One of the many ways to make your "iron horse" exclusive is camouflage on a car. This type of tuning can be done with your own hands by choosing any of the following technologies: paint the car in one of the camouflage color options or paste over with a vinyl film with the appropriate pattern. These methods can also be combined.
Preparation of tools and materials for painting a car in camouflage
If you decide to paint a car in camouflage with your own hands, then the first step is to prepare the necessary tools, materials, improvised means for this. You will need:
- paint in special aerosol cans;
- polish;
- sharp knife;
- vinyl film;
- varnish to create a matte finish;
- solvent;
- petrol;
- putty knife;
- sponge, fleece or flannel napkins;
- several old newspapers;
- narrow masking tape.
Painting a car in camouflage differs from uniform painting in one color by applying multi-colored spots.
As for the requirements for the room, lighting and air temperature, they are no different from those that are presented during the usual do-it-yourself painting of a car. The working room should be clean, well-lit, the optimum air temperature is +5-+20 °C. Preparation for camouflage painting of a vehicle consists of the following steps:
- The car body must be washed clean with a sponge using detergents, dried and degreased using gasoline for this.
- Cover windows, door frames, optics and other non-paintable elements of the car with old newspapers using masking tape.
Now the vehicle is ready for applying camouflage painting and you can proceed to the main process.
Technology of painting a car in camouflage
Applying camouflage to the car can be done manually or using a stencil. Most best result it will turn out with the first option, the picture will look more natural. The use of a stencil will significantly save the time of painting the car body. Let's consider both of these options.
- In the first case, you will need a narrow masking tape: to create stains on the surface. It is easy to use, as it holds well and can be easily removed without damaging the paintwork of the vehicle body. With this material, smooth lines are easily created. When working with masking tape, it is important to prevent air pockets and folds that can penetrate under paint material, forming smudges. Form a screen around the stains with old newspapers to protect the coating.
- To make a car camouflage with your own hands using a stencil, you will need a vinyl film. Cut it into large fragments, make holes in the form of camouflage spots. Attach the resulting stencil to the car body and start painting with spray paint
And in the first and second cases, painting camouflage begins with the application of black. The next color is brown, it should be applied after the black has completely dried, not earlier than after 2-3 hours. And finally, we draw green spots.
When positioning the tape or stencil, it is important that subsequent stains overlap. This is the only way to achieve complete camouflage coloring. The best option that will look original is large spots located on different elements of the car body.
If you want to make a drawing with a blurry outline with your own hands, then use an airbrush for this. For a white or light body, camouflage will look great in winter version. To do this, it is enough to apply large black and brown spots with a sharper outline on a light surface, emphasizing the curves of the body.
After painting is completed and the surface is completely dry, the machine should be varnished. For this, a varnish with a matte effect is best suited, creating a velvety surface that does not shine in the sun, does not reflect light. The matte finish better emphasizes the silhouette of the car, highlighting the contours of the body.
The lacquer layer will serve as a protection for the camouflage painted surface. The application technology is no different from conventional car varnishing.
Varieties of camouflage film for cars
In order not to paint the car, you can use a special camouflage vinyl film, pasting it over the body. Today, for car owners who want to highlight their car among the gray mass of similar Vehicle, there are a huge number of varieties of camouflage films. Among which everyone can choose the color to your taste. The film material may have:
- different texture and thickness;
- glossy or matte surface;
- different width;
- large selection of patterns and colors.
Drawings come in different shapes, scales, intensity, colors. They are divided into such varieties.
| Drawing | What does it look like |
| Forest (military) camouflage | The combination of black, dark and light green, brown, white colors in the form of irregularly shaped spots, as if passing into each other |
| hunting option | With the texture of green trees, oak leaves, reeds, branches, grass. Primary colors: various shades of green, black, brown, yellow |
| Winter camouflage | Large black, gray, brown spots of a pointed, elongated shape are located on a white background. |
| Deserted | The combination of small spots of yellow-brown colors |
| digital camouflage | Such camouflage for a car is similar to enlarged pixels. Available in desert, winter and other colors. Matches perfectly with the decals on the car body |
| Animal skin | Most original version colors - a film dyed under the skins of animals - zebra, tiger, leopard |
The main advantages in using the film are the ease of pasting the car with your own hands, saving time. In addition, the film can be removed fairly quickly without damaging the old coating.
