If you decide to do Ford Fusion tuning, then two things must be included in it if the engine is gasoline. And if diesel, then one more operation is added to them. What are these things? Find out if you read to the end.
The first thing you need to do...
- As the first layer - vibration isolating.
- The second layer is noise absorbing.
It is advisable to process the entire interior and trunk with these materials. Why do it?
In this case, the crickets will disappear. You will never hear again:
- noise from rubber when you drive on asphalt
- sound from the suspension if you get on a rough section of the road.
In addition, the doors will close more quietly, and not make a ringing hum.
The second thing you need to do is chip tuning
Here are the indicators your car will have after flashing:
- power (before / after) - 80/89 hp
- torque (before / after) - 127/140 Nm
2. Fusion 1.4 TDCI
- power - 68/88 hp
- torque - 160/200 Nm
- power - 100/109 hp
- torque - 150/165 hp
Chip tuning price for gasoline engines about 10,000 rubles, for diesel - 14,000.
But these are all numbers, below we will give the sensations that we received real owners this model after chip tuning.
After flashing, it feels like Ford Fusion was driving with a trailer before, but now it has been unhooked.
If before chip tuning, moving along the track with the air conditioner running, the engine did not have enough strength to overtake even trucks, then with new firmware overtaking is done once or twice (even with the air conditioner running at maximum).
The car accelerates much faster. You feel the pickup already at 1500 rpm, and not 3000, as before. In second gear, you can accelerate to 100 km / h, and the tachometer needle will not reach the red zone.
Fuel consumption has also dropped. The motor responds faster to the pedal.
By the way, at the expense of the reaction to pressing the gas pedal ...
On the Ford Fusion, the pedal is electronic. This suggests that when you press it, the signal goes first to the computer. He processes it, and then gives the command to open the throttle valves.
It takes little time for the ECU to receive information, process it and give a command. But it is enough to feel that acceleration does not begin immediately, as expected.
Those who are annoyed by such a slow reaction of the car to pressing the gas pedal can install JETTER.
And the third thing (it must be done by those who have a diesel Fusion) ...
In our conditions, it breaks down earlier than expected. A new one costs about 500 euros. You can, of course, clean the old one. But this does not always lead to the desired results. Therefore, the only optimal solution is to simply remove it, at the same time the motor will show everything it is capable of.
It is unlikely that you will be able to do this on your own. Because it should not just be removed from exhaust system, but still removed from the ECU program. And this is impossible to do without special equipment and programs. If it is not removed from the computer program, then errors will constantly appear in the operation of the control unit.
It justified its name and combined in itself what could not be achieved either from a crossover, or from a station wagon, or from a compact city car. They even came up with a separate class of cars for him - UAV, Urban Activity Vehicle, that is, a car for an active lifestyle in the city. The Ford Fusion is based on the Fiesta, and this somewhat simplifies its repair, although even after years, the car is kept strong. There are problems, like every older car, but the Fusion bypasses them in its own ways. Still, sometimes you need to help him with this.
Ford Fusion key features, body and engines
The Fiesta base and crossover features have merged into one ammunition load in the Ford Fusion, which keeps the heap quite tightly. Spacious interior And big trunk added fans to the car, who do not particularly pay attention to the harsh plastic interior. The loading height of the cabin is only 53 cm, and the trunk volume is 337 liters, if the backrests are not folded down. Without seats, the boot space increases to 1175 liters, which is a success for a class B car.
We had available only engines of 1400 and 1600 cubic meters, although in Europe they offered two more units - equal-volume economical turbodiesels. They also come across on our roads, but not as often as officially imported cars. In the base car had a standard, simple and reliable 5-speed mechanical transmission. There was an option to use the robot paired with 1.4-liter gasoline and diesel vehicles, but he was not in great demand. The suspension seemed too intrusive to many when it reminded of bumps, but for a loaded car it was not critical. But in the corners the car kept great, not inferior to the nimble Fiesta.
Ford Fusion design flaws
The most common reason for a warranty appeal to the officials for owners of gasoline modifications was the failure of the ignition coil. In Europe, too, not everything started smoothly, because many diesel cars was withdrawn due to problems with fuel system and injection pump. Cars produced in 2003-2004 had frequent problems with an unreasonable failure of the computer, which, however, was immediately changed under warranty.
The transmission has always been on the level, if you follow the maintenance schedule, but on some cars that had to carry heavy loads, ahead of time the clutch burned, and the head gasket could also burn out at high loads. Inductive ABS sensors they do not like dust very much and they need to be cleaned often. Interior upholstery in inexpensive modifications was wiped fairly quickly. For the rest, everything Ford disease Fusion are treated as they occur. We will look at the main reasons for interfering with the tightly packed Urban Fctivity Vehicle Ford Fusion.
