Tires and wheels for VAZ Kalina, wheel size for Lada Kalina. Winter wheels 14 radius per viburnum
standard sizes, steel and cast for different configurations
When it is necessary to replace the disks with Kalina, the question arises which ones to choose - the same factory ones or not. Cast irons often look more attractive, updating the overall look of the car, but how practical is it? What should you pay attention to when choosing?
Back to index
Characteristics of regular disks of different configurations
Models of the first generation of Kalina are equipped with products of 14 and 13 inches. The light-alloy version was released with a diameter of R14. With this reduced tire profile, it is also possible to install R15 (as they did in the sports version).
For all modifications of the first generation sedan, hatchback, station wagon, sport models produced in 2004–2013, the following dimensions were used:
- wheels 5J on 13 ET40, tires suitable for them - 175 / 70R13;
- 5.5J for 14 ET37 - 175/65R14;
- 6J on 14 ET37 - 185/60R14;
- 6.5J for 15 ET35 - 195/50R15;
- 6.5J for 16 ET45 - 195/45R16.
For all modifications of the hatchback, station wagon, cross, second generation sports (since 2014), the following types of disks and tires were installed:
- 5.5J on 14 ET35, tires - 175/65R14;
- 6J on 14 ET35 - 185/60R14;
- 6J for 15 ET35 - 185/55R15;
- 6.5J for 15 ET35 - 195/50R15;
- 6.5J for 16 ET35 - 195/45R16.
There are no factory alloy wheels in the "norm" and "standard" second generation packages. In the luxury package, the buyer can choose cast R14 and R15.
Back to index
Which disks can be changed factory
When products are purchased not from those offered by the manufacturer, the radius of the wheel should be taken into account, it should not differ much from the regular one. It is necessary to take into account the year of manufacture of the car and its equipment. The parameters of the wheels are absolutely independent of the shape of the body: whether it is a sedan, hatchback or station wagon.
When selecting discs for Kalina, you need to know the number of mounting holes and the diameter of the circumference of their placement (drilling, LZ * PCD) - 4 * 98. The diameter of the main hole must match the diameter of the vehicle hub (DIA) - 58.6. Departure values (ET) must be selected as recommended by the car manufacturer. Thus, for the first generation models 1117, 1118, 1119, wheels from R13 to R16 inches are suitable; width 5–6.5; ET 25–38; DIA 58.6; LZ*PCD 4*98. The following parameters are suitable for the second generation 2192 and 2194: R from 14 to 16; width from 5.5 to 6.5; ET from 25 to 35; DIA and LZ*PCD are similar.
Properly selected rims for a Kalina car mean safety on the road, reduced fuel consumption, and extended transmission life.
Back to index
Steel or light alloy: which is better and why
Models are divided into two types according to the method of manufacturing. Steel (they are also called stampings) are distinguished by the fact that during production all parts are welded. This is a simple technology, so their price is low. The positive aspects of this option: the disks are easily restored even with deep deformations, they have high reliability, durability, repair is simple and budgetary. Negative aspects: difficulties in auto-balancing, increased weight, the same type of appearance (it is possible to modify it with caps or paint), low corrosion resistance.
Alloy products - modern and more popular, they include aluminum and magnesium alloys. According to the production method, they are divided into cast, forged, combined, titanium.
| View | Manufacturing | pros | Minuses |
| Cast. | The metal is poured into molds, then the frozen surface is treated. This production method makes the structure of the metal grainy. | Low weight. | During long-term operation in conditions of broken, bumpy roads, microcracks appear that can split the disc with a powerful blow. Repair is expensive, products are straightened on the machine. But after such a procedure, there is no guarantee of reliability during operation. |
| Forged. | Manufactured by hot forging. The texture of the metal becomes fibrous and durable. | Low weight and high strength. | Forged wheels are produced from aluminum or magnesium (luxury quality, stronger than aluminum, the price is much higher, made by prior order). |
| Combined. | Cast and forged parts are connected using special bolts. | To be repaired, and the rim can be replaced, and the central part can be left. | A considerable price, which provoked mass fakes - with decorative bolts. |
| Titanium. | Due to the large weight of the metal during manufacture, the thickness of the discs is reduced. | The most durable. | They have a high price. A small number of models are produced. |
When choosing cast specimens, you should pay attention to the metal that is part of the alloy: magnesium - lighter in weight, but with reduced strength; aluminum - less prone to cracking. So what products are most suitable for Lada Kalina? Every driver strives for maximum safety on the road. When choosing discs, you should analyze the condition of the coatings on which the car will be operated, and your driving style.
