Now tinting the rear headlights with a film is very popular not only among fans car tuning. Of course, many people try to tint the optics in the first place so that the car looks stylish, stands out in the traffic, and attracts the attention of others. But tinting headlights with a special polymer film is of great utilitarian importance: the coating protects the glass of lighting devices from scratches and mechanical damage.
How to tint the front and rear lights with a film?
Tinting headlights with a film is a relatively simple process, although it requires certain skills and great care.
- It begins with the fact that according to such criteria as color and thickness, the material itself is selected.
- After that prepare the headlights. They are thoroughly cleaned of dirt, washed and degreased.
- Next, using sharp scissors or a regular clerical knife, a piece of film larger than the headlight is cut off (that is, with a margin).
- It is applied to the surface of the glass, firmly fixed on it, and then carefully, to avoid the formation of air bubbles, smoothed out from the center to the edges.
- In rounded areas, the film is slightly stretched so that it fits better. To soften it, you can use a building hair dryer.
- After the headlight is completely covered, the excess film that is present at the edges is carefully cut off.
Toning rear lights produced using exactly the same technology.
Benefits of tinted headlights
- Protecting the surface of the headlight from damage and chips
- High level of light transmission
- Film can be removed at any time.
- Individual appearance your car
Which is better: tinted headlights with film or varnish?
For tinting headlights, not only a film is used, but also a special varnish. Optics are prepared in the same way (cleaning, rinsing, degreasing) and then simply stained. The cost of such tinting is significantly lower than film tinting, but this method has significant drawbacks:
- To carry out work, the headlights must be dismantled;
- Coating glass with varnish evenly is very difficult;
- The varnish transmits less light than the film;
- The varnish under the influence of ultraviolet radiation is gradually, but steadily, destroyed.
In addition, if it becomes necessary to “tint” the headlights, then the film is quickly and easily removed, but it is almost impossible to remove the varnish without damaging the optics. Of course, a VAZ headlight can be simply replaced with a new one without any special financial losses, but the price of a similar device for a foreign car is still quite high.
Examples of our work
Scheme of work
1
Recording you
at a convenient time.
2
We carry out
work with you.
3
you pick up
updated car!
Although the toning procedure car headlights film is quite simple, it is better to entrust this work to professionals. Our specialists have extensive experience in this matter, all procedures for tinting with a film are carried out quickly and with a guarantee. In order to find out how much this service costs, just look at our price list or call us - we will write you down for any convenient time, because some of our centers work 24 hours a day!
In this article we will analyze the question: How to tint yourself rear lights car! Why do it at all? Here are some reasons why motorists tinted rear lights. 1. Tuning. Everyone wants to highlight their car from the gray stream, and tinted lights help to give the car an exclusive look. 2. Headlight repair. There are situations when, for example, a stone flies off into the rear light or a crack, chip, or the like forms. mechanical damage. There are only two solutions in this case: replace the lamp or tint it in order to hide the defect, or, in the end, you can do nothing at all and continue to drive with cracks and chips. Although if you are reading this article, then this option (leave everything as it is) is not suitable for you. So let's take a look options for tinting the taillights of the car.
The taillights of the car can be tinted with a film, or with a translucent tint varnish, which comes in black or red. By the way, you have probably seen cars with rear lights are tinted body color? Looks very cute too. But how to do that? I will answer this question a little further!
Here is an example of taillights in body color.
I can’t say unequivocally that the film is better than varnish or vice versa, since the relief of the headlights is different, and this is the convenience of applying one or another coating. Therefore, choose the method of tinting the headlights at your discretion, based on the shape, the desired color and the material with which you will tint the headlights.
1. Tinted headlights translucent varnish.
With the help of varnish, you can easily tint any headlights, turn signals, reflectors and other details. To do this, we need a bottle of Motip varnish. It comes in two colors, black and red. I do not recommend using other varnishes, because they are not convenient to use.
Even for tinting the headlights with varnish, we need gray Scotch Bright, if anyone does not know, this is such a matting fleecy matter. With its help, it is necessary to wipe the glass of the headlight, in those places where the varnish will be applied. This is necessary for better adhesion of materials. In addition to these two materials, to tint the headlights you will need masking tape, covering material, newspaper, napkins, and a degreaser.
step by step algorithm.
