What is better to put rubber bands on the wiper blades. What are the best rubber bands for windshield wiper blades? Replacing the rubber bands in the wiper blades

As a rule, domestic drivers begin to appreciate the work of janitors in bad weather. Especially at such a time, car owners appreciate the quality of the brushes, because the safety of the driver depends on it. You can learn more about how a windshield wiper tape is selected and how to replace it on a car from this material.

[ Hide ]

Rules for choosing rubber bands for wiper blades

If you are faced with a need, then first of all you need to understand what should be considered when choosing. When buying rubber bands for brushes, first of all, you need to pay attention to their quality. If the product is of high quality, then it should have an even color over the entire surface, and bends or distortions of the structure are not allowed. Also, make sure that the wiper blades are free of torn parts, damage, cracks, or burrs on the wiper side.

A quality windshield wiper belt should be soft and flexible so that it can withstand low temperatures, while cleaning the glass efficiently and without scratching. In addition, if the rubber band is installed on the frame wiper, it should move without problems when bent. Of course, when buying, you can pay attention to the selection of the size - the dimensions of the elastic bands can be different, but usually they are available in sizes of 500 and 650 mm. Buying a longer elastic band by 650 mm with a shorter wiper length, you can cut it without problems, and many of our compatriots do this.

If you prefer cheaper options, you should understand that their not very high quality can be noticed immediately after installation. Cheap cleaners can squeak in the first days after installation, and after some time they will begin to smear dirt on the glass, contributing to the appearance of streaks. If you give preference to more expensive options, then their blade will fit better on the glass surface, respectively, the quality of cleaning will also be higher.

In addition to traditional rubber blades, many other options can be found on sale today:

1. Graphite. These items are available in black only.
2. Silicone blades. Usually painted white, but in principle, it can be anything.
3. Teflon coated blades. Such elements are characterized by yellow stripes.
4. Rubber graphite blades.

Rating of the best rubber bands

In order for the replacement rubber bands on the wipers to work for a long time, you need to buy only high-quality products.

Below are some popular product models:

1. Heynell. Such products are characterized by quiet operation, usually even after long months of operation they work without noise and extraneous sounds. According to the manufacturer, this effect is achieved as a result of the correct calculation of the edge angle. But for winter, this option is not particularly suitable.
2. Denso NDDS. Despite the high quality of windshield cleaning, as well as a relatively long service life, these products cannot be classified as durable. Usually the first troubles in their work appear after the first winter.
3. Sparco. Quite a practical option - the products of this brand have shown themselves to be durable and of high quality. Even during cold weather they work fine. Due to the tight fit to the glass, the maximum cleaning effect is achieved.
4. Alca. This German-made version is considered one of the cheapest, usually available in 600 mm sizes. Of course, a low price cannot be due to high quality, however, in this case, the ratio of quality and cost is the most optimal.
5. Sheron. Czech-made products, produced in the size of 650 mm. The high cost is due to the good quality.
6. Voin. Such products are available in sizes 500, 600 and 700 mm. Their cost is also affordable, they are characterized by a normal ratio of price and quality. But if your budget allows, then it is better to give preference to a more expensive option.

Instructions for replacing rubber bands

How to replace wiper blades:

1. Raise the wiper arms.
2. Remove worn rubberized blades. To do this, first find a place to fix them to the guides, then disconnect them with pliers. Be careful with the clips not to damage them.
3. Each of the rubber bands must be disconnected along with the so-called rib on which it is installed. The rib can be included with the product.
4. As mentioned above, the new product must match the old one in size, so if necessary, it can be cut.
5. Install the product on the wiper instead of the old one, then fix it. Rinse the mechanism after installation.

Things to consider in order to extend the life of the brushes:

1. Keep in mind that running the wipers "dry" will significantly reduce the life of the wipers. Therefore, before you start the windshield wipers, the glass should always be moistened at home.
2. Periodically, the gum can be treated with lubricant or water.
3. During the period of cold weather, leaving the car on the street, you need to take the brushes away from the windshield, since at low negative temperatures it is likely that the rubber will simply freeze. And if you decide to turn on a frozen wiper, this will either wear out the washer motor or the brush itself.
4. Before winter, anti-freeze is poured into the washer tank.
5. The glass should be wiped with a cloth from time to time to prevent the brushes from working on a dirty surface, which may contain small particles that will damage it.
6. Make sure that there is no corrosion and dirt on the wiper joints, because of this they wear out faster. Also, the hinges should be lubricated from time to time.
7. If there is a layer of ice on the windshield, do not turn on the wipers.

