Car mechanic mechanic job description. Job description of a locksmith, job responsibilities of a locksmith, sample job description of a locksmith

16.04.2019

1. General Provisions

1. This job description defines the functional duties, rights and responsibilities of a car mechanic.

2. A person with a secondary education and appropriate training in the specialty is appointed to the position of a car repairman.

3. A car repairman must know the basic techniques for disassembling individual simple components; the purpose and rules for the use of the locksmith and measuring instruments used; name and marking of metals, oils, fuel, brake fluid, detergent compositions; basic information about the structure of cars and motorcycles; assembly order of nodes; techniques and methods for cutting, splicing, insulating and soldering electrical wires; main types of electrical and insulating materials, their properties and purpose; ways of performing fastening work and the volumes of the first and second Maintenance; purpose and rules for the use of the most common universal and special devices and instrumentation; main mechanical properties processed materials; appointment and use of cooling and brake fluids, oils and fuels; rules for the use of pneumatic and power tools; system of admissions and landings; quality and roughness parameters; fundamentals of electrical engineering and metal technology in the scope of the work performed.

4. A car repair mechanic is appointed to the position and dismissed by order of the head of the institution in accordance with the current legislation of the Russian Federation.

5. A car repair mechanic reports directly to the deputy head of the AChE or the head of the motor transport unit (garage).

2. Job responsibilities

Carrying out car repairs. Dismantling of car components. Chisel cutting, hacksaw cutting, filing, deburring, washing, threading, drilling holes on the jig in the car, cleaning from dirt, washing after disassembly and lubricating parts. Participation in repairs under the supervision of a highly qualified locksmith.

3. Rights

The car mechanic has the right to:

1. make proposals to the management of the institution on the organization and conditions of their work;

2. use information materials and legal documents necessary for the performance of their duties;

3. pass certification in accordance with the established procedure with the right to receive the appropriate qualification category;

4. improve your skills.

A car repairman enjoys all labor rights in accordance with the Labor Code of the Russian Federation.

4. Responsibility

The Automotive Technician is responsible for:

1. timely and high-quality implementation of the duties assigned to him;

2. organization of their work, timely and qualified execution of orders, instructions and instructions of the management, regulatory legal acts on their activities;

3. compliance with internal regulations, against fire safety and safety precautions;

4. maintaining the documentation provided for by the current regulatory legal acts;

5. prompt action, including timely informing the management, to eliminate violations of safety, fire and other rules that pose a threat to the activities of the institution, its employees and other persons.

For violation of labor discipline, legislative and regulatory acts, a car repairman can be brought in accordance with applicable law, depending on the severity of the misconduct, to disciplinary, material, administrative and criminal liability.

Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2017
Part No. 2 of issue No. 2 ETKS
The issue is approved by the Decree of the Ministry of Labor of the Russian Federation of November 15, 1999 N 45
(as amended by the Order of the Ministry of Health and Social Development of the Russian Federation of November 13, 2008 N 645)

Car mechanic

§ 99. Car repairman of the 1st category

Job Description. Disassembly of simple car components. Chisel cutting, hacksaw cutting, filing, deburring, washing, threading, drilling holes on the jig in the car, cleaning from dirt, washing after disassembly and lubricating parts. Participation in repairs under the supervision of a highly qualified locksmith.

Must know: basic techniques for disassembling individual simple units; the purpose and rules for the use of the locksmith and measuring instruments used; name and marking of metals, oils, fuel, brake fluid, detergent compositions.

Work examples

1. Cars - draining water from the cooling system, fuel from tanks, brake fluid from the hydraulic brake system.

2. Air and oil filters fine and coarse cleaning- disassembly.

§ 100. Car mechanic of the 2nd category

Job Description. Dismantling of trucks, except for special vehicles and diesel engines, cars, buses up to 9.5 m long and motorcycles. Repair, assembly of simple connections and components of cars. Removal and installation of simple lighting fittings. Cutting, splicing, insulating and soldering wires. Performing fixing work during the first and second maintenance, elimination of identified minor faults. Locksmith processing of parts according to 12 - 14 qualifications using fixtures, locksmith and control and measuring tools. Performing work of medium complexity in the repair and assembly of vehicles under the guidance of a more highly qualified locksmith.

Must know: basic information about the structure of cars and motorcycles; assembly order of simple nodes; techniques and methods for cutting, splicing, insulating and soldering electrical wires; main types of electrical and insulating materials, their properties and purpose; ways to perform fastening work and the scope of the first and second maintenance; purpose and rules for the use of the most common universal and special devices and instrumentation; basic mechanical properties of processed materials; appointment and use of cooling and brake fluids, oils and fuels; rules for the use of pneumatic and power tools; system of admissions and landings; quality and roughness parameters; fundamentals of electrical engineering and metal technology in the scope of the work performed.

Work examples

1. Cars - removal and installation of wheels, doors, mudguards, steps, buffers, clamps, side brackets, fenders of trucks, tow hooks, license plates.

2. Crankcases, wheels - check, fastening.

3. Valves - disassembly of guides.

4. Brackets, clamps - manufacturing.

5. Tipper mechanisms - removal.

6. Water pumps, fans, compressors - removal and installation.

7. Plafonds, rear lights, ignition coils, candles, sound signals - removal and installation.

8. Devices and units of electrical equipment - checking, fastening during maintenance.

9. Wires - replacement, soldering, insulation.

10. Gaskets - manufacturing.

11. Springs - lubrication of leaf springs with their unloading.

12. Candles, breakers-distributors - stripping contacts.

13. Air filters, oil filters for fine and coarse cleaning - disassembly, repair, assembly.

§ 101. Car mechanic of the 3rd category

Job Description. Dismantling of diesel and special trucks and buses over 9.5 m in length. Repair, assembly of trucks, except for special and diesel ones, cars, buses up to 9.5 m in length. Repair and assembly of motorcycles, scooters and other motor vehicles. Performing fastening work on threaded connections during maintenance with the replacement of worn parts. Maintenance: cutting, repair, assembly, adjustment and testing of aggregates, assemblies and devices of medium complexity. Dismantling of aggregates and electrical equipment of vehicles. Identification and elimination of malfunctions in the operation of units, mechanisms, devices of cars and buses. Connection and soldering of wires with devices and electrical equipment. Locksmith processing of parts according to 11 - 12 qualifications using universal devices. Repair and installation of complex units and assemblies under the guidance of a highly qualified locksmith.

Must know: device and purpose of nodes, assemblies and devices of medium complexity; rules for assembling cars and motorcycles, repair of parts, assemblies, assemblies and devices; basic techniques for disassembling, assembling, removing and installing devices and electrical equipment; adjustment and fixing works; typical faults electrical equipment systems, methods for their detection and elimination, purpose and basic properties of materials used in the repair of electrical equipment; basic properties of metals; purpose of heat treatment of parts; the device of universal special adaptations and control and measuring tools; system of admissions and landings; quality and roughness parameters.

Work examples

1. Passenger cars, trucks, buses of all brands and types - removal and installation of gas tanks, crankcases, radiators, brake pedals, mufflers, replacement of springs.

