers (Fig. 1), jacks, cranes and other equipment that does not have a drive from a special energy source.
Rice. 1.
Tool 9680-2445 for removal and installation piston rings:
1 - handle; 2 - ledges; 3 - stops; 4 - grips
The quality of repair and preventive maintenance, and, first of all, car diagnostics, is significantly improved when using microprocessor technology, which increases the accuracy of parameter calculation, visual and graphic clarity of the results reproduction, which favorably affects technical condition car. At the same time, traffic safety is also increased, since the diagnosis of malfunctions before leaving the car serves as a guarantee that technical failures will not occur during operation. Careful and quality service engine and its systems with the help of microprocessor devices reduces the toxicity of exhaust gases, which is especially important when operating a car in urban conditions.
The condition for the correct diagnosis and repair of vehicle malfunctions is a well-chosen tool and accessories that are stored on racks or in tool cabinets, portable boxes and mobile carts. At various workplaces, workbenches are used, consisting of a desktop, on which, as a rule, a vice and other devices are installed. Tools are stored in the drawers of the workbench.
In the toolbox general purpose to perform technical repairs of a car, it may include: pullers of various designs, which are used for disassembly and assembly of hard-to-remove and mounted parts; metalwork hammer with a wooden handle; screwdrivers: slotted, cross-shaped, with a nut welded to the blade, with a fork, a screwdriver-tip that fits into a socket wrench and some other types of screwdrivers of various sizes; candle key; adjustable wrench; socket wrenches 6-17 mm; special sliding universal pliers; a set of probes and barbs; files different types; socket wrench for unscrewing the wheel nuts; battery charger; pliers with insulating covers; pliers universal; sector scissors; monter's knife; chisels; hacksaw for metal; scrapers; metal-cutting tools (drills, countersinks, scrapers, reamers); measuring tool; drilling machines, etc.
Auto mechanic set NIA-1 allows for assembly and dismantling works in progress Maintenance or when repairing vehicles domestic and foreign production. A well-thought-out combination of the tool included in the set, its quality and low price make NIA-1 an excellent alternative to foreign tool kits.
In the trunk of any motorist there is a tool for repair work. Some have several wrenches, a hammer, a couple of screwdrivers and pliers. Others have a full-fledged set of fitting and assembly tools, such as a set of auto mechanic NIA-1.
Auto mechanic's kit NIA-1 allows you to perform assembly and disassembly work in the process of maintenance or repair of vehicles of domestic and foreign production. A thoughtful combination of the tool included in the set, its quality and low price make NIA-1 an excellent alternative to foreign tool sets.
The auto mechanic's kit includes a wide range of combination wrenches that combine the functions of open-end and ring wrenches. Availability of this type keys allows you to reduce the total number of tools in the set and reduce the weight of the set itself. It also gives one undoubted advantage: if, when working with an open-end wrench, you need a box of the same size, then you just have to turn the key the other way - and not look for the right one in your tool bag!
The NIA-1 tool set is also equipped with socket heads from 8 to 24 in size. contact with him throughout his height. This prevents "rounding" of the edges of the fastener.
The tool included in the set is certified (if necessary, relevant documentation is provided).
