original and stylish car make tinted headlights. Today, this method is quite common due to its availability. Headlight tinting is not difficult and does not require a lot of time.
The cost of tinting depends on the chosen method. However, the headlights should be tinted very carefully, since if the established norms and rules are not followed, the corresponding consequences may arise.
It is possible to distinguish the headlights of a car among other cars of the same model range by replacing them with modern optics latest design, designed for specific model. However, it will cost much more than do-it-yourself headlight tinting. After carrying out this simple procedure, the car will look impressive and unforgettable.
The legitimacy of tinted headlights with varnish
Having decided to tint the headlights yourself, you should remember that the current law does not prescribe specific rules and regulations. Accurate information about allowable percentage there is no transparency. Stick to the 90% figure. This is the percentage of the required light transmission of the headlights after they have been finished with tinting agents.
Many car owners state the fact of the occurrence of problems during technical inspection motor vehicle after tinting.
Problems with law enforcement officers arise due to the increased risk of accidents associated with insufficient visibility during movement. Undoubtedly, it is not possible to tint headlights without sacrificing brightness, however, you should try to minimize the light-refracting effect.
Disadvantages of tinting
The disadvantages of tinting car headlights with varnish include:
- the need to dismantle the headlights for the duration of work or work to protect the body;
- a rather laborious process due to the impossibility of applying varnish evenly over the headlight area;
- varnish transmits less light than;
- return if necessary original view it will be quite difficult for a headlight to do this, especially since a poor-quality solvent can damage the optics (cloud it);
- under the influence of factors external environment the varnish is destroyed, which entails the need for more frequent correction of tinting, therefore, additional costs of money, time and effort.
Benefits of lacquer tinting
In contrast to the film method of tinting headlights, in this case only one advantage: it is absolutely affordable price due to the low cost of the materials used.
Preparing for headlight tinting
Before you tint the headlights with varnish, you need to decide on the manufacturer and its variety. A special tinting varnish is ideal, one bottle is enough for all the headlights. But spray paint for tinted headlights will take more light.
Lacquer tinting
Toning headlights with varnish begins with their dismantling. They must be placed on a flat surface. So, liquid tinting for headlights will lie more evenly, without forming smudges. The dismantling of the headlights must be carried out very carefully so as not to damage the optics and wiring. If the owner is not sure about own forces, you should contact the car service for help.
Next, the headlights must be thoroughly washed, degreased and dried. Degrease the surface of the headlight better special means or pure alcohol. After that, it is necessary to close with dense heavy material those places on the headlight where the varnish should not get.
Direct coating of headlights with varnish is recommended for safety reasons to be carried out in a ventilated area. You can also outdoors, the weather should be appropriate: dry, without strong gusts of wind. Humidity should be moderate (funny, like a weather forecast).
Shake the can before spraying so that the varnish in it becomes a homogeneous mass. It is applied at a distance of at least 25 cm from the surface of the headlight in a thin layer.
After applying the first coat of varnish, leave the headlight for a while so that it is completely dry. If during work specks or smudges appear on the surface, they must be immediately removed with a solvent, which must be kept at hand.
After the varnish is completely dry, it is necessary to apply a second layer, and a third. However, it is worth remembering the norms of light transmission.
A little secret: if you keep the can near a heat source while spraying paint, the paint will go softer and more evenly.
Install the headlights back on the car only if the car owner is completely sure that the paint is dry. If it lay unevenly in places, then the places with dry varnish will be damaged, and it will be necessary to re-work.
When tinting headlights with varnish for the first time, you should practice on ordinary glass and evaluate your capabilities. Also, it is possible to tint without removing the optics from the car, and you can watch how this happens in video format.
Video: how to paint the headlights with varnish with a gun (the materials used for this and the correct proportions of their divorce are shown).
Video: tinted turn signals varnish.
Recently, tinted headlights and taillights have become fashionable. This is one of the most simple ways make the car original appearance and emphasize his aggressiveness. Moreover, such a procedure is not at all difficult to carry out in your garage yourself.
