We perform any case work with macbook: replace the cover with a new one, replace the frame, topcase (palm rest), the lower part of the case
Customers value Apple technology not only for its functionality, performance, reliability, but also for its stylish appearance. It is not surprising that even small scratch on the lid of the MacBook can spoil the mood of its owner. Keep in mind that casing defects, such as cracks or badly loosened connectors, can also lead to damage to internal parts. That is why the repair of the MacBook case can not be postponed indefinitely.
Solutions for MacBook Case Problems
It is quite possible to get rid of the appeared cosmetic defects without resorting to radical measures. Problems with mild pollution are also quite easily solved. Dust and debris between the buttons is easy to clean, and stains on the cover can be removed by special means and polishes, in a wide range presented in computer stores. But it is extremely difficult to get rid of stubborn strong pollution with improvised means. It would be wiser to replace the MacBook cover with a new one.
What to do if the MacBook has lost its presentation
The problems may be more serious. So, if the lid has stopped closing, it is recommended to replace the hinges connecting the display and the main part of the laptop with new ones. A damaged (cracked and heavily scratched) case should also not be left.
You can replace:
Bottom cover (bottom case) - the part in which the ports are located;
Top cover (top case) - the part that includes the area for the hands, touchpad, power buttons and keyboard;
Matrix housing (display housing) - the back panel of the display, the part on which the Apple logo is placed;
It should be noted that body damage is often not only a cosmetic defect. For example, if cracks appear on the hinges, fasteners, or loose connectors, their untimely replacement can harm the laptop. Damage to fasteners increases the load on serviceable parts, which over time can adversely affect their condition.
Repair your MacBook case yourself or go to a service center?
Often, when defects appear on the body, the owners decide to replace the worn part on their own. But on sale you can find a lot of fake parts for Apple equipment - low-quality and capable of causing even more harm. In particular, replacing connectors with "non-native" ones can damage external devices, especially in the case of power supply. It is necessary to entrust the repair of the MacBook case to specialists from service center. Only professionals will quickly and efficiently carry out everything necessary work. The undeniable advantage of contacting specialized company is also the fact that the parts necessary for repair are always available. Service center employees have access to original spare parts and guarantee their work.
Cost of services:
Repair cost ~ Ekaterina ~ 16-03-2018
An apple broke on the lid of a MacBook Model A 1502. How much will it cost to repair with a part?
Macsave Center response: Ekaterina, good afternoon!
Unfortunately, it is not possible to change the body part separately. Covers are delivered assembled with a matrix. The replacement cost is 38,000 rubles.
Scratch on MacBook Pro ~ Yaroslav ~ 09-03-2018
Hello, I scratched the back cover on the MacBook Pro 2017 very badly, is it possible to somehow remove the scratch?
Macsave Center response: Good afternoon, unfortunately not, only by replacing the top cover assembly with the matrix.
Dent on topcase ~ Oleg ~ 23-02-2018
Good afternoon
Macbook Air 13". A small dent on the case next to the keyboard. Everything works.
Please tell me the time / cost of repair / replacement.
Macsave Center response: Oleg, good afternoon!
The topcase changes with the keyboard. The replacement cost is 17,000 rubles.
A dent in the lid ~ Christina ~ 11-02-2018
Hello, there is a dent on outside covers (where the logo is) on the MacBook Pro 13 2016. What can be done to remove it? The display itself is intact and fully functional. How much will it cost?
Macsave Center response: Christina, good afternoon!
Unfortunately, the issue is resolved only by replacing the top cover assembly.
The screen is broken ~ Anna ~ 07-02-2018
How much does it cost to replace the top cover with a screen on a mac book pro 2016
Macsave Center response: Anna, good afternoon!
The cost of replacing the matrix is 32,000 rubles. If it is necessary to change the cover assembly, the replacement cost is 52,000 rubles.
matrix cover replacement ~ Sergey ~ 09-01-2018
How much does it cost to replace the matrix cover and the cover itself on macbook air 13 2015 A1466, how long will the repair take?
Macsave Center response: Sergey, good afternoon!
The cost of replacing the cover is 39,000 rubles. Time - several hours.
The lid is bent ~ Konstantin ~ 23-12-2017
Hello! The mb pro 13 fell and the lid went down a little. When closing, it does not close completely, the screen works fine, without any problems. Is it possible to bend the lid and how much does it cost?
Macsave Center response: Konstantin, good afternoon!
Must see. Sometimes there is technical possibility, sometimes not. Bring it in, let's see. Diagnostics is free.
Redecorating~ Darina ~ 11-18-2017
Hello, a small edge of the top cover of the MacBook Air has chipped off, on the rib itself. Is there a way to fix this without replacing the cover?
Macsave Center response: Darina, good afternoon!
Unfortunately no.
Editing-repair of parts ~ Samir ~ 27-02-2017
Good afternoon, scratched the Apple logo on the macbook, it no longer looks aesthetically pleasing. Needs to be polished. Can you do it locally and how much will it cost?
Macsave Center response: Samir, good afternoon!
Unfortunately, the issue can only be resolved by replacing the cover.
Subject ~ Aida ~ 18-02-2017
Hello, the back panel of the MacBook Pro 13 hit detergent and corroded a small part. I would like to replace it. May I know the cost of the service?
Macsave Center response: Aida, good afternoon!
Please specify the year of the device, as well as which part of the case you would like to replace? If we are talking about the top cover, then it changes in assembly with the matrix.
Macbook Pro Retina 2016 15 ~ Konstantin ~ 01-02-2017
The mac book fell sideways and where the black part and it says mac book pro bent a little, it works fine only on the screen there are multi-colored stripes
What part is damaged and can it be repaired?
Macsave Center response: Konstantin, good afternoon!
The matrix cable may be damaged. The device needs to be diagnosed. Bring it in, let's see. Diagnostics is free.
Case on MacBook Air 11 ~ Dania ~ 17-01-2017
He also dropped his hands on the tile. He was very upset. Now it has bent edges and until the end it does not close completely (((
I want to know how much it will cost?
Macsave Center response: Danya, good afternoon!
It is necessary to look at the laptop. Perhaps we can fix something, or replace it. Bring it in, let's see. Diagnostics is free.
Case for Macbook air 13 ~ Antonina ~ 12-01-2017
Good afternoon Tell me how you can solve the problem: the child dropped my poppy, which had never flown before and was not scratched, “dust particles were blown away.” I would like to fix the case (there were dents (0.5 cm) on the top and bottom cover at the corners), Not big scratches from falling. Mac works as before, like clockwork. How can you make him look corrupt? Investments in repairs would be desirable at a minimum. Thanks, I'm waiting for an answer. Ready to come to the service, send a photo of the case.
Macsave Center response: Antonina, good afternoon!