* Remove the headlights from the car. If you do not want to do this because of laziness or difficulties in disassembling, then you need to cover the body parts with the help of covering material or newspapers in order to avoid getting the varnish where it should not.
* Preparing the surface. This is where we need Scotch Bright. You need to work with him "wet", i.e. matting the surface of the headlight, it must be moistened with water. If you ignore this point, then you can make scratches that will later be difficult to hide with varnish. Then it is necessary to dry the headlight and remove all residual water, Special attention give to hidden cavities, from which a drop may fall on the surface of the varnish at the wrong moment, and water in the painting is the strongest enemy. Be careful! Only after that, take a clean cloth and degrease the surface.
* Application of varnish. It is advisable to perform this procedure in a dry, warm and well-ventilated area. Before using the bottle, shake it well so that the components are thoroughly mixed. You need to spray the varnish at a distance of 30-40 cm from the part, if you bring the bottle too close, you can make a bunch of smudges. The transparency of the headlight depends on the number of applied layers. I would not advise making the headlights too dark for road safety reasons, especially on bright, sunny days. Ideally, apply 2-3 even coats, while the headlights will be slightly dark and everything is in order with safety.
This varnish dries very quickly, at a temperature of 25-30 degrees, the drying time is approximately 40-60 minutes.
* Installation of optics on the car. Everything is clear here :) We install optics in reverse order, unless of course you filmed it at all.
And here is the result of our work! The headlights turned out dark because about 5 layers were applied to them (the desire of the client).
In the same way, the headlights are tinted in red.
So, how do you tint your headlights to match your body color?
You can do this with a film, or with paint. Consider the second option, since it is the most optimal, provided that there are no body-color films in your city.
The preparation process is exactly the same as before painting from a balloon. Only instead of a can of varnish, you will need more professional equipment, compressor and airbrush.
Also, from materials, you will need paint in body color. It can be selected by the code that is on the plate, most often located under the hood of the car. It looks like this:
If there is no such plate, then you can remove any element from the car, for example, the gas tank hatch and take it to the selection of car enamels. Paints You need no more than 50 grams + it will require clear nail polish, it needs about 100 grams.
ATTENTION!!!
The method of tinting headlights in body color, only suitable for cars with two component paints, i.e. those on which it is necessary to apply also a varnish. Alkyd and acrylic paints are not suitable for this type of work !!!
Step-by-step algorithm for tinting the taillights in body color:
1. We remove headlights or cover car parts.
2. Degrease the surface.
3. In a measuring cup, dilute the clear varnish. You must have it 2K, i.e. the varnish itself and a bottle of hardener. Then, in this varnish, you need to add a few grams of paint. Just do not overdo it, less is better than more. The varnish should acquire color. I recommend using a solvent to a minimum, since with a large amount of it, it will not have time to evaporate, and will eat into the plastic of the headlight, which will lead to very bad and irreversible consequences.
4. Pour all this varnish mass into the spray gun tank and apply it to the headlights. It is better to do this in two layers, the first one will be drier in order to better adhere to the surface, and the second layer can be applied already in spill, trying to put it in gloss. But if suddenly the gloss does not work out, this problem can be solved
5. We are waiting for the part to dry. Typically, such a varnish dries from 8 to 24 hours, depending on the manufacturer and the drying temperature of the product.
Another tip, after you have tinted the headlights, after about 7 days I recommend polishing them with a polishing paste. So they will be even brighter and more beautiful.
For visuals, I have prepared a video from which you can clearly understand car taillight tinting process.
2. Tinted headlights film.
To do this, you will need a translucent tint film. If you want to tint the headlights black, then the film used for tinting will be enough for you. automotive glass. But if you have special color preferences, then you are welcome to the store :)
With the help of these films, you can tint both the rear and front headlights of the car, and doing this without damaging the optics. In this regard, the film has an incomparable plus in relation to varnishes. But of course, there are also disadvantages, which I mentioned earlier.
Apply film to headlights In principle, it is not difficult, it is only a matter of experience. Therefore, before using a color film, buy the cheapest Chinese tinting roll and practice on it so as not to translate high-quality expensive material in vain.
It is not easy enough to describe the process of applying a film to headlights, so I suggest watching a video on this topic.
After reading this article, you should not have any questions about how to tint your taillights. Of the proposed options, you will definitely choose the one that you like :) Well, detailed instructions will help you get things right.
Good luck in your endeavors!
