Bitumen is a tar-like substance used in road construction. If the asphalt has not yet had time to harden or has melted under the influence of high temperature air, bitumen particles can get on the car body. Especially it concerns pavement Low quality, which contains too little crushed stone and a lot of bitumen. Bitumen forms black spots and stripes on the car, which eat into the paintwork of the car and look rather unaesthetic.
Important! Bituminous stains should be removed as quickly as possible, because after the first four hours it will become a difficult task. There is a danger that after their removal, light yellow stains form, especially noticeable on dark cars.
Precautions against bitumen
Prevention of bituminous deposits can be carried out in several ways:
- Road sections covered with fresh asphalt should be avoided or slowed down to 40-50 km/h.
- Avoid frequent steering on such unfavorable sections of the roadway, as this increases the likelihood of bitumen on wheel arches and sides of the car.
- Keep a distance of 1-2 m from other cars on the highway.
- Stay away from vehicles carrying hot bitumen.
- Cover the car with wax. It is much easier to remove bituminous stains from such a surface.
- stick on vulnerabilities a protective film that will protect your car not only from bitumen, but also from stones and other particles. Particularly susceptible to the appearance of bituminous spots are the sides of the car, disks, sills and wheel arches.
- Protect paintwork on a long period possible by covering it with a special liquid glass(five year warranty).
Means for bituminous stains on the car
Bituminous stains can be removed from the car body by means of two types:
- universal;
- special.
Universal cleaners contain alkaline components or alcohol in their composition. Their significant advantages:
- absence bad smell;
- Fire safety.
Usually universal means are made abroad. Such compositions are suitable for removing weak bituminous contaminants, traces of midges, bird droppings and stains of organic origin. If you try to remove a thick layer of bitumen with a universal remedy, it may not cope with the task or leave characteristic traces.
Special cleaners are produced using petroleum components. Their merits are as follows:
- able to completely dissolve abundant bitumen pollution;
- do not damage the paintwork.
Of the shortcomings, it is worth noting the need to observe precautions when using, since the products are flammable.
Attention! Special means are capable of destroying anti-corrosion coating. Therefore, make sure that it does not drip on parts of the machine where such a coating is.
You can still try to remove bitumen stains with aviation (refined) gasoline or kerosene, as well as white spirit, diesel fuel, acetone, butter or margarine. However, in this case, there is a high risk of damage to the varnish on the machine. If there was no other option, except improvised means, remove bituminous stains in parts, covering small fragments of the car surface, and make sure that there is no damage to the coating. Stains should not be rubbed, and the cleaning procedure may have to be repeated several times.
Consider the tests of several popular body cleaners for tar stains.
Doctor Wax
Body cleaner Doctor Wax is designed to remove traces of midges and bitumen from the car. Produced in the USA. When using, spray on the surface to be cleaned, and after 1 minute remove the dissolved dirt soft material. Testing of this tool showed that in order to obtain a stable result, the cleaning procedure must be repeated about three times.
Turtle Wax
concentrated preparation Turtle Wax not only dissolves various pollution, but also creates the effect of polishing the body. The product is easily held on vertical surfaces without dripping down. Produced in the UK. Such a tool removed bituminous stains from the car quickly and without much effort. It can be recommended as effective.
Liqui Moly
Aerosol cleaner Liqui Moly is designed to remove bitumen, tar, resin residues from the body and glass of the car, as well as from other surfaces. The product is safe for paintwork. Producer - Germany. The cleaner is applied to the contaminated fragment of the surface, wait 1-2 minutes and clean with a soft cloth. Not suitable for acrylic glass and polycarbonate surfaces.
Testing showed that even after the fourth application, bitumen stains were not completely removed.
VELV
Means for cleaning from bituminous stains "VELV" includes petroleum solvents in its composition. Qualitatively removes not only bitumen, but oil and grease stains, traces of insects. Safe for paintwork, rubber and plastic elements. Production - Russia.
Attention! For achievement maximum effect the temperature of the cylinder with the drug should not fall below +15 degrees.