Video "The nuances of replacing rubber bands in the Mercedes Vito wipers"

How the rubber bands of the wipers are replaced in a Mercered Vito car and what nuances should be taken into account in this case - detailed instructions are presented below (the author of the video is Roman Romanov).

To the category of goods that few people pay due attention to until they cease to function normally. Poor cleaning of the glass surface while driving, when it is snowing or raining, not only affects the aesthetic comfort, but also directly affects the safety criteria for the driver, passengers and other road users. Unsatisfactory cleaning of glass by wipers under adverse weather conditions directly affects the visibility of the road by the driver, the timeliness of detecting obstacles, and affects the ability to quickly maneuver to prevent an emergency. A decrease in the quality indicators of the functionality of the wipers requires the driver to urgently replace the wipers or brushes with them, which is accompanied by a dilemma, which rubber bands for wipers are better to buy from the rich on the market.

General provisions

Wiper blades, along with oils, filters and other elements, are consumable materials and have a limited operating period. The service life of elastic bands, depending on their quality criteria and the material from which they are made, can vary from six months to two years. Accordingly, the better the consumable is purchased, the longer the consumer will be able to forget about the need to replace them again. This fact makes us very attentive to the choice of rubber bands for wipers, to take into account the quality indicators of the goods when buying.

Also important are the design features of the wipers that the vehicle is equipped with. By design, wipers can be frame, hybrid and frameless type. Modern cars are mainly equipped with frameless modifications of wipers, which necessitates the selection of consumable items exclusively from the catalog and for a specific vehicle model.

The choice of gum for frame or hybrid wipers is less problematic, however, it requires taking into account some parameters that will directly affect the efficiency of the wipers. It should be noted that frame-type brushes have proven themselves better in terms of mechanical cleaning of the glass surface, however, they have a number of disadvantages in the form of noise during operation, a high probability of breakage and a strong dependence on weather conditions. Hybrid models of wipers combine the strengths of frameless and frame products, are characterized by all-season applicability, the ability to adapt to any glass relief and a long service life, however, they are characterized by a high price, which often causes the choice of the car owner not in their favor. Consider the main criteria that are important to consider when choosing a brush for a janitor.

Wiper blade size selection

Size is one of the main criteria when choosing a wiper blade. On the market you can see the hugest, which differ not only in the manufacturer and type, but also in the length of the products. When asked what length it is better to buy brushes, the answer of professionals and automakers is unequivocal: this parameter should correspond as much as possible to the standard sizes of the gum installed on the car from the factory.

The fact is that having bought even rubber bands of the wrong length, which are good for wiper blades, the buyer will be very disappointed in the process of their operation. Too long brushes will cling to each other during operation, while buying short rubber bands will affect the surface area being cleaned, which the devices will not be able to capture in sufficient volume, which will be reflected in a decrease in safety. To avoid problems of this kind after installing new consumables, it is necessary to measure the length of the windshield wipers installed on the car before purchase.

Selection of the wiper gum according to the composition of the material of manufacture

The shape of the product, its dimensions and mounting structure are important selection parameters, however, the primary task of the wipers is the high-quality removal of dirt, moisture and other elements from the glass that complicate the visibility of the road to the driver, is performed directly with an elastic band. The cleaning efficiency directly depends on what material the gum is made of.

Previously, without exception, all rubber bands for windshield wipers were made from ordinary rubber, however, a large number of disadvantages of such elements, in the form of squeaks, freezing in frost, mechanical damage during temperature changes, led to the need to find more effective materials for wipers. In order for the windshield surface cleaning to be of high quality, the material of rubber bands for wipers must have the following parameters: wear resistance, elasticity, constant performance during temperature changes and immunity to automotive chemicals with an aggressive composition.

The search for a unique material for the rubber band of wipers continues today, however, there are certain achievements in this industry. Today, there are several types of wipers according to the material of manufacture:

• products with graphite coating;
• rubber bands with the addition of graphite;
• silicone gum;
• gum with yellow stripes with the presence of teflon.