As an alternative to do-it-yourself tinting, some go more simple way. market today automotive products offers ready-made tinted headlights for many models of foreign cars. However, their cost is not always affordable for motorists. And not every brand can find high-quality parts with this type of tuning. Therefore, most still do tinting on their own. Well, or, as a last resort, apply for such a service to a professional. Although the specialist will not care what model he is given, depending on the complexity of the headlights and lanterns, such work can cost a lot of money.
Tinting options for headlights and lanterns - pros and cons
From the options for tinting for headlights, you can choose between special varnishes and tint films. Fortunately, there are plenty of those on the market. Before deciding on the material, it is advisable to familiarize yourself with the advantages and disadvantages of each of them. This will help to avoid many problems in the future and save a lot of money.
Benefits of headlight lacquering:
- big choice colors and shades;
- ease and speed of application;
- the ability to tint the headlights without removing them from the car;
- fast drying varnish.
Disadvantages of tinting varnishes:
- bad throughput varnish;
- difficulties with removing varnish from the surface of the headlights if necessary.
In most cases, once varnished headlights remain so for the entire period of operation. This is especially true of light fixtures that are made of plastic. The varnish is almost impossible to completely remove without scratching the vulnerable plastic.
Advantages of tinting with special films:
- good film throughput;
- the ability to quickly remove the tint if necessary;
- headlight surface protection small scratches and scuffs;
- some types of films can be sanded quite easily, like ordinary glass;
Disadvantages of tint film for headlights:
- the complexity of applying the film to the headlights;
- for high-quality work, it is necessary to dismantle the headlights from the car;
- slight difficulties with tinting devices with complex geometry;
- a small selection of colors and shades of the film.
When choosing a material, you need to pay attention Special attention whether there will be any problems with traffic police officers. It may be better to tint the headlights with a material that is not too dark. Moreover, this factor will directly affect the safety of your movement. Too dimmed headlights will poorly illuminate the road, and dim rear lights will not be informative enough for vehicles driving behind.
We tint the headlights with varnish
Toning headlights with varnish is very simple and does not take long. To do this, you need to acquire the following tools and materials:
- special varnish for tinting headlights and lanterns;
- detergents;
- sharp knife;
- masking tape.
The tinting procedure is as follows. First you need to prepare the headlights and lanterns for work. To do this, using masking tape and plain paper, the surroundings of the body are pasted over so that varnish does not get on them. If the headlights and lights are removed from the car, then this step is not required, and the work will be much easier.
Next, the glass or plastic of optical instruments must be properly washed and degreased. Maximum attention should be paid to this stage, since the quality of adhesion of the varnish and the throughput of the devices depend on it. After cleaning, the surface is dried naturally.
Next, the surface is treated with varnish from a spray can in accordance with the manufacturer's recommendations. It should be remembered that the more layers applied, the darker the headlights will be, and the worse they will transmit light. After applying the varnish, the devices are left to dry again according to the manufacturer's recommendations.
At the end of the work, all protective materials are removed, and the devices are inspected for defects. If the headlights have been dismantled, then they are installed in place, after which they must be adjusted in accordance with the requirements of the car's operating manual.
Tinted headlights with film
There is nothing complicated in tinting the headlights with a film either. For work you will need the following materials and tools:
- building hair dryer with power adjustments;
- special tint film for headlights;
- detergents;
- simple sprayer with aqueous solution soaps;
- sharp knife and stationery scissors;
- rubber or silicone spatula.
The work process is approximately the following. First, the headlights need to be removed from the car. You can tint without removing, but it will be much more difficult to achieve good quality. Removed optical instruments are thoroughly cleaned and degreased. If there are corrugated badges from the manufacturer on the glass of the headlights, then it is advisable to first eliminate them by grinding.
At the next stage of work, you need to measure the right amount of tinting material. To do this, the headlight is wetted with water and a film is applied to it. The material is marked with a marker. When marking, a small margin should be left at the edges, which will later be either cut off or wrapped and glued to the back of the lantern.
Next, the marked piece of film is cut out. The headlight glass is wetted with soapy water, removed from the film protective layer and she falls into place. Then, with the help of a spatula, it is smoothed out and water and air are driven out from under it. This should be done from the center of the headlight to its edges. If the headlight has bends, then you can use a hair dryer for better styling. Moreover, if the headlight has too complex geometry, then the film is heated with a hair dryer even before application, in order to give it the desired shape in advance.