So many conversations, judgments, and disputes, as there were and are about tinting, did not arise, perhaps, in any other issue. Today we will develop this topic in a slightly different direction, touching on the issue of tinting the rear lights of cars.
We will talk about the most common methods for implementing this event, the pros and cons of each of them, as well as the process of performing the necessary work.
Why tint the rear lights of a car?
The main purpose of tinted headlights- giving the car a special, slightly daring look. We won’t argue whether this is good or bad, just say that any car whose taillights are tinted in body color looks really very bright.
Some car enthusiasts motivate their decision with a desire to protect, thereby strengthening the strength of the glasses of their lighting fixtures, but craftiness is visible in this. If the “booking” of the headlights of the car can still be justified by this motive, then the likelihood of stones getting into the taillights looks like something truly fantastic.
There is another reason for the use of special films. It concerns cars imported from overseas, which, by coincidence, turned out to have orange turn signals. Recall that normally american cars are equipped with red direction indicators, and traffic police inspectors and technical inspection officers can equate their orange color to a change design features car, with a corresponding fine and an order to eliminate the allegedly made changes. This kind of problem is easily solved by sticking a red film. This will completely eliminate any color mismatch issues. In fairness, we say that such difficulties arise extremely rarely, and only exceptionally meticulous police officers can provoke them.
What are the ways to tint optics?
In total, there are 2 ways to tint the rear optical devices:
- the use of special tint films,
- darkening varnish.
Film tinting
This method can be called the simplest. It can be performed by absolutely any motorist, even in ordinary garage conditions. The advantage of using a film is that the applied coating can be removed at any time. Well, the price of such a solution is the least high.
Unfortunately, a very blackout film is able to attract the attention of traffic police officers who may present violations to you. point of traffic rules 3.3" Do not work in the set mode or the external lighting fixtures and retroreflectors". Also, a police officer may require you to eliminate the cause of the malfunction on the spot, i.e., peel off the film from the lights yourself (if the headlights are tinted with varnish, then you will not be able to fix it just like with the film). As practice shows, talk about high degree light transmission does not bring the desired effect.
From the point of view of workmanship, the film is good only when applied to a flat surface that does not have chips or deep scratches. If they are present, the film will further emphasize their presence.
Advantages:
- Beautiful view;
- Low cost;
- High light transmission;
- Booking effect, protection of optics from scratches and clouding;
- Can be removed at any time.
Flaws:
- Over time, the film will scratch.
Optics lacquer tinting
Let's just say, forget about all the cheap varnishes, which are sold in a wide range in our car dealerships. When dried, they will give an effect that is exactly the opposite of what you want. Instead of a shiny gloss, the lanterns will be dirty matte, which, you know, will nullify all talk about aesthetics. For a given goal, you need to choose expensive professional materials, slightly darkening them with a special varnish. This gives the gloss the necessary depth, emphasizing its saturation. The final result is excellent. Over time, the varnish can be polished and small scratches that have arisen during operation can be removed. Separately, we make a reservation that tinting with varnish at home is extremely difficult to perform. For these purposes, it is better to resort to the services of professionals who will conduct necessary work in a special paint booth.
Advantages:
- Low cost.
Flaws:
- It is better to remove the optics before tinting;
- Less light transmission;
- Uneven application, varnish is difficult to cover evenly;
- It is impossible to remove varnish from optics without consequences.
Do-it-yourself film tinting. What is needed for this?
To perform the work, 3 basic conditions must be met:
- The lights must be removed from the car (with some experience, you can work without removing the optics from the car).
- The surface of lighting fixtures must be thoroughly cleaned of dust and dirt, and this must be done without the use of aggressive chemical compounds.
- Work must be carried out in a heated room at room temperature.
For self-pasting optics with a film, we need:
- tint film,
- sharp knife,
- sprinkler (you can use garden),
- degreasing liquid,
- shampoo or liquid soap
- some rags,
- squeegee (with which it will smooth the film, you can also use a simple card wrapped in a soft cloth),
- hair dryer (it is better to use an industrial one, but an ordinary home one is also suitable).
What film is better to use for tinting optics?
We would recommend choosing a film Oracal 8300. This film is ideal for tinting automotive lighting fixtures. You can also buy ordinary Chinese film, but it is better to use good quality film.
What shade of film to choose?