With such a variety of options, many car owners have an adequate question: how to choose a rubber band for a wiper according to the material of manufacture so that it can cope with the tasks as efficiently as possible? Today, silicone rubber bands are the best purchase option, they are advised to be chosen by professionals and consumers, due to their excellent wear resistance, quality criteria and operational suitability at any time of the year.

Positive and negative operational features of silicone rubber

The addition of silicone to the component composition of wiper rubber is today the best technological solution to the problem of the quality and efficiency of wipers. Silicone is a material that guarantees uninterrupted movement of wipers on the glass surface under any climatic conditions.

Among the advantages of silicone rubber, consumers distinguish the following priority qualities:

• extended service life, which exceeds by fifty percent the operational period of conventional rubber bands;
• frost resistance;
• excellent sliding on glass in all weather conditions;
• the absence of a creak during operation in any operating mode;
• the softness of the material eliminates the possibility of chips and scratches on the glass;
• high-quality glass cleaning, characterized by the absence of streaks and stripes, which guarantees an excellent overview for the driver.

As for the shortcomings, they were not revealed during the operation, subject to the timely replacement of brushes and the purchase of original products, and not a cheap fake.

Overview of manufacturers: which brand to prefer

At the present time, there are several dozen companies engaged in the manufacture of automotive accessories, including windshield wipers, as well as consumables for them. The market provides the buyer with both high-quality goods and obvious fakes with frankly disgusting technical characteristics. In order for the purchased device to meet expectations in terms of reliability, quality of operation and operational criteria, it is worth refraining from buying products of “incomprehensible” origin, giving preference to products from well-known manufacturers.

What to choose?

After analyzing the main technological and design features of wipers and rubber bands, we can conclude that the best option for purchase today are hybrid models that combine excellent performance and quality characteristics. If there is no opportunity to buy hybrid windshield wipers, or this purchase is expensive for the consumer, then frameless wipers with a silicone rubber band can be preferred.

When buying wipers, you should also not ignore such an aspect as the brand. Despite the ambivalent attitude of consumers to the choice of products by manufacturer - some buyers believe that it makes no sense to overpay for a brand, this factor can significantly affect the efficiency of windshield wipers. When purchasing products from an unknown manufacturer, the consumer cannot be one hundred percent sure of their authenticity and compliance with technical specifications, which often entails, after a short period, the need to purchase a new set of wipers. In this case, the saying would be appropriate: "The miser pays twice." It is better to buy high-quality wipers once and be sure of their functionality throughout the declared operational period than to buy low-quality products at regular intervals, which will end up costing much more.

Summing up

Choosing high-quality brushes for wipers from a huge assortment on the modern market is a rather difficult task, however, having understood the nuances, it will be much easier to do. When selecting windshield wipers, be sure to take into account the overall parameters of the original products and their design features, pay special attention to the material from which the cleaning rubber is made.

During the operation of the wipers, do not forget to take care of them regularly, systematically cleaning the working surface of debris; in severe frosts, experts recommend removing the brushes or putting them aside when the machine is idle to avoid premature wear of the rubber bands. High-quality and reliable windshield wipers are one of the main criteria for safety on the road.

Rubber bands for wiper blades, as a rule, work in difficult weather conditions - rain, snow, icing of the glass surface. Accordingly, they withstand a significant mechanical load and, without proper care, will quickly fail. For the driver, not only the duration is important, but also the quality of their work. After all, they provide not only comfort, but also driving safety in adverse weather conditions. The following is information on how to choose rubber bands for brushes for the season, the issue of installation, operation, and care for them. At the end of the material, a rating of popular brands used by motorists in our country is presented. It was compiled based on real reviews found on the Internet.

Most rubber bands today are made from a soft rubber-based rubber compound. However, in addition to such products, the following types are also on sale today:

• graphite-coated blade;
• silicone (there are variations not only in white, but also in other shades);
• with teflon coating (on their surface you can see yellow stripes);
• from a rubber-graphite mixture.