Bring it in, we'll take a look. It is necessary to understand which parts of the case require replacement.
2 small dents from the side of the body~ Elena ~ 12/21/2016
Good afternoon. I recently purchased a MacBook Pro 13 "from my hands. It has 2 small dents on the side of the case, which is why the bottom battery cover does not fit snugly. Is it possible to somehow fix these dents and how much will it cost?
Macsave Center response: Elena, good afternoon!
It is necessary to look at the device. Perhaps we can align the body, or replace it.
Repair of the back cover with a logo?~ Oleg ~ 11/30/2016
How much will it cost to replace the back cover with a logo (together with the part)
Macsave Center response: Oleg, good afternoon!
The top cover is completely replaceable. Specify the model of the device (diagonal, year) and we will be able to orient you on the cost.
Question subject ~ Sergey Yudintsev ~ 26-11-2016
Tell me, how much will it cost to replace the display cover on a macbook pro 13 early 2012? Price with part?
Macsave Center response: Sergey, good afternoon!
The replacement cost is 28,000 rubles.
Repair of the back cover with a logo ~ Alexey ~ 01-11-2016
Dropped my MacBook Pro (13-inch, Mid 2012) and slightly bent the metal. How much will the repair cost, and is it possible to straighten it yourself?
Macsave Center response: Alexey, good afternoon!
Unfortunately, we do not straighten the covers, only replacement is possible.
Macbook pro repair~ Kirill ~ 10/25/2016
The child spilled water on the macbook pro keyboard. What repairs are possible this case? The alt key is stuck (as if it is constantly pressed)
Macsave Center response: Cyril, good afternoon!
In this case, it is necessary to replace the keyboard and clean it after flooding.
Replacing the plastic between the body and the cover - how much? ~ Anna ~ 09-10-2016
Hello, there is a crack on the black plastic, cat. connects the laptop case and the cover on the macbook air 13 "", tell me, please, how much does it cost to replace this plastic part?
Thank you! Anna
Macsave Center response: Good afternoon the cost of replacing this body part is 2500r
Question subject ~ Alexander ~ 03-10-2016
And if you fix the case without replacing the top cover with the display?
Macsave Center response: Alexander, good afternoon!
Bring it in, let's see.
Question subject ~ Alexander ~ 02-10-2016
Hello, how much does it cost to replace the top cover (with logo) on a 2015 MacBook Pro 13 retina? Accidentally hushed up the corner of the case does not affect the work
Macsave Center response: Alexander, good afternoon!
The cover is assembled with the display. At a cost of 35,000 rubles.
display replacement price ~ Oksana Sergeevna ~ 09/26/2016
model A1370, I'm interested in the replacement price together with the spare part
Macsave Center response: Oksana Sergeevna, good afternoon!
The replacement cost is 8500 rubles.
Subject ~ Maria ~ 19-09-2016
Good afternoon
I dropped my macbook air 13", the corner of the matrix housing is slightly bent, the lid does not interfere with closing, but spoils the aesthetic appearance. Can it be straightened or replaced, how much will it cost and take time?
Macsave Center response: Maria, good afternoon!
You can't fix it, you can only change it. Depending on the laptop model, the cost will be about 30,000 rubles.
bottom part replacement macbook cases air 13 mid 2011~ Andrew ~ 14-09-2016
Good afternoon The Mac fell on a corner, hitting the bottom left side the most where the keyboard and touchpad are located. How much would it cost to replace the bottom of a laptop?
Macsave Center response: Good afternoon. Replacing the topcase on your Macbook will cost 8900r, we will do it within 2-3 hours
I will bend the cover ~ Maria ~ 03-09-2016
Hello, I have a macbook pro 2015 crashed. It has a slightly bent corner of the lid and now it does not close completely. How much will the repair cost?
Macsave Center response: Maria, good afternoon!
Please specify the device model.
Screen gone ~ Dmitry ~ 19-08-2016
Good afternoon. Faced such a problem: the lid of the laptop just fell apart. How much will it cost to glue it? Or do you need to buy a spare part?
Macsave Center response: Hello, what model of macbook do you have?
The cost of spare parts and work ~ Alexey ~ 07/27/2016
MacBook Air 13 (2015 or 2016, I don't know exactly).
How much will the bottom and top covers cost with replacement work.
Macsave Center response: Hello Alexey, 35 000r upper 8000r lower.
Sincerely,
Manager Vasily
Housing replacement ~ Mirek ~ 04-07-2016
Good afternoon
Can you tell me Macbook Pro mid12 A1278 the cost of replacing the matrix cover along with the part?
Macsave Center response: Good afternoon, please specify the model on the bottom cover of your laptop
Body replacement ~ Stanislav Potapenko ~ 18-06-2016
Good evening, I'm interested in replacing the case in a macbook pro 15 "back cover, how much does the spare part cost and if not, how long to wait?
Macsave Center response: Hello, please specify the model of the laptop, the screen cover or the bottom cover?
Hull defect.~ Mirai ~ 06/13/2016
Hello!
Macbook Pro Retina mid 2014 fell while in a bag The geometry between the top cover and the top case was slightly broken (when closed, you can see that they do NOT completely match (discrepancy of about 0.5 mm). Can this defect be fixed and what is the cost of work?
Thank you
Macsave Center response: Good afternoon, perhaps the hinges connecting the bottom of the laptop and the screen are crumpled, it is also possible that the matrix cover is bent, in this case we recommend that you come to us, we will inspect it and tell you the cost of the work, our diagnostics are free.
Replacing the bottom side cover of the Mac Book Air 13 case, how much will it cost? ~ Rodion ~ 02-06-2016
I dropped a Macbook Air 13, the back cover of the case was bent, how much will it cost?
Macsave Center response: Good afternoon, new 4900r, used 3000r good condition
a dent near the charging connector ~ Alex ~ 05-28-2016
MacBook pro 2014. Fell on its side and the place where the charging connector was wrinkled. The poppy itself does not close completely. How much will it cost?
Macsave Center response: Good afternoon, you need to look if editing is not possible, then only replacing the topcase from 8000r
bent laptop case ~ Eugene ~ 05/22/2016
MacBook air 13. I didn’t pay attention when I bought it, but when I came and worked, I noticed that the laptop was not standing straight, but swaying at one corner, that is bottom corner slightly bent. It does not affect the work of the laptop, but it is annoying. The store refused to change, since I already registered it. Can it be fixed and how much would it cost? And does it make sense to order with such a defect independent expertise and try to get it back?
Macsave Center response: Good afternoon, it is worth returning the best
Housing replacement ~ Piotr ~ 03-05-2016
How much would it cost to replace the top case, matrix cover, and back cover on a 2012 MacBook Pro 13, total cost including parts and replacement labor?
