When driving along busy city streets or along the highway somewhere in the fields, visibility should always be maximum. Without this, the probability of an accident increases dramatically, and it is not known what the outcome will be. In order for a motorist to see a car moving towards him, even in a snowfall or in a downpour, windshield wipers are installed in cars. From the name it becomes clear that this mechanism designed to remove dirt, snow and water drops from the windshield of a vehicle. It is very important not to leave this detail unattended, to carry out regular check wipers, take care of them and, if necessary, change components. More on this later in the article.
Some car owners somewhat underestimate the role normal operation wipers in ensuring the safety of driving a vehicle. Many of them take a big risk saving on their timely replacement and paying little attention to their condition, as well as how efficiently they work. But high-quality wiper blades are an important component of road safety. Remember, if the windshield wipers are not working properly, you should without fail change them for new ones. As a result of poor glass cleaning, visibility and visibility of the road can be extremely low, which often leads to accidents.
Wiper blades why do they wear out quickly
Often, motorists ask why wiper blades wear out so quickly. Of course, this primarily depends on the model, brand and quality of the windshield wipers. However, unfortunately, even the most reliable and expensive brushes, if certain operating rules are not followed, can lose their effectiveness in the shortest possible time. To extend the service life car windshield wipers certain guidelines must be followed.
Clean windshield, how cleanliness affects the life of the wiper blades
Clean glass will give you the opportunity to significantly increase the life of the wiper blades. The problem is that dirty glass causes premature wear of the brushes. Even if the weather is rainy, you need to keep clean front glass. Do not think that the rain will wash away the dirt on its own.
In dry weather, the condition of the windshield also needs to be paid attention. In any case, the glass must be wiped from dirt, because if you accidentally touch the wiper control knob, this may damage the rubber bands of the brushes. When you turn on the wipers in dry weather (if there is dirt on the glass), the soft rubber bands of the brushes can be damaged and lose their properties in a short time.
Auto glass cleaners to help the driver
If the glass becomes dirty while driving, and the windshield washer fluid, along with the included wipers, does not cope with its task, it is advisable to stop at the nearest store or gas station to clean the windshield. To thoroughly remove dirt, use special fluid for auto glass cleaning. With help this tool you can easily and fairly quickly remove dirt without streaks.
How to monitor the condition of the windshield in the cold season
For sure in winter period you have often noticed in the yard, in the parking lot or on the road cars with clean, but icy windows. Many drivers mistakenly turn on their wipers in winter to clear ice and snow. At this time, most often, the soft rubber blades of the brushes are damaged. Remember, for serious damage to the windshield wipers, it is enough to turn them on. winter time in the presence of ice and snow only once.
Therefore, always clean the ice and snow off the glass by hand before driving in winter. To avoid the appearance of ice on the glass, after parking the car, be sure to wipe it in the evening Windshield moisture from melting snow. Following this recommendation, you can increase the service life of the brushes several times.
How to clean wiper blades and rubber bands
Many car owners do not know that wiper blades also need systematic cleaning. During the operation of the windshield wipers, plaque forms on the brushes over time. Because of this, they no longer adhere to the glass as they should, and the rubber bands of the wipers lose their softness. When using dirty brushes, the coefficient of friction increases, and this ultimately leads to premature wear of the surface of the wiper rubbers.
To clean the brushes from dirt, wet them plain water or windshield wiper fluid. Then clean the rubber bands and brushes from contamination. Be careful not to damage the rubber wiper blade. This is done with a paper towel or rag. The cleaning process should continue until the paper towel or rag slides easily over the surface.
After cleaning, you will see that the towel has turned black. This means that the brushes have already been cleaned of dirt. You should not try to make the cloth completely clean when cleaning, because the brush itself can stain the rag. If you wipe the brushes for a very long time, you can damage their rubber bands.
Improvised consumables for the care of the windshield and wiper blades
- Paper towel or clean cloth.
- Wiper fluid.
It is worth noting that ultraviolet radiation also negatively affects the rubber of the wipers - the rubber cracks very quickly in the sun. To cope with such tests can only really quality rubber. When choosing brushes, it is advisable to take a closer look at the manufacturers supplying products for the kit. expensive foreign cars. These are Valeo, Champion, Bosch. Their cost is higher, but the quality justifies it.