Many car owners have a desire to stand out among the entire flow of cars. The main way to prove yourself is tuning the exterior of the car. Today, an interesting and unusual direction is camouflage on cars, such colors are actively used not only on vehicles participating in hostilities, but also in the field of fishing, hunting and some other areas of use. You can simply order such a service at a service station, but there is another way - to apply a camouflage pattern yourself.
Types of camouflage and how to apply it to a car
Camouflage pattern can be varied, patching and coloring varies greatly depending on the overall design, they are somewhat reminiscent of the colors of military uniforms. different countries. The primary task is to decide on the expected color and type of pattern.
Camouflage pattern on a car can be varied
When choosing a color, you should be based on the aesthetic qualities of the option or take into account the tasks assigned to the car. Hunting species are no different attractive design, but help to move without attracting attention. Urban camouflage is used only for decorative purposes, while hunting it is important to ensure stealth and maintain stealth. To make the task easier, let's consider the types of camouflage, at least the most popular options.
Geometric camouflage is popularly called "chopped", its main task is not to increase stealth, rather, the emphasis is on eliminating the visibility of the hull itself, as if it is divided into separate parts with geometric shapes. Figure include various forms and size of figures. Geometric camouflage provides a complex selection and visual assessment of the outlines and dimensions of the vehicle. The most commonly used colors are white, black and grey.
A similar camouflage for a car was originally created for vehicles of the military industry, and modern designers have adopted the pattern. Various parts of the figures were added to it and unexpected colors were used to improve the aesthetic characteristics.
Geometric camouflage Chrysler Crossfire
Pixel drawing
A slightly different look is digital camouflage, as it creates the appearance of having pixels on a surface, like a monitor. Sometimes a pixel art on a car is called “destructive”, as it “breaks” the silhouette of a vehicle. When moving a car, it is difficult to identify and visually assess the distance to it.
Drawing to increase secrecy has a special ratio of spots and sizes, their precise definition depends on the terrain and topography. This camouflage color is suitable for desert regions, mountains and certain types forests. For rocks, black, gray and white shades predominate in color. In deserts, yellows and browns are preferred. In the forest, brown, black and green are more commonly used.
Urban camouflage does not need such tricks, spots can be arranged in an arbitrary way.
forest view
Most often, cars in camouflage are found in forest colors, it does not have high decorative qualities, but it perfectly hides cars in the forest. In the drawing, the largest part is occupied by various shades of green with the addition of black and brown. The camouflage of the forest-type car has soft and smoothly flowing lines. When viewed, the body is difficult to distinguish from the foliage in the forest.
If a person does not set himself the task of maintaining invisibility, you can use different colors, even blue camouflage has the right to life. The choice can only be based on visual preferences and level of imagination.
Forest camouflage on a car
winter drawing
Winter camouflage is great for the cold season when there is snow on the street. Any other type of coloring will give the vehicle away, making it especially noticeable. The camouflage of the car in winter should merge with the snow, therefore, it is dominated by gray and blue colors on a white background. The model can be made with chopped transitions, smooth edges, etc.
More often than not, white camouflage is used for the main task of reducing the visibility of the vehicle, not many people choose it for self-expression. Often used by hunters who spend a lot of time in the forestlands in the north of the country.
Urban camouflage on a car in winter can even include black colors, but such spots should be few. They will help to mask if the snow has gaps through which the ground is visible. What is more valuable for the city: dark spots give a more interesting look.
