How to make a loop to open the car. How to open a car without a key or dead battery

Just recently I returned from a vacation where I spent almost three weeks. All this time my car was sitting quietly in the garage. A few days later I had to go to work. It's good that I decided in advance to prepare the car.

By using:

Even before pressing the button on the key fob, I noticed that the alarm light was not blinking. I thought it burned out, although this should not have happened, because I have a new alarm. Having made repeated and unsuccessful attempts to get into the interior of the car, I realized that the reason was in the battery, which simply sat down. And he sat down so that his charge is not enough even for an alarm. How to open a car without a key, I just had no idea.

The idea immediately arose to call a lock-opening service, however, when they told me the cost of services by phone, I immediately discarded this idea. I had to sit down at the computer and spend several hours searching for information. As a result, I have identified several effective methods, with which you can open the car door:

• use a special pneumatic cushion;
• connect to the generator;
• use the line.

I personally tested each of the methods on my car and now I offer you.

pad

The cost of this device is tens of times less cost services of bear cubs. In the store, such a pillow costs only a few hundred rubles. With its help, you can wring out the door or hood, in case the battery is completely dead.

What exactly did I do:

1. He slipped the pad into the gap between the body and the hood.
2. With the help of a pear, he pumped it with air.
3. I inserted a long and thick wire into the resulting gap, to which I applied a “plus” from a spare working battery. "Minus" I fixed on the rim.
4. He reached out with a wire to the positive battery system and pressed the button on the key fob.

Voila! The door opened as if by magic. No scratches, chips or bent metal. Everything is neat and fast.

Generator

I also tried this method, although compared to the pillow, it is quite laborious and not very convenient. But if suddenly you have absolutely no other devices at hand, then this method will help you get into the interior of your car.


If the battery is dead, you can open the car using a generator. In this case, you will need another working battery. I will describe the whole process in order:

1. The first thing to do is to remove the engine protection.
2. Having reached the generator, we find a “positive” bolt on it.
3. We connect two wires with a cross section of 2 sq. mm with "crocodiles".
4. We connect the “positive” cable to the “positive” terminal of the generator, which is connected to the battery.
5. Connect the negative cable to the body.

As a result, the alarm is activated and you can open the car with the key. Using this method, the most important thing is not to mix up the contacts on the generator. Otherwise, instead of open door you may get a short circuit.

Ruler

You can open the car with a ruler. If you don’t have absolutely any improvised means with you except for a metal ruler, then you don’t have to worry. With its help, you can quite easily open the car door. To do this, follow these steps:

1. Raise the side seal in the area of ​​the door lock
2. Insert a ruler into the gap formed between the glass and the door.
3. Press it on the rod that is responsible for raising the flag

This method is suitable for cars domestic production and for many foreign cars. Majority modern machines equipped with a complex and reliable door mechanism, in front of which a simple metal ruler can be powerless.

There are some other ways to help open a locked car. If the glass in the car turned out to be lowered, you can use the wire. Make a loop at the end with which you can hook inner handle and open the door.

If you need to pull the handle to the side to open the doors in your car, then use a piece of wood. In this case, you will have to press on the handle. By the way, if you don’t have wire at hand, you can use the wiper blade. The only thing you need is to remove the knitting needle from it.

Well, there is another way. However, I advise you to use them only as a last resort. If you have absolutely no improvised means at hand, and you yourself are hundreds of kilometers from civilization, then just break the glass. Pleasure is not cheap, but effective.

As you can see, there is nothing complicated. It is enough just not to panic, but to gather your thoughts and apply one of the methods. I advise you to carefully remember at least some of the above methods. Who knows what situation you might find yourself in. Be sure to watch the video on how to open the car without a key. So you will be ready for any surprises.

Find the right tool. If one of the windows is a little ajar, then consider yourself lucky - you can get into the car pretty quickly. In the case of a lock with mechanical drive A straightened wire hanger (or any similar rod) with a small loop at the end will work well. In order to disassemble the hanger, straighten it and form a loop at the end, you may need pliers with long thin jaws.

• The loop at the end of the wire should be large enough to wrap around the drive head and small enough to hook it. The loop can be formed from the wire itself, or a piece of more flexible cord can be wound to its end.
• In order to disassemble and straighten the hanger, you may need pliers with long, thin jaws.

1. Insert wire. Insert a wire with a loop at the end into the gap between the glass and the body and bring it to the head of the lock drive.

   Grab your head. Put the loop on the drive head (like a lasso) and pull it up to open it. It may take several tries. But one successful capture - and voila, you opened the locked car!

   Open the unlocked door and take out the keys.

If the trunk is open

Find the emergency cord. If your trunk is not locked, then open it. Look inside the tail of the cord emergency opening. Most often it can be found on the fifth door or on the trunk lid or on the roof luggage compartment from within.