Before using the product, the treated areas must be washed, and the bottle with the cleaner should be shaken. Then spray on the surface of the car and leave for 1-2 minutes. After that, carefully remove dirt with a rag. If necessary, cleaning can be repeated. After completion of the procedure, the treated surfaces must be wiped with a soft dry cloth.
In testing, the product removed bituminous stains quickly and effectively. A good option.
LAVR
LAVR cleaner with trigger Russian production designed to remove bitumen from various parts of the machine, including glass. The tool is suitable for varnish surfaces, it can be used to care for vinyl and armor protection coatings. Smells like kerosene.
First, dust and dirt should be removed from the surface of the car. To apply the product to the damaged area, use a sprayer or sponge. After 2-3 minutes, wipe the treated fragment with a soft cloth or rinse with water. If such a need arises, the cleaning procedure is repeated.
Drug testing showed high score the first time. Recommended.
Alternative ways to get rid of bitumen
You can remove bitumen from the car by performing a deep cleaning of the coating with one of the following preparations:
- synthetic clay (e.g. Soft 99 Japanese made);
- auto scrub (for example, the American Nanoskin).
Plasticine-like synthetic clay effectively cleans the surface of dried bitumen, tar, traces of midges, fine sand, leaving no scratches or damage.
Auto scrub is special systems for cleaning the body, which use advanced technology PolymerTechnology and qualitatively get rid of stubborn dirt.
Start removing bituminous stains as soon as you notice them. The sooner you start, the more likely you are to succeed.
Advice! Put the tar stain remover in the trunk and carry it with you just in case. So you can quickly start the fight against bituminous pollution.
The sequence of cleaning the surface of the car from bitumen is as follows:
- Before starting the procedure, it is worth washing the car. After washing, the bitumen will not disappear, but the machine will be qualitatively prepared for further processing. The washed car can not be wiped, as we will continue to rinse it with water.
- Try the tar cleaner of your choice on a small area of the car to make sure it doesn't damage the finish.
- We apply the selected product to the contaminated area and wait a few minutes until the stains get wet. Then carefully remove them with a sponge, soft cloth or brush. When using a brush, the chances of new scratches and other defects on the car are reduced. Try to treat stains by gradually removing each layer.
Important! In no case should you rub the cleaning agent with force, as this will cause new scratches on the car surface. Also, you should not try to scrape off the bitumen with a knife.
- After you have removed the bitumen, the machine should be rinsed with water to wash off any remaining solvent, otherwise it may adversely affect the coating of the machine.
- Wipe the car dry with a microfiber cloth for cars.
Advice! To minimize the effects of tar spots, polish and wax your vehicle. This will require additional cash costs, but the result is worth it.
This video clearly demonstrates how to quickly remove bituminous contamination from the surface of the machine:
Bituminous stains on the machine (both bitumen itself and yellow traces left after it) can be cleaned with various chemicals. However, when choosing them, you need to take care of several facts. Firstly, the product should not be harmful to the body paintwork. Secondly, it must be harmless to humans. Thirdly, its composition must be effective, and remove bituminous stains from the car as quickly and efficiently as possible. In addition, the car owner must know the technology for using a particular tool. We will talk about all this and much more with you further.
Definitions
Before we move on to a review of specific means, it is necessary to decide what kind of pollution we will fight. There are two types of them. The first is directly fresh. These are fresh pieces of bitumen that remain on the surface of the body after driving on molten asphalt. Their cleaning is easier, because in this case we are dealing with a fresh consistency. A wide variety of formulations are used for them, since a larger number of them cope with this task.
The second type - dried bitumen, due to which yellow spots are formed that remain on the body. They arise due to the fact that the bituminous composition for a long time was on the surface, and simply eaten into the paintwork. It is much more difficult to deal with this phenomenon, and not every tool is capable of this. Let's start our review with the first option.
How to remove bitumen stains
All means for removing bituminous stains are divided into two types - industrial and artisanal. In car dealerships you can currently find a large number of compositions based on the action of surfactants - surface-active substances. They also contain a small amount of alcohols (solvents). You can read how to remove bituminous stains from a car in the instructions for a specific product, which is on the label. As a rule, the way they are used is identical. You just need to apply the product to the contaminated surface and use a rag to get rid of the stain.