How to find and order new high-quality wiper blades on Aliexpress at a reasonable price and free shipping
- First of all, you should register on the site.
- Then sign in to your profile and fill in your shipping address.
- Next, enter in the search box the name of the product you are looking for, that is, the wiper blades.
- Select items with free shipping.
- It is better to sort the results by the rating of the seller, because if the seller has a normal rating, then his product is of high quality and the price is acceptable.
- On the product description page, select the desired length and quantity.
- Next, click on the "Buy Now" icon.
- Now it remains only to pay for the order.
Remember that if the windshield wipers on your car do not do their job properly and properly, then you should definitely change them for new ones. Due to poor glass cleaning, visibility and visibility of the road can be very low, which can lead you (drivers) to an accident.
We are often asked why wiper blades wear out so quickly. (?) First of all, it certainly depends on the brand, model and quality of the wipers themselves. But to our regret, even the most expensive and most reliable brushes, if certain rules for their operation are not followed, can also become completely ineffective in a very short time. So how then to be, how to extend the service life car wipers? In fact, friends, everything is quite simple. You just need to follow certain recommendations prescribed in the instructions, and then you can significantly increase the durability of your car brushes. Here are the recommendations.
1) Keep your windshield clean.
A clean windshield will help significantly increase the life of your car brushes. The point here is this, just dirty auto glass quickly leads the brushes to premature wear. Even in rainy weather, you must keep your windshield clean. If you friends think that the rain itself will wash away the dirt on its own from the glass, then this is not entirely true, it’s better not to flatter yourself. So remember, before you go on the road, clean the windshield of the car from dirt in advance if it is dirty.
Especially pay attention to the condition of the windshield if you are going to hit the road in dry weather. Even if the weather forecast does not promise rain this time, this does not mean that the windshield of the car does not need to be wiped clean of dirt. Please remember that during the trip you can accidentally touch the lever (handle) for turning on the wipers, which can damage the rubber bands of the brushes themselves. If you turn on the wipers in dry weather, you get the following, namely, if there is dirt on auto-windshield cars, soft rubber bands of wiper blades in a short time can simply lose their properties and be quickly damaged.
Therefore, dear motorists, we advise you to carefully monitor the condition of your wiper blades. If while driving the windshield has become quite dirty and with the wipers on it can no longer cope with cleaning it, then please do not be lazy and stop at the nearest gas station or near the store to clean the windshield of the car. For a thorough removal various pollution please use special automotive fluid for the cleaning automotive glass. With this universal cleaner, you can quickly and easily remove all dirt on the glass and without any streaks.
2) Thoroughly clean the glass from snow and ice.
In order to increase the service life of the wiper blades, it is necessary to monitor not only the cleanliness of the windshield itself. For example, many of us (you) in winter could often see on the road, in the same parking lot or in the yard, which seemed to have and, but they were all covered in snow and in an icy state. Often and mistakenly, many drivers turn on their windshield wipers in winter in an attempt to clear snow or ice from the windshield. At this moment, the soft rubber bands of the brushes are damaged. Remember friends, to seriously damage the wiper blades, you just need to turn them on once in winter. working condition if there is snow and ice on the windshield of the car!
Therefore, remember that before you set off on a journey always and in advance in the winter season In order not to clean the ice from the windshield in the morning in winter, it is necessary in the evening, after you have parked the car, thoroughly wipe the windshield (all windows) from moisture that has formed in as a result of snow melting or from a temperature difference between the street and the car interior.
By following this advice, friends, you will certainly be able to increase the life of the wipers several times.
3) Cleaning car wiper blades.
Many motorists still do not know that the wiper blades themselves also need periodic cleaning. During the operation of the wipers, over time, a certain coating appears on these brushes and as a result, the brushes no longer fit snugly and properly to the windshield, and the wiper rubbers themselves lose their former softness. Therefore, when using such dirty brushes, their coefficient of friction increases, which ultimately leads to premature wear of the surface of the wiper rubbers.