Pull on the cord. When you find the emergency release cord, pull on its tail. Then the backs of the rear passenger seats are unlocked; after that they can be folded inside.

", I will try to help those who have become a victim of a situation where the car doors are locked, and the key is left in the ignition or just inside the car. If you have not yet encountered such a problem, I advise you to read this article so that in the event of this trouble, you know how to act in this situation.

The article will help save time, money, as well as your own nerve cells.

I want to note right away that the purpose of this article is to help those who are in an unpleasant situation and cannot get into MY car. In no way am I calling for any illegal actions and I am not an experienced burglar, and this article is not positioned as a manual for car burglars. All I want is to help "drowning" people who got into an unpleasant situation related to the automatic locking of car doors.

I'll start, perhaps, with the fact that this article is rather a cry from the heart than the usual guide for beginners. Why? Yes, because the other day I, the author of this article, myself found myself in such an unpleasant situation when the key was left in the ignition and the doors slammed shut. To be honest, I personally, like most of those with whom this happens, did not believe until the very end that such a fate could befall me. I thought that this could happen to anyone, but not to me, for which I actually paid the price ...

I have not been able to figure out why this is happening. Why car manufacturers came up with such an option is not clear to me personally. Perhaps you will have some ideas about this, in which case feel free to comment.

Here is how it was. I got out of the car for literally a minute, get some fresh air while I waited for my wife. The key was in the ignition, the engine was off, the radio worked and burned. Leaving the car, I did not block anything and did not press any special buttons, but what was my surprise when my wife, pulling the passenger door handle, said that the door was locked. Not believing her, I pulled the handle driver's door and with horror stated the fact that the car slammed shut ... Why this happened, I still don’t understand, maybe it’s some kind of protective function or just a “glitch” of the central lock (central lock), but the fact remains, I get into the car I can't, the key is inside and I don't have a spare. Autumn, night, first frosts, mobile connection practically does not work... Arrived! What to do? The first thought was to break the glass, but, of course, I didn’t do it right away, because I once read an article about how you can open the door without a key if the car is blocked. Rummaging through my memories, I remembered several ways, which I will now introduce you to.

First what needs to be done is to remember an additional set of keys from your car. Even if they are 10, 20, or even 50 km away, it is cheaper to go after them than to break a window. If you do not have those, then I sincerely sympathize with you, read on, perhaps other ways will help you.

Second way - find the number of a company that specializes in such emergency door openings. How to do it? If you have a smartphone or laptop, try to "find" the Internet. We are looking for " emergency opening of car doors", "car door slammed key in the lock", "car door locked"etc. The search will give you a list of sites that can help you. If you don't have the Internet or you don't know how to use a computer, then the next way out is to call a friend or girlfriend and act through them, let them find a number or people, who can perform an emergency opening car door. A specialist will open the door in a matter of minutes, and will take no more for the work than you would have to pay for glass and installing a new one. In addition, this method better themes that all windows will remain intact, and when selling a car, this is an important plus. When buying a car, buyers check the date of manufacture of glasses and, if they find a discrepancy, they are unlikely to believe that it was an unpleasant situation in which all the doors in the car slammed shut and you yourself had to break the glass. Most likely, the potential buyer will decide that the glass was changed after the accident, and the car after the accident, as you understand, is not the best option, therefore, most likely, you will sell the car for a long time ...

Method three - bend the edge of the driver's door and press the ESP button (power window regulator) with something long. The method is good, provided that the ESP works for you in all positions of the ignition key. me, in this case, no luck, the focus didn't work, the key was in the wrong position, and even reaching the button, we couldn't lower the glass. The principle here is this: we install something like a wedge between the door and the body, which makes it possible to bend the door, put something metal or whatever is at hand into the gap formed and press the button to lower the glass. When the glass goes down you can open the door. As a blade, you can use a kitchen spatula or, for example, very a good option- tonometer cuff. It is necessary to insert a pillow from the device for measuring blood pressure into the gap, after which, using a “pear”, we pump air, which will increase the volume of the cuff and the gap between the door and the body will become large enough to perform the above operations.

Fourth way - rope and knot. This method very effective when the door lock button is located on door card near the glass itself, for example, since on , . In order to open the car doors using this method, you will need a piece of rope or, in extreme cases, a shoelace. The principle is as follows, you need to make a loop, which, if necessary, can be tightened. We carefully wind the cord with the loop from the end of the door inside the passenger compartment, then place the loop opposite the door lock button, put the loop on the button and tighten the loop. Next, place the ends over the button and pull up, this will allow you to raise the button and unlock the draw.

Method five - wire with a hook. Fold up on the driver's door rubber compressor and insert a wire with a hook at the end into the gap formed. With this hook, you need to hook the rod of the lock opening mechanism and pull it up. As a rule, after this manipulation, the door opens. Structurally, this thrust is located in different ways, so it is rather difficult to give any specific advice, it is necessary to act according to the situation.