Advantages of steel disks - in attractive cost. In addition, there is the possibility of recovery after deformation. Upon impact, they do not split, but are crushed, suspension and steering parts are minimally damaged.
Alloy wheels on Kalina have such advantages.
- A wide range of different models. Additionally, there is the possibility of painting.
- The low weight increases the dynamic parameters of the suspension, which improves driving safety.
- The best indicators of heat removal from brake units.
In Europe, alloy wheels are more popular. In the Russian market, due to the quality of the roads, most drivers choose steel or forged ones.
expertvaz.ru
 Tires and wheels for VAZ KalinaOther models of VAZ: VAZ 110, VAZ 1111, VAZ 1111 Oka, VAZ 2101, VAZ 2102, VAZ 2103, VAZ 2104, VAZ 2105, VAZ 2106, VAZ 2107, VAZ 2108, VAZ 2109, VAZ 21099, VAZ 2110, VAZ 2111, VAZ 2112, VAZ 2113, VAZ 2114, VAZ 2115, VAZ 2120 Nadezhda, VAZ 2121 Niva, VAZ 2123, VAZ 2131 Niva, VAZ 2131 Niva, VAZ 4X4, VAZ Classics, VAZ Granta, VAZ Kalina, VAZ Priora , VAZ Samara, VAZ Vesta, VAZ XRAY, VAZ Largus,
Selection of tires and wheels for the car VAZ KalinaUsing the automatic selection of tires and wheels for the VAZ Kalina car, you can avoid many problems associated with their compatibility and compliance with the recommendations of car manufacturers. This is due to the significant role that they play in ensuring a number of performance characteristics of any modern vehicle. In addition, tires and rims in a modern car are one of the elements of active safety. That is why their choice should be approached as responsibly as possible, that is, with knowledge of a number of parameters of these components. Unfortunately, or, conversely, fortunately, a significant part of motorists prefer not to study the technical device of their own car thoroughly. A fully automatic selection system in this case is almost the only way to avoid the wrong choice when buying tires and rims. And there is plenty to choose from, thanks to the widest range of such products presented in the Mosavtoshina online store. |
mosautoshina.ru
 Tires and wheels for Lada KalinaOther Lada models: Lada 110, Lada 111, Lada 1111 Oka, Lada 112, Lada 1200, Lada 1200DL, Lada 1300, Lada 1300SL, Lada 1500, Lada 2104, Lada 2105, Lada 2107, Lada 21099, Lada 4X4, Lada 4x4 Urban, Lada 4x4 Urban, Lada Classics, Lada Fora, Lada Granta, Lada Largus Cross, Lada Nadezhda, Lada Niva, Lada Niva II, Lada Niva II, Lada Nova, Lada Priora, Lada Riva, Lada Samara, Lada Taiga, Lada Vesta, Lada XRay, Lada Kalina, Lada Kalina Cross, Lada Largus, Lada Largus Cross,
Selection of tires and wheels for the car Lada KalinaUsing the automatic selection of tires and wheels for the car Lada Kalina, you can avoid a lot of problems associated with their compatibility and compliance with the recommendations of car manufacturers. This is due to the significant role that they play in ensuring a number of performance characteristics of any modern vehicle. In addition, tires and rims in a modern car are one of the elements of active safety. That is why the choice between them should be made as responsibly as possible, which implies the presence of a whole range of knowledge about these products. Unfortunately, or, conversely, fortunately, a significant part of motorists prefer not to study the technical device of their own car thoroughly. Regardless of this, the automatic selection system will be extremely useful, that is, it will minimize the likelihood of making the wrong decision when choosing certain tires and rims. And it is distinguished by its extreme diversity, due to the presence in the Mosavtoshina online store of a wide range of this type of product. |
mosautoshina.ru
wheel size per viburnum - Is it possible to put on the 13th radius of winter studded wheels on the Lada Kalina (sedan) instead of the native 14th radius? - 22 answers
In the Service, Maintenance, Tuning section, to the question Is it possible to put on the 13th radius of winter studded wheels on the Lada Kalina (sedan) instead of the native 14th radius? given by the author Ѝnzhe V. the best answer is there is no such thing - the radius of the wheel.. . the letter R in the marking means the direction of the cord - radial.. . and is it possible or not to glorify a disc with a diameter of 13 inches - you need to look at what diameter the brake discs and calipers are for .. . on the first viburnum they put it under the 13th ...
Answer from 2 answers[guru]
Hello! Here is a selection of topics with answers to your question: Is it possible to put on the 13th radius of winter studded wheels on the Lada Kalina (sedan) instead of the native 14th radius?
Answer from Artem Artem[guru] of course you can
Answer from Andrey Dikopolov[newbie] I have 8 years worth 13 winters.