When all the bubbles are driven away and the film lies evenly and smoothly, you need to process the edges. To do this, they are either cut off along the contour of the headlight, or wrapped and glued with glue with reverse side. After that, the headlight is dried and installed in its place. After finishing work, it is advisable to avoid washes and high speeds. The final adhesive on the film will harden within a few days.
- Defence from mechanical damage. The film will prevent the formation of chips and scratches.
- Easy to take off. If you want to tint the headlights, then you can do it yourself without fear of damaging the optics.
- Unique appearance. Headlight tinting is the easiest and cheapest way to make your car stand out on the road.
- High light transmission. Tinting has almost no effect on the light from the headlights.
Material for tinting: film or varnish?
You can tint the headlights both with a film and with a special varnish. The technique for preparing the optics is the same for both materials (surface cleaning and degreasing). After the headlight, millet is varnished. At the same time, the cost of tinting with varnish is much lower than with a film.
However, this option has its drawbacks:
- The headlight needs to be removed for painting.
- It is quite difficult to achieve a uniform application of varnish on the headlight.
- Lacquer transmits less light than film.
- During operation, the varnish is destroyed by ultraviolet radiation.
- It is difficult, and sometimes impossible, to remove the tint without damaging the optics.
That is why we recommend giving preference to tinting with a film. Moreover, with the selected film, you can tint not only the headlights, but also the windows of your car. Our prices for car tinting in Moscow will pleasantly surprise you.
Choosing cooperation with our center, you guarantee yourself receiving high-quality services for affordable cost. If you have any questions, you can always ask them
Today, headlight tinting is a very popular phenomenon among Russian motorists. This is not surprising, because this is a great solution for those who seek to protect their " iron horse» from scratches and other damage. Also, tinted. But there is one thing - such tuning is quite expensive. But for those who know how to tint headlights with their own hands, it will be much cheaper.
If you decide to take this step, you must first understand for yourself that headlight tinting is a very responsible process. You need to be very careful in choosing the depth of the blackout. On a black or white car, completely black lights look luxurious and stylish, but such tuning is fraught with danger. Strong dimming of the headlights significantly reduces their brightness, so at night it is very. Besides, it's not very convenient. Well, the third argument is for heavily darkened headlights.
If you see a car with "black" headlights on the road, you should not imitate its owner. Usually made for cars that take part in exhibitions. Headlights, in which only a certain area is darkened, look more impressive. As a rule, only the top line, located along the cut of the hood, is tuned. Then the lanterns turn out to be a little narrowed and look very stylish. Light tinted headlights also look good, which slightly changes their light transmission ability.
Choosing a tint method
There are two main ways to tint headlights - using a special film and using an aerosol varnish. Both methods have their own advantages. For example, the use of film. In addition, it is easily removed from if necessary. Aerosol varnish, in turn, provides a reliable and durable tint, but it will not be easy to reduce if necessary. Therefore, this option should be chosen by those drivers who want to toned for a long time. Spray paint can last five to seven years on headlights if properly applied. First, consider the method using the film.
Film tinting
Before you tint the headlights with a film, you need to select the material and prepare necessary tools. Automotive film that is suitable for this type of tuning is sold in specialized stores and costs about $ 5-7 per piece. The tools that are required for work can be found in.
Required Tools
So, you will need:
- a knife with a sharp thin blade;
- a piece of soft cloth (2);
- cleaning agent;
- industrial dryer.
Film selection
The modern market offers us a huge number of different films that differ from each other in thickness and stretch percentage. These two indicators determine the quality of the material. The denser the film is, the more reliable it is from stones flying from under the wheels and other factors. Please note that multi-colored films are now on sale. They can be red, blue, yellow. But the most popular is still matte black. We do not recommend buying a red film, because the headlights turn red when using it. You can be fined by the traffic police for this.
The video shows how to tint the headlights with a film:
Toning procedure
Please leave your comment on the article! We are interested in your opinion.