As a rag, it is best to use a microfiber cloth. It does not leave scratches on the body.
In some cases, you need to wait a little time in order to allow the composition to dissolve the dry bitumen. Liquid cleaning compounds are best applied to a cold surface of the body. This is due to the fact that if the body is hot, then the surfactants and alcohols that make up the liquid will quickly evaporate and will not have time to complete their task.
Also, in addition to rags, you can use a wooden or plastic spatula. With their help it is convenient to scrub the softened bitumen. However, you need to act carefully so as not to damage the paintwork.
There are many examples of such compositions. And in different regions of the country, the assortment may differ depending on local suppliers. We list the most popular and universal of them:
- LIQUI MOLY Teer Entferner;
- expert;
- "VELV";
- Cleaner with fresh citrus scent №7535;
- Turtle Wax;
- "Agate";
- others.
Remember that applying to the sidewalls of the body and thresholds hard wax, protective film or greatly facilitates the removal of bitumen and protects the paintwork of the body.
Before using any of the tar stain removers, be sure to wash the car body so that debris and dirt on it do not damage the surface to be treated.
How to remove dried bituminous stains from a car body
What should car owners do who did not immediately notice the appearance of bitumen on the body? How to clean bituminous stains on a car in this case? For this, there are special chemicals based on isopropyl alcohol. Examples of such liquids are:
- Cleaner with fresh citrus scent No. 7230, produced under the brand name Dinitrol (Sweden).
- Teer Entferner from Henkel Teroson (Germany).
These products are applied to a chilled surface to prevent the alcohol from evaporating too quickly. The peculiarity of the use is that it is necessary to give some time for the bitumen to dissolve under the influence of the composition. In particularly difficult cases, the wetting and rubbing procedure will need to be carried out several times.
It is necessary to work with such products very carefully and try not to inhale their fumes, since isopropyl alcohol is harmful to the human body. It is desirable to work in rubber gloves and a paint respirator, an ordinary military one will not work.
You can also wipe off old bituminous stains on the machine using well-known and common liquids:
- kerosene;
- solvent;
- white spirit;
- gasoline (including "galoshes");
- diesel fuel;
- brake fluid;
- WD-40.
As for kerosene, it is desirable to use pure aviation kerosene. Solvent and "galoshes" are very effective in dissolving the bitumen, but it is often necessary to allow some time for the process. However, if the paintwork of your car is damaged, then better gasoline and do not use solvent, as they can seep through the varnish to the paint and break it. Works well for cleaning White Spirit. It is neutral to paintwork, and perfectly washes even dried bitumen.
Using WD-40 to Remove Tar Stains
Let's take a closer look at WD-40 and brake fluid. The main component of the composition of WD-40 is white spirit (about 50%). Accordingly, some motorists use it to remove bituminous stains. However, it should be noted that it is effective only for fresh contamination. If you missed the moment, and the bitumen has dried up, then with the help of WD-40 you can no longer wash it off, you need to use stronger means.
As for the brake fluid, here you need to know its composition. After all modern facilities are based on polyglycols and their esters. Therefore, they are more neutral to paintwork, and fluids that are DOT-4 and higher should be used. And the composition of older liquids includes butyl alcohol, which is very aggressive to paints and varnishes.
Even before the complete drying of all the above compositions on the surface of the body, it must be thoroughly washed with water and car shampoo.
It is necessary to work with the listed in this section very carefully. And in this case, we are talking not only about personal safety measures (they must be observed by themselves), but also about their impact on the paintwork of the body. After all, the aggressive substances that make up their composition can disrupt the paintwork of the body, especially if it even has minor damage. In addition, washing the surface will avoid the appearance of stains and greasy spots on it. And after washing with shampoo, it is recommended to apply a polish to the place where the work was done. It will give the surface its former shine.