Set composition
| 1. | Combined wrench 8x8 | 1 PC. |
| 2. | Combined wrench 10x10 | 1 PC. |
| 3. | Combined wrench 12x12 | 1 PC. |
| 4. | Combined wrench 13x13 | 1 PC. |
| 5. | Combined wrench 14x14 | 1 PC. |
| 6. | Combined wrench 17x17 | 1 PC. |
| 7. | Combined wrench 19x19 | 1 PC. |
| 8. | Combined wrench 22x22 | 1 PC. |
| 9. | Combination wrench 24x24 | 1 PC. |
| 10. | Socket head 8 | 1 PC. |
| 11. | Socket head 10 | 1 PC. |
| 12. | Socket head 11 | 1 PC. |
| 13. | Socket head 12 | 1 PC. |
| 14. | Socket head 13 | 1 PC. |
| 15. | Socket head 14 | 1 PC. |
| 16. | Socket head 15 | 1 PC. |
| 17. | Socket head 17 | 1 PC. |
| 18. | Socket head 19 | 1 PC. |
| 19. | Socket head 22 | 1 PC. |
| 20. | Socket head 24 | 1 PC. |
| 21. | Candle head "16" | 1 PC. |
| 22. | Candle head "21" | 1 PC. |
| 23. | Hinge | 1 PC. |
| 24. | Extension, 250 mm | 1 PC. |
| 25. | ratchet wrench | 1 PC. |
| 26. | Key with connection large square, 300 mm | 1 PC. |
| 27. | Slotted screwdriver 8.0x150 | 1 PC. |
| 28. | Slotted screwdriver 6.0x150 | 1 PC. |
| 29. | Phillips screwdriver №2х100 mm | 1 PC. |
| 30. | Phillips screwdriver №3х150 mm | 1 PC. |
| 31. | Bench chisel 160 mm | 1 PC. |
| 32. | Hammer 500 g | 1 PC. |
| 33. | Combination pliers 180 mm | 1 PC. |
| 34. | Side cutters 180 mm | 1 PC. |
| 35. | Adjustable pliers 250 mm | 1 PC. |
| 36. | PVC knitted gloves | 1 PC. |
| 37. | Ballpoint pen | 1 PC. |
| 38. | Notebook | 1 PC. |
| 39. | Bag | 1 PC. |
Passport to the NIA-1 auto mechanic tool kit
The ratchet wrench will help the auto mechanic work in tight spaces. Due to the presence of a ratchet in the design of the key, there is no need to rearrange it when unscrewing the fasteners.
Set of tools NIA-1 it is also equipped with socket heads from 8 to 24 in size. contact with him throughout his height. This prevents "rounding" of the edges of the fastener.
In addition to sockets, the kit includes standard spark plug heads (16 and 21 mm), which allow you to quickly and effortlessly replace spark plugs in gasoline engines.
The rest of the tool included in the mechanic's kit helps with disassembly and assembly work, and gloves protect the mechanic's hands from dirt and damage.
All tools are packaged in a durable bag that is easy to carry and takes up little space in the trunk of a car enthusiast. The tool is made of high quality materials, providing for its frequent use and high loads during operation.
Characteristics
Payment
Cash paymentDelivery
Pickup from the warehouse
Mon-Fri: from 10:00 to 18:00
Pickup free.
Up to 30 thousand rubles - from 500 rubles;
From 30 t. rub. - for free.
Cash payment
You can pay in cash with the courier upon delivery of products in Moscow and the Moscow region.
Bank transfer (for legal entities)After placing an order, send an email [email protected] site order number and your details of the organization.
Bank account payment (for individuals)You can pay for the order in any commercial bank.
After placing an order, send an email [email protected] website order number and full name with contact details, we will issue you an invoice for payment.
When paying for and receiving products from a warehouse or by courier, inform us in advance about the desire to pay by credit card.
Pickup from the warehouse
Pickup from the warehouse is possible during its opening hours:
Mon-Fri: from 10:00 to 18:00
Pickup free.
Delivery of small-sized cargo in Moscow within the Moscow Ring Road:
Up to 30 thousand rubles - from 500 rubles;
From 30 t. rub. - for free.
Delivery of small-sized cargo in Moscow in the Moscow region - individually.
Delivery bulky cargo in Moscow and the Moscow region - individually.
We will certainly coordinate a convenient delivery time with you.
Delivery to the regions of the Russian FederationCarried out by transport companies. We cooperate with all major transport companies.
Choice transport company depends on your wishes and negotiated with each client individually.
The cost of cargo delivery to the terminal of the transport company is free.
At your request, we will send the order through the Federal State Unitary Enterprise Russian Post.