2. Cardan shafts, brake drum trunnions - adjustment during assembly.

3. Fans - disassembly, repair, assembly.

4. Cylinder heads, cardan joints - check, fastening.

5. Cylinder heads of the dumping mechanism - removal, repair, installation.

6. Engines of all types, rear, front axles, gearboxes, except for automatic ones, clutches, cardan shafts - disassembly.

7. Contacts - soldering.

8. Wings of passenger cars - removal, installation.

9. Water pumps, oil pumps, fans, compressors - disassembly, repair, assembly.

10. Windings of insulating devices and electrical equipment - impregnation, drying.

11. Relay-regulators, ignition distributors - disassembly.

12. Valve seats - cone processing, lapping.

13. Headlights, ignition locks, signals - disassembly, repair, assembly.

§ 102. Car mechanic of the 4th category

Job Description. Repair and assembly of diesel, special trucks, buses, motorcycles, imported cars, pickup trucks and minibuses. Dismantling, repair, assembly of complex units, units and devices and their replacement during maintenance. Running in cars and buses of all types at the stand. Identification and elimination of defects, malfunctions in the process of adjustment and testing of units, assemblies and devices. Disassembly of parts after disassembly and washing. Locksmith processing of parts according to 7 - 10 qualifications using universal devices. Static and dynamic balancing parts and assemblies of complex configuration, drawing up defective statements.

Must know: arrangement and purpose of diesel and special trucks and buses; electrical and wiring diagrams of cars; specifications assembly, repair and adjustment of units, components and devices; methods for identifying and ways to eliminate complex defects found in the process of repair, assembly and testing of units, assemblies and devices; rules and test regimes, specifications for testing and delivery of units and assemblies; purpose and rules for the use of complex test facilities; device, purpose and rules for the use of control and measuring instruments; design of universal and special devices; the frequency and volume of maintenance of electrical equipment and the main components and assemblies of vehicles; system of admissions and landings; qualifications and roughness parameters.

Work examples

1. Engine cylinder blocks - repair and assembly with a crank mechanism.

2. Camshafts - installation in the block.

3. Generators, stators, speedometers - disassembly.

4. Hydraulic lifts of the dumping mechanism - test.

5. Torque converters - inspection and disassembly.

6. Diesel engine cylinder heads - assembly, repair, leak test, installation and fastening.

7. Engines of all types - repair, assembly.

8. Front wheels - adjustment of the angle of convergence.

9. Pads brake drums, shock absorbers, differentials - repair and assembly.

10. Compressors, brake valves - dismantling, repair, assembly, testing.

11. Automatic transmissions - disassembly.

12. Mechanical gearboxes - assembly, bench testing.

13. Dump truck bodies, dump truck mechanisms - installation, adjustment of lifting and lowering.

14. Front axles and rear clutch, cardan shafts - repair, assembly and adjustment.

15. Axles forward - check and editing under a press in a cold state.

16. Main bearings - replacement of liners, scraping, adjustment.

17. Pistons - selection by cylinders, assembly with connecting rods, change of piston rings.

18. Instruments and assemblies of electrical equipment are complex - check and adjustment during maintenance.

19. Reducers, differentials - repair, assembly, testing and installation in the rear axle housing.

20. Relay-regulators, ignition distributors - dismantling, repair.

21. Crankshaft oil seal, clutch hubs, steering ball pins, rotary cams - replacement.

22. Hydraulic and pneumatic brakes - disassembly.

23. Steering - repair, assembly, adjustment.

24. Connecting rods with pistons - check on the device.

25. Connecting rods - change of bushings in the upper head of the connecting rod with adjustment to piston pin; final fit on the crankshaft journals on a plumb line in four positions.

26. Car electrical wires - installation according to the scheme.

§ 103. Car mechanic of the 5th category

Job Description. Adjustment and testing on stands and chassis of complex units, components and devices of vehicles and their replacement during maintenance. Checking parts and assemblies of electrical equipment on test equipment and test fixtures. Installation of devices and units of electrical equipment according to the scheme, including them in the network. Identification and elimination of complex defects and malfunctions in the process of repair, assembly and testing of units, components of vehicles and electrical equipment. Complicated locksmith processing, fine-tuning of parts according to 6 - 7 qualifications. Static and dynamic balancing of parts and assemblies of complex configuration. Diagnostics and adjustment of systems and units of trucks, cars and buses that ensure traffic safety.

Must know: constructive device serviced cars and buses; technical conditions for the repair, assembly, testing and adjustment of complex units and electrical equipment; electrical and wiring diagrams of any complexity and the interaction of devices and units in them; causes of wear of mating parts and ways to identify and eliminate them; test bench setup.

Work examples

1. Units and appliances of electrical equipment - installation according to the full scheme, connection to the network, checking and adjusting them during maintenance.

2. Crankshafts with flywheels - balancing.

3. Generators, stators, speedometers - repair, assembly, testing, elimination of defects.

4. Hydraulic lifts of the dumping mechanism - assembly and testing.

5. Torque converters - repair, assembly.

6. Engines of all types and brands - bench testing, adjustment, diagnostics.

7. Devices for checking transmission, steering, flow meters and gas analyzers - maintenance, calibration, repair.

8. Front and rear axles - replacement and adjustment of bearings; brakes, steering controls, lighting and signaling systems - diagnostics.

9. Ignition distributors, relay-regulators - testing on the stand, adjustment, elimination of defects.

10. Hydraulic and pneumatic brakes - repair, assembly, installation and adjustment.

11. Cylinders, main and connecting rod bearings- check after testing on the stand, troubleshooting and final fastening of all connections.

§ 104. Car mechanic of the 6th category

Job Description. Repair, assembly, adjustment, testing on the stand and chassis and delivery in accordance with the technological conditions of complex units and components of vehicles various brands. Checking the correctness of the assembly with the removal of operational characteristics. Diagnostics and adjustment of all systems and units of cars, trucks and buses. Registration of acceptance documentation.

Must know: design features cars and buses of various brands; technical conditions for the repair, testing and delivery of complex units and assemblies; ways full recovery and hardening of worn parts; procedure for registration of acceptance documentation; repair rules and methods for adjusting and calibrating diagnostic equipment.

Work examples

1. Automatic transmissions - assembly, adjustment, testing.

2. Stands for checking the traction, economic and braking qualities of vehicles - maintenance, repair, calibration.

3. Devices for testing electrical systems, ignition, pneumatic brake systems, power steering - maintenance, repair, calibration and adjustment.

§ 104a. Car mechanic 7th grade

(introduced by the Order of the Ministry of Health and Social Development of the Russian Federation of November 13, 2008 N 645)

Job Description. Regulation and testing on stands and chassis of especially complex units, components and devices of cars, auto-hydraulic lifts, special vehicles intended for transportation dangerous goods. Repair of knots and units of hydraulic systems of elevators. Checking the correct assembly of components and assemblies with the removal of operational characteristics. Diagnostics and regulation of all systems and units that ensure the safety of the movement of vehicles of various brands and purposes.