Macsave Center response: Good afternoon, Replacing the topcase 6000r, matrix covers 11-17tr, bottom cover 3500r
Hull replacement ~ Igor ~ 04/10/2016
Good afternoon. Interested in the cost of replacing the case and so-pad on macbook air 11 2010.
Macsave Center response: Good afternoon, have sent you an email.
MacBook Pro 15 Retina mid 2012 top cover replacement ~ Mikhail ~ 03-27-2016
Hello! What is total cost replacing the top cover of the matrix? How much would it cost to replace the bottom case?
Thank you!
Macsave Center response: Good afternoon? top cover 15 year 55000r, and 12 year 39000r, lower part 5000r
macbook topcase replacement 15 mid 2015~ ed ~ 10-03-2016
Good afternoon!
How much does it cost to replace a macbook 15 mid 2015 topcase?
Macsave Center response: Good afternoon, depending on which Mac model you have, from 10000-15000r
Question subject ~ Victoria ~ 10-03-2016
Good afternoon, on my MacBook, the edge of the case is bent (this is where the screen is), how much does it cost to repair or replace the case. Everything else is whole. thank you in advance.
Macsave Center response: Hello, I need to know the model of the laptop
replacement of the top case and bottom cover (which is screwed on) ~ Anton ~ 05-02-2016
Good afternoon, what is the cost of replacing the top case (there are only aesthetic flaws, the apple is on fire.) And the bottom cover with screws on Macbook Pro 2011 17 inch. Thank you
Macsave Center response: Good day! In this moment there is only a Topcase panel, the cost is 14000r with a replacement
Subject ~ Artem ~ 15-01-2016
Hello! I have a MacBook 2015 12.5 on the corner where the keyboard is very bent corner. How much does it cost to replace the top of the macbook (which has the keyboard and touchpad?
Macsave Center response: Good afternoon, there is an English layout, the cost with work is 17000R
Replacing the top cover of the MacBook Pro 13 retina 2015 ~ Daniel ~ 08-01-2016
Hello, the MacBook Pro 13 2015 recently fell. I bent the top corner of the top cover (not much). What is the cost of the cover and labor?? Without a matrix, but just a cover. Or is there a way to fix it??? Thank you.
Macsave Center response: Good afternoon, your matrix cannot be rearranged to another cover, you need to look at the cover to fix it. Cover with a matrix costs 25000r
Subject ~ Dmitry ~ 29-12-2015
Hello, tell me please, I bought a new macbook air13 2015 after about a month of use, I began to notice that the case clicks, it feels like the bottom cover is not screwed on well. Is this some kind of breakdown or marriage?
Macsave Center response: Good afternoon and happy new year to you, you probably need to fix the hinges. Come take a look and we'll fix it if needed.
macbook air 13~ Julia ~ 08-12-2015
Hello. how much does it cost to replace the cover with an apple assembly (although the matrix is working)? Thank you!
Macsave Center response: Good afternoon, the cost of replacing the cover: new - 35000r, a little used in good condition 24000r
Spare part cost ~ Christina ~ 07-12-2015
Good afternoon. Please tell me the cost of the cover assembly with matrix for MBP 13" early 2015 mf839
Macsave Center response: Good afternoon, the cost of replacing the entire cover on your Macbook Retina is 35000r, replacing the matrix will cost 15500r
Macbook Air touchpad~ Alexey ~ 11/24/2015
Good afternoon the sensitivity of the upper half of the touchpad of the MacBook Air 13 2013 has greatly deteriorated. The movement of the cursor with one finger understands through time, but does not perceive gestures at all. the bottom is working fine.
Tell me, please, is it necessary to replace the touchpad? and how much will it be?
Macsave Center response: Good afternoon, I need diagnostics, because this action of the touchpad can be affected by a swollen battery, if you change the touchpad, then the cost is 3-4 thousand, depending on the model of the wheelbarrow
Is it possible to align? ~ Umed ~ 03-11-2015
Macsave Center response: Write to mail
Is it possible to align? ~ Umed ~ 02-11-2015
Is it possible to align the corner of the case instead of replacing it???
Macsave Center response: You need to look at what happened, how jammed
macbook air 13 model 1466 ~ Julia ~ 02-11-2015
Hello. Can you please tell me how much it will cost to replace the topcase on this laptop? cosmetic defect. Keyboard and touchpad are fully functional.
And another question, does the lid with an apple change without a matrix? also a cosmetic defect. Thank you!
Macsave Center response: Good afternoon, the cost of replacing the topcase is 6500 rubles with the transfer of the keyboard and touchpad. The lid with an apple simply does not change without a matrix.
Cosmetic repair of Macbook air 11 ~ Yuri ~ 10-18-2015
Hello!
How much does it cost to replace bottom case, top case and display housing on macbook air 11?
Thank you in advance!
Sincerely,
Yuri
Macsave Center response: Good afternoon, Spare parts: lower part 2900r, topcase without keyboard 2500r, top cover only with matrix -18000r.
Replacing the top cover of macbook pro 15 retina A1398 ~ Pavel ~ 16-10-2015
How much does it cost to replace the top cover with a pro15 retina A1398 without a matrix, is it working? Interested in the price of labor and parts.
Thank you
Macsave Center response: Good afternoon, the cover comes with a matrix and the replacement cost is 35000r
Hull repair.~ Abay ~ 09/26/2015
I have a MacBook Pro 13 2011. During use rear end screen (where the bullseye glows) has been significantly damaged (scratched). Is it possible to replace only this part of the case?
Macsave Center response: Good afternoon, the cost of replacing the back cover is 9000 rubles
~ Artur ~ 24-09-2015
Good afternoon Formed small chip(something hurt) on the edge of the bottom of the MacBook 2015 Retina (gold), can this be somehow cosmetically corrected? If yes, approximately how much would it cost?
Photo link: https://www.dropbox.com/s/m6c76bcz1qfknqy/photo%2024.09.15%2C%2010%2053%2030.jpg?dl=0
Thank you!
Macsave Center response: Good afternoon, unfortunately we do not carry out such repairs.
Loose macbook screen hinges~ Kirill ~ 09/23/2015
Hello
How much will it take to tighten the hinges of a loose screen on a Macbook pro 15 retina
+ completely dust free
Macsave Center response: Good afternoon, the cost of a complete cleaning is 2300 rubles, the loops will be included in the cost of cleaning if they are weakened, as always, on a lowland
topcase lid repair ~ konstantin ~ 16-09-2015
hello, such a problem .. put a perfume bottle on the macbook keyboard, crumpled two keys and left a dent on the case between the keys .. question price ?? (the dent is not big)
Macsave Center response: Good afternoon, 2 keys 600r and editing the case from 500 - 2500r maybe it’s a breeze to remove the keyboard
MacBook Pro A1278~ Anna ~ 03-09-2015
Tell me, how much does it cost to completely change the case for a MacBook Pro A1278, taking into account spare parts?