The age of which exceeds 10 years! Regardless of the prestige of the brand and model name, you must be prepared for the fact that you will have to do work that you have never encountered before.
Let's immediately admit the obvious - standard instructions are unlikely to help, but messages from specialized forums and articles on the Internet can be extremely useful, since a large number of people already faced the same problems as you. Consider the most necessary tools, which will definitely be needed, as well as the main preparatory operations.
Car preparation
First of all, you need to realize that you need a reliable lifting mechanism. If you have access to a garage equipped with a special lift, then this greatly simplifies the maintenance process, otherwise you will have to stock up on a set of jacks.
In order to ensure the lifting of the entire car, you will need at least four jacks. The support points are usually marked with small triangles on the thresholds, as well as special metal plates on the bottom. But before you buy jacks, you need to make sure that their load capacity and type of construction are suitable for your car.
The second tool you will come across will be torque wrench which will allow you to remove or put the wheels in place. In addition, you need to stock up on overalls, as well as household gloves, since most parts of an old car, even after washing, are heavily soiled and have oil smudges.
The next point of preliminary preparation is to provide good lighting, which will allow you to continue working even in dark time days. And this applies to both work in the garage and on outdoors, since it is simply impossible to carry out repair work in the engine compartment without a portable spotlight.
Next, you need to organize your workspace in the most rational way in order to have access to all tools and dismantled parts. For these purposes, several durable plastic boxes are ideal, in which primary sorting can be carried out.
In addition, you need to think about marking the removed parts, which will facilitate their subsequent assembly. To do this, you can use special bags with plates on which the name of the unit or unit from which the bolts or parts are removed will be written. Do not rely on your own memory, since a large number of elements or long break at work will nullify all your efforts.
Sources of Information and Help
If possible, you should try to find your vehicle's service manual as it contains the most accurate and detailed information which you will need.
Often you can find different repair manuals in different company workshops, which will allow you to choose the most simple and understandable of the presentation options. A paper version of a factory manual can cost up to $500, so it's a good idea to look for a digital version online.
It should be remembered that no instruction or manual can provide for all possible difficulties and problems, so in the garage you need to have constant access to the Internet in order to look for clues on specialized sites or forums. In the most ideal case, you need to enlist the help of a more experienced friend who can assist you.
Basic Tools
Many things from this list will be somewhat banal, but we hope that the information will be useful to you:
. a set of wrenches, as well as box wrenches with nozzles;
. screwdrivers various forms and sizes;
. pliers and pliers;
. containers for draining waste liquids;
. removal key oil filter;
. extensions and bent collars for socket wrenches;
. electrical tape for sealing any connections;
. adhesive tape, which will help not only to fix a number of elements, but also to secure sharp edges and edges;
. supply of working fluids for your car. By doing different kind work, it may be necessary to add brake or coolant, as well as engine or transmission oil, which will require the availability of certain reserves;
. disposable towels or cat litter to quickly clean up puddles of leaking fluids;
. big hammer;
. wrench with nozzles and a long handle for rusty connections.
You should not save on the quality of the tool, because in the process of performing work, significant efforts may be required, which will either lead to a breakdown of a cheap tool or damage to a car element. It is also worth remembering that some manufacturers use bolts and nuts of a specific shape, so you should clarify the information about their availability in your car in advance and stock up on the appropriate keys.
Specialized tool
Virtually all cars selling for $500 have a lot of damage and a high degree wear, which justifies them low price. When working with them, it may be necessary to rip off rusted fasteners, which will lead to subsequent restoration procedures. For these purposes, a set of dies and taps is ideal, which will allow you to quickly restore threaded connection. In addition, do not forget about a drill with a set of drills that will allow you to drill out a broken bolt stuck in a hole.
In some cases, a hydraulic press may be needed to remove a rusted bushing or guide. In addition, it will be necessary to stock up on special cores of a certain diameter in order to easily perform this procedure.
It is equally important to use for stripping and connecting old wires, as well as replacing them.