Must know: features of the arrangement of serviced vehicles of various brands and purposes; technical conditions for the repair, testing, regulation and delivery of complex units, assemblies and electrical equipment; electrical and wiring diagrams of varying complexity; ways to restore worn parts of mechanisms; arrangement of test benches; types of repair and methods of calibration of diagnostic equipment.

Work examples

1. Hydraulic couplings for turning on the fan - replacement, repair.

2. Hydro-, pneumatic amplifiers - repair, assembly and regulation.

3. Injectors - diagnostics, repair.

4. Power take-off - repair, assembly, testing.

5. Couplings for advancing the angle of fuel supply, speed controller - replacement.

6. Increasing gears - repair, assembly, testing.

7. Air conditioning systems for domestic and foreign cars - refueling, maintenance, repair.

8. Brake systems with anti-blocking system of various types of cars of domestic and foreign production - diagnostics, repair, regulation.

9. Turbochargers - dismantling, repair, assembly, testing.

10. Control rods of the high pressure fuel pump - regulation.

11. Units and assemblies of transmissions of domestic and foreign cars - repair, assembly and regulation.

12. Electronic systems management - diagnostics, repair.

This manual on labor protection for a car repairman is available for free viewing and downloading.

Labor protection instructions for a car repairman were prepared on the basis of SP 12-135-2003 “Labor safety in construction. Industry standard instructions for labor protection”, containing industry standard instructions for labor protection - TI RO 047-2003, taking into account the requirements of the current legislative and regulatory legal acts containing state regulatory requirements for labor protection specified in Appendix 1 and is intended for a car repairman (hereinafter referred to as a locksmith) when he performs work according to his profession and qualifications.

1. GENERAL REQUIREMENTS FOR LABOR PROTECTION

1.1. When disassembling machines and equipment, they should be lifted (hung out), as well as removed, moved and installed heavy (weighing more than 20 kg) and bulky components and parts using lifting vehicles, devices and devices of appropriate carrying capacity.
1.2. The production of repair work should be organized in accordance with the requirements of the documentation of the machine manufacturer and technological maps developed for certain groups of vehicles, which should reflect special labor safety requirements when carrying out repair work and safe work practices when performing certain repair operations.
1.3. Locksmiths must be provided with the necessary set of serviceable tools and devices corresponding to the nature of the work performed.
1.4. Hand tools must meet the following requirements:
- hammers and sledgehammers must be mounted on the handles at right angles to the longitudinal axis of the tool and securely fastened by wedging with metal wedges; handles must be made of hard and tough wood (mountain ash, maple, elm, oak) and have an oval and smooth surface; the length of the hammer handle should not be less than 300 mm, sledgehammer 450-900 mm, depending on the weight of the tool;
- butt plates and strikers of percussion instruments (chisels, crosscuts, barbs, cores, hammers, sledgehammers, etc.) should have a slightly convex, smooth, not oblique or knocked down surface, without burrs, potholes, cracks and rivets;
- tools with pointed ends (shanks) for fitting handles (files, hacksaws, awls, screwdrivers, etc.) must have firmly reinforced wooden or plastic handles; the length of the handle must correspond to the dimensions of the tool, but be at least 150 mm; to avoid splitting, the handle must be pulled together with metal bandage rings;
- the blades of chisels, cross cutters, scrapers, drills and other cutting tools should not have burrs, gouges and cracks, and their cutting edge should be properly sharpened in accordance with the material being processed and be a flat or slightly convex surface; the length of chisels and crosscuts must be at least 150 mm, the length of the drawn part is 60-70 mm;
- the screwdriver blade must be pulled back and flattened to such a thickness that it enters without a gap into the slot of the screw head;
- wrenches should not have cracks, potholes, burrs; the jaws of the keys must be strictly parallel and not rolled;
- sliding keys should not have slack (play) in moving parts;
- needle nose pliers and pliers should not have chipped, broken jaws, handles, the jaws of the needle nose pliers should be sharp, the pliers should have a good notch;
- bars and large files for filing wide surfaces should be equipped with special handles that allow convenient processing of these surfaces;
- the ends of crowbars, mandrels for making holes in metal products should not be bent or knocked down;
- supports used in manual riveting, crimping, chasing and other work must be strong and safe;
- pullers must have a rigid structure and not have cracks, bent rods, stripped or removed threads and ensure alignment of the thrust (tension) device with the axis of the part to be removed. The grips of the pullers must ensure a tight and reliable grip of the part in the place where the force is applied;
- hoists (blocks) must have a design that eliminates the possibility of spontaneous falling of the chain (rope) or jamming it between the blocks and the holder, running, skipping or sliding the chain along the sprocket.
The teeth of sprockets and gears, as well as chain links, should not have cracks, burrs and dents on the surface; leaf chains must be movable in all swivel joints.
1.5. Rack and screw jacks must have locking devices that prevent the complete exit of the screw or rail from the jack body, manual lever-rack jacks - a device that prevents spontaneous lowering of the load when the force is removed from the lever or handle, and the support heads of the jacks - a surface that excludes the possibility of slipping of the lifted cargo.
1.6. Portable hand-held electric lamps should be equipped with a safety net with a reflector and a hook for suspension, a hose wire with a plug that excludes the possibility of plugging it into a socket connected to the mains with a voltage of over 42 V.
The cartridge must be built into the luminaire body in such a way that it is impossible to touch the current-carrying parts of the cartridge and the lamp base.
1.7. To carry the tool, the mechanic should be provided with a bag or a light portable box.
1.8. At maintenance and repair posts, indoors and outdoors, cars and other vehicles should be placed so that the distance between them, building elements, stationary technological equipment and jobs corresponded current regulations and ensured the safe movement of workers and vehicles, convenient and safe performance of technological operations for the repair and maintenance of machinery and equipment.
Aisles must correspond to the dimensions of materials, workpieces, parts, assemblies and assemblies transported by lifting and transport vehicles, and aisles must be at least 1 m wide.
1.9. Workplaces must be fully equipped with the necessary means, depending on the type of work performed (cabinets, racks, workbenches, containers and other devices for placing tools, equipment, materials, etc.), including means of visual agitation for labor safety.
1.10. Grids must be laid at workplaces with cold floors (cement, asphalt, clinker, etc.).
1.11. Places of work outside inspection ditches, overpasses or lifts must be equipped with wooden deck chairs.
1.12. Workplaces, aisles, driveways must not be cluttered. Equipment, tools, fixtures necessary for work, as well as materials, blanks, parts, assemblies and assemblies should be placed in convenient and easily accessible places in such a way as to exclude the possibility of accidental movement or falling of these items.
1.13. Mobile and portable garage equipment and devices intended for installation, dismantling and transportation of assembly units must have grips, handles, brackets, frames, etc., and mobile equipment, in addition, must be equipped with parking braking devices. The operability of the brake parking device should be checked at the rated load of the equipment on a site with a slope of at least 3%.
1.14. When repairing and servicing equipment from a high platform, workplaces must be provided with scaffolds, step ladders that have the appropriate test marks, inspected and approved for operation by the work manager.
It is forbidden to use ladders for repairs.
1.15. Scaffolds must be stable, of appropriate carrying capacity and have appropriate guards, a ladder for climbing them, handrails. The metal supports of the scaffolds must be securely connected to each other. Metal scaffolds must be grounded.
Scaffold deck boards must be laid without gaps and securely fastened. The ends of the boards should be on supports. The thickness of the scaffold boards must be at least 40 mm.
1.16. Portable wooden step-ladders must have cut-in steps at least 150 mm wide. Ladder - A ladder must be of such length that a worker can work from a step at least one meter from the top of the ladder.
Step ladders must be equipped with a device that prevents the possibility of shifting and overturning during operation. At the lower ends of the ladders there should be fittings with sharp tips for installation on the ground, and when using the ladders on smooth surfaces (metal, tile, concrete, etc.), they should be put on shoes made of rubber or other non-slip material.
Step-ladders that have not passed the appropriate tests, inspection and operation permit from the work manager - it is prohibited to use.
1.17. To work in front and behind the machine installed above the inspection ditch (trench) and to cross the inspection ditch, it is necessary to use special inventory bridges, and to descend into the inspection ditch and rise from it, special ladders.
1.18. Trolleys for transportation must have racks and stops that protect the transported units and assemblies from falling and spontaneous movement of cargo along the platform of the trolley.
1.19. Machinery and equipment before being installed at the maintenance and repair post must be cleaned of dirt, oil, logging residues, snow and washed.
1.20. Works related to washing, cleaning, maintenance and repair of machinery and equipment must be carried out with idle engine, except when the operation of the engine is required in accordance with technological process.
1.21. The car and other vehicles installed at floor service or repair stations must be securely fixed by installing at least two stops under the wheels, braked by a parking brake, while the gear lever must be set to the position corresponding to the lowest gear. On machines with gasoline engine the ignition must be turned off, and on machines with diesel engine fuel supply is blocked. A sign must be hung on the steering wheel with the inscription: "Do not start the engine - people are working!".
1.22. The car installed on the turntable must be securely fixed using the devices provided for by the design of the stand; fuel and working fluids are drained, rechargeable batteries dismantled, all loose items from the body, cab and interior removed.
1.23. All types of repair and maintenance of equipment with an electric drive must be carried out with the machine turned off and the electric drive turned off.
A sign “Do not turn on - people are working!” should be posted on the starting device of the machine.
1.24. Repair of vehicles in the security zones of overhead lines, near excavations (pits, trenches, ditches, etc.) with unreinforced slopes, near open openings and wells is prohibited.
1.25. Place of repair work in dark time days should be illuminated.
1.26. When repairing vehicles on the territory of a third-party operating enterprise, it is possible to use the mechanisms, devices and vehicles of an operating enterprise only with the permission of the administration of this enterprise and subject to the maintenance of the above mechanisms, devices, etc. personnel authorized to operate the above mechanisms.
1.27. Maintenance posts should be equipped with general ventilation, and the supply air should be distributed dispersed. Air removal should be carried out only from the upper zone.

