On September 12, 2017, Apple presented a large number of new products in the IT industry, one of which is the iPhone 8, formerly the iPhone 7. preliminary price for a smartphone is more than 60,000 rubles. As a rule, the cost of replacing the display on flagships ranges from 30 to 50% of the cost of the repaired sample. We advise you to protect the smartphone display from mechanical damage, using an accessory that is designed and manufactured to the exact dimensions of the phone.
And so, we will conduct a preliminary analysis, which completely covers the smartphone screen. The glass is made using 3D technology. The manufacturer of the accessory is Benks. There are at least 5 series of tempered glass for iPhone 7/8, you can read more about them in the blog of our online store.
The company made three major innovations that affected the protective glass on the iPhone 7/8:
- - The polymer composition of the edging frame has been developed to strengthen the structure of the glass edge
- - Non-rising frame
Quite often on the net you can find negative feedback users associated with the simultaneous use protective glasses and bumpers, cases, covers that lifted the edges of the glass due to untimely peeling of the adhesive base. The Banks company solved the problem by using quality materials.
- - Lack of air under the glass
Let's analyze each of the points in detail.
-Reinforced glass structure
With a commensurate physical effort that will be applied to the edge of the protective glass, its state will not change. This only says that you can forever forget about the broken edges of the glass, which were previously found in other manufacturers of smartphone accessories.
Epoxy resin in high-quality ABS plastic, gives incredible hardness and flexibility to the contour frame of the protective glass.
-High quality adhesive base
The adhesive layer was developed by the Japanese laboratory of adhesive materials. In particular, the entire composition of the adhesive base accounts for about 80% of silicone spraying. Japanese materials renowned for their long service life. Due to the strong adhesive adhesion of the protective glass to the smartphone, covers and bumpers will not be able to lift the edges of the glass during its operation.
-Anti-air layer.
One of the layers that is part of the protective glass for iPhone 7/8 is: No-bubbles - layer, literally means - a layer without bubbles. This property is typical for glasses that are produced using 3D technology, because. it is when gluing such glass that air gaps are encountered, but not in the case of Benks.
When self-gluing, we advise you to use the company's instructions in Russian, about: ""
Please note that protective glasses for iPhone 7/8 are significantly different from protective glasses for iPhone 6. We are often asked the question: "Does the protective glass from iphone 6 fit on iphone 7?" That is why, especially for you, we have written a small one that will help you figure out and understand the main differences between protective glasses for iPhone 7/8 and 6.
Six benefits that can be found in the use of protective glass
1. The surface of the glass is polished with high quality and precision grinding equipment. This made it possible to achieve high values roughness. Fingers on such glass glide much faster and more pleasantly than on their own.
2. Oleophobic coating
Oleophobic coating is of great importance if you use your smartphone to view professional photos or videos, play action games. IN this case, fingerprints or small dirt that remains on the surface of the protective glass can be easily removed with one hand movement.
3. Hydrophobic film
We won't go into details about what the wettability angle of a water droplet is, we'll just say that for protective glasses from Banks, this angle is less than 60 degrees. At a wettability angle of ≤90ᵒ, liquid drops do not spread over the entire surface of the screen, but are collected in regular ellipses.
4. AGS glass of increased hardness
The protective glass on the iPhone 7/8 has a hardness rating of 9H. Due to the increased hardness, the glass will reliably protect the screen of your flagship from scratches and chips. The company informs buyers about the duration of operation of the protective glass for more than 180 days. Which protective glass is better for iPhone 7/8 is up to you. We offer quality and reliable option from company Benks
5. High-quality adhesive base
The process of sticking a protective glass on an iPhone 7/8 is quite simple. Thanks to the use of high-quality adhesive materials, you just need to press your finger on the center of the screen and the glass will automatically stick. We advise you to familiarize yourself with detailed instructions how to install 3d glass on iphone 6
6. Glass tempering
Dropping a smartphone onto an unprotected screen from a small height will lead to the appearance of cracks of various kinds. Using an accessory such as protective glass, the likelihood of cracks and chips on the screen after a fall is minimized.