Macsave Center response: Good day, specify which parts need to be changed, because they are all quite expensive
Replacing the lower part of the case on a Macbook mid 2010 ~ Andrey ~ 09-01-2015
Hello! is there a new one in stock, and how much will it cost with the work?
Macsave Center response: Good afternoon, specify the model, if A1342, then it is currently missing.
Replacing the bottom cover and screen frame ~ Vitalik ~ 08/23/2015
Good afternoon How much does it cost to replace the bottom cover of a 2013 MacBook Air 13-inch model A1466 and screen bezel? As well as the cost of the parts themselves.
Macsave Center response: Good afternoon, bottom cover with replacement 2700r, frame for Air A1466 with plywood work 3500r
Replacing the top cover of Macbook Air 13 ~ Anna ~ 07-29-2015
Good afternoon The top cover needs to be replaced (the edge of the cover was bent when it fell, the screen is fully functional). Write if you can replace, terms, prices. Thank you!
Macsave Center response: Good afternoon, the cost of replacing the cover is 29000r, there is a very good good condition for 19000r
Cracks on the macbook pro hinge that holds the screen ~ Mikhail ~ 07-22-2015
Is it possible to replace the hinge without changing the screen and, if so, how much will it cost in total?
Macsave Center response: Good afternoon, the loop can be replaced, but you need to know exact model and the year of your Mac.
corner bent ~ Maxim ~ 03-07-2015
Hello,
Slightly bent corner of 2011 MacBook Air 11.6" closing lid.
tell me what can be done?
Thank you
Macsave Center response: Good afternoon, you need to see if it can be straightened, otherwise change the cover
Subject ~ Olga ~ 06-06-2015
Hello! A bolt from the bottom cover of the MacBook was lost (I don’t know the model number, but I think it’s 2012, white and with a white keyboard). From the fact that it became very hot, the lower plastic coating was deformed, from this the laptop does not stand evenly. Is it possible to replace or restore this part? The price of the question is also interesting! :)
Macsave Center response: Good afternoon, the cost of replacing the bottom cover is 6000 rubles.
MacBook Pro 15 case replacement ~ Alexey ~ 03-06-2015
Good afternoon
Dropped my MacBook Pro 15 (manufactured in 2011, model A1286, serial number C02GH2RVDRJM) To be replaced: display housing, top case, bezel around sensor. Please let us know the availability, the cost of components and work, the timing of the work. Is it possible to purchase components separately, because. live in Samara
Regards, Alexey.
Macsave Center response: Good afternoon, the cost is commensurate with a used laptop 25,000 rubles
How much does it cost to change the cover where the apple macbook pro retina 2012 ~ Alexander ~ 31-05-2015
A scratch has formed. How much more time will it take. Thank you!
Macsave Center response: Good afternoon, the cost of replacing the cover is 28,000 rubles
Replacing the lower part of the case ~ Eugene ~ 05/26/2015
macbook pro 13.3 retina mid 2014
Replacing the lower part of the aluminum case including the bottom cover with legs.
Macsave Center response: Good afternoon, the cost of replacing the topcase is 9000 rubles, the lower part is 2500 rubles
Repair cost and time ~ Dmitry Malyhin ~ 05/26/2015
How much will it cost to replace:
MacBook Pro (Retina, 13-inch, Late 2013
topcase, back cover
Macsave Center response: Good afternoon, for the repair of your macbook: Topcase replacement - 7000R, Bottom cover - 2000R, cover with a matrix 26000R, without a matrix 15000R
Housing replacement ~ Alexey ~ 05/17/2015
macbook air 11.6 inch! dropped, the corner of the back cover of the matrix bent where the logo is, and not a big dent on the case where the keyboard and touchpad are, how much will it cost to replace these two parts of the case ???
Macsave Center response: Good day, the lid changes with the matrix, maybe you can peel it off without damaging it, the cost is 18000 rubles, the replacement of the topcase is 6000 rubles
Replacing the cover on a macbook 2013 late retina 13 inches~ Nikita ~ 05/14/2015
How much will it cost to replace the back metal cover without replacing the matrix and glass (where the logo
)
Macsave Center response: Good afternoon, the cover can only be changed as an assembly, because yours cannot be re-glued to a new one, the display will delaminate when peeled off. You can glue a new matrix into your cover. We can install a cover assembly with a matrix for 18,000 rubles
rear panel replacement~ Alice ~ 04/20/2015
Need to replace bottom case on pro 13 inch model, plastic macbook
Macsave Center response: Good afternoon, the cost of working with a spare part at the moment is 11000 rubles
Bent bottom ~ Dmitry ~ 04/12/2015
Good afternoon. Macbook unibody tag. Bent bottom and a little top. Not critical, but annoying. How much will it take to change everything and is it possible to paint or engrave the case?
Macsave Center response: Good afternoon, which parts do you need to replace and indicate the exact model of the laptop
MacBook Air 13 Model 1466 Screen Cover Replacement ~ Alexander ~ 11-04-2015
Hello, is it possible to change the cover with the apple logo on a MacBook Air and how much will it cost?
Macsave Center response: Good afternoon, it is possible to replace, but only with the matrix together
Matrix Cover, Space Button ~ Stanislav ~ 08-04-2015
The corner of the matrix cover is slightly deformed, does not interfere with closing. is it possible to edit? And how much will a replacement cost?
How much will replace the spacebar button?
Macsave Center response: Good afternoon, to understand whether it is possible to fix it, you need to see the masters, the cost of replacement depends on the model of the macbook, the cost of the button is 300r
topcase & loop replacement ~ Roksana ~ 08-04-2015
Hello, Macbook Air a1369 (13-inch, 2010), the topcase is crooked, in fact, as in the photo above, but not so much, but there is a small crack. Is it necessary to replace, or can it be leveled (beauty is not important, it is important that the bottom panel fits snugly again)? Even after this damage, the lid began to close unevenly (when you close it, it is shifted by 1 mm), does this mean that it is necessary to change the hinges? Or is it possible, again, to do without replacing parts? Please tell me the cost of repair/replacement of the topcase and repair/replacement of hinges?
Macsave Center response: Good afternoon, you need to inspect the macbook, it’s quite possible that it’s not the hinges that have crooked, but the matrix cover or topcase and you need to change something of them.
Repair ~ Stepan ~ 07-04-2015
Good afternoon. I have a MacBook Retina A1398 EMC2745. I need to replace the top aluminum display cover and protective glass. How much will the parts cost separately and the scotchl will cost the work separately. Everything is fine with the matrix. Thank you.