2. HEALTH REQUIREMENTS BEFORE STARTING WORK

2.1. Before starting work, the locksmith must:
a) receive a task and be instructed at the workplace on the specifics of the work performed;
b) bring overalls and other personal protective equipment into proper condition, fasten the cuffs and cuffs of the trousers of the overalls, remove the hair under a tight-fitting headdress, remove the tie;
c) when performing work heightened danger get acquainted with the measures that ensure the safe performance of work and sign the work permit issued for the work performed.
2.2. After receiving the assignment, the locksmith must:
a) get acquainted with the flow chart for the operation or factory documentation;
b) prepare necessary funds personal protection and check their serviceability;
c) check the condition of the workplace, approaches to it, make sure that the lighting of the workplace is sufficient;
d) make sure that the lifting mechanisms and devices, means are in good condition small mechanization; arrange them at the workplace in an order convenient for the production of work;
e) when using a portable power tool, including a portable electric lamp, it is necessary to make sure that the wire insulation is intact and that the power tool has a mark on the periodic insulation test (once every 6 months);
f) make sure that the car is reliably braked, hang it on steering wheel sign "Do not start the engine! People are working!”; if necessary, install inventory brake shoes under the wheels;
g) make sure fuel tanks and fuel drives are freed from fuel residues;
h) make sure that the machine is free of dirt, snow, etc.;
i) prepare the bed for work under the machine, which is outside the inspection ditch of the lift.
2.3. The locksmith should not start work in case of the following violations of labor protection requirements:
a) malfunctions of technological equipment, protective equipment for workers and tools specified in the manufacturer's instructions for their operation, in which their operation is not allowed;
b) untimely testing (primary, periodic) of equipment, technological equipment, hot-load equipment, including jacks, tools;
c) untimely carrying out of the relevant tests or the expiration of the service life of the protective equipment for workers established by the manufacturer, the regulatory requirements of labor protection standards;
d) unstable position of units, assemblies of repaired vehicles;
e) the presence near the workplace of uninsulated (accessible to touch) wires and cables under voltage;
f) insufficient illumination, clutter of the workplace and approaches to it;
g) in the absence of fire extinguishing equipment and first aid in the work area; medical care;
h) the absence of a work permit for the performance of work of increased danger.
Detected violations of security requirements must be eliminated on their own before the start of work, and if it is impossible to do this, the locksmith is obliged to report them to the immediate supervisor.