Please note that the working edge of the gum does not creak during operation, its surface coated with graphite. Therefore, we recommend that you buy just such products. In addition, these rubber bands are resistant to temperature extremes and UV radiation, so they will surely serve you for a long time.

wiper rubber profiles

Summer and winter types of elastic bands

What rubber bands are better and how to choose them

It must be understood that the best rubber bands for wiper blades do not exist. They are all different, differ in profile design, rubber composition, degree of wear resistance, work efficiency, price and so on. Therefore, for any driver, the best gum for wiper blades is the one that optimal fit for him in all of the above and some other parameters. Let's consider them in more detail.

First of all they divided by season. There are summer, all-weather and winter gum. Their main difference lies in the elasticity of the rubber from which they are made. Summer ones, as a rule, are thinner and less elastic, while winter ones, on the contrary, are more massive and softer. All-season options are something in between.

Various rubber profiles

When choosing a particular brush, the following parameters must be considered:

1. Band size or length. There are three main sizes - 500...510 mm, 600...610 mm, 700...710 mm. It is worth buying an elastic band for the wiper blades of the length that matches the frame of the brush. In extreme cases, you can buy it longer, and cut off the excess part.
2. Top and bottom edge width. It is immediately worth noting that most modern elastic bands have the same width of the lower and upper edges. However, there are options where these values ​​differ in one direction or another. You need to choose a product recommended by the manufacturer of your car. As a last resort, if everything suited you in the previous brush, you can install a similar new one.
3. Blade profile. There are elastic bands with single-profile and multi-profile blades. The first option has the common name "Bosch" (you can also find its English name Single Edge). Single-profile rubber bands are best for use in winter. As for multi-profile rubber bands, in Russian they are called “Christmas trees”, in English - Multi Edge. Accordingly, they are more suitable for the warm season.
4. The presence of metal guides. There are two main options for rubber bands for the windshield wiper - with and without metal guides. The first option is suitable for frame and hybrid brushes. Their advantage lies in the ability to replace not only the rubber bands directly, but also metal inserts. This allows you to increase the elasticity of the obsolete frame element. As for rubber bands without metal guides, they are designed for installation on frameless wipers. In this case, guides are not needed, since such wipers are equipped with their own pressure plates.

How are they installed

Gum replacement

Let us consider in more detail the issue of replacing the rubber bands on the wiper blades. This procedure is simple, but requires additional tools and basic installation skills. In particular, from the tools you will need a knife with a sharp blade and a sharp tip, as well as a new gum directly. For most brands of brushes and rubber bands, the replacement procedure will be similar, and is performed according to the following algorithm:

1. It is advisable to remove the brushes directly from the wiper arm. This will greatly simplify the future operation.
2. Take the brush from the side of the latch with one hand, and gently pry the elastic with a knife in the other hand, then pull it out of the seat, overcoming the force of the clamps.
3. Insert a new rubber band through the grooves into the brush, and fasten it with a retainer on one side.
4. If the elastic band turned out to be too long, and its end sticks out on the opposite side, then with a knife it is necessary to cut off the excess part.
5. Fix the elastic in the brush body with fasteners.
6. Put the brush back in place.

Do not change the elastic on the same base more than twice! The fact is that during the operation of the wipers, not only it wears out, but also the metal frame. Therefore, it is recommended to buy the whole set.

In order to encounter the replacement procedure less often, it is necessary to follow simple procedures to increase their resource, and, accordingly, the service life.

How to extend the life of rubber bands

The rubber bands and the wipers themselves naturally wear out over time and completely or partially fail. At best, they simply begin to clean the glass surface worse, and at worst, they don’t do it at all. The car owner, on his own, can extend their service life, as well as partially restore them if necessary.

The reasons for the partial failure of the brushes can be several reasons:

BOSCH brushes

• Movement on the glass surface "dry". That is, without the use of a wetting fluid (water or winter cleaning solution, "anti-freeze"). At the same time, the friction of the rubber increases significantly, and it gradually not only becomes thinner, but also “dubes”.
• Working on heavily soiled and/or damaged glass. If its surface has sharp chips or a large sticking of foreign objects, then even with the use of a wetting agent, the gum experiences excessive mechanical stress. As a result, it wears out faster and fails.
• Long downtime without work especially in air with low relative humidity. In this case, the rubber dries, loses elasticity and its performance properties.