Hunting civilian camouflage
Another option is to create a car in camouflage, which is suitable for hunters and does not belong to the military style. The picture is dominated by green, gray and yellow colors, it is made to camouflage under the foliage. Such camouflage looks especially impressive and interesting on SUVs; it is ideal for most SUVs. Separate drawings have been developed to simulate deciduous and coniferous forests, jungles, savannahs and various steppes.
Hunting camouflage for cars
A distinctive feature is a functional look, it is attractive for both city cars and hunting jeeps. When reworking the style, an urban car camouflage with hunting elements appeared, it is more stylish and practical.
"Desert Storm"
Yellow and red camouflage is an interesting variety of "desert storm", the model is very popular and allows you to stand out on the road. There are various variations of patterns, but they are all similar to the sandy surface. This look uses smooth lines and partially borrows the pixel camouflage pattern.
This type is most widespread in regions adjacent to deserts, sand embankments, quarries, etc. The style will help to harmoniously fit into any landscape with sand.
Advantages of each type of camouflage
If you still have questions or doubts regarding the choice of pattern or color, it is worth exploring the advantages of camouflage varieties:
- winter. Optimal for winter, the car gets the coloring of white snow and dark spots that appear when the cover is lying for a long time. In other seasons, the car will not have a disguise, but in the city it looks interesting and unusual. The advantage is the minimum visibility of surface contamination, after hardening it is difficult to distinguish the pattern itself and dirt;
- digital. Is the most modern version which is in demand among young people. It is not intended for camouflage, it performs only a decorative function;
- deserted. It is mainly used for people living in arid regions with clay and sandy soils. Particularly effective masks in the autumn, but in other seasons does not contribute to hiding the position;
- forest. Deservedly considered the most versatile, as it is well suited for almost any season, and also does not impair the view in urban environments. Among all the options considered, this is the brightest camouflage.
Winter camouflage for a car
What tools will you need to create a camouflage on a car with your own hands
Car painting always requires pre-training surfaces, providing the necessary tools and purchasing quality materials. The set of tools changes based on the particular kind of drawing.
When painting a vehicle in camouflage color, you will need minimal paint skills. To facilitate the task, it is good to have special stencils. You can do without them, but then the complexity of the work increases.
The contractor in the process of work will need:
- a lot of paper, you can use old notes, newspapers, magazines or unnecessary books;
- a rather large amount of masking tape, preferably with different strip widths. Basically, the process takes 5 narrow and 5 wide tapes;
- more flannel rags, they must be dry and clean;
- 1 glass of gasoline;
- 0.5 l of solvent;
- a special varnish that will open the surface to create a matte and glossy look;
- one halogen lamp with a power of 1 kW;
- ordinary metal spatula, it is better to work with a relatively narrow working surface- 7 cm;
- car enamel is present on the shelves of most stores in the form of a can of high pressure. It will take about 4 pieces of all colors to cover the entire body.
Masking tape for car painting
If you plan to use a stencil, then you first need to decide on the shape and size of the spots. After the reflection stage, you need to stick a vinyl film on the surface or use cardboard, but be sure to take a dense base. These materials will be used to create the drawing. The vinyl film is simply glued onto a one- or two-color body, and a shape is cut out of cardboard and treated with a spray can.
When creating a pattern with a stencil, you will need the same tools and materials as in the first case, as well as:
- construction knife, they will cut the edges of the film;
- a special spray for coating the film during the gluing process;
- rubber and felt squeegees, they will be needed to eliminate air under the film and level it;
- powerful heating device;
- sealant, it is required to fix the edges of the film.
Squeegee for film gluing
Features of preparing a car for painting
First of all, you need to start preparing the area for painting, it must have a roof and good ventilation, since when vinyl is melted, toxic substances are released. In the working box, you need to remove everything superfluous, but it is better to perform wet cleaning. Only now you can start preparing the car:
- heated water with soapy water to remove all contamination;
- wait for the surface to dry completely and remove all body parts that should not be painted. Dismantling of the elements is optional, you can cover them with a film and fix them along the edges with adhesive tape;
- treat with a special degreaser, solvent or gasoline. Care must be taken that dust particles and particles of rags (lint, threads, etc.) do not remain on the surface.