Remember that most of the products listed above are flammable. So follow the rules fire safety during work.
In the event that none of the listed compositions can cope with the yellow spots that have appeared and dried bitumen, then the only solution in this case remains professional polishing . Please note that it is better suited for regular, rather than metallic paints.
Do not use vinegar as a cleaner. It damages the lacquer and can cause browning or dull spots on the surface of the bodywork.
Folk methods how to remove bitumen from the body
If for some reason you cannot or do not want to use industrial stain removers, there are several "folk" remedies. Among them:
- Margarine. It is better to apply it on an unheated surface of the body so that it spreads over it. The cleaning process itself is similar to that described above. You just need to use a rag to remove bituminous stains from the car.
- Wet wipes. In this case, it is only antiseptic wet wipes(for cleaning, their children's, refreshing, deodorizing counterparts, as well as wipes for removing makeup, are not suitable). The composition of the liquid that moistens antiseptic wipes includes a small amount of alcohol and surfactant. They act in a similar way to industrial products that can be used to remove bituminous stains on a car.
- Vegetable oil. It can be used similarly to margarine. However, it can only remove very fresh and small stains.
- Clay. Its composition, mixed with water, is able to wipe off even dried bitumen from the car body. Before cleaning, it is necessary to take and knead the clay well. And in the process of work, water it.
However, in this case, you need to understand that the listed funds are able to cope only with fresh bitumen and in a small amount. They are not suitable for dried compositions and a large area of \u200b\u200bcontamination.
The best remedy for bitumen
Today, there are a huge number of means for cleaning cars from bitumen. Therefore, there is no unambiguous answer to the question of which tool is better, and cannot be. The choice should be based on the following factors:
- The degree of contamination of the body. If your car got a small amount of bitumen (for example, a few points) and you noticed them in time, then you will surely get by. little blood". In this case, you can use "folk" or homemade products (kerosene, gasoline, diesel fuel, white spirit or napkins). Otherwise, industrial means are indispensable.
- The cost of funds. If you do not want to overpay a lot of money, then use the described "folk" methods (margarine, vegetable oil, wet wipes). In case of minor contamination, they will certainly help you.
- Availability in stores. Despite the fact that at present there is no shortage, nevertheless, the assortment of goods in stores is formed wholesale suppliers. Therefore, it is often possible to see a situation where in different regions countries are represented by various means. Accordingly, car owners are forced to use those that are on the shelves.
- Composition and effect on the paintwork. Special industrial means for removing bitumen from the car body are a priori neutral to its paintwork. But artisanal compounds can be dangerous for him. This is especially true for various solvents. Therefore, when choosing one or another means, consider the information given in our article. And also do not forget after using homemade products to wash the surface of the car with shampoo before the product has dried. It is also desirable to use polishing afterwards.
Removing bituminous stains with white spirit
But as practice shows, it is better to choose compositions based on kerosene and white spirit. These two bases do an excellent job of cleaning any bituminous stains. You can also use them in their pure form, because they are inexpensive and work effectively.
Removing bitumen stains from a car body is within the power of any driver. There is currently whole line professional and homemade means for this. However, as you know, prevention is best repair. The road with molten bitumen in the summer is visible to the naked eye. Therefore, when moving along it, adhere to the following simple rules:
- do not exceed the speed above 50 km/h;
- perform the minimum number of maneuvers, because when turning the wheels, pieces of bitumen scatter at a high degree;
- try to go beyond the edge of the rolled track, because the asphalt melts faster on it, which means that the probability of bitumen flying out is higher;
- keep a good distance from the trucks in front, especially if they do not have mudguards.
But even if bitumen gets on the car body, now you know how to wash bitumen stains from a car. Just try carry out the cleaning procedure as soon as possible after the appearance of pollution. This will allow you to greatly facilitate the washing process, and it will also increase the likelihood that the body paintwork will not receive significant damage in the form of yellow spots.