Dark film (used mainly for tinting rear lights):
- Oracal 8300 074 - light gray (the lightest shade, slightly darkens)
- Oracal 8300 073 - dark gray
Red film (used for tinting rear lights):
- Oracal 8300 033 - red-orange
- Oracal 8300 032 - light red
- Oracal 8300 031 - red
Yellow film (used for front optics, including for fog lights to give JDM style):
- Oracal 8300 025 - sulfur yellow
- Oracal 8300 021 - yellow
- Oracal 8300 020 - light yellow
Step-by-step guide to self-tinting optics
The film can be glued in 2 ways, dry and wet. In this article, we will consider the second method, because. he is easier. Work is best done together.
Tinted headlights and lanterns with film prices in Moscow
Headlight tinting considered to be common external tuning car. Car lovers who care about
Their cars, they want to distinguish their car from the main driving mass. This transformation gives the headlights style and charm. Of course, you can buy tuning headlights, but there are not always appropriate models or the price is not satisfied. The most optimal and correct solution is headlight tinting film.
By itself, tinting headlights is a pasting of glass or plastic headlights with a special film. Its purpose is not only aesthetic, it increases the safety of headlights and foglights.
Today, car owners tint headlights using varnishes or films. The best option is the second.
| Rear lights (2 pieces) | from 2100 rub. |
| Rear lights (4 pieces) | from 2500 rub. |
| Turn signals, fog lights | from 400 rubles |
| Headlights (pair) | from 2100 rub. |
Film advantages
- Easy to apply and peel off if necessary.
- Protects glass or plastic from cloudiness and scratches.
- The light from the headlights practically does not change, does not darken them.
- Tinted headlights with a film creates fewer problems with the traffic police.
On the market car parts big choice films, a wide range of colors and qualities. In addition to color, these products differ in density and stretch percentage. There are glossy and matte films. Thicker options for high level protect your headlights from stones and objects flying from under the wheels of passing cars, and from scratches during operation. Tinting of car lights in SVAO SAO SZAO VAO provided by manufacturers with a wide range of color choices and good quality in terms of light transmission. With the choice of color, the consumer is determined independently, to his taste.
Before starting work, you need to prepare the headlight for this. It can be removed or cleaned on the vehicle. The headlight is washed to a shine and degreased. Then take the dimensions
We make a pattern of the form and cut out the film according to this pattern with an allowance at the edges. Then do as you please. You can remove the sticker from the backing and, after
After wetting the headlight, glue everything on it at once. This way tinted lights choose a car if you are confident in your abilities and you are not doing it for the first time.
If this is your first experience, then stick it, gradually tearing it off the substrate. You need to start the process from a flat surface, moving gradually to the corners. In order to
It was more convenient to expel water from under the film, use a squeegee. Experts advise using a hair dryer to fit the curved parts. Using a squeegee, lay the material behind the end of the headlight and cut off the excess edges.
Fast and high-quality inexpensive in Moscow.
Hello, Dear friends! Today we will talk about such a topic as tinted taillights. To be more precise, I will tell you by what methods you can perform such a procedure, how legal it is and whether you should be afraid of fines.
In fact, such a procedure became popular far from 2017 and certainly not in 2018. But now more and more often I hear questions about whether it is legal to do it yourself.
Some argue that tinting is completely prohibited. And those who try to tint the optics with a red film will immediately receive a huge fine or even lose their rights for a whole year.
It is necessary to dispel some common myths and tell everything as it is. Let's talk both about the potential fine, and about the ways that allow you to toned without any problems with your own hands rear optics own car.
Let's turn to GOST
You probably know that there are rules and laws regarding car window tinting. Just recently I talked about and also we discussed the issue . I advise you to refresh your memory and read the materials again.
For them, I would suggest that you familiarize yourself with removable tinted on a rigid basis, the link to which will be , and removable silicone tinted with link .
Now let's talk specifically about the taillights. In relation to their tinting, no requirements are prescribed. There is only a regulation on the operation of automotive lighting equipment. Regarding the rear optics, it is written there that only yellow, red and orange color. All others are prohibited.
There is one amendment here. To illuminate a lantern reversing in Russia only light is used white color, as well as for license plate illumination.
These are the only official rules regarding such an issue. Therefore, it is on them that you need to rely when you decide to do tinted rear optics. If any other color is used, in addition to those listed, when fixing this fact, law enforcement officers qualify this as an offense. Therefore, you will be fined.