Macsave Center response: Good afternoon, the glass comes with a matrix, if you change it the cost is 19000r, if you change it assembled with a cover 35000r.
Replacing the matrix body ~ Ekaterina ~ 03-29-2015
Good afternoon,
I would like to replace the matrix housing (the one on which the logo glows) with a Mac Pro 15"". Is this possible and how quickly is such a repair possible?
I would also like to clarify whether it is possible to diagnose hidden damage? The poppy was dropped onto the asphalt from a height of about 1.5m. It works, but I'm worried that there might be some hidden problems.
Thank you in advance,
Catherine
Macsave Center response: Good afternoon, the cost of replacing the cover depends on exact year macbook, diagnostics of other elements is free.
Replacing the bottom cover ~ Arseniy ~ 03-29-2015
Hello!
I have a very large dent in the bottom cover of my MacBook Pro 2010 retina 13.
Can it be replaced or straightened (which is unlikely) and how much does the replacement and the part itself cost?
Thank you in advance)
Macsave Center response: Good afternoon, the cost depends on the model in 2010 there was no Retina, write the exact model
question ~ Dima ~ 03/21/2015
I want to replace the bottom cover on what the laptop is on. I have a macbook pro retina 13 inches
how much will parts and labor cost?
Thank you!
Macsave Center response: Good afternoon, the cover for your MacBook is in stock
How much does it cost to replace the enter button
Macsave Center response: Good afternoon, the button for your Macbook is available, you can purchase a key or part of it ONLY in our MacSave service center at Moscow, Myasnitskaya st., 22 of 228, 1 key - 300r with installation
Subject ~ Sasha ~ 15-03-2015
How much does it cost to replace the back panel of a macbook air 2013
Macsave Center response: Good afternoon, the cost of the lower part is 3700r along with work
Replacing the bottom cover of the MacBook Air 13, 2012 ~ Daria ~ 11-03-2015
Hello, can you please tell me how much it will cost to replace the back cover of a MacBook Air 13?
The cover is in almost perfect condition, only in the left right corner, where the bolt is screwed, the cover is clamped. Is it possible to fix it somehow?
Macsave Center response: Good afternoon, the cover for your MacBook is available, but you can fix yours
Cover replacement for Macbook Retina 13.3~ Vlad ~ 02/24/2015
How much does it cost to change the matrix assembly with a cover on a Macbook Retina 13.3?
Macsave Center response: Good afternoon, the cost of replacing with a cover on a MacBook A1425 is 26,000 rubles, if only the matrix is 18,000 rubles
Housing replacement ~ Diana ~ 10-02-2015
Hello, how much will it cost to change the case on a macbook air a1237? bent corner on the top cover and on the bottom
Macsave Center response: Good evening, the cost of replacing the case is 6-8 thousand rubles, depending on the necessary parts.
Loop tightening ~ Nikolay ~ 01/27/2015
Good afternoon
Tell me, please, how much will it cost to tighten loose hinges on mbp retina (late 2012), model A1425?
Macsave Center response: Good afternoon, disassemble the cover and tighten all the fasteners of your poppy 1600r
dent ~ denis ~ 13-01-2015
how much would it cost to fix a dent in the bottom of the case? the dent itself is small, about 2 cm in diameter
Macsave Center response: Good day, in your case, editing the case from 500 rubles, depending on the complexity
Topcase replacement ~ Anna ~ 12-01-2015
Good afternoon
How much will it cost to replace a topcase with a macbook pro retina?
Macsave Center response: Good afternoon, the topcase for your Macbook is available, 11300r with installation
Macbook pro cover replacement 2012~ Andry ~ 22-12-2014
Hello. Everything is fine with the display. There is a scratch on the lid that can no longer be removed or hidden. Is it possible to change only the lid without the display separately on the 2012 model (mac pro)? How much will it cost approximately?
Macsave Center response: Good day, the cost of replacing the cover is 11000r
Mechanical damage lids ~ Alexander ~ 20-12-2014
The corner of the lid is flattened, which is why the lid does not fit snugly (not along the perimeter) to the case when closing. What are the solutions? Can the angle be straightened or does it need to be changed? I have a MacBook Air 2013
Macsave Center response: Good day, you must try
macbook pro 15 case replacement ~ Ekaterina ~ 12-17-2014
Good afternoon. I would like to replace the Top Case and matrix cover) MacBook Pro 15 (MacBookPro9,MD103xx/A). Due to the fact that on the case, due to the debris getting under the cover, there were numerous terrible scratches. Is it possible to do this and how much will it cost?
Macsave Center response: Good day, it is possible to repair, the cost will be 15500
rear panel replacement ~ Alice ~ 15-11-2014
Good afternoon
The back panel on my MacBook is coming off, I want to make a replacement, will it cost 490 rubles? right? I also want to know the cost of cleaning from dust. Thank you. Please call me back, 8915 210 32 54 Alice
Macsave Center response: Good afternoon, come and have a look and make a diagnosis
Hull replacement ~ Sergey ~ 12-11-2014
How much will it cost to replace the whole case plus protective glass on a macbook pro 15 late 2011?
Macsave Center response: Good afternoon, the glass for your Macbook is in stock
Replacing the glowing apple on the front cover of the MacBook ~ Victoria ~ 03-11-2014
Good afternoon, the apple on the front cover of the macbook crashed, is it possible to replace only one luminous apple, and not the entire front cover? How much is it?
Macsave Center response: Good afternoon, the replacement of the apple depends on the model of the macbook, because on some models the apple is changed only by the lid assembly with backlight or with a matrix, as it does not peel off.
Macbook Pro Recovery ~ Nikolay ~ 15-10-2014
Hello. Water got into the vent and something burned on the motherboard. Question two:
1) How much can such a repair cost (starting from the minimum to the average, because the upper limit is known - this is the cost of a new motherboard).
2) If you buy a new board, it's better with an upgrade. Question - will the board from a1278 2012 fit into the a1278 2010 case? Visually, they seem to be similar Good afternoon, replacing the entire cover costs 19000 R, there is an option to put our cover removed from the laptop in good condition and a new matrix for 13500 R. ~ Alexey ~ 04-21-2014 ~ Anna ~ 01-26-2014
Hello! I didn’t keep track, a small one appeared, but deep scratch on the top cover of macbook air. Is there a possibility to fix this? Polish or lubricate...? I do not want to change it completely with the screen because of such a trifle.
Macsave Center response: Good afternoon, it is possible to sand and polish the scratch a little, but a speck may appear which is visible at an angle, if necessary, into the lid in perfect condition, then you will have to change the entire cover with a matrix on your MacBook Air. If you change only the cover, then due to the fact that the matrix is glued into the cover on the latest Airs, traces may remain under the film.