Sixth way . This method, in principle, repeats the previous one, just in this case we will not act on the traction, but on the trunk opening button. We act in the same way, bend the hook out of the wire, bend the edge of the driver's door and try to reach the trunk opening button. After the trunk opens, recline the seat, make our way inside the cabin and open the doors.

Method seven - we break the lock. This method should be used only as a last resort, when other methods cannot achieve the desired result. It consists in using brute force to act on the door lock cylinder, after which you will have to repair the lock, and also, most likely, replace all door and trunk cylinders. By the way, most likely, after that you will have two keys - one for the doors, the second for. If this does not bother you, you can use this method, however, due to the high cost, I would recommend considering it only in case of emergency.

Eighth way - radical. If all of the above did not help, you still have to break the glass. Before you knock out the glass, you need to think carefully. It seems to be a trifling matter, but if you hurry, you can do such “businesses” that repairs will cost many times more and there will be twice as many problems. First you need to find out what kind of glass you need to beat, for this, either yourself or through friends, find out the cost of all glasses separately, find out if they are available, as well as the cost of installing it. Weigh all the pros and cons, after which you can start beating. If you have adhesive tape on hand, then before hitting it, it is better to paste over the glass with adhesive tape, this will hold the fragments and prevent them from scattering throughout the cabin. Do not paste over only the area you are going to hit.

You need to beat carefully, do not try to be a hero and try to break the glass with your bare hand or foot. Firstly, this is glass, no matter how you twist it, you can cut yourself, and secondly, it does not break as easily as they show in the movies. For example, I broke the glass in my car from the fifth time using a metal mount. If you have a drill on hand, it would be nice to try to drill through the glass, this would allow you to avoid a million fragments and at least get home without problems and drafts. If there is no drill, hit with whatever you have to, a stone, a log, try to break the glass so that it does not fall out completely, but only makes it possible to stick your hand in and open the door. Glass should be broken with gloves, this will save you from unnecessary problems and unnecessary blood ... After you solve the problem, the hole must be sealed with adhesive tape or cellophane, in short, by any means, you need to close the hole.

How to avoid such situations?

Now I will give some useful tips how to make sure that you never encounter a similar situation, or at least get out of it with minimal losses.

1. Try never to leave the key in the car. When you get out of the car, take the key out of the lock.
2. Make a duplicate key. If you have a duplicate, you can always return home, take your second key and use it to open a locked car. If you don’t want to make a full-fledged key with a chip, make a regular master key (a key without a chip), it will be cheaper and in the event of this trouble, you can easily open your locked car. Although I would recommend that you still spare no money and make a full-fledged key with a chip. If you lose your only key, it will cost you a huge penny to have a new one made by the dealer without the original key.
3. Find out the number of the company that provides services for emergency opening cars before it happens to you.
4. Do not use the automatic door lock option.
5. Do not close at least one of the doors when you get out of the car, and the key is in the lock, let them be closed, but not closed. If the doors are blocked, you can get into the car.
6. If you leave the car for a long time, take the keys with you.
7. When warming up the car, leave one door open or at least open the glass. Alternatively, you can take a keychain with you. remote control and leave the key in the lock. If the door is blocked, you can open it with the key fob.

I have everything, I hope this article will help someone solve big problem. If you know other ways to open the car when the doors are slammed and the key is in the lock, feel free to share them using the comment form ..

There are many situations in which it is impossible to use the key to open the car. For example, it can be lost, forgotten somewhere, left inside the cabin, etc. However, you should not panic in this situation - you can open the car without using the key.

Method number 1

The glass has a rubber seal. It must be carefully pry from the side where the lock is located on the door. This can be done with a screwdriver or even a nail file. Next, the seal is pulled out.

Then you should take the wire and roll it into a hook. The hook is wound into the opening, which turned out between the glass and the door. When it hits the lock, you need to feel for the opening mechanism. Move the hook to the left. When it "fails", wind the hook to the right. Next, you will find the mechanism. You need to cling to his traction and open the lock.

Method number 2

It is necessary to bend the top corner of the door. To do this, a wooden wedge must be carefully hammered between it and the rack. To help yourself, you can also use a screwdriver or a small pry bar. In this case, a piece of cloth should be placed under the instrument. Otherwise, you may scratch paintwork auto.

After a gap is formed, use a wire hook. Hook on the lever with which the door opens from the inside of the cabin. You need to pull it - then the door will open.

Method number 3

This is a rather radical method. You need to take a hammer or mount and smash side glass. Then you need to remove the remaining glass. Just in case, wrap your hand in a rag. Slip it into the cabin and open the lock.

Method number 4

If you do not want to waste time and spoil the car, it is better to order a professional opening of the lock. Specialized services perform this procedure in a few minutes. In this case, no part of the machine is damaged. All you need is to have documents confirming that you are the owner of the car.