Bitumen stains on a car body are evil. Washing does not take them, and you should not leave them for a long time. But how to remove? Solvents cannot be used, but more gentle petroleum solvents (non-fractions) are already acceptable. What about regular gasoline? Will WD40 work? Or maybe special remedy head and shoulders above the rest of the "chemistry"? In general, we decided to test the effectiveness of various tools, both specialized and universal, and this is what came of it.
For clarity, we use one uniformly contaminated body element, different parts of which will be processed by different means.
First of all, we carefully wash off dirt and sand from the threshold so that during further cleaning, small particles do not turn into an abrasive.
And let's not forget about ecology: pour "chemistry" on the ground bad manners, so we lay rubber mat, then all the "slurry" will be poured into a closed container and ... But this is a topic for a separate discussion.
Special cleaner
They decided to start the tests with a profile cleaner, designed just to eliminate bituminous stains. The first product that came on sale turned out to be of Belarusian production, in its composition - a hydrocarbon solvent, isopropyl alcohol and nonionic surfactants. The bottle is equipped with a convenient sprayer - we used it when testing other products.
So, in accordance with the instructions, shake the bottle, spray the product onto the surface and after 5-10 seconds clean it with a soft cloth. At first, the effect is not very noticeable ...
But it is worth repeating the procedure two or three times - and with the exception of the largest stains, all contaminants are easily removed. Overall, not bad. But how will universal remedies show themselves?
WD40
Many people are skeptical about the use of "Vedashki" as a cleaner. But let's look at its composition: 50% - white spirit gasoline solvent, 25% - propellant, carbon dioxide, 15% - mineral oil, 10% - inert ingredients. That is, half of this is the same "White spirit", which is considered one of the most effective means in the fight against bituminous spots. So WD40 should work. But how effective?
And everything is very good! WD40 coped with bituminous stains no worse than special equipment. At least we did not notice much difference in efficiency and speed.
Purifier intake tract
His participation in this trial is explained by the following logic: the purifier removes carbon deposits, in theory, and should cope with bitumen. It contains petroleum distillates, toluine and ximin. But tormented by vague doubts about his aggressiveness towards the paintwork?
There was a problem with the application of the product: the regular sprayer did not work. I had to moisten a napkin with it and wash the stains with it, which generally reduced the effectiveness.
Overall impression: the cleaner works, although a little worse than other products. And if there is nothing else at hand, it will do just fine. We did not see a visible effect on the paintwork, but just in case, we quickly washed off this "chemistry" with water.
Petrol
God forbid you remove stains with solvents! But you can try gasoline, especially if there are no other means at hand. True, it should be used with caution: the coating may become cloudy, in which case polishing will be required. In addition, gasoline evaporates very quickly, so that its exposure to the surface is minimized, which affects efficiency.
And the result, frankly, is so-so. Perhaps gasoline turned out to be the least effective, despite the fact that this is far from the safest means for paintwork. Hence the conclusion: use only in case of emergency.
"White Spirit"
And here he is, our potential leader. At least it is this solvent gasoline that is most often recommended for removing all kinds of contaminants as very effective, but at the same time harmless to LKP remedy. Let's check!
Indeed, stains are removed quite easily and quickly. In terms of cleaning speed, "White Spirit" seems to be ahead of even a special tool! But inferior to him in terms of ease of use. In addition, the average user is unlikely to like the characteristic smell, in fact, as is the case with WD40.
"Galosh Gasoline"
Finally, we decided to try Gasoline Galosh Nefras C2-80/120. This remedy With octane rating about 52 units belong to the group of solvent gasolines and, in theory, should be much more gentle on the paintwork than high octane gasoline.
This nefras works with approximately the same efficiency as White Spirit, we did not find much difference between the products.
Summing up
A special tool for cleaning bituminous stains is not only effective, but thanks to the spray gun it is also convenient to use. Add to this the absence of a smell characteristic of nefras - we get a product that is quite pleasant for the average user. The only question is, is it worth buying it, if universal remedies that probably already exist on the farm do just as well with bituminous stains?
In this regard, WD40 asks for the first place - this is truly a tool for all occasions! Yes, pure White Spirit copes even better with bituminous stains, but the range of its application is noticeably narrower, so it does not roll around in every second trunk. Nevertheless, as a solvent cleaner, it is quite versatile. The same can be said about the "Galosh Gasoline" tool.
