Increasingly, cars with automatic transmission are found on Russian roads. Automatic transmissions are much safer and easier to operate, and modern automatic transmissions are as reliable as mechanical ones. However, the automatic transmission needs timely service and close attention from the owner of the car.
For stable operation timely maintenance, diagnostics and constant control level working fluid in automatic transmission. Oil change in automatic transmission Hyundai Accent produced after 60,000 km of run. Timely replacement, if necessary with flushing the gearbox, helps prevent serious damage transmission.
Oil change prices in automatic transmission Hyundai Accent (Hyundai Accent)
| Works | Price, rub. | A comment |
| Oil change (your oil) | from 2 000 | excluding cost of consumables |
| Oil change (our oil) | from 1 500 | from 600 rubles per liter of oil (various) |
| Car evacuation | for free | free of charge for repairs |
| Automatic transmission diagnostics | 1 000 | free of charge for repairs |
If you have questions or need advice,
Oil change in automatic transmission Hyundai Accent
Over time, the oil loses its beneficial features and accumulates harmful particles in itself, so the Hyundai Accent is a must. We do not recommend changing the oil on your own, without the participation of professionals, because even this simple procedure has its own subtleties, ignorance of which can harm the gearbox.
During an oil change, specialists pay attention to the condition of the drained working fluid. Used oil may indicate a transmission failure. By changing the oil yourself, you are unlikely to be able to see those nuances that professionals will pay attention to.
The accent can be made partially or completely, the replacement method necessary for your car is determined during visual inspection oils. Oil change price in automatic transmission Hyundai Accent with partial replacement is much lower than the cost complete replacement working fluid.
With a partial replacement, the crankcase protection is removed, the plug is unscrewed from the bottom and the amount of oil that flows out of the box by gravity is drained. The same amount of fresh fluid is poured into the gearbox. The oil level is determined by the dipstick. A partial oil change in an automatic transmission Hyundai Accent is carried out with a slight oil contamination and with a small car mileage.
The procedure for repairing your car in "Automatic Service"
Step 1. After the client's call, the employees select the most convenient time for him to repair the car. If the vehicle is not on the move, then it can be delivered to the service using a tow truck. The car will be brought to the free guarded parking lot of the technical center.
Step 2 In the process of diagnosing and troubleshooting, the causes of the breakdown will be found. Based on this, the price will be set repair work.
Step 3 Car service specialists determine the order of repair, and make a list of necessary spare parts.
Step 4 A preliminary estimate of repair work is being formed. The set amount is agreed with the client. After that, the mechanics begin to carry out repairs.
Step 5 In the process of work, all requirements and recommendations of the manufacturer are taken into account.
Step 6 After completion of work, the car is tested. Thus, the quality of the repair carried out is checked.
Step 7 Service station employees hand over a serviceable car to the client. In the presence of the client, the work is checked again vehicle.
Step 8 All necessary papers are signed. Among them is an act of repair work performed and a warranty card.
Step 9 After a quality repair, the client leaves the car service in his car. Professionals of the technical center guarantee the quality of repair work!
Changing the oil in an automatic transmission Hyundai Accent
Complete replacement is carried out using special equipment, the goal of a complete replacement is to completely displace the used oil and replace it with new. After such an operation, one hundred percent renewal of the oil in the transmission occurs.
Complete oil change in automatic transmission Hyundai Accent reduces fuel consumption, improves dynamics and speed characteristics car. All work on maintenance automatic transmissions are carried out in our service center on the highest level. Our experts perform work quickly and efficiently, while the cost of our services is quite affordable.
Sometimes there are situations when an oil change in an automatic transmission in a Hyundai Accent is urgently needed. Automatic transmission scheme ( automatic box transmission) is fundamentally different from a manual transmission. The main difference is that in mechanical box force and torque are transmitted from the engine to the chassis using gear pairs. This means that gear oils for such a box should exclude mechanical wear. gears, as well as provide their anti-corrosion protection.
In an automatic, things are quite different. In an automatic box pulling force from the engine is transmitted hydraulically. Accordingly, for automatic transmission it is necessary to apply hydraulic oil, which performs the function of the working body. There are a number of requirements for hydraulic oils:
- good washing properties;
- lack of foaming;
- antioxidant abilities;
- ability to separate moisture;
- the oil must provide good frictional adhesion;
- anti-corrosion and anti-seize properties.