If during surface treatment areas of paint swelling were found, the peeling layer should be removed with a spatula. To facilitate paint peeling, it is recommended to heat the area with a lamp.
Car preparation for painting
How is the process of applying paint to a car when creating camouflage
There are several basic ways to paint a car, each method is significantly different and requires a complete consideration separately.
To create camouflage without a stencil, you need to follow the instructions and be very careful. Application algorithm:
- With the help of narrow tape, you need to draw the spots on the car that the person expects to receive. It is better not to bend the adhesive tape, as there will be paint in places where the sticker is not tightly attached.
- Around the spots, it is worth covering everything with newspapers, they protect the rest of the car from paint and create a clear shape. A wide adhesive tape is used to fasten the paper.
- The darkest shade of the selected colors is applied first. When the first coat is dry, you need to re-spray the coating to enhance the color and reliability of the paint.
- After the final drying of the stain, you need to remove newspapers and adhesive tape. Now the procedure is repeated with new spots. It is preferable to make visits of the second material to the first, so that the pattern merges.
- The second color should be applied in two layers, but first you need to wait for solidification. Most light color it is recommended to apply at the end.
- After the staining is completed, all remnants of the protective coating from the newspapers are completely removed, and an inspection of the work performed is carried out. If there are spots of paint penetration between the tape and newspapers, the coating should be removed with a solvent.
- Auto varnish is applied on top of the body to create a uniform color. It is recommended to add a solvent and a fixative to the composition of the varnish. The varnish should be applied in 2-3 layers.
Painting a car under camouflage
In the case of a stencil, the principle of paint coating is almost the same, key difference is the absence of the need to deal with pasting areas with adhesive tape and paper. Here, a stencil is glued to the same places, and inside everything is filled with paint. The disadvantage of this method is the lack of variety in the pattern, that is, all elements are identical in size and shape. To create a variety of drawings, you need to devote a lot of time to making stencils. A unique pattern and an interesting shape are only possible with a few stencil shapes.
There is an alternative way to create a camouflage, it is also the most affordable and requires a minimum amount of time. Thanks to vinyl film, the body receives additional protection from the adverse effects of the weather and the appearance of scratches.
To apply, follow the instructions:
- Initially, you need to try on the film on the vehicle, just fix it with tape for a while. Using any marker, you should mark the areas where the section will pass. Before cutting, it should be borne in mind that in places with recesses and bumps, you will need large quantity material. Trimming can also be carried out after the sticker, then all areas that should not be glued must be treated with masking tape.
- Apply a special spray on the bonding surface, and then apply the adhesive side to the body. Before drying, you can adjust the location of the film.
- Use a rubber squeegee to remove bubbles from the film. It is necessary to achieve perfect smoothness of the surface without bubbles.
- To improve the adhesion of the film, it is worth walking along the joints building hair dryer. The heater must be used carefully, otherwise there is a risk of damage and melting of the film.
- The greatest attention should be paid to areas with bends, you need to smooth the film over the entire surface as much as possible, and for pliability, treat the surface a little with a hairdryer.
- Taking a felt squeegee, it is recommended to repeat the material leveling procedure. At this time, you can still reheat the film.
- Cut off unnecessary edges of the material with a construction knife and reinforce the edges with sealant to extend the life of the coating.
Sticking film on car camouflage
After coating with a film, you need to give the vehicle at least 12 hours to harden. When the material has set, the process is complete, but it is not worth washing the car for another 1 week.
- to give original look it is worth using large spots with different sizes in the drawing, which pass from one body element to another;
- a special protective surface is formed along the contour to prevent paint from creeping out of the contour;
- it is impossible to start drawing a spot until the previous layer has completely solidified;
- for the integrity of the picture, drawings need to be overlapped;
- each stain must be applied 2 times to prevent color transparency;
- when drawing, you need to move with a can only in a clockwise direction.