And in some cases, you can not do without the help of a second person, especially in such important procedure as a replacement brake fluid. In addition, you will need a set of tubes and small containers in order to properly perform the procedure.
Many car manufacturers recommend using only specialized tools and certified spare parts, however, their cost may be higher than the price of your car, so it is advisable to monitor the market for more affordable alternatives from third-party companies.
When is the best time to seek professional help?
Despite the desire to do something on your own, there are a number of operations that are best left to professionals. For example, assembling an engine, installing a timing belt or chain, balancing wheels. These operations are often impossible to perform qualitatively in garage conditions and mistakes made can lead to costly repairs. You should also not skimp on safety features that can save your life.
Moreover, it even requires professional diagnostics using specialized devices, due to the abundance electronic systems and control units. Such devices are quite expensive and require certain skills in handling, which is why it is better to contact a specialized service with such problems.
You should not try to adjust the operating parameters of the electronics, based only on the subjective feelings of the engine operating modes and superficial knowledge gained the day before. This is a complex painstaking work that requires professionalism.
Thus, having in your arsenal a certain set of tools, as well as instructions and pre-downloaded video tutorials, you can perform basic and repair your car. In the absence of proper experience, it is worth enlisting the support of a more qualified and experienced car enthusiast, and it is better to entrust the most complex and responsible operations to professionals from the service center.
Less and less free space stays under the hood modern car. The manufacturer strives to use every square centimeter of space around the engine. For a car mechanic it is additional problems, as it becomes more and more difficult to get to dismantle some part, there are more and more hard-to-reach places.
Here, I picked up a very interesting list of 19 special professional tools and devices that can help solve this problem.
Of course, some tool may seem very exotic and little used in work, but every auto repairman who is more or less engaged in professional repair cars.
So, let's go in order.
Comfortable bright light
LED lamp, made in the format of a "police baton" with magnetic mounts.
It is very convenient to use when working under the bottom of the car or under the hood. Strong magnets will hold the lantern in place without any problems, and the 200-degree swivel tube can be rotated exactly where you need a bright light. Can work from onboard network, and from your battery.
The ability to switch the brightness more / less and your own accumulator battery allow the lamp to work on its own for up to 8 hours. And as a bonus, it great option garage lighting during a power outage.
Crank for hard-to-reach places
Working under the hood engine compartment, sometimes you have to face the problem of unscrewing and tightening the bolt, especially if it is in a hard-to-reach place and is tightened with a decent moment.
And here such a special wrench operating in ratchet mode can come in handy.
Metal stripping and deburring tool
A very interesting hand-held pneumatic tool, one might say percussion ... Something reminded me of sandblasting, only everything is much simpler.
By connecting it to the compressor without much effort, you can beat off rust, scale after welding or old paint.
The principle of operation is simple - steel needles (options from 12 to 19 needles are possible) at a speed of 4000-4600 beats per minute (depending on the model) will knock out corrosive places to pure iron. It is especially useful when used in hard-to-reach places, where not to reach korshchetka.
When working with this tool, you should use the tools personal protection: thick gloves, goggles and earmuffs.
Nut Breaker
With this special tool (I call it a wrench) you can break any nut if it is impossible to unscrew it.
Surely any of you have come across rusted nuts, especially when overhauling the chassis, tearing off the splines and cursing.
Now everything is simple: put on the ring, brought the hardened “tooth” to the nut and twist until it just breaks the nut. A big plus of such a tool is that the thread on the bolt or stud is not damaged, all that remains is to throw off the broken nut and drive a new one with oil along the thread.
Kiwi pliers
You probably have a lot of pliers in your arsenal of tools, but there definitely aren’t any!
Have you noticed that when you try to grab a small part in an uncomfortable place with ordinary pliers, your hand makes it difficult to see the process, blocking it?
Kiwi pliers, so named for some resemblance to this New Zealand bird, will solve this problem - it will be more convenient to work.