Potential penalties
If there is a tint on the rear optics that does not correspond to the characteristics prescribed in the Code of Administrative Offenses, then the driver vehicle will impose a fine.
Only here is important nuances. The thing is that in the current legislation there are no specific clauses that relate specifically to rear optics. Just don't think that it's now legal to tint your headlights any color you like.
Here the traffic police officers will start from Article 12.5 Part 1 of the Code of Administrative Offenses. That is, they will present you with the fact of an offense due to vehicle malfunctions in accordance with the requirements for the admission of the vehicle to operation. If your taillights are found to be inappropriate, get ready to receive a fine of 500 rubles.
Drivers note that traffic police officers rarely fine for such a violation. And if you tint the optics without changing the color of the glow of the devices, then there will be no problems at all.
Although there is practically no threat of a fine in this situation, it is still necessary to remind about the methods of paying fines. Link to interesting useful material about it will .
Tinting methods
I quite often see how the rear optics are tinted on domestic cars like Lada Priora, Grant, Vesta, Kalina, more classic VAZ 2114, 2110 etc.
But tinting also looks good on foreign cars like Mazda 3, Hyundai Solaris, Ford Focus. Here the question is rather what material to use and how well the work itself was done.
Since we have already decided whether such tinting is allowed, we can move on to the topic of creating such a tuning element. It is definitely not prohibited, although it is carried out within certain restrictions. Peter, Moscow and many other cities offer a wide range of tuning studios where you are ready to tint your optics.
Before making a decision, think about how you will do it. Be sure to see the photo ready-made options and evaluate the suggested methods. There are three methods in total.
- Varnish. The option of using varnish is quite common, although it is not considered ideal. It has its own nuances and shortcomings;
- Liquid rubber. Relatively new method, characterized by exquisite visual effect after application. In my personal ranking, liquid rubber takes second place;
- Special films. Everyone admits that film tinting is the most profitable, spectacular and effective. Let the price in comparison with the varnish is slightly higher.
Now we will consider each method separately to bring some clarity.
varnish
Until the films became widespread, everyone used varnish without exception. But even in our time there are motorists who prefer this option.
To tint the taillights, you need to buy a can of special varnish. It is applied in several layers after the previous one has dried. The number of layers determines how dark the headlights are.
If you want to do it yourself with a spray can, you need:
- thoroughly clean the surface to be treated;
- close the car paintwork around the lights with paper or polyethylene;
- or dismantle the optics completely so that the paint does not get on other parts of the body;
- apply the first layer and wait for complete drying;
- apply a second coat and also wait until the paint dries;
- do the same procedure on both sides of the car until the desired darkening is achieved.
Remember that it will be impossible to restore the lanterns after applying the varnish. I'll have to buy a new optic.
Liquid rubber
A relatively new method based on the use of liquid rubber. Moreover, PlastiDip products are the most popular in Russia.
Liquid rubber is sold in the form of spray cans or in cans, the contents of which are poured into the spray gun. To tint the headlights, a special transparent rubber is used.
When a layer of material is applied, the optics acquire a matte and slightly darkened structure. With the help of rubber, you can quickly and easily improve the appearance of the lanterns. The material dries quickly and is removed from the surface.
If you need to remove this layer, the procedure will only take a few minutes. themselves lighting will not be affected, which gives liquid rubber another important advantage.
The composition is applied by analogy with varnish. Therefore, I will not go into details.
Film
Objectively best material for tuning taillights are special high-quality films. They are made specifically for taillights. Additionally, they have the function of protection against damage.
Its benefits include:
- adequate price;
- high quality;
- long service life;
- ease of application;
- protection of the headlight housing from damage;
- the possibility of dismantling;
- good light transmission ability;
- minimum claims from traffic police officers;
- wide choose.
But still, it is important to understand that tinting in the case of rear optics is used purely as an element of tuning. It has no significant practical side.
Now briefly about the application procedure itself.
If you decide to tint the taillights with a film with your own hands, this is done like this:
- headlights are washed thoroughly;
- a film is applied and the desired piece is cut out with a small margin;
- the headlight is sprayed with soapy water from a spray bottle;
- removed from the film protective layer and fits on the surface of the optics, avoiding wrinkles;
- using a squeegee and heating the film with an ordinary household hair dryer, it spreads over the surface;
- at the end, the excess is cut off.