Answer from Ldsk65[guru] can be 175.70.13
Answer from Ѓhty[guru] What wheels are suitable for Kalina?. The size of the wheels approved for operation on Lada Kalina Profile width / Profile height / Wheel rim diameter 175/70 / R13 (Attention !!! ONLY for Kalina produced before 2 half of 2007. For later releases 13 dimension may not be suitable due to the installed brake discs of a larger dimension) 175/65/R14185/60/R14 When installing wheels of these sizes, there is no need to make any structural changes to your Kalinka. These dimensions are recommended by AvtoVAZ. Some Kalinovods put wheels with a profile width of 195 and a disk diameter of 15 inches. But be prepared for the fact that when the car is heavily loaded, the rubber will touch the wheel arches, especially if you have fender liner installed. In addition, the operation of wheels that are not recommended for use increases the load on the suspension elements, and therefore their service life is reduced. What to choose specifically is a personal matter, based on the nature of the ride, the possibility of a wallet and personal preferences for appearance. Seating size PSD for Kalina 4 *98.Rim width J averages 5.5 inches. +/- 0.5 in. Wheel offset ET. Usually this indicator varies between 30-40. The landing size on the DIA hub for Kalina is 58.6. If you take a disk with a DIA greater than indicated, then you will need centering rings, which are usually sold where the disks are.
Answer from Yatiana Volchkova[newbie]
Answer from Eugene[guru] Money is everything you can
Answer from Rrr[guru] With the replacement of disks - YES!
Answer from Ekaterina Kuzmicheva[expert] most likely not))) if the brake discs cost 14 - which is most likely, then the 13th rollers simply will not fit
Answer from 2 answers[guru]
Hello! Here are some other threads with relevant answers:
Answer the question:
22oa.ru
Using the automatic selection of tires and wheels for the car VAZ Kalina, you can avoid many problems related to their compatibility and compliance with the recommendations of car manufacturers. This is due to the significant role that they play in ensuring a number of performance characteristics of any modern vehicle. In addition, one cannot fail to note the importance of tires and rims as elements of active safety. That is why their choice should be approached as responsibly as possible, that is, with knowledge of a number of parameters of these components.
Unfortunately, only a small part of car owners owns such technical nuances. Regardless of this, the automatic selection system will be extremely useful, that is, it will minimize the likelihood of making the wrong decision when choosing certain tires and rims. And he, thanks to the widest assortment presented in the Mosavtoshina online store, is very diverse.
Often, the owners of Lada Kalina ask themselves, what kind of wheels and tires are suitable for this car? In this case, the manufacturer provided an answer to such a question and compiled a list of possible options for installing different disk and tire options on Kalina. But, bolt pattern also plays a big role.
According to the manufacturer's data, three tire sizes can be installed on the Lada Kalina. It depends on the year of manufacture of the car. So, let's consider what are the options for installing tires on the Lada Kalina:
- The most common size option is - 175/70R13. This is the standard size of the Zhiguli tires, which takes its history from the Classic.
- The second most popular size on the Vase, but the most common on the Lada Kalina - 175/65R14.
- The third standard tire size option is − 185/65R15.
Standard wheels for Lada Kalina in LUX: 6.0×15 4*98 ET 35 dia58.6
All other tire sizes are non-standard and are not recommended for installation on Lada Kalina.
A visual table of the applicability of tires to Kalina
A visual table for selecting tire sizes for Lada Kalina
Disc size
There are two options for installing discs on Lada Kalina according to the technical documentation:
- 5.5x14
Wheel disk 5,5*14*98
- 6.5x15
Standard rim R15
Appearance on 15th disks
To install other discs, you will have to replace some parts of the suspension and control.
Razboltovka and possible options
Razboltovka is the fastening of the wheel to the hub using bolts or special studs. Simply put, this is the size of the car's "shoes".
Wheel disk for Kalina with bolt pattern 4 * 98
For all generations of Lada Kalina, the bolt pattern is standard 4x98, although there were experiments when some cars left the assembly line with a non-standard parameter - 4x100.
conclusions
When selecting tires and wheels Lada Kalina, all parameters should be taken into account. For proper installation, first, wheels with the appropriate size and bolt pattern are selected, and only tires for them. On the contrary, it will be much more difficult to search. Replacing wheels and tires is easy in the garage or at the tire shop. After installing new parts, alignment should be done to prevent increased wear.
When it is necessary to replace the disks with Kalina, the question arises which ones to choose - the same factory ones or not. Cast irons often look more attractive, updating the overall look of the car, but how practical is it? What should you pay attention to when choosing?