Repair price for hinge repair macbook pro 13 a1278 ~ Nikita ~ 13-01-2014
Good afternoon How much will it cost to repair a "loose cover". As far as I understand, it's about loose hinges. http://support.apple.com/kb/SP649 - here is my laptop spec.
Macsave Center response: Good afternoon, perhaps in your case it will be enough to tighten the matrix loops and the problem will go away, pulling up and pulling the loops on your Macbook pro 13 a1278 costs 2000 rubles.
Broken corner on Macbook Air 13 needs to be repaired ~ Sergey ~ 12-22-2013
Recaptured right rake angle on Macbook Air 13.
Is it possible to fix this defect?
Macsave Center response: Hello, please specify the model and year of the laptop, preferably a photo by mail info@site, in order to understand whether we need to change or we can repair the macbook case.
The top cover jammed and the matrix with the screen on Mac 13 crashed Retina~ Alina ~ 12/22/2013
Hello, I destroyed an open Macbook retina 13, as a result, the back cover and windshield the lid is damaged, the lid is jammed, and the glass is broken, but everything shows, tell me how much the repair costs?
Macsave Center response: Good afternoon, we need to inspect the laptop in order to determine whether it is possible to fix the jammed matrix cover or whether it will have to be changed in case of replacement protective glass with a matrix, the cost is 11,000 R, and in the case of replacing the entire cover with a matrix on an A1425 laptop, the cost will be 18,000 rubles. As for the cost of repairing the cover, it will range from 500 to 2500 thousand rubles, depending on the amount of work.
MacBook Pro Retina wrinkled ~ Nina ~ 20-11-2013
Good afternoon I have a problem, the back right corner of the laptop is dented, and with it the usb 3.0 and HDMI port. Is it possible to straighten this rather than replace the entire bottom cover, and how much would that cost?
Macsave Center response: Hello, in your case, the most important detail is changing - the top case of the MacBook Retina where the motherboard is installed, the cost of replacing it with 13 inches is 10 thousand rubles, with 15 inches - 14 thousand rubles.
If the hull is repaired, the cost will be from 2 to 5 thousand rubles, depending on the complexity.
Housing poppy beech a1278, repair replacement DVD ~ Ivan ~ 08-11-2013
Good evening, macbook pro 13 2012, the question is to replace the drive or to repair it, so it stopped giving out disks after a fall, there is also a small dent on the matrix roof on the body, scratches and chips, it is required complete replacement covers or is it fixable? The price of the issue?
Macsave Center response: Hello, replacing the drive 3500 - 4500 R, it all depends on the drive model, repairing the cover is extremely difficult, so it's better to change it.
Cracks on the panels of the macbook, broken? ~ Maxim ~ 02/15/2013
Hello, I need the help of competent professionals. I noticed small cracks on the hinges of the Macbook Air laptop. What do you recommend to change them. If yes, approximately how much would it cost. And how long does it take to replace. Thank you in advance. Hope for your help...
Macsave Center response: Good afternoon, if you have an a1237 or a1304 model and there are cracks or the matrix mount on the macbook air has already broken, you need to urgently replace these loops, if this is not done, then the matrix cable will most likely break and this will lead to short circuit and more expensive repairs. Please specify the exact model of the macbook and we will be able to tell you the price for replacing or repairing the macbook air hinge
Replacement of body parts for Apple MacBook Pro 13"" Retina A1425 md213~ Maxim ~ 02/15/2013
Hello, I want to sell my Pro MD213, but it lost its presentation in a year, I need help. I want you to replace the top and bottom covers of the laptop. Well, look at where the scuffs are, too, if possible, replace. Thank you...
Macsave Center response: Good afternoon, you have an Apple MacBook Pro 13"" Retina A1425 year 2012-2013 laptop, if you mean the replacement of the topcase where the keyboard and the part that closes the macbook from below, then the price for replacement is as follows: topcase (palmrest) on a1425 costs 9000 rubles, and the bottom cover (pallet) - 3500 rubles, the work to replace these parts costs 2000 rubles. Turning to us, your MacBook will be like new!
After buying new valve stem seals work to replace them should start at cold engine when the oil is completely glass in the engine sump. Take off first valve cover. When removing the timing cover, be careful not to damage the gasket. Some pick a sticky cover with a flat screwdriver, thereby spoiling the gasket. The right way- this is a palm strike from the side and it will move away. If it does not move away, gently tap on the edges with a hammer. How to change valve stem seals gasoline engines, and they do it on diesels.
What are oil seals for?
in engines internal combustion the lubrication is combined, that is, the oil gets on the necks camshaft under pressure, and the rest of the design is splash lubricated.
When the engine is running, the top of the cylinder head collects enough engine oil to coat the top of the valve guides.
The function of the valve stem seals is that they do not allow the oil accumulated at the top of the head to drain over the valve stems. If the caps are worn out, then the oil flows through the valves directly into the working combustion chambers of the cylinders, hence the thick smoke from the muffler. The wear of the caps occurs gradually. Due to the high temperature of the engine, the rubber caps eventually do not fit snugly against the walls of the valve stems and the oil begins to flow down.
Which valves are burning?
Exhaust valve works in more high temperature. Therefore, when the valve stem seal is worn out, the oil flows onto the chamfer of the valve head and at high temperature it burns out, forming carbon deposits on the valve head. Then this soot flies off and sometimes the valve cap is perforated or chipped off at the edges. 
As for the intake valves, even if the caps do not hold oil, it simply flows into the cylinder without consequences for the valves. The operating temperature of the intake valves is not so high, so the intake valves do not burn out.
Signs of wear on valve stem seals
Oil seals are rubber seals, which are put on the necks of the valve stems and protect against oil leakage into the cylinders.
The signs of wear are:
- Increased consumption engine oil. If the rubber seal does not hold, then the oil goes into the cylinder, therefore, the total volume of oil decreases, which after a while will be noticeable on the dipstick levels. Oil consumption is not necessarily a sign of worn rubber caps. Oil may go away and when replacement is required oil scraper rings. Perhaps they stuck to the piston, this is also called "lay down."
- Right after engine start bluish smoke is observed exhaust gases. This effect occurs when oil accumulates on the piston. When the car was not running, the oil glassed into the sump and along the piston rod through a broken valve stem seal.
- Sometimes the engine stalls. Tripping occurs when one candle does not spark at the right time or does not spark at all. If oil enters the cylinder, the spark plug will splatter with oil. This can be checked by unscrewing the spark plugs. If the base of the candle is in soot and in oil, then this is a sign of wear on the caps.
Various additives are useless in these cases. It is better to quickly replace the failed parts.