Gasoline and intake tract cleaner are outsiders. And they are not coping with the task in the best way, and there are questions about the aggressiveness towards the paintwork. And if gasoline can still be considered when there are no other means, then a cleaner - well, what's the point? After all, as we have seen, there are plenty of effective and safe means for removing bituminous stains.
True, it may happen that after them large stubborn stains remain. The convex part can be carefully cut with a blade, the rest can be soaked with "chemistry" and gradually erased. Well, in a good way, no matter what tool you use, it would be nice to clean the cleaned element by soft polishing - this way you protect the coating from new attacks from an aggressive environment.
The operation of the machine involves not only the movement on it. It is also a process that provides for the care of all parts and systems. It starts with service. interior decoration, which consists in cleaning and polishing the interior. This ritual also applies to such components as the engine, air conditioning unit, cooling system, etc. For some reason, it is customary to pay a minimum of attention to the body. While this part is priceless, it cannot be replaced.
We note how to remove tar and bitumen from a car without harming the paintwork
One of the annoying problems for owners of brand new cars and not only problems is black dots on the surface of the paint. But it's still half the trouble. That's what really brings significant trouble in the life of drivers, so it's poplar buds. They eat into the paintwork much deeper than road bitumen. It is impossible not to notice them - the size and density of the affected areas are quite impressive. The only way out is to fight. The sooner you start taking action, the better.Before removing the resin from the car, it is worth familiarizing yourself with the features of this process. For its implementation, you will need a special tool. This is where the brainstorming begins. Let's simplify the task - there are two classes of drugs:
- Universal "folk".
- Company special.
Efficiency is almost on the same level. But this is only under one condition - the deposits are fresh, that is, they are on the surface of the body for no more than 3-5 days. With older inclusions, each composition fights differently.
As in the case with
, in addition to special equipment, you will need microfiber. It is she who is able to remove resin deposits without scratching the paintwork. For folk remedies, additional devices are useful.
We clarify how to remove poplar and road resin from the car: branded detergents and reviews about them
A simple car wash, even with warm water, is indispensable. It will wash away road dust and dirt, but it will only highlight tarry areas, nothing more. Even strong chemical-based products do not always do their job the first time. And no matter whose production they are - domestic or imported.
A detailed analysis of reviews shows that not every product is worth paying attention to. No, tests confirm the ability of each drug to clean, but not many people do it properly. Respect is the products of such companies: 
- Astrohim (Russia).
- Hi-Gear (USA).
- Texon (Russian Federation).
- Doctor Wax (USA).
- Grass (Russia).
- Prestone (USA).
- Autoprofi (Russian Federation).
- Abro (United States of America).
It is noteworthy that half of the TOP is occupied by Russian models. Moreover, the price for them does not exceed 200 rubles. Foreign analogues will cost at least 250 rubles. The price difference is purely marketing. The functionality is about the same level.
Toyota RAV4 owner Vladimir A. was interested in how to remove poplar resin from the car for a long time, and decided to stop at the Astrohim product. The bottom line is this:
“Always used alcohol, but on new typewriter did not dare to use it. I bought a domestic product, sprayed it on the trail of a poplar bud, waited 3 minutes, as the instructions say. The action of the remedy pleased, but a small trace still remained. I decided to repeat the processing cycle. The second time it really went away. This is given that the stain was clearly not fresh. Pleased with the aroma - unobtrusive.
Where are the Germans?
Curious motorists must have noticed that there is not a single German cleaner in the ranking. They are excluded because of the satisfactory quality of cleaning. This is despite the fact that their price is high.
Car owners tested Liqui Moly, Sonax, Pingo. Even well-deserved editions included them in the tests. These quick-acting drugs - puff and wipe immediately. Therefore, they can only do fresh bitumen "blots". They can be washed with the same success by the well-known assistant - WD-40.