To prolong the life of the brush, and in particular the gum, it is necessary to avoid the occurrence of the above situations. Also, do not forget about the banal fact of the low quality of both brushes and rubber bands themselves. This is especially true of cheap domestic and Chinese products. There are a few more tips regarding the use of these consumables.

Do not buy frankly cheap wiper blades and rubber bands. Firstly, they do a poor job and can damage the glass surface, and secondly, their lifespan is much shorter, and you can hardly save money.

Proper use and care

First, let's dwell on the issue of proper operation of wiper blades. Manufacturers, and many experienced motorists, recommend following a few simple rules in this regard. In particular:

Snow removal from glass

• Never attempt to clear frozen ice from the glass surface with a windshield wiper.. Firstly, in most cases you will not achieve the desired result, and secondly, in doing so, you will subject the brushes to significant wear. To solve this problem, there are special scrapers or brushes that are sold in car dealerships and are quite inexpensive.
• Never use wipers without wetting fluid, that is, in the "dry" mode. This is how tires wear out.
• In hot and dry weather, when there is no rain, you need to periodically turn on the windshield wipers in the glass washer mode in order to regularly moisten the rubber bands of the wipers. This will prevent them from cracking and losing elasticity, which means it will increase their service life.
• In winter, during the period of constant, even slight, frosts wiper blades must be removed or at least bent them so that the rubber does not freeze to the glass. Otherwise, you will literally have to tear it off the glass surface, and this will automatically lead to its damage, the possible appearance of cracks and burrs, and, consequently, to a decrease in resource and even failure.

As for care, there are also several recommendations here. The main thing is to carry out the procedures described below regularly. So you will ensure long-term operation of the brushes.

• In winter (in frosty weather), brushes are necessary remove and rinse regularly in warm water. This allows the rubber to avoid "tanning". After this procedure, the rubber must be thoroughly wiped and allowed to dry thoroughly so that small particles of water evaporate from it.
• At any time of the year (and especially from mid-autumn to mid-spring), it is necessary to perform regular visual inspection of the condition of the shield, and in particular, rubber bands. Also, at the same time, it is necessary to clean their surfaces from adhering dirt, snow, ice particles, adhering insects, and so on. This will not only increase the resource of the gum and the quality of its work, but also prevent scratches and abrasions from the listed small particles on the glass surface. This is also useful for the brush body, since if its coating is damaged, it can become corroded.

The implementation of the above recommendations will allow you to increase the resource of brushes and rubber bands directly. The main thing is to regularly monitor their condition and take preventive measures. However, if you notice a significant deterioration in the condition of the gum, we recommend that you use some simple tips to partially restore the product.

Recovery

As for the restoration of the condition and functioning of old rubber bands for wipers, there are several recommendations that have been developed by experienced motorists and are widely used by them. So, the recovery algorithm looks like this:

Windshield wiper rubber repair

1. It is necessary to check the gum for mechanical damage, burrs, cracks, and so on. If the product is severely damaged, then it does not make sense to restore it. It is better to buy a new rubber band for the windshield wiper.
2. A similar procedure must be carried out with the frame. If it is damaged, there is significant play, then such a brush must also be disposed of.
3. The gum must be carefully degreased. To do this, you can use any means that are non-aggressive with respect to rubber (for example, white spirit).
4. After that, you need to use a rag or other improvised means to thoroughly clean the surface of the gum from the existing dirt (as a rule, there is a lot of it). The procedure must be performed carefully, possibly over several cycles.!
5. Apply silicone grease to the rubber surface. In the future, it will return the material elasticity. It is necessary to thoroughly spread the composition over the surface in an even layer.
6. Leave the gum for several hours (the thicker the gum, the more time is needed, but not less than 2-3 hours).
7. With the help of a degreaser carefully remove silicone grease from the surface of the rubber. Some of it will remain inside the material, which will contribute to better product performance.

These procedures allow you to restore the gum with little effort and minimal financial costs. However, we repeat that it is worth restoring only a product that has not yet completely failed, otherwise the procedure does not make sense. If the brush has cracks or burrs, then it must be replaced with a new one.

Rating of the best brushes

We present a rating of popular wiper blades, which was compiled taking into account real reviews found on the Internet, as well as their reviews and prices. The following table contains article numbers that will allow you to order the product in the online store in the future. We hope that the information provided will help you choose the best option for you.