Glass from the Benks company is subjected to tempering in high-temperature furnaces for 4-6 hours. Temperature treatment gives glass strength and hardness.
Banks has patented a set of accessories that comes with protective glass. For the convenience of gluing, we advise you to use all the tools shown in the photo, having studied the installation instructions in advance.
The kit contains:
- 1. Wet wipe
- 2.Microfiber cloth
- 3.Large dust absorber
- 4.Stickers
The KR+Pro 3D series is available in three color options: pink, white and black. How to stick a protective glass on an iPhone 7/8, ours will help you figure this out.
You can buy protective glass for iPhone 7/8 3D in our online store Benks-Shop
Details Created: 16 September 2016 Updated: November 18, 2017It's not so offensive to shell out a tidy sum for the gadget itself, how much to spend the equivalent of hundreds of dollars to repair an accidentally but terribly scratched display. Relatively cheap protective films have helped to save a lot of nerve cells, but glass production technologies for smartphone screens do not stand still. On the contrary, it will soon become more profitable to get rid of protectors - in some cases.
In contact with
The famous protective glass, for example, and each new one is more perfect than the previous one, and thoroughly. For example, the scratch resistance of the 3rd version is 40% higher than that of the 2nd. And it is worth noting that the tempered glass was deliberately scratched with diamond drills, on a laboratory stand - this cannot be compared with accidental contact with a ring on a lady's little finger.
The company guarantees, documented, that products made of soft metals and alloys, including low-grade steel of a kitchen knife, are not terrible. And the 3rd generation is not the last, technologies will continue to develop further, which is exemplified by the unprecedented. So why not support those who contribute scientific and technological progress, and not those who increase the amount of plastic waste on the still beautiful face of the planet? As they say, vote with your money - buy smartphones with an integrated protective glass, not accessories for them.
Paradoxically, while there is no protector, scratches cannot be seen either, and after installing what should protect them, they appear, as if by someone's malicious intent. Perhaps this is so, because the philosophy of trading in goods subject to too frequent replacement, alas, but dominates in the modern consumer society. However, even if we ignore the conspiracy theory of industrialists, the problem is still on the face - the face of a smartphone, which, in the presence of a film, will often be covered with scars. 
The secret is that soft plastic is easier to damage, even than ordinary, strained glass, and therefore he suffers more often. And those collisions with keys and coins in your pocket, which pass without a trace for the original coating, do not affect the plastic protection in the best way. Everything is fair, the iPhone itself remains in order, and the damaged “armor” can be peeled off and a new one installed. But there is a catch, doesn't it?
No matter how many zeros after the decimal point the manufacturers write in the “film thickness” column, the external protector a priori has certain dimensions. And the higher the protective properties, the more massive they are - dynamic armor for electronic gadgets, unlike military equipment until invented. Yes, the material of the film conducts electricity, but it still remains a layer between the finger and touch screen. Do you like to play games that require excellent reaction and precise movements? Don't be offended if you start to lose more often than usual, because the usual sense of contact is slightly spoiled.
Plastic is affected by ultraviolet radiation, bacteria, radiation, human body fumes and other factors that our senses cannot detect. Simply put, it wears out not only from obvious mechanical damage, and this affects the visual component of the coating. Not only will it look ugly itself, but the picture on the screen will also have to pass through the new-found filter. Of course, over and over again, over the years.
A false sense of security, perhaps, could be put in the first place, but fortunately for mankind there are not very many fans of the Darwin Prize in the world. The golden sand of the beach, crumbling between the fingers, cannot be compared with sandblasting, but for electronics, a visit to the sea is like an excursion into a torture chamber. After all, there is water, salty, plus heat and light alcoholic drinks, which adversely affect the self-control of the owner with a natural result for gadgets. 