Conclusion
The popularity of camouflage can be explained by the main design objective - increasing the secrecy of movement, but is often used only in a decorative role. If you perform the procedure yourself, you can significantly transform the car for little money. An important condition is to maintain balance so that the spots do not occupy more than 50% of the entire area, otherwise the design will deteriorate.
IN last years among car owners, one very interesting trend is increasingly manifesting, which, however, has very ancient roots. So ancient that it manifested itself already at a time when not only a car, but also a person in the current sense did not yet exist.
When there were not enough cars and motorized equipment in general for personal use, in order to stand out from the rest of fellow citizens, it was enough to buy not only the “humpbacked” Zaporozhets, but even a motorcycle. And now you won't surprise anyone dear prestigious car well-known manufacturer, even if it is tuned by special order in an equally famous studio.
Yes, the car is increasingly turning from a means of transportation into a means of self-expression, and progress is moving towards this ancient desire. There are new materials, new technologies designed to make you the owner of an exclusive car for quite reasonable money.
One of the popular ways to achieve this has recently been painting the car in camouflage. Someone likes to fish or hunt, and would like to make the car less noticeable against the background of nature, someone just likes the military style, someone associates the car with some kind of animal ... The idea can take different forms, but about how this is implemented in practice, we will now discuss.
Painting technologies
There are only two technologies on how to paint a car in camouflage: draw by hand and stick the finished film. To some extent, these methods can be combined, giving a gain in the speed of work or in the originality of the result.
As far as hand painting is concerned, it obeys all the same rules as simply painting a car uniformly in one color. In the same way, it is necessary to clean the working room from dust and dirt, provide sufficient lighting, optimal temperature regime, uniform drying of each layer of paint. There is a difference in approaches specifically to applying camouflage spots of various shapes - we will consider this later, in the section on different camouflage schemes.
If the qualification allows or the desire to do something yourself is already bursting, then camouflage on a car can be applied with your own hands, or you can do it by the forces of specialists, however, already for quite tangible money. The first option, on the one hand, may turn out to be more budgetary, and on the other hand, it is guaranteed to be more troublesome. What you prefer is your personal choice, in any case, you will get a unique result, which is what you, in fact, sought.
And of course, all this beauty must be protected - from dust, sand, dirt, fading, aggressive substances, from scratches, finally. There are many options to do this, differing in durability, technology for applying a protective coating, its composition, mechanical, chemical and optical characteristics. It is possible to apply a silicate-based glass-like coating, an epoxy-based coating, but most often camouflage paint is protected with a vinyl coating. It is quite durable, more affordable, has an aesthetic appearance- in general, fully meets the requirements.
Moreover, now the industry also produces two-layer vinyl films for cars under camouflage: the first layer is actually protective covering, and the second, lower one is the same unique camouflage pattern that you otherwise draw by hand. The pattern turns out to be really unique, even if you do not take into account different color schemes - it is impossible to predict in which place this or that car will have this or that spot of the same pattern. And when you consider that an incredible number of texture options are available, then you simply do not have to worry about the uniqueness of the colors of your particular car.
The service life of such a film in gentle conditions of ordinary city driving is on average 7 years, of course, it will be significantly less if the car is designed for traveling through the forest or just off-road. And here we are waiting a pleasant surprise: y this method There is important feature. Vinyl film under camouflage for cars can be applied as a single piece, or in parts, on separate body parts. This simplifies and significantly reduces the cost of restoring the color in case of damage. individual parts body.
There is another important difference between the camouflage film and the coloring applied by hand: if necessary, it can be easily removed, returning the car to its original appearance. Agree, these camouflage stickers on cars are able to win over to their side a considerable part of those craftsmen who, in a different scenario, would prefer to draw everything themselves. Here, if you don’t like the result, you just remove the film and glue a new one, and then you have to fiddle with paints again, smell the solvent and perform a lot of other actions that, if repeated often, can discourage all the desire for any modifications to the paintwork of your car.