Changing the oil in the engine and transmission
Actually, everyone who has driven 30 thousand km on a Ford Fusion is faced with an oil change. Drain the oil on a hot engine before it cools down. To access the filter, it is best to remove the engine compartment protection, if installed, then complete freedom of action opens up. Easy to remove, just unscrew the four screws. When the plug is unscrewed, it is worth looking at the o-ring. You never know.
Under the protective cover, you will not always see oil streaks. Moreover, the ring is not eternal and can withstand four oil changes at the most. And when the protection is installed in place, it is necessary to check that the air conditioner tube does not fray from contact over time.
Ford Fusion Transmission Service
IN manual transmission oil does not change, so it is enough to check its level. The level control plug is hidden behind a plastic cover, which can be removed by unfastening four latches. There is another similar nut, it fixes the stem, so it's better not to confuse them. The latch nut is slightly below the plug. Do not confuse the nuts, because when loosened, the fixing nut will simply loosen the clamps and they will spill out into the gearbox housing. Then you have to remove and disassemble the box. The oil should be at the level of the lower edge of the filler hole, if less, then add only native - WSD-M2C-200-C.
Automatic box requires special attention. The oil in it is also supposed to be for life, but you don’t need to blindly believe in it if you don’t want to carry out expensive repairs. brand branded oil- WSS-M2C-924-A. Usually, vigilant and economic drivers change the oil after 100 thousand runs, but if during the revision it smells of burnt, it is better not to pull it, but to replace it immediately. It will not work to drain all the oil without dismantling, but if about 3 liters pour out, then this is already a success. The same amount needs to be added. Next, we consider some of the nuances that do-it-yourself Ford Fusion repairs along the chassis cause.
A fairly common procedure difficult conditions operation - replacement of SHRUS with Ford Fusion. The procedure takes enough time, but if you do everything wisely, you can do without unnecessary gestures. Installed on the car in different time grenades with a different number of splines, so before you change the CV joint for a Ford Fusion, you need to know this parameter for sure. No special tools are required for this, but only strict adherence to the instructions will lead to a quick and trouble-free replacement. It's simple:
Installation is carried out in the reverse order.
Usually, the replacement of CV joints and wheel bearings is carried out if necessary, and the rear wheel bearing can be replaced in case of souring of the studs when replacing the rear brake pads. This happens if lubrication and care rear axle not enough attention was paid during the passage of routine maintenance.
Generally, ford car Fusion is a great help in big city and does not lose its relevance over time.
Refinement stock cars can be divided into two types: useful tuning and different styling. In the ObvesMag online market it is possible to choose and buy accessories for Ford Fusion 2002-2012, this will make the car even more stylish. It will be very pleasant for any motorists not only to stand out in the stream, but also to install devices that are indispensable in operation. Buy tuning from leading Russian and foreign manufacturers, and every day your soul will admire the unique and unforgettable appearance of this car.
Russia produces a huge variety of accessories for Ford tuning Fusion 2008-2011, and constantly our customers ask themselves the question: what to look for first? The Obvesmag store can recommend that you first consider the things without which the use of your car cannot be very pleasant and easy. In the interior of any car, it is imperative to buy floor mats that will help avoid dampness and retain moisture. In a car, not only is there a chance of rust developing, but there is also a risk of broken wiring, which is even more dangerous.
The next type of major change is the installation of window and hood visors. Such tuning will protect Ford Fusion 2009-2010 from winds and chips. In the ObvesMag store there are deflectors of individual types and sizes in the catalog. For example, deflectors with stainless moldings: such accessories have an excellent appearance.
Tuning Ford Fusion
The main direction of tuning Ford Fusion, which our store offers, is the implementation of a steel body kit and aluminum sills. Car footrests can help you get into the passenger compartment and make the use of cars more comfortable. Without footrests, it will be difficult for children and older people not to stain clothes and shoes; without them, it is inconvenient to clean the roof of snow or install bicycle racks.
Practical body kit of stainless steel will help protect bumpers and car doors from collisions with neighbors in traffic jams and other damage. Many small collisions will go unnoticed with a powerful assembly and thick steel. Such tuning for Ford Fusion is vital when moving around bad roads or in the conditions of cramped modern big city With big amount cars.
The ObvesMag store boasts a huge number of different accessories for tuning the interior and appearance of cars. Various covers for mirrors, spare wheel boxes and spoilers. Any such accessory will make the look modern car more stylish and attractive. You can install our tuning yourself or in our service center on the day of purchase. We will deliver the goods for tuning in Moscow by courier or to any point in the Russian Federation by logistics companies: this is fast and reliable.
What driver does not dream of a comfortable, fast and reliable car? domestic brands machines in recent years are not very attractive to the consumer. And here are the cars imported production- that's another matter! The best option, which combines price and quality, is the Ford Fusion. Attractive appearance and good build for a long time will please the driver. And although there are many such cars on the roads of Russia, Ford Fusion tuning will help to stand out from the crowd and give individuality.
For Russian roads "Ford Fusion" - just for the future!