To clean the brushes from dirt, you will need a clean material, cloth or paper towel. Please wet the brushes with water or, then clean the brushes and the gums themselves from contamination. Be extremely careful, otherwise you can damage the rubber bands of the wipers. The process of cleaning the surface of the brushes should take place until a rag or paper towel slides easily over the surface of the brushes and rubber bands.
At this very moment, you yourself will see for yourself that your rag or paper towel has turned black. This will mean that you have actually cleaned the brushes of dirt.
True, friends, do not try hard and be zealous so that your fabric or paper towel becomes perfectly clean during cleaning. Remember that the brush itself, since it is rubber, can simply stain a rag or towel, they will never become perfectly clean after washing the brushes. If you start rubbing (rubbing) the brushes too long and thoroughly, you can damage the soft rubber bands on the brushes.
Here is a video, dear friends, from which you can learn how to properly clean the wiper blades that work on the windshield of a car:
A windshield wiper, aka a wiper, is an important element of driving safety in rain or snow. Faulty wipers make driving uncomfortable and extremely dangerous. How experienced car instructors determine that it is time to change the wipers, we will tell in today's article.
How long does it take to replace wipers?
At driving instruction experienced car instructors acquaint future drivers not only about the functioning of the car as a whole, but also about its operation constituent parts especially janitors. Their operation depends on the serviceability of the rubber lining (gum) and the frame.
If the wipers leave streaks on the glass, there is a play in the frame of the brush, or the surface is not completely cleaned, then it is recommended to replace the wiper. The above defects, perhaps, are considered the main signs that it is time to replace either the rubber bands or the entire brushes.
Windshield wiper replacement is also necessary if its rubber blades are damaged.
When the entire metal "hand" that holds the wiper is bent or broken, it is recommended to replace it entirely. By the way, this procedure does not present any particular difficulties, because here you just need to put your “hand” on the nut.
If it fits according to certain regulations, experts advise changing the wiper blades every six months, that is, before the start of the summer and winter seasons.
Additional wiper wear checks
You can find out if you need to change the windshield wipers using the following simple checks.
- Turn on the wipers, let them run and see if they leave marks on the glass. If they are not there, or they are, but only on the edge of the windshield, and there are no more than three lanes, then in soon substitution may not be made. But if in the central part you notice at least one stripe or more than six along the edges, then it's time to put new wipers.
- The most critical option, when the wipers should be changed as quickly as possible, is that the brushes leave large water stains, which, due to vibration, make the image fuzzy.
Extending the life of wipers
I think every driver wonders: how to make wipers last longer. There are several ways to help extend the life of your windshield wipers.
- Firstly, experts do not advise using wipers without a washer, because the dry operation of the brushes contributes to the intensive wear of its main element, made of rubber.
- Secondly, it is not necessary to dilute the “washer” with water too much in frost, since when sub-zero temperatures it can freeze on the brushes, causing them to rapid wear. If there is snow and ice on the glass in winter, do not turn on the wipers and do not try to scrape off the frost with a windshield wiper. In severe frosts, you can raise or even remove the brushes when leaving home so that they do not freeze to the glass.
- Thirdly, do not forget about prevention. Wipers should be washed periodically with plain water. This will remove large particles of dust and sand from the working element.
- Fourth, make it a habit to clean your windshield every time you fill up your car. In addition, regularly wipe the windshield wipers with a damp cloth and lubricate the swivel joints.
Today, classic and relatively inexpensive wipers are out of fashion. They were replaced by frameless devices that are tightly pressed against the glass and are distinguished by excellent aerodynamics - in the summer.
But in winter, wipers with a frame, but in a casing, work best. The frame plays the role of a stiffener and does not reduce the effect of adhering to the glass even in severe frosts.
Such wipers will serve you faithfully for a long time, and you will forget what dirty glass and stains on the surface are.
Video on how to change the wiper blades:
Good luck on the road and a happy journey!
The article used an image from the site directpress.ru
Wiper blades are humble laborers that allow the driver not to depend on the whims of nature, providing an excellent view of the road in any weather. "Wipers" - as the wiper blades are also called - are one of the nodes that ensure the comfort and safety of the car on the road. To extend the life of the wiper blades, you should follow the rules and recommendations for operation.