How and how to wash off poplar resin and road bitumen from a car: the budget sector
Usually the owners of new cars on folk methods trying not to bet. On the one hand, the fears are understandable - the degree of aggressiveness of the drugs has not been confirmed in any way, so it is difficult to predict the behavior of the LCP in response to the use of the same alcohol. However, many talk about the unsurpassed effectiveness of the available liquids.
- Turpentine.
- Alcohol.
- White Spirit.
- Petrol.
They are no more difficult to use than , but this should be done carefully. First, it is worth conducting a test, the purpose of which is to determine how the agent acts on the paintwork after a long exposure. A test operation is usually performed in an inconspicuous place.
Classic
When asked how to wash poplar resin from a car, a good answer would be to use traditional ethyl alcohol or turpentine. These two drugs confidently remove stains that have arisen on the paintwork for a long time. After applying the composition, the acidification procedure follows, which lasts about 2-5 minutes.
It is more convenient to apply gasoline or white spirit with a spray gun. They should be kept for no more than 3 minutes. Then the place is wiped with microfiber.
Cotton pads are useful for applying turpentine or alcohol. By the way, it is not necessary to purchase a pure alcohol liquid. Hand sanitizer or wet wipes will do just fine. Good results are also shown by ordinary ammonia.
Let's summarize
There are a lot of preparations in order to wipe the resin from the car. It is safer to use proprietary products. But this must be done strictly according to the instructions. Among store offers, Abro, Hi-Gear, Prestone, Doctor Wax, Autoprofi, Texon, Astrohim, Grass proved to be effective.
Folk methods for washing bitumen and poplar resin are not inferior to the "branded" ones, and sometimes even surpass them. Available liquids include turpentine, alcohol, gasoline, white spirit. The first couple is the most productive.
» Bitumen by car, how to wash bitumen stains
Today, almost every car owner is faced with topical issue removal of bituminous stains from the machine. This issue becomes very relevant in summer period the year when the road is actively being repaired.
Once on a section of the road that is being repaired, you have to overcome some distance along a sticky bituminous coating. As a result, black spots from the road surface appear on various parts of the body. Therefore, resin removal is carried out from various surfaces.
To avoid the situation of removing bitumen from the surface of the car, first of all, you should refuse to travel on asphalt roads))). If it is impossible to move along the city streets, it is practically impossible to move by car without removing bituminous stains from the arches and fenders of the car.
Removing bituminous stains from a car body
The most optimal solution is to eliminate the bituminous stains that have appeared immediately, until the resin composition is completely dry. For this purpose, it is necessary to purchase a remedy for removing tar stains. As a rule, these substances are sold in the form of a spray, in stores automotive chemistry. However, all bitumen can be easily removed with gasoline, which is always on hand or at gas stations.
It is highly undesirable to remove road bitumen from the car paintwork. mechanically, in which you can very easily damage the paintwork of the car and scratch the polish. To do this, it is best to use the solvent repeatedly until the desired result is obtained. IN without fail work surface wash with a special car shampoo, then wipe dry from all small contaminants and, if possible, polish a little.
If it’s a burden for you to take care of your car and you are generally far from washing bitumen stains on your car, but of course you want to get rid of it, in this case you can just come to the car wash and ask to degrease the body and remove all the bitumen.
Video how to remove bitumen from a car
Removal of bitumen from textiles
If drops of bitumen get on the surface of the clothes, it is best to wait until it hardens, only then take it off. This will leave a dark spot on the fabric. In order to completely eliminate it from the surface of matter, it is mandatory to wash the thing in powder, which contains granular active oxygen.
If bitumen gets on thinner and more delicate fabrics, it is necessary to use low-octane gasoline for cleaning, as well as special formulations solvents positioned as bituminous. In case of careless handling chemical compounds ugly stains or texture destruction may appear.
How to paint a car with your own hands - video 
If the windows in the car are sweating - what to do and what are the reasons. 
Peugeot 308 - disadvantages and reviews of the owners of the new model 
Painting a car with liquid rubber, all the pros and cons Vibration of a car, how to get rid of vibration on the body