Really, Russian autobahns leave much to be desired. Not all foreign cars capable of withstanding such tests. "Ford Fusion" is a combination of SUV and hatchback, which will suit a variety of categories of the population for various purposes, whether it is a family trip or a solo trip.
The car easily copes with the vast expanses of nature thanks to a powerful bumper and moldings. And given the right choice of mud tires on it, you can safely go on any expedition. Ford Fusion also feels great on smooth city roads. Ford Fusion tuning will help improve the car and make it truly universal.
Prices for such pleasure are pleasantly pleasing. Average basic equipment cars can be bought for 510 thousand rubles.
Individuality in the details
It is not surprising that all roads in Russia are literally "teeming" with cars of this brand. Successful combination prices and quality and attracts consumers. Drivers who are used to standing out should think about a little refinement when buying a car. Eg, external tuning"Ford Fusion" will help emphasize the features of the brand.
Such tuning includes:
- Styling (tuning with special films: vinyl, armored film).
- Tuning with LEDs.
- Replacing or modifying the bumper,
- Installing door sills.
Tuning "Ford Fusion"
If we talk about finalizing the car as a whole, due attention should be paid to the interior. Especially when the driver is behind the wheel for a long time.
So, first of all, you need to take care of the seats and pick up special massage covers. They will embellish the interior and support the back in good shape. For the winter, you can purchase heated covers that will keep not only warm, but also healthy. But in summer time bamboo capes will be appropriate, allowing the skin to breathe.
It is also important to purchase climate control for the cabin. Such a system is indispensable at any time of the year. She is able to recreate several temperature conditions which is perfect for families with children. By installing climate control, you can forget about drafts, and with them about diseases.
Drivers who prefer to ride on mud tires should consider soundproofing the cabin.
By the way, about rubber. It’s better to buy two sets: road and mud. The first is designed for quiet city driving, and the second is for off-road travel, and it also copes well with snow in winter. In addition, two sets of rubber will wear out less.
Fans of speed can tune engines. Chip tuning is effective in this area - a complete flashing electric block engine control. For this you need special equipment, and such refinement is carried out only in salons.
On your own or in a salon?
Nowadays, tuning salons are found at almost every step. There, for reasonable money, they will do impossible things, even with the most simple car! Tuning "Ford Fusion", the photo of which is presented in the catalogs, will delight every driver.
But on the other hand, most of the improvements can be done at home. This will require special tool, material and free time. Tuning at home is less expensive. In addition, as the saying goes: “If you want to do something well, do it yourself!” And most importantly, do-it-yourself Ford Fusion tuning is great way express yourself.
Tuning Ford Fusion do it yourself quite a daunting task. At some point, every car driver concludes that his Fusion needs tuning. To do this, you have to search for the right parts, components and accessories. The market provides the buyer with a wide variety of conceivable and unimaginable new products, among which any beginner in tuning is lost, it is difficult for him to choose from this variety necessary thing, which can successfully upgrade his car.
So that you do not have to find yourself in a similar situation, you need to familiarize yourself with a few of the most necessary accessories for tuning Ford Fusion.
For decorative decoration of the interior, overlays that imitate wood are very popular. They ennoble the interior of the cabin, add solidity, which is typical for cars more high level. To install decorative overlays, you must first degrease the surface on which the overlay will be installed, and then warm this surface with a hairdryer.
In order to avoid damage to the engine, and other units that are in engine compartment Ford Fusion, steel protection offered. It is equipped with stiffeners, has special mounting brackets for this car model and is painted black.
Tuning Ford Fusion is easy to do also because in car showrooms, available a large number of various decorative overlays. Among them, linings for door curtains, decorative linings for mirrors, for the gas tank hatch, for moldings, for door handles, a decorative strip for the trunk lid above the number are in high demand. All of these accessories are easy to install.
Often during the operation of the car, damage occurs on its internal thresholds. Boarding and disembarking of passengers is also reflected in the appearance of the thresholds, scratches appear on them, sometimes paint chips are possible. Repair of the above-described minor, but very unpleasant damage, is quite expensive, because in order to remove small chip Paints on the surface have to be repainted later on the entire surface, and this is costly. It is much cheaper to protect the thresholds from these damages with the help of overlays. They are attached to the inner surface of the threshold using double-sided tape, which is included with the lining. On the front pads there is an inscription of the model of the car.
A thing that is constantly used by any motorist is the ignition keys. Intensive work spoils their appearance very much. And modern smart keys are especially affected, as they can fail from getting scratched or dropped, which will necessarily entail costly repairs or replacements. To avoid such an unpleasant incident for a motorist, you should use key cases made of high-quality genuine leather. Each such case is individually made for a specific key, taking into account the geometric shape and size, the placement of control buttons for signaling, opening and closing doors.
Thus. tuning Ford Fusion do it yourself can be completely done without resorting to the services of car services.