Replacement tools
If you decide to change the caps with your own hands, then you will need the following tools:
- hammer;
- valve cracker;
- a set of heads with a collar;
- a set of cap and open-end wrenches;
- tweezers;
- collet clamp for removing caps;
- silicone sealant or new gasket timing;
- mandrel for pressing caps.
How to replace oil seals without removing the head
- Remove the valve cover, aka the timing cover.
- Set the crankshaft and camshaft to the marks.
- Write down to take a photo, which pipe, where you took it from (for those who are for the first time).
- Loosen the timing belt tensioner.
- If instead of a belt there is a chain, then you need to unscrew and remove the chain drive gear. It is better to remove the key from the groove so as not to lose it.
- Unscrew the fastening of the bed and remove camshaft with cylinder head.
- Inspect journals and cams for wear.
- It depends on what design, removing the rocker arms or glasses from the hydraulic lifters, it is necessary to remove the valve lifters.
- Pistons 1 and 4, after setting the shafts according to the marks, are in the upper dead spots(TDC). Therefore, we begin to change caps 1 and 4. To crack the valve, it is required that it rests on the piston.
- There are designs where intake manifold makes it difficult to install a dryer. But, than to remove the collector, it is easier to shorten the cracker.
- The cracker bracket must be fixed on the bed fastening pin. And attached in the middle part, put the ring on the plate of the spring valve. Next, with one hand we press on the lever of the cracker, and with the help of tweezers we pull the crackers out of the plate.
- Remove the crackers and remove the poppet spring valve.
- We install a collet puller on the cap. We lift the weight up the puller rod and hit it on the upper stop. In this way, the oil scraper cap is removed.
Perhaps it is not entirely clear from the text how this is done. To do this, under the article there will be a video on this topic.
How to install
- Remove springs from caps.
- Place the cap in the mandrel and lubricate the valve stem with a drop of oil.
- Put the stuffing box together with the mandrel on the valve stem and move it down to the special seating ledge of the guide. With a hammer, not with strong blows on the frame, press it into the seat for it.
- Put the spring on the installed cap.
- Install the valve components and dry it with the same action using a puller as you removed it.
- Do this for all caps.
- If there are no hydraulic compensators in the motor device, then after working on replacing the caps with your own hands, you need to adjust the valves.
There are a lot of great new things out there right now. For example, there are special additives that can restore oil seals. It would seem that he filled it in and everything, all the worn rubber bands were restored. But, in practice, this is impossible. According to reviews, additives, on the contrary, increase the penetration of oil into the cylinders.
Video
In this video, replacing valve stem seals on a VAZ.
Remove the valve seals without removing the cylinder head.
How to make a do-it-yourself puller for valves from a mounting gun.
How to work fast.
Ancient iPhone back cover 4 is simply replaced.
It often happens that a beloved device has various scuffs, chips or scratches on the case. Not a single person is immune from this, while a variety of devices (cases, bumpers, etc.) do not always help out from similar damage. Including the iPhone 4 rear The lid is not durable. An iPhone repair was carried out in Novosibirsk, which involves replacing the back cover, maybe in a service center: specialists will quickly and perfectly return the original appearance of the phone.
With all this, it can be changed at home, but for this you should know the specifics of the process itself. Many people have been doing this type of operation alone for a long time, but before you start for the first time, it does not hurt to search the Web for information on this topic. Most likely, there will be plenty of it.
This article provides a step-by-step annotation on how to remove the rear cover iPhone without the help of others. After examining it, the owner of the i-gadget will be able to give newest life your own device.
iPhone 4 repair: How to replace the back yourself cover iPhone 4 / iPhone 4 back cover replacement
Attention! Before you start work, you should evaluate all the dangers, because there is a possibility of inadvertently destroying something. The website administration is not responsible for the mistakes of users who have damaged their own communicator.
Replacing the back cover of the iPhone - step by step summary.
The first photo shows iPhone back cover 4 is what it is. In order to remove it, you need to unscrew the bolts located on the bottom of the frame.
Here is the lower face of the accessory, on which the screws are placed. If you look closely, it becomes clear that rear the iPhone cover should only be changed if there is special tool, since the hats have grooves in the form of five-pointed stars.
Having obtained a suitable screwdriver, we proceed to unscrewing. I have an iPhone 4 rear the lid will not move differently, while for many other models this is much easier to do.
After all the bolts have been unscrewed, they should be put aside so as not to be lost inadvertently, because they have to be screwed back.
Now you should move the panel with your fingers in order to dismantle it correctly. It should leave the special latches in the body of the device. With all this, beware of smearing the camera, as fingerprints on the camera will in no way decorate future pictures.
It is time to remove this part of the device. The photo clearly illustrates how this can be done very well.
The removed part after dismantling can be thrown away, if, of course, there is no longer a need for it. To put the newest, all of the above actions are performed in reverse order. With all this, we must not forget that iphone back covers are sold in protective film, which must be removed from the inside.
The work was done successfully and the device shone with new colors.
Dare to change back cover iPhone?
Without the help of others replace the phone panel is real, but not everyone can afford to take on this business. To do this, you only need to stock necessary tools and patience. But if you are not willing to take risks, then it is better to contact a service center where engineers have extensive experience and abilities that allow such manipulations to be carried out quickly and without consequences.
Get amazing appearance once and for all the communicator will fail, but he will be able to amuse the owner for a long time and lure the exalted glances of his friends and colleagues.
Ask a question via the website form.
Question from users of VKontakte.
Let's fix it iPhone very fast: Changing the back cover from 10 minutes Changing the battery from 15 minutes Changing the monitor from 40 minutes Repairing buttons from 20 minutes.
We love to do repairs quickly and perfectly!
Guarantee; Diagnostics free of charge; iPhone cleaning from water and pollution (champagne, ketchup, etc.) from 1000 rubles. Price list. Prices for repairs are indicated with the price of spare parts Repair.
Now we will tell you how to disassemble Apple iPhone 4/4S. We will create this using the example of an iPhone of the fourth model with a broken touchscreen (sorry.
Guarantee; Diagnostics free of charge; The price of labor is indicated with the price of spare parts. Type of work Cost Screen (screen and touch glass) for iPhone 5S 3500 Screen (screen and touch glass) for iPhone 5C 3900 Screen (screen.
2010-2013 "We'll fix everything!". Copying and implementation of these materials is strictly prohibited without the personal permission of the creator.