DENSO Wiper Blade Hybrid. The original brushes released under this brand are of very high quality, and the reviews about them are the most positive. However, there is a problem - their cheaper counterparts are produced in Korea, but they just do not differ in high quality. Therefore, when buying, look at the country of origin. The brushes are essentially universal, have a graphite-coated blade, so they can be used at any time of the year. The average price as of autumn 2017 is 1090 rubles. The catalog number is DU060L. Original rubber bands-350mm-85214-68030, 400mm-85214-28090, 425mm-85214-12301, 85214-42050, 430mm-85214-42050, 450mm-85214-33180, 85214-30400, 475mm-85214-30390, 86579- AJ050 (by Subaru) — 85214-28080.

Reviews:

• I won't take Bosch anymore, now only Denso
• Korea departed for a year without complaints
• I have Belgian lice, I haven’t used much yet, but I like Korean denso more, after winter I’ll put it on and see
• Always (always always) when choosing brushes, if you read the Internet, which in itself is already a mistake, it is easy to distinguish several types of advisers: from “Kiriyashi supermegavayper ixel” for 5 thousand to “second from the right on the top shelf in the nearest Auchan” for 100 rubles . and supporters of opponents fight with opponents of supporters to the point of stupidity defending their point of view, about any brush there are a lot of arguments for and as many against, the number of positive reviews is approximately equal to the number of negative ones and this battle is destined to continue until the end of time ... and I will go buy Denso Wiper Blade more once, they look cool and clean perfectly)

BOSCH Eco. This is a hard rubber brush. Its body has a metal frame with an anti-corrosion coating by applying a double layer of powder paint. The elastic band is made by casting, from natural rubber. Thanks to this manufacturing method, the blade receives an ideal working edge, on which there are no burrs and irregularities. The rubber does not react with the aggressive components of the windshield washer, does not dry out under the influence of sunlight and high ambient temperatures. Does not crack or become brittle in the cold. The approximate price as of autumn 2017 is 130 rubles. The catalog number is .

Reviews:

• I took Bosch ordinary frame ones, for the price and quality, that's it!
• I've been walking for a year, it's normal in winter.
• Also such yuzal. In general, the brushes are of high quality, but they look somehow foreign. I gave it to Kalina.
• I am for brushes Bosch 3397004671 and 3397004673. They cost a penny, they work great!

ALCA WINTER. These are frameless brushes designed for use in the cold season. They have medium hardness, and work great at low temperatures (produced in Germany). In general, their service life is quite long, in particular, the number of cycles is about 1.5 million. The only drawback of these brushes is the fact that they are undesirable to use in the warm season, respectively, they will have to be replaced. Otherwise, they will quickly fail. Brushes and rubber bands can be used on most cars, but they are especially popular on VAG cars. The average price when buying them through an online store is 539 rubles, the catalog number is .

Reviews:

• Winter took Alca, tinder good in winter
• I do not stop recommending ALCA to everyone for the winter (by the numbers in the "header" of the topic). Already the third winter with them. Excellent!!! They almost never freeze, Ice does not stick in motion. In general, I forgot when the last time I went home for the night I left the wipers up (with the usual ones in our region in winter, this is the only way).
• This is ALCA Winter and only them. The only yards that do not need to be torn off the glass, lifted before leaving home, scrape off ice from them ... In the worst case, before the trip, I slapped them once - and all the ice fell on their own.
• +1 it seemed to me that Alka doesn't even get so hard in the cold, and snow/ice doesn't stick to it much

AVANTECH. These are brushes from the budget price segment. There are various models, both summer and winter, sizes from 300 to 700 mm. Brushes and rubber bands are made according to OEM standards. According to numerous reviews of the former owners of these brushes, it can be concluded that their service life rarely exceeds one season (summer or winter). As for quality, it's a lottery. It depends on many factors - the material of manufacture, their shelf life, size, and so on. However, all this is offset by a low average price - about 100 rubles. A typical variant with catalog number ARR26.