The main problem when using wiper blades in winter is that the blade body is very sensitive to snow and ice. This has a particularly strong effect on the operation of the frame "wipers", because. ice crust can quite easily form in the hinges, which prevents an even distribution of pressure from the driver to the rubber band. The tape itself is also exposed to precipitation and low temperatures. The rubber from which the tape is made changes its properties depending on the temperature. In the cold, it becomes more fragile and sensitive to deformation.
To prolong the life of the brushes, handle them in winter with particular care. Before turning on the wiper, it is necessary to remove snow and ice from the windshield, because. otherwise damage to the rubber band of the brush is inevitable. If you have frame brushes, before starting the cleaner, you also need to make sure that there is no ice or snow in the body hinges so that nothing interferes correct work wiper.
It is undesirable to leave snow on the surface of the wiper assemblies also for the reason that from the heat emanating from the windshield, the snow melts, but almost immediately turns into ice due to the fact that the ambient temperature is below zero. In addition, when the car is moving, it also occurs additional cooling all its external nodes.
To save yourself from the need for painstaking cleaning of all windshield wiper assemblies from accumulated snow, you can winter season put special winter options wiper blades. In case of frame brushes you can use them winter variety- with a protective cover that covers the body from precipitation. This greatly facilitates the operation of the windshield wiper in winter. However, using a brush with a protective cover does not mean that you no longer need to clean the windshield from snow and ice. The cover only prevents the accumulation of snow and ice in the body nodes. Another feature of this type of brush is the increased windage, which makes it difficult to operate the wiper when high speeds vehicle movement. For lovers fast driving in winter, this option is not suitable.
In winter, car owners prefer to use frameless or hybrid wipers. Such brushes have many advantages compared to frame brushes: streamlining is much better, snow and ice accumulate on the body less.
In winter, it is also worth remembering that the washer fluid should not be heavily diluted. It should be taken into account that when the car is moving, additional cooling of the liquid occurs, so its concentration can be left slightly higher than is usually customary at a given ambient temperature. Objections may arise to this that using a liquid of increased concentration will be much more expensive than a diluted one. But do not forget that in winter motorists use the washer much less frequently than in summer, and in extreme cold there is practically no precipitation and dirt, so that there is a need for frequent use of the washer.
Any driver will say that it is much easier to operate the wipers in summer than in winter. And this is not surprising, because. there is no need for an almost daily ritual of cleaning the windshield wiper from adhering snow and ice. In summer, you don’t have to worry that the body hinges ( frame brush) can be "bound" treacherous ice. And the surface of the windshield does not resemble sandpaper, which it sometimes looks like in the morning, when the heater has not warmed the glass yet.
But do not assume that in the warm season, wiper blades do not require personal care. They need to be kept clean at any time of the year. In winter - ice and snow, in summer - sand and pebbles can ruin the brushes. To avoid damage to the tape, care must be taken to ensure that there are no pebbles in the folds, which can deform the tape and lead to uneven pressure of the brush against the windshield.
It doesn't even need to be explained that you shouldn't force the wiper blades to work when the windshield is both dry and dirty. Brushes will still not be able to clean the dried dirt, but damage to the tape is quite real. You should first work with a washer to soften the dried dirt. And in general, even if there is no visible dirt on the glass, there are always particles of sand on the surface of a dry windshield, which is an excellent abrasive.
It is also worth regularly rinsing the brushes in warm water to wash off the sand and dirt adhering to the tape. This will help prevent uneven wiper pressure, damage to the brush band, and scratching of the windshield.
If oil stains appear, degrease the windshield and the rubber band of the brush, and then rinse with warm water. Do not forget that gasoline, various solvents and other chemicals have a destructive effect on rubber, so if such liquids get on the windshield, you need to clean it as soon as possible.
Possible Causes of Bad Wiper Blades
Leaves streaks when cleaning glass
This may be due to damage to the brush band caused by high or low temperatures. Another cause of damage to the rubber band can be pebbles and sand that are not removed from the brush in time.
To solve this problem, you can try rinsing the wiper blade in warm water. But although the chance that this will help restore the previous quality is extremely small. In this case, you need to buy new wiper blades.