What types of patterns do vinyl film manufacturers offer us?
Well, firstly, these are traditional camouflage schemes: winter, sea, forest, desert, city, and so on. Suitable for those who perceive their car as a tank or warship. Agree, the SUV in the coloring of the battleship "Scharnhorst" looks very impressive! And all these schemes have varieties with different sizes of spots and their shape, with different shades of white, gray, green, brown and even blue flowers. Thus, "forest" camouflage is usually almost entirely composed of spots of green, brown and black colors, and any "winter" camouflage for cars in various combinations includes white and gray colors. different shades. There are design options that make you remember the Arctic - sharp lines of broken ice floes, gray, blue and a lot of white ...
Secondly, these are colors similar to the skins of various animals: zebras, giraffes, leopards, and other large cats. By the way, there are films with ready-made drawings such as “lion pride in the savannah”, and with other related subjects. Such paintings on film are much cheaper than those drawn by airbrushing directly on the machine, and they are applied much faster.
Thirdly, these are exotic schemes. lovers computer games and professionals information technologies the so-called "pixel" camouflage may seem interesting. The theme of the image can be any, even absolutely abstract, it is important that the image itself is built as on the screen, from elements the same size And different color- pixels. It looks unusual for a car, because the designers of automakers are trying to smooth the corners as much as possible, make the lines as smooth and streamlined as possible, and not only for aerodynamic reasons - this form also carries a certain aesthetic message. pop-eyed Mini Cooper perceived with a smile, but predatory squinted Mitsubishi Lancer latest releases- with caution, although both are, in general, ordinary city cars. Our attitude to them is formed by the contours of the body, the shape of the headlights, the radiator grille and other details specially thought out by designers based on this or that impression.
And painting a car in camouflage can both enhance and level this impression, the coloring can either match the spirit of your car, or look completely out of place. Agree, a pink Hummer with straziks on the hood looks glamorous, but it completely stands out from the image of a brutal SUV, originally designed for use in harsh military conditions.
Therefore, when choosing colors, including camouflage, it makes sense to be guided not only by impulsive desire, but also by the recommendations of professionals who know how to enhance the desired impression from your car.
Stand out among other motorists or prepare the car for hunting will help special disguise in camouflage pattern. You can use film pasting or quite complicated procedure camouflage paint. And if there is nothing to say about the film - it just needs to be pasted correctly according to the instructions - then the situation with painting is much more complicated. Today we will talk about how to apply camouflage to a car with the help of paint. You might assume that a self-painted car may not look like the cars in professional photos.
The problem is that it will not be easy to paint your car even without using camouflage patterns. But applying several layers of different colors with clear boundaries and not rough geometric shapes sometimes seems completely impossible. Therefore, painting a car in camouflage is considered one of the most difficult options for transforming vehicles. It is worth carrying out this work with a decent understanding of technology and all tools for painting.
We paint the car in camouflage with our own hands - stages and tasks
If you have chosen the option to paint your car, you need to decide on the type of drawing. We will talk about the choice of a pattern below, but for now we will touch on technical aspects task execution. Painting in camouflage requires the performer to understand all the stages painting works. Body preparation must be perfect, bumps are not allowed. The choice of paint is also quite important. In the process of staining, you can apply simple methods:
- applying the main layer of paint, and then curly gluing spots on the car body;
- painting a car in camouflage using an airbrush and artistic enamelling;
- decorative application of dark spots on top of light paint - the so-called urban camouflage;
- overlaying dark spots of paint with a transition to get a smooth flow of one color into another;
- the use of small strokes to disguise a car in an autumn or spring nature landscape.