Toning rear lights
But it often happens that if you want to buy new tuning headlights, many motorists are faced with a problem: new design headlights can not be found on every car model. There is another side to the issue: some of us are not satisfied with the price of tuning headlights. There is no need to worry about these things. If you have the desire, hands and the necessary knowledge, you can tint the headlights yourself. headlights will not require large material and time costs or special skills.
So, in this article we will look at:
- is it legal to tint headlights with your own hands;
- headlight tinting methods, advantages and disadvantages;
- how to tint headlights with your own hands.
Will I have problems with the traffic police?
You will definitely not have problems with the traffic police if you put factory-tinted headlights that have passed special certification. As for self-tinting, be prepared for the fact that there is no definite answer to the question of whether such headlight tinting is legal. The wording of the law is rather vague. Many car owners complain about passing inspection. Know that the attitude towards tinting with a film is more loyal, since, compared to paint, it transmits more light and covers the headlight uniformly.
Do not abuse tinting, as too dark headlights greatly increase. Therefore, the brightness should definitely be at the proper level. You won't be able to tint your headlights without any damage to brightness, but try to minimize the damage. And further. Don't experiment with exotic colors. Green, purple and other delights are still better to apply in other areas of life.
Ways to tint headlights. Advantages and disadvantages
The most common tinting methods: varnish (paint) or film. Consider their advantages and disadvantages.
Advantages and disadvantages of tinting headlights with varnish (paint):
- Cheap. But angry! Since the disadvantages are significant.
- when tinting with varnish, it is better to dismantle the headlights;
- paint (lacquer) is difficult to apply evenly;
- varnish transmits less light;
- if necessary, clean the headlight from paint, it will not work without damage. Any solvent can cloud the optics;
- paint is destroyed by ultraviolet radiation, temperature changes and precipitation.
Advantages and disadvantages of headlight tinting film.
- at any time you can restore the styling look;
- The film performs not only a decorative function. It protects the headlights from scratches and clouding;
- good light transmission (due to uniform light transmission);
- perfectly flat surface;
- high-quality film can be polished if necessary.
- expensive.
Do-it-yourself headlight tinting. Where to begin?
First, decide on the method of tinting. We have already considered the advantages and disadvantages of each of them. Determine what your priorities are and make your choice. If you decide to tint with a film, study the reviews of manufacturers and the characteristics of the films.
Choose a color that goes well with the body. Today there is a large selection of colors different quality from different manufacturers. Main performance characteristics: stretch percentage, thickness, light transmission.
Decide what design you want. On the headlights, for example, you can make not a solid tint, but only the “cilia” toned. You can combine a couple of colors.
Video about car headlight tinting:
Toning with paint (lacquer)
What paint is right for you? Aerosol will steal a lot of light. Therefore, choose a special tinting varnish. The price of a can of high-quality varnish is high, but one piece will be enough for you.
Before tinting the headlights with varnish, it is better to dismantle them. On a horizontally lying headlight, the varnish will lie neater, without streaks. Carry out dismantling carefully so as not to damage the wiring and optics of the headlight. Think in advance if you can install the headlight back?
Close all areas where the varnish should not get. Before varnishing, the surface of the headlight must be degreased and cleaned. This is done with a special tool or alcohol. Let her dry.
It is desirable to carry out staining on outdoors, but the humidity should not be increased. A damp cloudy day is better to wait out.
Shake the can well before spraying. Apply paint in a thin, even layer. Hold the can at a distance of 30 cm from the glass surface. If you hold the can close to a heat source (such as near a radiator), the toner will spray better.
Apply the first layer and let it dry well. Make sure that there are no specks and no smudges appear on the headlight. Keep solvent nearby just in case.
After the first layer dries, apply a second or several alternately to obtain the desired effect. Each layer must be dried. Remember the norms of light transmission and do not overdo it.
Do not rush to put the headlights in place, otherwise the paint may dry unevenly. After drying, the paint may become matte. It needs to be polished to a shine, leveling the surface.
If you do not have such skills, practice on plain glass first.
Film tinting
On a flat surface, everything is simple. In places where the surface has a bend, warm up the film a little with a hair dryer, for elasticity, stretch it a little and roll the film with a squeegee. Glue the edges well and cut off excess pieces of film.