3. HEALTH REQUIREMENTS DURING WORK

3.1. When disassembling machines and equipment, rusted nuts (bolts) should be unscrewed after wetting them with kerosene. When working with wrenches, the wrenches must be selected according to the size of the nuts and bolt heads. It is forbidden to use gaskets between the jaw of the key and the face of the nut, as well as to increase the keys with other keys or a pipe.
3.2. Faulty bolts must be cut with a hacksaw or cut with a chisel.
3.3. It is allowed to use hand-held electric and pneumatic tools only in accordance with their purpose specified in the passport, while locksmiths must know and comply with the requirements of the “Instructions for labor protection when working with hand-held electrified and portable pneumatic tools”.
3.4. Works related to cutting, chasing, riveting, etc., in which metal particles may fly off, must be carried out in glasses or masks with safety glasses, the place of work must be fenced with portable shields (nets).
3.5. Cutting, cutting and processing of metal with a hand tool is allowed only with a fixed position of products, parts or blanks, using a vice, clamps, clamps for thin sheet metal, as well as plates and anvils for thick and strip metal.
3.6. Pressing in and out of parts with a tight fit should be carried out with presses, screw and hydraulic pullers. Presses must be equipped with a set of mandrels for various pressed or pressed parts. Random items are not allowed. In some cases, you can use punches and hammers with tips and mandrels made of soft metal.
3.7. When pressing or pressing parts with a sledgehammer and a punch, the latter should be held with tongs or a special grip.
It is forbidden to be opposite the worker with a sledgehammer, you should stand to the side of him.
3.8. When cutting metal with manual or mechanical hacksaws, it is necessary to firmly fix the part being cut and the hacksaw blade.
When cutting metal with hand hacksaws, fingers should not be held directly at the place to be cut. The place of the cut must be lubricated with drying oil or machine oil. It is necessary to beware of cuts of hands on the edges of sawn off, chopped off or chopped metals.
3.9. When servicing and repairing the machine using a lift, a sign must be posted on the lift control mechanism with the inscription "Do not touch - people are working!". In the working position, the lift plunger must be securely fixed with a stop to prevent spontaneous lowering of the lift.
3.10. To lift equipment, assemblies, assemblies and other assembly units by hoisting mechanisms, follow the places and devices specially designed for this purpose in accordance with the instructions and diagrams for safe methods of slinging, tying and tilting of goods, indicating the devices used. Schemes and instructions should be posted at workplaces.
Loads for which a slinging scheme has not been developed must be lifted in the presence and under the guidance of an employee responsible for the safe performance of work on moving loads. Raise (hang out) the rolling stock for towing hooks and shock-harness devices are not allowed.
3.11. Before dismantling the assemblies, assemblies and parts associated with hydraulic system or lubrication, power and cooling systems, you should first drain the oil, coolant and fuel into separate containers, while preventing them from spilling and splashing. Spill points should be immediately sprinkled with dry sawdust, sand, followed by their cleaning and wiping the spill area with a dry rag. Containers for draining and storing antifreeze must have a clear explanatory inscription and an established symbol for toxic substances.
3.12. The dismantling of mechanisms and assemblies associated with systems operating under pressure should be carried out only after the pressure in the system has been reduced to atmospheric.
3.13. When disassembling (assembling) units and mechanisms with springs, it is necessary to use devices that exclude the sudden action of springs. The installation of compressed springs should also be done using special tools.
Assembly units of machines moving under the action of their own weight, by tensioning springs, etc., must be blocked or lowered onto a support to prevent movement.
Heavy parts of the machines should be lowered to the ground, placed on wooden linings or cages made of beams or on inventory trags of the appropriate carrying capacity.
3.14. Installation (dismantling) of machines must be carried out under the supervision of a person responsible for technical condition machines in accordance with the technological map.
3.15. Before carrying out work related to turning the crankshaft and cardan shafts, it is necessary to additionally check the ignition off, the neutral position of the gear lever, release the parking brake lever.
After performing the necessary work on turning the shafts, the car must be braked with a parking brake.
3.16. When removing and installing springs on cars and other vehicles in garages, it is necessary to first unload the springs from the mass of the car by raising the frame (body) with a lifting mechanism, followed by installing metal stands (tragus) under the hung frame or body. In the field, for these purposes, it is necessary to make cages from beams with a length of at least 1 m. The design and use of tragus must guarantee the car and other vehicle from falling.
3.17. When lifting (hanging out) the machine using jacks Special attention should pay attention to the state of the ratchet with the dog, gear rack and screw threads, as well as the presence of a device that prevents the screw and rail from leaving the housing. If the thread of the screw or nut is worn by more than 20%, it is forbidden to work with a jack.
3.18. When lifting (hanging out) one end of a car, diesel locomotive, wagon, their extreme opposite wheels must be pre-wedged with brake shoes. It is not allowed to use wheel rims, barrels, chocks, bricks and other random objects as supports and brake shoes.
3.19. When hanging the machine on a dirt surface, it is necessary to level the jack installation site, put a pad of sufficient size and strength under the jack, on which to install the jack.
3.20. Before lifting a part of the machine with a jack (in case of machine repair on the line), it is necessary to stop (switch off) the engine, brake the machine with a parking brake and inventory shoes; remove people from the passenger compartment (body), the cab of the car, close the doors and place at least two inventory stops (brake shoes) under the lifted wheels. The use of random objects for use as stops (brake shoes) is prohibited.
It is forbidden to rest the jacks on bricks, round and semicircular wooden parts and other unstable objects.
3.21. When hanging the bus (frameless structure) using a jack to dismantle the wheel, you must first hang out the body, and then install a stand or inventory trestle of the appropriate load capacity under it and lower the bus body onto it.
Only after that you can start working on dismantling the wheel by installing a jack under a special place on the front or rear axle.
3.22. Leave the machine (equipment), as well as stay or perform work on the machine (equipment) or under it, hung out only on one lifting mechanisms(jacks, hoists, winches, cranes, etc.) is prohibited.
3.23. When removing and installing components and parts (gearboxes, transfer box, clutches, cardan shaft etc.), which are in a suspended state, it is necessary to use insurance (fixing) devices and devices (carts-lifts, stands, stops, cable loops, contractions, etc.), which guarantee the removed and installed parts and assemblies from their spontaneous displacement or falls.
3.24. Removal and installation of such parts as brake, damping and valve springs, drum and spring pins that require great physical effort, or the removal and installation of which is associated with inconvenience and danger, is allowed to be carried out using special pullers and other devices that prevent their sudden action.
The dimensions and design of the pullers must correspond to the dimensions of the parts to be removed.
The replacement of the rope on the winch drum should be done by two people (one should control the winch, the other should monitor the winding of the rope on the drum).
It is possible to tension and correct the rope wound on the drum only with the help of a fork device (device) that ensures the safety of the worker.
To tension the rope when winding it on the drum, use a load (log, whip or other objects) attached to the free end.
3.25. Before removing the cab or body, broken glass must be removed, and the torn edges of the lining should be bent inward.
3.26. The removed components, assemblies and parts should be firmly and stably laid on special gaskets, stands, racks and other devices and devices. Shafts, springs, cardan shafts and other long parts must be laid in a horizontal position.
3.27. The removed units and parts must be washed in washing installations before their inspection and repair, and in the absence of such, they must be thoroughly washed with kerosene or other permitted solvents in containers specially designed for this purpose or wiped with a brush, rags, abundantly moistened with kerosene (solvent) , in specially designated premises (places).
3.28. Disassembly and assembly of small components and parts should be carried out on workbenches, and large-sized units and components (engines, gearboxes, rear axles, etc.) - on special tables, stands that ensure their stable position.
When assembling and installing especially heavy parts, checking the coincidence of holes in connecting parts, assemblies and assemblies should be done only with the help of a barb or mandrel.
3.29. When assembling and joining sections (assembly units), it is necessary to use rectangular wooden or metal bars as gaskets, and it is forbidden to use round and semicircular objects.
3.30. Before welding work on the machine (equipment), gas tanks must be removed or covered with asbestos covers. When working together with a welder, the mechanic must be provided with special protective goggles with a light filter.
3.31. When sharpening cutting tools on machines with abrasive grinding wheels, locksmiths must know and comply with the requirements of the “Instructions for labor protection when working on a grinding machine”.
3.32. When working with a blowtorch, locksmiths must know and comply with the requirements of the “Instructions for labor protection when working with a blowtorch”.
3.33. Repair, replacement of the lifting mechanism of the body of a dump truck or adding oil to it in all cases must be carried out after installing a special stop under the raised body, which excludes the possibility of its (body) falling or spontaneous lowering.
The use of various random supports instead of an emphasis, linings is prohibited.
When replacing the lifting mechanism, it is obligatory to install a second metal stop (latch corner). It is forbidden to work under a raised and overloaded body without installing a stop.
3.34. When repairing and servicing manipulator-type machines and equipment, the boom of which has several degrees of movement, the end of the boom must be lowered to the ground (overpass) and rigidly fixed.
3.35. Starting the engine during testing and running it on the stand must be carried out by a starter, starting motor or a special device. The crank may only be used for adjustment work.
3.36. Work near the fan impeller may only be carried out when removed belt fan, it is necessary to remove and put on the belt only when the engine is not running.
3.37. Clutch adjustment operations on vehicles with carbureted engines must be performed by two workers, one of which must turn cardan shaft using the starting handle. It is not allowed to use crowbars to turn the crankshaft from the side of the mechanic.
3.38. Upon completion of repair and maintenance, all guards and safety devices removed from the machine (equipment) must be installed in place, firmly and correctly fastened.
3.39. When testing and running the engine on a car, diesel locomotive, tractor, the vehicle must be braked with a parking brake, the gear lever is set to the neutral position, and brake shoes are installed under the wheels. When starting the engine with the starting handle, it is forbidden to use additional levers and amplifiers, as well as to take the handle in the girth of the hand. The turn of the handle should be from the bottom up.
3.40. Starting the engine and starting the vehicle from a place must be carried out under the condition of ensuring the safety of those working with the machine, as well as those who are near it.
3.41. car towing, construction machines for the purpose of their start-up after repair is prohibited.
3.42. The brakes of automobiles, tractors, diesel locomotives and machines based on them should be tested on a special site or section of the track, while their dimensions and condition should be such that the safety of people and machines is ensured even in the event of a brake failure.
3.43. It is allowed to carry out work near moving mechanisms, electrical wires and electrical installations only when the equipment is stopped and the voltage is removed; if it is impossible to do this under the conditions of production, then dangerous places (zones) must be protected and work must be carried out in the presence of the work manager.
3.44. The locksmith is prohibited from:
a) work lying on the floor (ground) without using a sunbed;
b) perform any work on a vehicle (trailer, semi-trailer) hung only on one lifting mechanism (jack, hoist, etc.) with the exception of a stationary lift;
c) place under the hung-out vehicle (trailer, semi-trailer) instead of inventory trestles of the appropriate carrying capacity, wheel disks, cuttings of boards, bricks and other random objects;
d) remove and install springs on vehicles (trailers, semi-trailers) of all types and designs without first unloading them from the mass of the body by hanging the body with installation under it (body) or under the frame of the vehicle stands (tragus) of appropriate carrying capacity;
e) carry out maintenance and repairs with the car engine running, with the exception of certain types works, the technology of which requires the start-up and operation of the engine;
c) lift or hang out a car (trailer, semi-trailer) by towing devices (hooks) by grabbing them with cables, chain or hook of a lifting mechanism;
g) remove, install and transport units (assemblies) when mooring (slinging) them with a cable or ropes; without the use of special removable devices;
h) lift (put in place) the load with an oblique tension of the cable or chains;
i) work on faulty equipment, as well as faulty tools, devices, small-scale mechanization;
j) leave the tool and parts at the edges of the inspection ditch, on the repaired vehicle;
k) work under the raised body of a dump truck without the use of a special additional stop;
l) use special supports and linings instead of a special additional stop;
m) work with damaged or incorrectly installed stops;
o) start the engine and move the car with the body raised;
o) carry out repair work under the raised body of a dump truck without first releasing it (the body) from the load;
p) turn the cardan shaft with a crowbar or mounting blade;
c) blow off dust, sawdust, shavings, small scraps using compressed air.
3.45. In the area of maintenance and repair of vehicles is prohibited:
a) wash and wipe the car, units and components with flammable liquids (gasoline, kerosene, solvent, etc.);
b) store flammable liquids and combustible materials, acids, alkalis, paints, solvents, calcium carbide, etc., in quantities exceeding the replacement need for them;
c) refuel vehicles with fuel, lubricating oils;
d) store clean cleaning materials with used ones;
e) store used (contaminated) cleaning material outside a special fireproof container with a lid;
f) block up the passages between the racks and exits from the premises with materials, equipment, production and packaging containers, assemblies and assemblies;
g) store used oil, empty containers from fuel and lubricants.
3.46. spilled fuel or lubricating oil and other flammable liquids must be immediately removed using sawdust, sand, which, after use, must be poured into metal containers with tight lids installed outdoors.
3.47. Used cleaning materials should be immediately put away in metal boxes with tight lids, and after the end of the work shift they are removed from the production facilities to specially designated areas.
3.48. When checking the level of oil and liquid in the units, it is forbidden to use open fire.
3.49. When replacing or filling oils and liquids in units, drain and filler plugs must be unscrewed and wrapped only with tools intended for this purpose.
3.50. To supply grease to high-mounted grease fittings, use a standard footrest in the inspection ditch.
3.51. Climb under autotractor equipment and get out from under it only from the side opposite to the passage.
3.52. Locksmiths and drivers should not work or be under a car hanging on a cable from an overhead crane.
3.53. If overalls or hands are wetted with gasoline, do not approach an open fire, do not smoke or light matches.
3.54. In order to avoid air pollution, do not allow prolonged, more than 5 minutes, operation of the engine in a closed, unventilated room.
3.55. After performing the repair, you need to make sure that the tool or small parts (bolts, nuts, washers, etc.) are not left on the surface or inside the repaired equipment.
3.56. When performing repairs, you need to make sure that the tool or small parts (bolts, nuts, washers, etc.) are not left on the surface or inside the repaired equipment.
3.57. Clean workplaces from dust, sawdust, shavings. small metal scraps are allowed only with the use of a brush, special hooks for removing chips.
3.58. Maintenance and repair of the car with the engine running is prohibited, with the exception of adjusting the power supply systems and electrical equipment of the engine, testing the brakes.