How often do you need to change the fluid in the box
The main recommendations for changing the lubricant are contained in the instructions for servicing and operating the vehicle. This does not mean that the oil cannot become unusable sooner. due date. Premature oil wear is affected by a number of unfavorable factors that significantly increase the mechanical wear of transmission parts and reduce the life of the transmission oil. Among these factors are:
- Significant and alternating loads on the gearbox. This happens when transporting heavy loads and reloading extra passengers. Sign-variable loads occur when slipping as a result of movement along bad roads. Sand, gravel and slippery surface on the roads contributes sharp drops loads in the gearbox.
- City cycle. Traffic in the city is characterized by constant stops and traffic with minimum speed. This leads to increased wear of automatic transmission mechanisms and premature wear hydraulic fluid.
- High temperature operating conditions lead to premature wear and oxidation of the oil. Low-temperature regimes significantly increase the viscosity of the lubricant, violate normal mode its circulation in the system. This leads to a violation of the automatic transmission mode and premature wear of the lubricant.
To check the quality of the oil in your Hyundai, use the following method:
- take Blank sheet white paper;
- pull out the dipstick and apply a couple of drops of oil from the box to the sheet;
- the lubricant should be transparent and without foreign inclusions, if the lubricant is cloudy and black in color, change it as soon as possible.
You also need to remember that you should not buy filters from dubious manufacturers. Buy only original components - this will extend the life of the transmission oil.
Back to index
Oil selection and basic replacement methods
The modern market is saturated various brands hydraulic oils from renowned manufacturers, and the main thing here is not to make a mistake in choosing. Given the requirements of the operating instructions, the hydraulic oil in the Hyundai Accent automatic transmission must be changed every 90 thousand mileage. The plant regulates the following types of gear oils:
Engine oil must be changed through a special hole.
- original Mitsubishi oil Diamond ATF SPIII.
- transmission Castrol oil Transmax ATF. This oil guarantees optimal frictional properties and gearbox protection.
- Mineral oil Ravenol Dexron III.
- Synthetic Fluid Shell Donax TX.
There are several ways to change the hydraulic fluid in an automatic transmission:
- Partial replacement (30-50% of the total volume);
- Complete replacement (100% of the total volume with mandatory automatic transmission flushing).
Incomplete replacement is carried out through a special drain hole, which is located at the bottom of the pallet. Depending on the contamination of the hydraulic fluid, a certain part of the oil is drained. As a rule, this part does not exceed 50% of the working volume of the automatic transmission. For best effect the filter needs to be replaced. Filter replacement required additional work for dismantling the pallet. You can do such manipulations at home, having certain skills and tools.
At service stations, for a complete replacement of hydraulic fluid, they use special devices and apparatuses. The specifics of the operation of the device for changing the oil in a Hyundai automatic transmission is based on the substitution method. The machine is equipped with 2 hoses, one for filling fresh product and the other for draining it. Control is carried out by transparent flasks on the apparatus. The equipment is additionally equipped with pressure control devices. This is necessary to prevent breaks and damage to automatic transmission components.
Back to index
Preparation of tools, materials and start of replacement
For a trouble-free oil change, you must have a kit Supplies, a set of tools and fixtures. To replace you will need:
- Oil drain container.
- Funnel for pouring liquid.
- Slotted screwdriver
- A set of heads (the set should have a head for 17).
- Socket wrench for 10.
- Hammer or wooden mallet.
- Hyundai original sealant ( Catalogue number 2145133A02).
- Pan gasket (p/n 45285-22010).
- Oil filter automatic transmission Hyundai.
- Hose.
- Wooden block.
- Solvent.
- Cotton rags.
The replacement procedure requires special attention and takes a lot of time. Self-replacement best done with a partner. First you need to warm up your car well. To do this, you need to drive 8-12 kilometers in various modes engine and transmission performance. Next, you need to go to viewing hole or flyover.
The machine must be in a horizontal position.
Fix the position of the car with the handbrake, and move the gearshift lever to neutral gear.