Beautiful and stylish car to you!
- News
- Workshop
Billions of rubles were allocated to the Russian auto industry again
Russian Prime Minister Dmitry Medvedev signed a resolution that provides for the allocation of 3.3 billion rubles of budget funds for Russian manufacturers cars. The relevant document is posted on the government website. It is noted that the budget appropriations were originally provided for by the federal budget for 2016. In turn, the decree signed by the prime minister approves the rules for granting...
Roads in Russia: even the children could not stand it. Photo of the day
The last time this site, located in a small town in the Irkutsk region, was repaired 8 years ago. Children, whose names are not called, decided to fix this problem independently, so that you can ride bicycles, the UK24 portal reports. The reaction of the local administration to the photo, which has already become a real hit on the network, is not reported. ...
New flatbed KAMAZ: with automatic and lifting axle (photo)
New onboard trunk truck- from the flagship 6520 series. Noinka is equipped with a cab from the first generation Mercedes-Benz Axor, Daimler engine, automatic transmission ZF gears, and a Daimler drive axle. At the same time, the last axle is lifting (the so-called "sloth"), which allows "significantly reducing energy costs and ultimately ...
Prices announced for sports version sedan Volkswagen Polo
A car equipped with a 1.4-liter 125-horsepower engine will be offered at a price of 819,900 rubles for a version with a 6-speed manual transmission. In addition to the 6-speed manual, buyers will also have access to a version equipped with a 7-speed DSG “robot”. For such a Volkswagen Polo GT, they will ask from 889,900 rubles. As Auto Mail.Ru already said, from an ordinary sedan ...
Demand for Maybachs has risen sharply in Russia
Sales of new luxury cars continue to grow in Russia. According to the results of a study conducted by the AUTOSTAT agency, following the results of seven months of 2016, the market for such cars amounted to 787 units, which is immediately 22.6% more than in the same period last year (642 units). The leader of this market is the Mercedes-Maybach S-Class: this...
Run Magadan-Lisbon: there is a world record
They traveled across Eurasia from Magadan to Lisbon in 6 days 9 hours 38 minutes and 12 seconds. This race was organized not only for the sake of minutes and seconds. He carried a cultural, charitable and even, one might say, scientific mission. Firstly, 10 eurocents from each kilometer traveled was transferred to the benefit of the organization...
Announced Russian prices for Infiniti Q30
car in basic configuration City Black, equipped with a 1.6-liter 149-horsepower engine (250 Nm) and a system front wheel drive, will cost 2,299,000 rubles. For this money, the buyer will receive seats upholstered in Nappa leather, panels and armrests trimmed with Alcantara material, as well as LED adaptive headlights, ABS + EBD systems, a dynamic ...
Lotus will release a crossoverLotus will release a crossover
In fact, the first Lotus crossover was supposed to appear a few years ago. In 2006 on Geneva Motor Show concept crossover Lotus APX was presented (pictured), which in a couple of years was supposed to be reincarnated as serial model. A year later, its electrified version was presented, but the Malaysian company has financial problems ...
Mercedes will release a mini-Gelendevagen: new details
New model, designed to become an alternative to elegant Mercedes-Benz GLA, will get a brutal appearance in the style of "Gelendevagen" - Mercedes-Benz G-class. The German edition of Auto Bild managed to find out new details about this model. So, according to insider information, the Mercedes-Benz GLB will have an angular design. On the other hand, complete...
New measure: drivers allowed to chip in for road repairs
The corresponding bill was approved by the deputies of the regional legislature, RBC reports. Both individuals and legal entities. Citizens and companies will be able to make "voluntary donations" that will be directed to " financial security road activities". "After...
HOW to choose and buy a car, Buying and selling.
How to choose and buy a car The choice of cars, both new and used, on the market is huge. And not to get lost in this abundance will help common sense and a practical approach to choosing a car. Do not give in to the first desire to buy the car you like, carefully study everything ...
HOW to choose a used car, which used car to choose.
How to choose a used car There are quite a lot of people who want to buy a car, but not everyone has the opportunity to buy a brand new car in the showroom, which is why you should pay attention to used cars. Their choice is not an easy task, and sometimes, in order to...