Short Description
How to disassemble iPhone 4/4S, replace the back cover…. How to disassemble iPhone 4/4S You can also replace the back cover of your iPhone 4 or iPhone 4S. iPhone 4 repair: How to replace the back cover yourself. How to replace the back cover on iPhone 5. This guide will show you how to replace the back cover on iPhone 5. How to replace the back cover on iPhone 4 or iPhone 4S. If you manage to damage the back cover of your iPhone 4 or iPhone 4S, it should not be replaced. Replacing the back cover on the iPhone 4 in Moscow: prices. How to replace the back cover (glass) of the iPhone 4. Even the very strong glass of the iPhone 4 sometimes breaks or you want to change the back cover for a better one. iPhone 4s back cover replacement in Moscow: prices. Replacement iPhone glass 4 - itcom. How to change glass yourself replace screen in iPhone 4 iPhone 4 cover on iPhone 4. Order cover on iphone 4.
Top cover washing machine is needed in order to give the product a decorative look, close and protect some components and electrics. In addition, it tightens the frame, making the device rigid, and reduces vibration during its operation. The lid takes on mechanical loads, since quite often something is put on it, using a washing machine in everyday life. That is why, in case of unsuccessful transportation or careless handling, the cover may crack, then it will need to be replaced.
How to remove a part?
If you don't know how to remove the top cover on your washing machine, you could seriously damage the appliance. Many models are quite difficult to disassemble, and the removal of this part causes great difficulties for an inexperienced master. You need to know how and where the fasteners are located, carefully unscrew them and pull the cover up; some models may have special plastic latches that additionally hold the cover in place.
Why is demolition required?
The main problem may be physical damage to the lid itself, in addition, it is usually removed to carry out other repair work, relating to the components located in the body of the washing machine, which can only be removed by dismantling the top cover.
Some washing machines need to be completely disassembled for diagnostics, some can be inspected by removing the cover, but in any case, it will have to be removed.
To replace the part itself or to get to the internal parts of the device, you will need to remove it. To do this, you need to have a Phillips screwdriver, less often a hexagon, a wrench or some other tool. Most often, only two bolts fix the cover, but if, after unscrewing them, you cannot remove it, you need to look for other hidden fasteners; force should not be applied, otherwise you will break the fasteners or the cover. Most often, the bolts are located at the back, so the device will need to be moved away from the wall enough to convenient operation distance.
You need to work with the device turned off from the network. After the bolts are removed, the cover must be carefully moved up and towards the rear of the machine. Please note that each cover has grooves for fixing, you need to pull it out so as not to break them. In order to return the cover to its place, you will need to do the same steps, but in reverse order. Putting it on is usually easier than taking it off.
What to do in case of breakdown?
If replacing the cover usually does not cause problems, and you can deal with it yourself by simply buying a similar part, then diagnosing other malfunctions may not be possible for a person who is poorly versed in the operation of the device. If you change parts at random, you will not only spend a lot of time and effort, but also a significant amount of money, changing those nodes that do not need to be replaced. The most competent solution will be the one who quickly determines the cause of the malfunction and calls approximate cost its elimination. This method is also convenient in that most of the spare parts are in stock, and you do not have to think about where to buy them.
Where to apply?
If you need quality and, please contact us! We offer favorable conditions:
- Convenient and fast home service.
- We solve problems of any complexity.
- Spare parts are always in stock.
- The cost of work is average, so you do not have to overpay.
- Our specialists are highly qualified, do not invent unnecessary problems, competently resemble repairs.
- Our company gives a guarantee not only for the spare parts purchased from us, but also for the work of the master.
The car needs constant attention. Even the smallest breakdown, such as a leaking radiator cap or a malfunction of the valves in it, can disable large components and assemblies, so it is very important to replace it in time. About what function the car radiator cap performs and what threatens its malfunction can be found in this article.
Why you need a radiator cap
The radiator cap performs not only the role of a barrier that prevents splashing of antifreeze from the expansion tank, as many motorists think. In fact, this is a rather complex device consisting of two valves.
The inlet valve allows antifreeze to enter the tank when the temperature of the car engine changes. If the temperature rises or boils, then inlet valve unable to submit enough liquids into the expander. It closes completely, thus isolating expansion tank and cooling system.
With a further increase in pressure, the exhaust valve is already activated, some of the volume of the coolant enters the expansion tank, thereby relieving pressure. If the pressure is not relieved in time, then the cooling system will simply break in one of its weakest points. As a rule, these are the junctions of the nozzles. In addition, overheating of the engine caused by a malfunctioning radiator cap can lead to serious deformation of its constituent elements, such as the cylinder head, and subsequent failure of the entire unit.
How to check the radiator cap
If it is already leaking from under the cover, then there is no point in checking it. However, it is better to prevent such a situation by preventing leakage, and replace the cover in time. This can be done with periodic inspections.
In order to check the health of the radiator cap, it must first be removed and carefully inspected. The main visual signs that it is time to change the cover:
- deep scratches;
- the presence of rust;
- deformation;
- cracks that break the tightness.
In addition, it is necessary to check the stroke of the cover spring. If you can squeeze it without much effort, then the cover must be replaced.
Checking the operation of the valve system is best entrusted to car service specialists. If the opening moment of the valve does not meet the standards, then the radiator cap must be changed.
How to replace the radiator cap
In order to replace the radiator cap, you must first purchase it. Since this element of the engine cooling system is quite important, you should not save money by buying low-quality cheap products from unknown manufacturers. First of all, we can note such firms as TAMA and MASUMA. The lids of these manufacturers are distinguished by good operational characteristics, reliability and at the same time low price. They have to be changed relatively rarely, no more than every 50 thousand kilometers. In order not to forget, you can combine this process with the replacement brake pads, while the frequency will be approximately the same.
Before going to the store, you should know which radiator cap is installed on your car. There may be differences in the method of attachment and dimensions of the different brands cars. You can take the old cap with you to the store as a sample.
| Manufacturer | vendor code | Name |
|---|---|---|
| MASUMA | MOX200 | Radiator cap 1.1KG/CM2 |
| MASUMA | MOX201 | Radiator cap 0.9KG/CM |
| MASUMA | MOX202 | Radiator cap 1.1KG/CM2 |
| MASUMA | MOX203 | Radiator cap 0.9KG/CM |
| MASUMA | MOX204 | Radiator cap 0.9KG/CM2 |
| MASUMA | MOX205 | Radiator cap |
| MASUMA | MOX208 | Radiator cap 1.05KG/CM2 - FUT-R142 |
| MASUMA | MOX210 | Radiator cap (R183) 1.0KG/CM2 |
Replacing the cover is fairly easy. It is easily unscrewed by hand, and a new one is put in its place. The main thing is to do this with a cold engine, otherwise you can get burned. The lid should be screwed in thoroughly, avoiding possible spontaneous unscrewing due to vibration.
If you need to purchase a new high-quality radiator cap, it can be done in any of the IXORA stores, as well as in our online store. On sale are both the already mentioned TAMA and MASUMA lids, as well as products from other manufacturers, but also top quality. Consultants will help you with the choice of the goods which are ideally suited especially to your car.