4. REQUIREMENTS FOR LABOR PROTECTION IN EMERGENCY SITUATIONS

4.1 In the event of a fire or a fire, the locksmith must immediately inform the nearby working people about the incident, as well as report the fire to the work manager and, if necessary, call the fire brigade. Before the fire brigade arrives at the scene of the fire, take measures to extinguish the fire with the available fire extinguishing equipment at the workplace (fire extinguisher, sand, felt mat, etc.). After the fire brigade arrives at the scene of the fire, extinguish the fire under the direct supervision of the officers from among the arrived firefighters.
4.2 In the event of an accident or an accident at work, first of all, take measures to free the victim from the traumatic factor, and then provide the victim with first medical aid (if necessary, resuscitation), organize an ambulance call or send the victim to the nearest medical facility using the transport of the enterprise .
4.3 In case of electric shock to workers, it is necessary first of all to release the victim from the action of current or step voltage, and then proceed to provide first medical, resuscitation aid.
4.4 In case of loss of stability of the repaired machine, it is necessary to stop work and take measures to eliminate emergency.
4.5 In the event of a sudden breakdown of fixtures, cutting tools, pneumatic and power tools, you must immediately disconnect them from the air and electrical networks.
4.6 All cases (accidents, accidents at the workplace, fires) must be immediately reported to the work manager.