The film, surprisingly, does not protect the smartphone case from impacts, even the screen itself does not cover it. Scratches, please, but what if the neighbor's pug decides to try it on the tooth? About extreme travel through the back streets of the vast motherland, it is worth mentioning separately. Even if the packaging says “sealed” and “oleophobic”, after a forced swim in a stream, the gadget will most likely need resuscitation. And there is nothing to blame on the film - the naive person is to blame.
In a good way, if you want to protect the device from aggressive close contacts with outside world, it . A half-measure in the form of a film on the screen certainly helps to emphasize the aesthetic appeal of an expensive smartphone. But it leaves the back and sides of the device vulnerable, which are also at risk, especially if a self-confident person decides that an accessory worth a dozen dollars can make the gadget invulnerable.
Speak protective film for iPhone 7 - redneck, ugliness and indelible shame?! Well, we would not be so harsh in our statement, although the presence of a film and its impact on the design of the phone can be stressful on a psychological level. However, let's turn on the brain, turning off emotions accordingly - the screen is receptive. Dot. The authoritative editor of the TechCrunch profile publication Matthew Pantsarino will not let you lie - after the presentation and wearing the iPhone 7 in your pocket, what your mother gave birth to, a week later the expert posted a photo of the gadget, on which scratches were clearly visible. In general, we propose to talk in more detail whether a protective film is needed new iPhone 7.
Yes, Apple protects its gadgets in every possible way, equipping them with high-tech security solutions. Yes, the hardness of iPhone 7 displays in accordance with the Mohs scale shows 6 out of 10 possible. Yes, the opinion that they disfigure them has a right to exist (even if it is shared by certain, and not all, user groups).
BUT! Guys, the display is covered with micro-scratches literally immediately, after a couple of weeks. Even if nothing but his hands touches him. It is unrealistic to explain how, it is worth accepting as a fact. This will be confirmed by any iPhone crash testers and enthusiasts of finding flaws in the work of Apple, well, or authoritative experts like Pantsarino. However, film opponents argue that there is no reason to fit a phone with a protector if the purchase was motivated by its design aesthetic. Say, stand in a row with remote controls in cellophane. “And maybe buy a cover for a cover ?!”
However, the list of key reasons for their “against” includes the following:
- do not cover the entire screen. 7-ka, like 6-ka and others like them, has rounded edges of the screen glass, which calls into question the effective use of the film - most of them do not cover the entire display area. This deprives the pleasure of smooth transitions from the body to the screen, affects the comfort of tactile sensations when swiping to the side.
- low degree of protection. The film is not able to provide protection against serious damage, only from the smallest scratches, which may arise from contact with a plastic card or other "little thing" (by the way, a trifle in the form of a penny will pretty scratch!).
- reduced screen sensitivity.
Now let's name the top arguments in favor of a positive answer to the question of whether it is necessary to glue iPhone film 7:
- cover the entire screen. Yes, such models have been on the market for a long time - full screen, without the slightest gap on which dirt can accumulate. Super thin, so extremely flexible. The main thing here is to choose a high-quality model based on resistant, but elastic silicone, and then no corners will peel off.
- additional protection. Along with protection against scratches, films prevent the accumulation of dust and grease on the screen - agree, it's more pleasant to look at the screen if there are not 100,500 fingerprints on it.
- increases screen life. Providing a certain degree of screen protection, leaving it in original form, the film significantly increases its mileage.
- leaves a chance for bargain sale. If you decide to sell the gadget soon, it will be more profitable to do this if the screen is not scratched by time.
In general, that's all. There is no philosophy in the question - you just need to decide for yourself how important basic protection is to you.
And it remains for us to remind you that in the Megabite assortment there are many models of films that ideally match the display of the 7th iPhone in size and shape. Well, and purely our opinion - the thinnest quality film looks great with stylish transparent silicone bumpers. To be completely accurate, it is absolutely imperceptible.