To carry out the following operations, it is necessary to ensure free access to the lower part of the machine. Next, remove the protection using a thin 10 socket wrench and a slotted screwdriver. Unscrew the 5 fixing screws with a wrench. Using a screwdriver, remove the protective plates. You can start draining the used hydraulic fluid.
Functions ATF oils in automatic transmission Hyundai Aksent:
- effective lubrication of rubbing surfaces and mechanisms;
- reduction of mechanical load on the nodes;
- heat dissipation;
- removal of microparticles resulting from corrosion or wear of parts.
- wear of automatic transmission seals;
- wear of the shaft surfaces, the occurrence of a gap between the shaft and the sealing element;
- wear of the automatic transmission sealing element and the speedometer drive shaft;
- backlash input shaft automatic transmission;
- damage to the sealing layer in the joints between parts of the automatic transmission: sump, automatic transmission housing, crankcase, clutch housing;
- loosening of the bolts that provide the connection of the above parts of the automatic transmission;
Due to lack of oil or poor quality oil in automatic transmission Hyundai Accent:
- plungers and channels of the valve body are clogged with mechanical particles, which leads to a shortage of oil in the packages and provokes wear of the bushing, rubbing parts of the pump, etc.;
- overheat and wear out quickly steel discs gearboxes;
- rubber-coated pistons, thrust discs, clutch drum, etc. overheat and burn;
- the valve body wears out and becomes unusable.
You can check the oil level in the Hyundai Accent automatic transmission using a dipstick. The dipstick has two pairs of marks - the upper pair of Max and Min allows you to determine the level in hot oil, the lower pair - in cold. Using the dipstick, it is easy to check the condition of the oil: you need to drop the oil onto a clean white cloth.
When choosing a Hyundai Accent automatic transmission oil for replacement, you should be guided by a simple principle: it is best to use an oil recommended by Hyundai. Meanwhile, instead of mineral oil you can fill in semi-synthetic or synthetic, but in no case should you use oil "class below" from the prescribed one.
Synthetic oil for automatic transmission Hyundai Aksent is called "non-replaceable", it is poured for the entire life of the car. Such oil does not lose its properties under the influence high temperature and is designed for a very long period of use of the Hyundai Accent. But we must not forget about the appearance of a mechanical suspension as a result of friction clutch wear with a very significant mileage. If the automatic transmission has been operated for some time in conditions of lack of oil, it is necessary to check the degree of its contamination and, if necessary, replace it.
Ways to change the oil in a Hyundai Accent automatic transmission:
- Partial oil change in a Hyundai Accent box;
- Complete oil change in the Hyundai Aksent box;
A complete oil change for automatic transmission Hyundai Accent is carried out using an automatic transmission oil change unit, auto repair specialists. In this case, you will need more oil ATF than the Hyundai Accent automatic transmission can accommodate. Flushing takes one and a half or double the volume of fresh ATF. Cost will be more expensive partial replacement, and not every car service provides such a service.
Partial ATF oil change in the Hyundai Accent automatic transmission according to a simplified scheme:
- We unscrew the drain plug, drain the old ATF oil;
- We unscrew the automatic transmission pan, which, in addition to the bolts holding it, is treated along the contour with a sealant.
- We get access to the automatic transmission filter, it is advisable to change it at each oil change, or rinse it.
- At the bottom of the pallet there are magnets that are necessary to collect metal dust and chips.
- We clean the magnets and wash the pallet, wipe it dry.
- Install the automatic transmission filter in place.
- We install the automatic transmission pan in place, replacing the gasket of the automatic transmission pan if necessary.
- We twist the drain plug, replacing the gasket drain plug for automatic transmission.
The car contains fluids for different purposes, each of which is responsible for the functioning of the system. But over time, liquids exhaust their potential and need quality and timely replacement. One of these components is the Hyundai Accent automatic transmission oil.
Thanks to the lubricating fluid, the automatic gearbox operates smoothly, making it possible to effectively change the torque. The operation of the transmission directly depends on the quality of the oil poured into it. A significant stage of service is the Hyundai Accent.
[ Hide ]
What oil to use
At the moment there are a large number of all kinds of gear oils. They are distributed according to different classifications and grounds. Not every lubricating fluid is suitable for a particular automatic transmission.