Windshield remains cloudy even after wiper operation
Most likely, a film has formed on the surface of the glass due to some kind of oil. In this case, it is necessary to degrease both the glass and the wiper tape.
If this does not help, it may be damaged itself rubber band wiper blades. It happens that the tape gets a longitudinal rupture, which makes it impossible for the wiper to fit snugly against the windshield. The only solution is to buy a new brush.
The brush "jumps" on the glass
There can be many reasons for this, the most common of which are incorrect adjustment of the wiper mechanism, as well as the separation of the brush when the car is moving at high speed.
The best fit at high speeds is with frameless brushes. The use of spoilers also helps to reduce windage, which, when air is forced in, press the brush against the glass.
It is worth carefully adjusting the wiper mechanism so that the leash moves without jerking and is at the right angle. The brush should be perpendicular to the surface of the windshield.
Choosing and buying a wiper blade
To decide which “wiper” you need, you need to understand that there is no clear division “bad brush / good brush". It is widely believed that frameless brushes better than frame ones, but a lot depends on the quality of workmanship. Cheap frameless brushes are likely to be of lesser quality than expensive framed brushes.
The main thing in the brush is a snug fit to the windshield. Often this very glass in cars comes in a variety of profiles. And it is difficult to make a universal “wiper” that fits equally well to windshields. various models auto. In this regard, frame brushes win, because. the rocker system allows the brush to better bend around the contour of the glass.
When buying a brush, you should focus on the length of the tape recommended by the manufacturer. If a wiper blade is too long, it will be more difficult for the wiper motor to drive the entire system, and there is also a risk that the ends of the brush will not fit snugly against the glass, which will make the extra centimeters of tape completely useless.
Recently, the so-called hybrid brushes, combining the body from the frame brush and low profile from frameless.
For purchase quality brush glass cleaner should only be contacted by reliable stores to be sure of the quality and originality of the purchased product. For example, by contacting one of the retail stores of the group of companies "Auto-Alliance", You will not only find huge selection wiper blades, but you can also get competent advice from professional consultants.
Windshield wipers for a car are most often called "wipers" because of their main purpose - cleaning the windshield from dirt, snow, rain and other contaminants. All vehicles must necessarily be equipped with such cleaning devices, since otherwise the driver risks losing satisfactory visibility.
They usually consist of a lever at one end and a rubber brush at the other. It is the brush that, moving back and forth, cleans the glass from dirt.
Many drivers underestimate the importance of having quality windshield wipers, and this is important element ensuring safety on the road.
If due to heavy precipitation poor visibility is created, the wipers help to cope with the control and continue driving without risking getting into emergency. Good job The brushes directly depend on how accurately the main frame is adjusted and serviceable and how high-quality the rubber pad is, which, in fact, cleans the windshield and becomes unusable the fastest.
Most motorists are negligent about the timely replacement of windshield wipers, while greatly risking not only their safety, but also their passengers. Since in good weather brushes are not needed and no one cares about their condition.
And in bad weather, the driver turns on the brushes and discovers that they do not clean. Just for a moment, the driver can lose visibility, but this is sometimes enough to cause an accident. Insufficient attention to the problem, performance, as well as the desire to save money on timely replacement sometimes lead to disastrous consequences.
In order not to endanger yourself and your car, you should carefully take care of the brushes, use various means in order to extend the service life, or purchase new ones if even the slightest malfunction occurs in their operation.
It should also be understood that wiper blades are not an ordinary rubber strip, but the result of many years of work by experienced designers and engineers around the world, which fully satisfies all safety requirements. Naturally, all this applies only to high-quality brushes, created from specially selected materials using the most advanced technologies production.
But, unfortunately, these are less and less common in the assortment of shops and car centers. They are being replaced by cheap counterparts. The issue of choice should be approached with particular seriousness, because the main difference between a fake and an original is that they will not only do their job poorly, but can also cause damage to your car in the form of scratches on the glass. Agree, not very pleasant. To avoid this, do not try to save money. IN this case It is better to pay a little more than to regret later on the damaged appearance of the car.