Characteristics of regular disks of different configurations
Models of the first generation of Kalina are equipped with products of 14 and 13 inches. The light-alloy version was released with a diameter of R14. With this reduced tire profile, it is also possible to install R15 (as they did in the sports version).
For all modifications of the first generation sedan, hatchback, station wagon, sport models produced in 2004–2013, the following dimensions were used:
- wheels 5J on 13 ET40, tires suitable for them - 175 / 70R13;
- 5.5J for 14 ET37 - 175/65R14;
- 6J on 14 ET37 - 185/60R14;
- 6.5J for 15 ET35 - 195/50R15;
- 6.5J for 16 ET45 - 195/45R16.
For all modifications of the hatchback, station wagon, cross, second generation sports (since 2014), the following types of disks and tires were installed:
- 5.5J on 14 ET35, tires - 175/65R14;
- 6J on 14 ET35 - 185/60R14;
- 6J for 15 ET35 - 185/55R15;
- 6.5J for 15 ET35 - 195/50R15;
- 6.5J for 16 ET35 - 195/45R16.
The Norm and Standard packages of the second generation do not have factory alloy wheels. In the luxury package, the buyer can choose cast R14 and R15.
Which disks can be changed factory
When products are purchased not from those offered by the manufacturer, the radius of the wheel should be taken into account, it should not differ much from the regular one. It is necessary to take into account the year of manufacture of the car and its equipment. The parameters of the wheels are absolutely independent of the shape of the body: whether it is a sedan, hatchback or station wagon.
When selecting discs for Kalina, you need to know the number of mounting holes and the diameter of the circumference of their placement (drilling, LZ * PCD) - 4 * 98. The diameter of the main hole must match the diameter of the vehicle hub (DIA) - 58.6. Departure values (ET) must be selected as recommended by the car manufacturer. Thus, for the first generation models 1117, 1118, 1119, wheels from R13 to R16 inches are suitable; width 5–6.5; ET 25–38; DIA 58.6; LZ*PCD 4*98. The following parameters are suitable for the second generation 2192 and 2194: R from 14 to 16; width from 5.5 to 6.5; ET from 25 to 35; DIA and LZ*PCD are similar.
Properly selected rims for a Kalina car mean safety on the road, reduced fuel consumption, and extended transmission life.
Steel or light alloy: which is better and why
Models are divided into two types according to the method of manufacturing. Steel (they are also called stampings) are distinguished by the fact that during production all parts are welded. This is a simple technology, so their price is low. The positive aspects of this option: the disks are easily restored even with deep deformations, they have high reliability, durability, repair is simple and budgetary. Negative aspects: difficulties in auto-balancing, increased weight, the same type of appearance (it is possible to modify it with caps or paint), low corrosion resistance.
Alloy products - modern and more popular, they include aluminum and magnesium alloys. According to the production method, they are divided into cast, forged, combined, titanium.
| View | Manufacturing | pros | Minuses |
| Cast. | The metal is poured into molds, then the frozen surface is treated. This production method makes the structure of the metal grainy. | Low weight. | During long-term operation in conditions of broken, bumpy roads, microcracks appear that can split the disc with a powerful blow. Repair is expensive, products are straightened on the machine. But after such a procedure, there is no guarantee of reliability during operation. |
| Forged. | Manufactured by hot forging. The texture of the metal becomes fibrous and durable. | Low weight and high strength. | Forged wheels are produced from aluminum or magnesium (luxury quality, stronger than aluminum, the price is much higher, made by prior order). |
| Combined. | Cast and forged parts are connected using special bolts. | To be repaired, and the rim can be replaced, and the central part can be left. | A considerable price, which provoked mass fakes - with decorative bolts. |
| Titanium. | Due to the large weight of the metal during manufacture, the thickness of the discs is reduced. | The most durable. | They have a high price. A small number of models are produced. |
When choosing cast specimens, you should pay attention to the metal that is part of the alloy: magnesium - lighter in weight, but with reduced strength; aluminum - less prone to cracking. So what products are most suitable for Lada Kalina ? Every driver strives for maximum safety on the road. When choosing discs, you should analyze the condition of the coatings on which the car will be operated, and your driving style.
Advantages of steel disks - in attractive cost. In addition, there is the possibility of recovery after deformation. Upon impact, they do not split, but are crushed, suspension and steering parts are minimally damaged.
Alloy wheels on Kalina have such advantages.
- A wide range of different models. Additionally, there is the possibility of painting.
- The low weight increases the dynamic parameters of the suspension, which improves driving safety.
- The best indicators of heat removal from brake units.
In Europe, alloy wheels are more popular. In the Russian market, due to the quality of the roads, most drivers choose steel or forged ones.