If you study the instruction manual, it becomes clear which oil is the best for automatic transmission Hyundai. The manufacturer strongly recommends the use original fluids for your boxes. These products are called ATF Mitsubishi Diamond SP-III and ATF ZIC SP-III. The automatic transmission manufacturer Hyundai is not responsible for the use of products other than those recommended.
Tools
- pan gasket 45285-22010;
- sealant Hyundai 2145133A02;
- original automatic transmission Hyundai filter;
- funnel;
- part of the fuel hose;
- flat screwdriver;
- key with 17 heads;
- thin wrench for 10 with an extension cord;
- hammer;
- wooden block;
- liquid containers.
Step-by-step instruction
It should be clarified that there is a partial and complete oil change in automatic transmission. The instructions for a complete replacement will be given below.
The whole procedure may seem complicated, but in practice it is very simple, although it takes quite a lot of time. You will need an assistant to make changing the oil easier.
- Replacement begins with the fact that the car needs to be warmed up. It is enough to drive ten kilometers.
- Then place the car strictly in a horizontal position on a flyover or viewing hole.
- Put the car on the handbrake, and move the box selector to neutral gear.
- The gearbox is accessed from the bottom of the vehicle. But the unit itself is covered with a protective plate. It is removed using a thin key for 10 and a flat screwdriver. We unscrew five bolts with a key, and with a screwdriver we pull off a couple of caps.
- After that, it is necessary to unscrew the bolt with a key for 17 drain hole Automatic transmission Hyundai. Before removing the entire cap, prepare the reservoir for drain fluid. Wait until the grease is completely drained. This will take a few minutes. Be prepared for the fact that all the oil contained inside the box is hot, as the car has been warmed up.
- Then you need to remove the pallet of the box. It is fastened with 13 bolts, which are unscrewed with a 10 key. The pan may not be removed immediately due to the sealant. We apply a wooden block to the side of the pallet and hit the block with a hammer, previously supporting the pallet from below.
- We drain the remaining liquid contained in the pan, wash it and erase the old sealant. We also clean the magnets, which contain a layer of metal chips.
- The next step is to remove oil filter Hyundai. The filter also contains oil residue. Using a 10 wrench, unscrew 3 bolts, substitute the fluid reservoir and unscrew the 4th bolt.
- We clean the surface of the crankcase from the hardened sealant and degrease it.
- Installing a new filter.
- Then we put the pallet in place, having previously degreased the surface on which the new sealant or gasket will be applied.
- Before pouring in the new oil that you have chosen, you need to determine how much fluid you have already drained. To do this, for example, you can distribute all the drained liquid into bottles of the same volume or any other accessible method. The approximate volume of liquid should be a little more than 3 liters.
- Pour the same amount of oil into the box. To do this, open the hood, remove the dipstick and use a funnel to fill in the appropriate volume of liquid. Also, the automatic transmission manufacturer recommends adding another 1–1.5 liters of oil additionally.
- The radiator, which cools the automatic transmission fluid, includes 2 hoses: one is responsible for supplying oil, the other for draining. The supply hose enters directly into the radiator, and the drain hose is attached to a thin tube located nearby.
- We remove the drain hose and instead of it tightly fasten the prepared part of the fuel hose to the tube, lower its end into an empty bottle with a volume of, for example, one liter.
- The assistant then starts the engine. We observe how the old oil is poured into the bottle. The engine must be turned off shortly before filling this bottle.
- Pour oil into the dipstick hole with a volume equal to that drained into the bottle. And we repeat the replacement operation until a clean, new liquid flows into the bottle.
- We put the native hose back on the drain tube.
- The replacement of the gearbox lubrication fluid is completed after driving a certain distance on the car in order to “drive” the new oil through the automatic gearbox system.
After "running" the working fluid, we check its level: we take out the dipstick and see what mark the oil reaches. If below "max" - top up, above - drain the liquid.
This completes the replacement process.
Video "Changing the oil in automatic transmission"
Change gearbox oil Hyundai car Accent is not a difficult task, and it can be done at home. This is very beneficial, because you will not need to visit an expensive dealership. This is very important, especially if the warranty on the car has ended. Let's take a closer look at how to replace transmission oil on Hyundai example Accent with automatic transmission.