And if the car is painted in camouflage for decorative purposes, you can use ordinary enamel in medium price category. The use of a car for hunting or off-road requires more quality training coatings. You can watch a video in which experts talk about the requirements of the material, as well as painting methods in this case. To successfully solve the problem, it is important not only to paint the body, but to provide it desired characteristics for use.
Choose a good camouflage color and type for the car
You can learn how to paint a car in camouflage, just watch popular videos on the topic and evaluate the work of specialists. But be careful with such training options, as many video creators tell a lot of false things, while not knowing how to paint a car in camouflage. Choose a drawing pattern that you can recreate with your own hands without the help of specialists.
Film – the optimal solution at a lower cost
For many vehicle owners to paint body parts just impossible. There is no place, skills, tools and other factors for this. But pasting a car does not require special preparation and can be done even on the street in the warm season. In this case, you can choose the most sophisticated car camouflage, the color can be matte or glossy, and the most unexpected and suitable pattern is available. There are a number of advantages to car wrapping:
- a well-chosen film does not fade over time, does not wrinkle and perfectly protects the body;
- the surface of the material is protected from cuts and scratches, which guarantees long-term operation;
- if necessary, in a few minutes, you can dismantle and return the car to its previous appearance;
- no need to worry about how to paint the car in camouflage, as well as overpay for the services of masters;
- preparation takes a minimum of time and consists in a good washing of the body and drying it.
With such a film, camouflage will always be fresh, suitable for the style and features of the pattern. But the film also has its drawbacks. It can look artificial and often unacceptable for functional use. If the question is a decorative change in the appearance of the car, then the best option you won't find. In the end, at any time you can remove the film material, which definitely will not work with the paint layer.
Selection of ideas for Niva - paint the car in camouflage colors
For domestic cars painting is often used, since in this case the body is repaired, its protection against corrosion. Film solutions also protect well, but eliminate the need to wash off old paint, clean everything down to metal and apply additional protection. Painting Niva in camouflage with your own hands can be both very successful and ridiculous. Look at pictures of other people's work to see what it's all about.
Painting must be professional or done skillful hands. And if you can paint a car with metallic paint only in the chamber, then camouflage shades can be applied even on the street. Here the dust is not so much terrible as wrong selection drawing. So before painting it is important to think about proper preparation all factors. Then you can complete all the tasks efficiently.
Summing up
There are dozens of ways to beautifully finish your car. If you decide to apply camouflage on a car yourself, it is better to use a high quality film. Painting will be worthy only with the use of high-quality tools, and also subject to sufficient experience of the performer. Otherwise, the whole idea may not remain the most successful experience in your life.
You should choose high-quality materials, as well as think carefully about the type of pattern. Otherwise, it will not be possible to successfully paint the machine, difficulties and problems will constantly arise in the process of doing the work. It is possible poor quality results, so that all stages of the process must be planned from the outset and all risks assessed. That's the only way you can be sure high quality results.
Owners off-road vehicles very often they try to paint them in such a way as to merge as much as possible with the surrounding nature. This is due to the fact that this color looks very appropriate for hunting, fishing and off-road travel. In urban conditions, a car painted in camouflage looks very stylish and attracts everyone's attention. Thus, camouflage in natural conditions masks the car, and in the city it serves as a means of attracting attention and helps to stand out from the crowd.
Camouflage for a loaf
UAZ cars are very common and popular model domestic SUV. They are often bought by lovers of hunting and fishing, farmers and residents countryside. In the old days, UAZ was one of the most popular vehicles in the army. Therefore, the owners of this brand quite often resort to camouflage painting of their vehicle.
Painting UAZ in camouflage can be done by specialists car service. This will save you from unnecessary trouble, save time, but will require large financial costs.
If you want to avoid extra cash costs and like to tinker with your four-wheeled friend on your own, you can do this work yourself.
Painting of this kind is quite simple - you do not need to be a specialist and have any specific skills. Carefully read the technology and carefully follow the instructions - and you will perfectly be able to do everything yourself.