5. REQUIREMENTS FOR HEALTH AND SAFETY AFTER THE END OF WORK

5.1 Disconnect the mechanized and electrified tools and equipment used for the production of work from the air and electrical networks.
5.2 Inspect tools and devices, wipe them and put them away in the places intended for their storage.
5.3 Tidy up workplace.
5.4 Remove overalls and safety shoes, other personal protective equipment used in the production of work and arrange them in storage places.
5.5 Report the completion of work and what has been done, as well as any malfunctions in the operation of tools, fixtures and equipment identified in the course of work, to the immediate supervisor.

(Full text of instructions with appendix)

Thank Sergey for this labor protection instruction 😉

This job description was developed and approved in accordance with the provisions of the Labor Code of the Russian Federation, the Unified Tariff and Qualification Handbook of Works and Professions of Workers Issue 2, approved. Decree of the Ministry of Labor of the Russian Federation of November 15, 1999 N 45, List of industries, workshops, professions and positions with harmful conditions labor, work in which gives the right to additional leave and a shorter working day, approved. Decree of the USSR State Committee for Labor and the Presidium of the All-Union Central Council of Trade Unions of October 25, 1974 N 298 / P-22, Standard norms for the free issue of certified special clothing, special footwear and other personal protective equipment to workers in cross-cutting professions and positions in all sectors of the economy, employed in work with harmful and ( or) dangerous working conditions, as well as work performed in special temperature conditions or associated with pollution, approved. by order of the Ministry of Health and Social Development of the Russian Federation of October 1, 2008 N 541n, and other regulatory legal acts regulating labor relations.

1. General Provisions

1.1. The 5th category car repair mechanic belongs to the category of workers and reports directly to [name of the position of the immediate supervisor].

1.2. A person with an average professional education and at least [value] years of work experience in the specialty.

1.3. A car repairman of the 5th category is accepted and dismissed from work by order [the position of the head of the organization].

1.4. A car mechanic of the 5th category must know:

- basic methods for disassembling individual simple units;

- the purpose and rules for the use of the locksmith and instrumentation tools used;

- name and marking of metals, oils, fuel, brake fluid, detergent compositions;

- basic information about the structure of cars and motorcycles;

- the order of assembly of simple nodes;

- techniques and methods for cutting, splicing, insulating and soldering electrical wires;

- the main types of electrical and insulating materials, their properties and purpose;

- ways of performing fastening work and the scope of the first and second maintenance;

- the purpose and rules for the use of the most common universal and special devices and instrumentation;

— basic mechanical properties of processed materials;

- appointment and use of cooling and brake fluids, oils and fuels;

- purpose and basic properties of materials used in the repair of electrical equipment;

- rules for the use of pneumatic and power tools;

– fundamentals of electrical engineering and metal technology in the scope of the work performed;

- arrangement and purpose of nodes, assemblies and devices of medium complexity;

– arrangement and purpose of diesel and special trucks and buses;

– constructive arrangement of serviced cars and buses;

- Rules for the assembly of cars and motorcycles;

– electrical and wiring diagrams of cars;

— repair of details, knots, units and devices;

- basic techniques for disassembling, assembling, removing and installing devices and electrical equipment;

- adjustment and fixing work;

- typical malfunctions of the electrical equipment system, methods for their detection and elimination;

— basic properties of metals;

– purpose of heat treatment of parts;

- the device of universal special devices and instrumentation;

— system of tolerances and landings;

— grades and parameters of roughness;

- technical conditions for assembly, repair and adjustment of units, assemblies and devices;

- methods for identifying and ways to eliminate complex defects found in the process of repair, assembly and testing of units, assemblies and devices;

- Rules and test modes;

- technical conditions for testing and delivery of units and assemblies;

— specifications for repair, assembly, testing and adjustment of complex units and electrical equipment;

- purpose and rules for the use of complex test facilities;

- device, purpose and rules for the use of control and measuring instruments;

- electrical and wiring diagrams of any complexity and the interaction of devices and units in them;

- design of universal and special devices;

- the frequency and volume of maintenance of electrical equipment and the main components and assemblies of vehicles;

- causes of wear of mating parts and ways to identify and eliminate them;

— arrangement of test benches;

— rules and regulations on labor protection, industrial sanitation and fire safety;

- rules for the use of personal protective equipment;

- requirements for the quality of work performed;

- types of marriage and ways to prevent and eliminate it;

- industrial signaling;

- requirements for the rational organization of labor in the workplace.

2. Job responsibilities

2.1. Dismantling of aggregates and electrical equipment of vehicles.

2.2. Identification and elimination of malfunctions in the operation of units, mechanisms, devices of cars and buses.

2.3. Chisel cutting, hacksaw cutting, filing, deburring, washing, threading, drilling holes on the jig in the car, cleaning from dirt, washing after disassembly and lubricating parts.

2.4. Connection and soldering of wires with devices and electrical equipment.

2.5. Dismantling of trucks, including special and diesel ones, cars, buses over 9.5 m long and motorcycles.

2.6. Repair and assembly of diesel, special trucks, buses, motorcycles, imported cars, pickup trucks and minibuses.

2.7. Removal and installation of simple lighting fittings.

2.8. Cutting, splicing, insulating and soldering wires.

2.9. Performing fixing work during the first and second maintenance, elimination of identified minor faults.

2.10. Performing fastening work on threaded connections during maintenance with the replacement of worn parts.

2.11. Dismantling, repair, assembly of complex units, units and devices and their replacement during maintenance.

2.12. Running in cars and buses of all types at the stand.

2.13. Adjustment and testing on stands and chassis of complex units, components and devices of vehicles and their replacement during maintenance.

2.14. Checking parts and assemblies of electrical equipment on test equipment and test fixtures.

2.15. Disassembly of parts after disassembly and washing.

2.16. Locksmith processing of parts according to 12-14 qualifications using fixtures, locksmith and control and measuring tools.

2.17. Locksmith processing of parts according to 7-10 qualifications using universal devices.

2.18. Complicated locksmith processing, fine-tuning of parts according to 6-7 qualifications.

2.19. Repair and installation of complex units and assemblies.

2.20. Static and dynamic balancing of parts and assemblies of complex configuration, drawing up defective lists.

2.21. Installation of devices and units of electrical equipment according to the scheme with their inclusion in the network.

2.22. Identification and elimination of complex defects and malfunctions in the process of repair, assembly and testing of units, components of vehicles and electrical equipment.

2.23. Diagnostics and adjustment of systems and units of trucks, cars and buses that ensure traffic safety.

2.24. Management of workers of lower ranks of the same profession.

3. Types of work

Car mechanic of the 5th category performs the following types of work:

3.1. Installation according to the full scheme, connection to the network, checking and adjusting them during the maintenance of units and electrical equipment.

3.2. Balancing crankshafts with flywheels.

3.3. Repair, assembly, testing, elimination of defects on generators, stators, speedometers.

3.4. Assembly and testing of hydraulic lifts of the dumping mechanism.

3.5. Repair and assembly of torque converters.

3.6. Bench testing, adjustment, diagnostics of engines of all types and brands.

3.7. Maintenance, calibration and repair of instruments for checking transmission, steering, flow meters and gas analyzers.

3.8. Replacing and adjusting bearings on the front and rear axles, diagnosing brakes, steering controls, lighting and alarm systems.