Set of moving heads for hard-to-reach places
Having such a set, where each head has its own cordan, you get additional features when working in hard-to-reach places of the car. These sockets have a much shorter body than normal sockets when used with the stock gimbal in the kit.
Minus one, this set is not cheap.
Hook set
When disassembling a car for repair, it is often necessary to disconnect various electrical connectors.
IN latest models cars, they are often combined with plastic fasteners and detached without a special tool, they can be easily damaged.
With this set of hooks, almost any connector can be conveniently disconnected without breaking it.
Spark plug pliers
If you try to pull out the candle cap with ordinary pliers, you can easily damage the rubber cap or the wire itself. So we came up with this interesting gadget- special pliers for removing high voltage wires from the spark plug.
Two point jack
There are cases when, when performing repair work, it is necessary to jack up two places at once.
This problem can be solved by using a jack head with two independent (adjustable) seats. This fixture is installed instead of a regular saddle. Can be extended up to right size, as well as rotate the crossbars around the central axis of the jack.
Tightening torque with digital precision
Tightening the bolts without a special torque wrench, without taking into account the recommended tightening torques, can cause serious damage to the car.
As a rule, a professional auto repairman who respects his client in the workshop has several different torque wrenches for different tasks. Now, this amount can be replaced by purchasing one electronic digital adapter and using it with a ratchet or other wrench with a half-inch adapter. The digital display will show the current torque and beep when the correct torque is reached.
Magnetic badge
How much time can be spent looking for a just unscrewed part: “I just put it somewhere here ...” a bolt, a nut and similar little things that are always lost.
A very interesting solution is a magnetic badge on the belt. Just stick an unscrewed screw (nut) to it and you won’t have to look for it when the part is needed again.
Tools for hard to reach places
Here are six more interesting mini sets of special tools for working in hard-to-reach places during disassembly-assembly. Here, in principle, everything is clear where and how they can be used.
- Set of four short screwdrivers.
- A set of ratchet and bits with various curly tips: stars, hexagons, squares.
- A flexible extension with a magnetic tip that can accommodate a variety of bits or sockets.
- Miniature rotating gimbal with ¼ inch adapter.
- Set of three special ratchets.
- A set of 90-degree ratchet screwdriver and bits for it.
Stand
Interesting, I don't even know what to call it.
The platform is mounted directly on the wheel, has several adjustments, both in width and in height. It is very convenient when you are repairing a high jeep or minibus. Of course, you can use, for example, a box to stand higher, but standing on a box is somewhat inconvenient and you can easily, at the most unnecessary moment, drive away from the wheel, and all that remains for you is to slow down with your face on the hood ... probably everyone knows?
Mirror and magnets for inaccessible places
Mirror on a telescopic handle and two magnets included (one swivel).
Every auto repairer should have this kit.
Imagine the situation that when unscrewing the nut, you did not hold it, and it fell somewhere on the engine or gearbox. How to find and get it?
And here, a mirror and a magnet will come to your aid.
Get maximum power in a hard to reach place
Looking at this set special keys, it is immediately clear what it is intended for.
Using an extension and a ratchet standard set heads, you can tighten almost any "uncomfortable" nut in the engine compartment. Perfect for dismantling the steering gear or brake system.
Achieving the ideal tightening torque
This special torque wrench will prevent you from accidentally stripping threads in modern aluminum engines. If you did not decide to purchase an electronic device for controlling the tightening torque, about which it was a little higher, then this very inexpensive key will be accurate enough and just what the doctor ordered.
Two models of this tool (almost full coverage of all values) will undoubtedly be a good purchase for your garage.
How to unscrew the bolt if the hat is broken?
Undoubtedly, everyone has come across this "nightmare" - when a rusted old bolt is unscrewed, its cap breaks off (breaks off) and that's it ...
Dances with a tambourine begin, drilling, restoration of threads with a tap, etc.
With this set, in the photo below, you solve the whole problem at once in a complex. It has everything to accurately drill and extract what is left of a bolt with a diameter of 5 mm to 16 mm from the body.