If you care about your car, put convenience and safety above all, then the most effective option to extend the life of the wipers will be the use of winter and summer, depending on the time of year. After all, they have very significant differences, consisting in the fact that summer ones, unlike winter ones, do not have a soft cover that helps protect the frame from snow, ice and other influences. environment in cold weather. Due to the presence of such protection, the brushes are not covered with an ice crust, which means they retain their properties longer.
Also, to ensure maximum effective work"janitors", you should select them for each specific model cars. After all, even expensive and high-quality windshield wipers will not fully cope with their task on one car if they are created for a completely different one.
Many car owners do not take this fact into account, which then has a bad effect on the result. Each type of brushes is created based on a large number of machine parameters. This is the area of the windshield, its curvature, as well as the features of the fasteners. In many new car models, the windows are slightly curved, so not all brushes are suitable. Windshield wipers that are longer than necessary can interfere with the rubber band's snug fit on the glass.
But it also happens that even "native" windshield wipers do not cope with the task in view of the loss of their properties by the frame. A frame that has become unusable will not be able to ensure a snug fit of the rubber band to the glass, and it is no longer possible to fix this. The only way out of this situation is to buy a new set.
For the "wipers" to serve for a long time, one should first pay attention to such important qualities, like uniformity of texture, color and edge of the wiper gum. All this should be perfectly smooth, without any rounding and burrs.
It is also important to understand that cheap brushes will have to be changed much more often, because they will quickly become unusable and can ruin appearance glass. Separately, rubber bands for real "wipers" are not supplied to stores, if you do not take into account fakes.
This is because many manufacturers advise changing the entire structure, because this is the most best option. If due to lack of money it is not possible to buy a new set, then you can buy an elastic band domestic manufacturer. It is unlikely to clean as well as imported, but certainly better than the old one. Brushes made of high quality materials are resistant to external influences and perform their task regardless of weather conditions.
How to understand that the windshield wiper has become unusable and it's time to change it?
The very first signs will be the stains left by the brush on windshield, as well as gaps in cleaning even after thorough washing. In this case, you will need to replace the entire frame, or at least purchase a new gum.
When similar situations people are thinking about whether it is worth buying new “wipers” or whether there is still an opportunity to reanimate the old ones. Due to the low cost of the structure, it will be easiest to purchase a new one, while saving your precious time.
If you do not have enough experience and knowledge to repair the “janitor” on your own, then you will have to resort to replacement. Before visiting the store, read the instructions for the machine. It contains a list of those models that are suitable in all respects and will last as long as possible.
Another option would be to replace the pads, which will cost much less than the whole set. In specialized stores you can find Various types overlays: standard, available in black, and silicone, available in several colors. Brushes made of a rubber-graphite mixture and even coated with Teflon are also on sale.
In order to prolong the performance of brushes, it is important to follow the basic rules of use:
- It is undesirable to operate the wiper mechanism if the windshield is dry or icy. Therefore, you should not save on anti-freeze or water.
- Do not use brushes to remove snow. Initially, you need to shake it off with a special brush, and only then use the windshield wipers.
- In the cold season, make sure that the rubber band does not remain pressed against the glass for a long time. Remove it from the frame or simply lift the entire structure up. This will help to avoid freezing and deformation of the brush, because ice, sand, salt and other small particles play the role of a kind of abrasive, quickly making the gum unusable.
- Pay attention to the cleanliness of the entire mechanism. Timely clean the "wipers" from dirt.
- In summer, do not forget about ultraviolet radiation, which also has a bad effect on the condition of rubber. Because of high heat it may crack.
- To provide long work without breakage, it is necessary to lubricate the hinges
Gaining more and more popularity frameless wipers . Their advantage is that they are much cheaper than their classic counterparts, and at the same time they are pressed closer to the glass, thereby allowing you to achieve the best result.
The best manufacturers of brushes are such reputable companies as BOSCH, Champion and VALEO. The prices are high, but they are worth the money. Slightly cheaper option would be brushes domestic production. When choosing, focus on the company, cost and quality of brushes. Check them carefully before buying and then the windshield wipers will serve you for a long time and protect you from any bad weather.