3.9. Checking on the stand, adjustment, elimination of defects on ignition distributors, relay-regulators.

3.10. Repair, assembly, installation and adjustment of hydraulic and pneumatic brakes.

3.11. Post-bench test inspection, troubleshooting and final fixing of all cylinder, main and connecting rod joints.

4. Rights

A car repairman of the 5th category has the right to:

4.1. For all social guarantees provided for by law.

4.2. Require the management of the enterprise to provide assistance in the performance of their professional duties and the exercise of rights.

4.3. Require the creation of conditions for the performance of professional duties, including the provision of necessary equipment, inventory, workplace that meets sanitary and hygienic rules and regulations, etc.

4.4. To receive special clothing, special footwear and other personal protective equipment.

4.5. Additional vacation.

4.6. Payment of additional expenses for medical, social and professional rehabilitation in cases of damage to health due to an accident at work and occupational disease.

4.7. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.

4.8. Submit proposals for the management of the enterprise to improve the organization and improve the methods of work performed by it.

4.9. Request personally or on behalf of the immediate supervisor documents, materials, tools, etc., necessary for the performance of their duties.

4.10. Improve your professional qualifications.

4.11. Other rights provided by labor legislation.

5. Responsibility

Car mechanic of the 5th category is responsible for:

5.1. For failure to perform or improper performance of their official duties provided for by this job description - within the limits determined by the current labor legislation of the Russian Federation;

5.2. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation;

5.3. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal, civil legislation of the Russian Federation.

Job description for a car repairman of the 5th category

JOB INSTRUCTIONS FOR A LOCKER 3 category FOR REPAIR OF CARS

1. GENERAL PROVISIONS

1.1. A car mechanic is a worker.

1.2. The main function of a car mechanic is to timely and quality repair, maintenance of car components.

1.3. The car mechanic reports to the head of the economic service of the enterprise.

1.4. The locksmith is appointed and dismissed from his position by order of the director of the enterprise in agreement with the head of the economic service.

1.5. A person who has a complete secondary or vocational education, or a special vocational training and passed medical examination.

1.6. In the event of a temporary absence of a car repairman, his duties are performed by another mechanic appointed by order of the director of the enterprise.

2. OBJECTIVES AND RESPONSIBILITIES

2.1. Qualitatively and in a timely manner to perform the functions assigned to him in accordance with the requirements of the current legislation, regulations, regulations, instructions and orders of the administration.

2.2. The locksmith of the 3rd category for car repair is obliged to:

2.2.1. Perform daily repair tasks in accordance with the approved work plan and at the request of vehicle drivers.

2.2.2. Prepare the workplace, check the availability and serviceability necessary tools and equipment.

2.2.3. Prepare the car for repair: wash the car, clean the engine, etc.

2.2.4. Install the car at the post of the repair site, using stops and linings, fix the car, eliminating the possibility of its spontaneous movement.

2.2.5. Dismantle the units to be repaired, following the sequence of removing the units from the vehicle.

2.2.6. Together with the driver, determine the maintainability of units, components and parts of the car. Perform troubleshooting selection of parts unsuitable for repair and restoration. Obtain new parts from the head of the economic service.

2.2.7. Make a complete set of parts necessary for repair.

2.2.8. Carry out repair of parts of the car to be restored.

2.2.9. Assemble the vehicle components and hand over the repaired vehicle to the driver.

2.2.10. Provide the head of the economic department with a report on the work done and the used spare parts and parts for repairs.

2.2.11. Take measures to immediately eliminate the causes and conditions that may cause downtime, an accident or other damage, and if it is not possible to eliminate these causes on your own, immediately notify the head of the economic service or another official about this.

2.2.12. Take care of personal safety and health, as well as the safety and health of other people in the process of performing any work or while being on the territory of the enterprise.

2.2.13. To be at the workplace in a sober condition and in a satisfactory state of health that does not interfere with the performance of their functional duties.

2.2.14. Give a written explanation about the violation of labor and production discipline (absence from the workplace, absenteeism, appearing at work in a state of intoxication and other misconduct).

2.2.15. Pass in deadlines preliminary and periodic medical examinations (at least once a year).

2.2.16. Cooperate with the administration in the organization of safe and harmless

Working conditions, personally takes all feasible measures to eliminate any production situation that poses a threat to his life and health or the people around him and the environment. Report danger to any official.

2.2.17. Ensure the complete safety of the property entrusted to him. Treat the property of the enterprise with care and take urgent measures to prevent damage.

2.2.18. Actively participate in community life.

2.2.20. Pass introductory, primary at the workplace, repeated, unscheduled and targeted briefings, testing knowledge on labor protection.

2.2.21. Comply with the rules and regulations of labor protection, fire safety and industrial sanitation; rules for handling equipment and other means of production, use personal and collective protective equipment.

2.2.22. Stop the operation of machines, mechanisms and other equipment if there is a threat to life and health and immediately inform the director, head of the economic service or other official.

2.2.23. Follow the rules of labor protection when working according to the instructions

2.2.24. To take part in holding sanitary days (hours), subbotniks for the improvement of the territory of the enterprise. On a sanitary day (hour), carry out cleaning, whitewashing, painting at your workplace, in common areas and in the assigned territory, as well as digging and weeding flower beds, mowing grass, cleaning weeds, dry foliage and herbage, caring for plants, etc. . l.

2.2.25. Notify the director of the preconditions for an emergency.

2.2.26. Perform their duties as part of the emergency formation of the civil defense of the enterprise.

2.2.27. To be trained in the training group according to the plan for the preparation of civil defense of the enterprise.

2.2.28. Know the warning signals of civil defense and the procedure for acting on them.

2.2.29. Participate in the promotion of civil defense issues among the employees of the enterprise.

2.2.30. Provide first aid to the injured.

2.2.31. Work on professional development by studying new technical literature.

2.2.32. Comply with the requirements of general moral and ethical standards.

2.2.33. Comply with labor regulations and labor discipline.

2.2.34. Fulfill the requirements of the collective agreement.

3. MUST KNOW:

3.1. A 3rd category car mechanic must know:

Orders, normative and other guidance materials relating to its work;

Technical characteristics of the vehicle;

Rules technical operation motor vehicle;

Technology and organization of maintenance and repair of vehicles;

The device, principle of operation, operation and maintenance of units, mechanisms and devices of the car, assigned to the corresponding category of vehicles;

Signs and causes of a car malfunction, ways to eliminate them, dangerous consequences;

System, types and methods of car repair;

Specifications for the repair of vehicle components;

car repair technology;

Technology of maintenance and repair of engines internal combustion, power supply systems, electrical equipment, mechanical parts of chassis units, car lifting mechanism;

Design features of various brands of cars;

Equipment, tools and fixtures used in the repair and technical

service;

Fundamentals of mechanics, hydraulics, heat engineering, materials science;

Organization of washing and cleaning works, defect detection of parts;

Methods of restoration repairs;

Internal labor regulations;

Collective agreement;

Instructions on OT, fire safety, electrical safety;

Rules and norms of labor protection, safety measures, industrial sanitation and fire protection;

job description;

Laws of Ukraine: "On Labor Protection", "On Fire Safety", "On Civil Defense";