Preparation and painting of UAZ Necessary materials
Get to work should be fully equipped, so do not forget to stock up on everything you need. In the process of work, you will need the following materials:
- a large number of old unnecessary newspapers;
- wide and narrow masking tape (5 skeins of each type);
- car enamel in aerosol cans: green, black and brown. Quantity - 4 cylinders of each type;
- half a liter of solvent 469;
- plenty of clean, dry flannel;
- 7 cm paint spatula;
- halogen lamp - "kilowatt";
- polishing agent and sponge;
- petrol.
After you stock up on everything you need, prepare the room. You will also need a well-ventilated dry garage free of dirt and dust. Work is best done in summer time to avoid temperature fluctuations.
Preparing the machine for dyeing Preparing UAZ for painting
Every student knows that painting any surface is carried out after removing all dirt and dust. Therefore, the car must be carefully washed with detergent and dry. After that, you should seal with adhesive tape and old newspapers all the places on the car that we want to protect from paint. Headlights are best removed - it will be easier than sticking them with newspapers. We cover windows, doors and all rubber layers with newspapers and adhesive tape.
We degrease the entire surface of the car body. To do this, use a lint-free cloth soaked in gasoline. Experts advise not to use a solvent - it will corrode the main paint and you will get the so-called swollen fur coat.
If such a fur coat is nevertheless formed, we heat this area with a halogen and carefully remove the paint with a spatula. Otherwise, fresh paint will simply peel off in this place after a while.
Primer and car painting Do-it-yourself UAZ painting
After the surface is prepared, we can begin the staining process. It is desirable that camouflage spots be different size and forms. Therefore, it is worth using not a stencil, but an adhesive tape. Let's take a step-by-step look at how the UAZ is painted in camouflage with your own hands:
- We form spots with the help of narrow adhesive tape - it is best suited for this purpose. We paste it according to the size of the planned spot, following the smoothness of the lines and the absence of creases. Paint will get into the creases, where it will leave narrow blots-scratches. If possible, the size of the spots should be large. You need to place them in such a way that they capture different parts of the body.
- We glue newspapers along the edges of the narrow adhesive tape, fixing them with a wide adhesive tape and forming smooth lines.
- We paint the spot with black paint. We are waiting for it to dry completely, after which we apply a second layer of black paint.
- After it dries, remove the tape and newspapers. We form spots under Brown color. We do everything as in the previous paragraphs. Brown spots must be arranged so that they overlap. The paint, as in the previous case, is applied in 2 layers.
- We remove the adhesive tape and newspapers after the brown paint has dried and form spots for Green colour. He is the lightest and may need more than others. Each next layer is applied only after the previous one has completely dried.
Coloring starts with right side cars and move clockwise. Remember the roof and hood - they also need painting.
The above colors are used if we are dealing with factory khaki coloring. If your car gray color, camouflage is best formed from white, gray and black colors.
When working, we make sure that one primary color occupies at least 50% of the surface. Otherwise, you can not avoid trouble with the traffic police.
Coating the car
After finishing painting, it is necessary to cover the surface of the machine with a matte varnish. It will create a rough surface structure.
Next, the varnish is mixed with a solvent and a fixative. Consistency may vary depending on the layer. The first layers are usually more fluid, the last ones are thicker. All proportions when mixing should be maintained according to the instructions.
We apply each next layer of varnish only after the previous one has completely dried, which can be verified with a normal touch with your fingers.
Prevention of a car after painting Conclusion
Painting a UAZ car in camouflage with your own hands - simple procedure which does not require any special skills. For best effect make sure that the spots are of different colors - examples of the pattern can be easily found on the Internet.
In the process of work, try to strictly adhere to the technology, perform all operations without fuss and haste. Don't Forget the Rules fire safety and the presence of good ventilation in the room where the work is carried out.
How conscientiously and diligently you treat your work will depend final result. Remember this - and you will succeed.