Before purchasing a lubricant, you must follow the recommendations of the manufacturers to select the appropriate product that meets all the tolerance and viscosity parameters specified in the instruction manual. There are many oils available today. affordable price. And yet, it is advisable to purchase a proven lubricant famous brand. So, for the car in question, lubrication would be the most preferable option. ATF Mitsubishi Diamond SP-III or ATF ZIC SP-III.
Replacement materials
- Sealing gasket for gearbox housing, part number 45285-22010
- Hyundai proprietary sealing compound 2145133A02
- Genuine Hyundai oil filter
- Bay funnel new fluid
- fuel hose
- Tool kit including screwdriver, 10 wrench and 17 socket
- Hammer
- Used oil drain tank
Sequence of work for a complete oil change
- It takes a short drive to warm up the engine and gearbox to operating temperature. The liquid will heat up and become thinner and more fluid. Thanks to this, all the used oil will pour out of the box. Thus, it will be possible to avoid complex washing
- After warming up the engine, the car is installed on a flyover, the ignition must be turned off
- Install the car on the observation deck in such a way that there is access to the bottom of the car. To do this, you can use a lift, viewing hole, overpass or jack.
- Turn on the handbrake, transfer the automatic transmission selector to position N (neutral)
- After access to the bottom is provided, you need to go under the car and find the location of the gearbox housing. Most likely, the box will be covered with a protective plate that needs to be removed. This can be done using a 10 head, and you can also use a flat screwdriver. Use the wrench to unscrew the five bolts. Then pull off the two pistons, after which you can remove the protective plate
- After removing the plate, access to the drain plug will open. The plug is unscrewed with a 17 bolt. Please note that after removing the plug, liquid will begin to flow out of the hole into the pan, which must be prepared in advance
- Wait for the grease to drain completely. This will take several minutes. Care must be taken to avoid burns, as heated oil is likely to be hot. It is advisable to wear gloves
- To gain access to the oil filter, you will have to dismantle the gearbox pan, which is held by thirteen bolts. They are unscrewed with a 10 key. It is possible that it is not possible to simply remove the pallet. The fact is that it is fixed not only with bolts, but also with a sealed composition. To loosen it, we apply a wooden block to the side of the pallet, and lightly beat it with a hammer. In this case, the pallet must be supported from below so that it does not suddenly fall. By that time, the waste liquid should already have completely drained from the drain hole.
- The pan must be removed carefully, as oil residues and dirt deposits may remain on it. The pan should be rinsed well, cleaned and degreased, then wiped dry
- Install a new Hyundai oil filter instead of the old one
- Apply a new sealed compound to the pallet, then put new gasket. After that, you can proceed with the installation of a new pallet
- Let's pay attention to how much waste oil spilled out. It is the same amount of new fluid that will have to be introduced into the filler hole. Should be about 3 liters
- New fluid is poured into a special hole located in engine compartment. Before filling, you must first pull out the dipstick and put it aside, then introduce a certain amount of liquid. Perhaps, in addition to the main volume (3 liters), you will have to add an additional 1.5 liters of oil
- Let's pay attention to the radiator responsible for cooling the working fluid inside the transmission. Two hoses are built into this radiator, one of which supplies oil and the other drains. So, the supply hose enters the radiator, and the second (drain) is located next to the first, and is attached to a thin tube. Carefully remove the drain hose, and in its place we put a pre-prepared fuel hose. The end of this hose is lowered into an empty container
- We give the command to the assistant to start the engine, after which we observe the draining of the old oil into an empty container. When it is full, turn off the engine.
- Pour new oil back into the dipstick hole. It is necessary to fill in about 1-1.5 liters - exactly as much as poured into that empty container
- If necessary, repeat the above procedures until clean and transparent oil flows into the bottle.
- We put back the native hose in place (attach to the drain plug)
- Start the engine, take a short trip. Due to this, the oil will “drive” through the entire gearbox and lubricate all transmission parts.
- Drive the car back onto the overpass, turn off the engine and check the fluid level. The fluid may need to be topped up if the level is low. marks Max and Min on the dipstick. On this, the process of changing the oil in the Hyundai Accent automatic transmission has been successfully completed.
Video