Digital safety tester
If you're up for a test electrical circuits are still using an analog tester, then there is a very high probability that you will spoil on-board computer car.
The digital tester is safe because it does not use a ground cable. You simply stick it into the test socket or pierce the insulation of the wire (the stainless steel tip is sharp enough) and with your other hand touch any metal part of the car to complete the circuit.
Checking from 3 to 24 Volts works direct current. It is possible to install sound signal or turn on the LED to signal the presence of voltage.
Save the Hoses
Very useful tool for removal of antifreeze hoses. After several years of operation, the antifreeze hoses in the places where they are tightened with clamps firmly stick to the pipe. If you don't want to cut the hose during removal and save it for later installation, then this special hook tool is what you need.
Simply insert the pointed end under the hose and pull it around the pipe.
This cool tool will help you save a lot of money.
You can buy these and other sets on the largest portal amazon.com, you just have to look, some keys can be both in the metric system and in inches.
It is not so easy to buy such a tool in Russia, except to search in online stores.
The AutoPromImport online store sells professional tools for service stations for various purposes. To buy a tool for a car service in Moscow at a low price in an online store, you need to place an order through the basket or contact our managers using the service back call. With us, each specialist will select for himself the necessary and high-quality auto tools, the cost of which is affordable for both car service and private individuals. By purchasing tools as a set, there is no need to buy everything you need separately.
A professional special tool for car service allows you to carry out car repair work of any complexity, therefore it is the most in demand in this industry. Kits applied as repair cars as well as for large trucks.
How to order car service tools
Our online store provides a wide range of tools for service stations, such as: sets of hydraulic and pneumatic devices, tools for disassembly and assembly various nodes, the cost of which depends on the manufacturer, equipment and materials used in their production.
To accurately order your favorite set of tools special purpose, you need to familiarize yourself with the basic technical specifications on which prices depend. High quality hand tools that match all technical requirements, allows you to carry out repair work on cars and trucks in the most difficult conditions where the use of machines is not possible.
Special tools for car service
The automotive industry is moving to a more advanced level every year. There are more and more perfect modern machines, more and more technologically advanced and multipurpose equipment for their repair. However, so far it has not been possible to replace the work of car mechanics, performed by means of hand tools. This is what determines the need for any service and service stations in professional silent assistants. It remains only to decide on specific positions and brands.
Choosing professional tools for car service and service stations
The warehouses of our online store are based in Moscow, so special tools from world leaders come to us directly from America, Asia and Europe. In addition, our specialists have many years of experience in equipping service stations. They know that from the right and rational selection tools for car service depends on the speed and productivity. And the opposite situation will make the work of the masters more burdensome, and often even impossible. Based on this, we have made every effort to form our range of the most necessary, high-quality and reliable tools for workshops. We have been selling them for several years, and therefore we can guarantee the following:
- you can buy tools from trusted manufacturers from us, who have proven themselves not only in foreign countries, but also in domestic market, and correspond to Russian ideas about convenience and safety;
- our specialists are always ready to advise you and assist in choosing the tools that will make the work of the masters in the car service efficient, comfortable and highly profitable;
- direct contracts with manufacturing plants allow us to set attractive prices for products without compromising the quality of the product itself and the additional service we offer;
- we constantly update the range of car service tools and follow the latest industry news, so we are aware of the latest trends and are happy to share them with you, offering only modern products;
- in addition to universal components, you will find highly specialized tools that will allow you to expand the range of services provided, attract new customers and gain a unique advantage over competitors;
- we work only with trusted manufacturers and carefully monitor their reputation and feedback on the tools they produce for car service, because we care about what our customers will use.
The stock of tools in our warehouse is constantly updated and supplemented, and you can track all changes in the catalog of our online store. If you did not find what you were looking for, then let our specialists know about it and we will try to help you. Tools are a justified necessity, and high-quality tools are a great opportunity for the development and long-term prosperity of your business.