Reviews:

• I took off the winter ones in Avantech cases, they worked perfectly (their previous winter ones served 5 seasons). I tried their summer simple carcases - so far the tinder is perfect. That summer I took cheap autoprofessionals, I thought it would be enough for the season, but after two months they began to clean up terribly.
• Avantech tried frameless for a long time. In principle, a budget option for the price and quality. Against the backdrop of a screwed-up Bosch, I think so - if Denso also screwed up, then there is no point in overpaying for average quality. It’s easier to take Avantech - the quality there is also average, but the price is adequate to the quality.
• Likewise. I put Avantech Snowguard 60 cm (S24) and 43 cm (S17) forward, and Snowguard Rear (only RR16 - 40 cm) back. 2 weeks — the flight is normal, satisfied. Nothing catches, visibility is better
• Took winter avantech for the coming winter. Previous avantech operated only in winter, served 5 winters.

MASUMA. Products of this brand belong to the middle price category. For example, elastic bands 650 mm long and 8 mm thick are sold at an average price of 220 rubles as of autumn 2017. The corresponding catalog number is UR26. Also in the line there are various elastic bands - winter, summer, all-weather. Dimensions - from 300 to 700 mm.

Reviews:

We hope that the presented reviews, found by us on the Internet, will help you make your choice. The main thing you should remember when buying is to try to avoid fakes. To do this, make purchases in trusted stores that have all certificates and permits. This is how you minimize risk.

Instead of a conclusion

When choosing one or another brush and / or gum for a windshield wiper, pay attention to their size, seasonality, as well as the material of manufacture (additional use of silicone, graphite, and so on). As for operation, do not forget to periodically clean the surface of the rubber bands from the debris on their surface, and it is also advisable to wash them in warm water in winter so that the rubber does not wear out so quickly. Also in the cold, you should remove the wipers at night, or at least take the wipers away from the glass. Such actions will not allow the rubber bands to freeze to its surface and protect it from premature failure.

Hybrid wiper blades modern cars are the best brush option both in terms of efficiency and service life. Timely replacement of the main working element janitors- rubber band or just rubber bands, will allow you to seamlessly use regular brushes throughout the entire period of operation of the car.

Good visibility from the driver's seat is an important condition for controlling the traffic situation.

Correct work wipers car one of the components of good visibility in adverse weather conditions - in rain and snow.In the entire history of the automotive industry, this vehicle assembly has not received fundamental changes - the principle of mechanical cleaning of the glass surface from water and snow.

At the dawn of the automotive industry wiper blades were framed, the design used movable hinges with rocker arms that held a rubber band or "gum" with elastic plates inserted into it. The design of the frame wipers was unreliable due to the large number of hinges - over time, they began to play and stagger and, as a result, pressure wiper blades became uneven.

Engineers tried to improve the design wiper blades and exclude unreliable elements - this is how frameless wipers appeared. "The cast "design of frameless brushes is made of a rubber band and a spring frame. But the operation of these brushes in winter still leaves motorists dissatisfied, and perhaps there is simply no limit to perfection!

So the idea came up to combine the best of both designs and create hybrid windshield wipers, in which the system of hinges and rocker arms is closed by a spoiler casing, which, due to the oncoming air flow, presses the rubber band (gum) against the glass, and the casing protects the hinges from snow and ice. But this design also has drawbacks - it is impossible to completely prevent the freezing of wet snow in the hinges.

But, today, such wipers are considered the best and are used in the assembly of cars on the conveyor by the largest manufacturers. Toyota, Hyundai, Mazda, Honda as well as manufacturers of spare parts Denso. In addition to optimal performance, these wipers allow the vehicle owner to maintain good performance by replacing wiper blade rubber throughout the life of the car, without buying a new brush.

When to change wiper blades?
Replacing the rubber bands of the wipers is required when stripes of dirt or water appear on the windshield, entire uncleaned areas due to a rupture of the rubber band, uneven sliding of the “jumping” of the brushes on the glass, when squeaks and “screeching” appear when the wipers move.

Driving a car in bad weather is already a risk, and what can we say if the frontal visibility is significantly reduced. As practice shows, idle wipers often lead to accidents. Let's talk about how to choose the right wiper blade, or, in the common people, a rubber band for a wiper. Today there are enough similar goods in stores, but making the right choice is quite difficult.

General provisions

It is necessary to regularly check the condition of the gum for the wiper. If the product is of high quality, then it serves about 2 years, although it all depends directly on the manufacturer. It is better to change the brushes once a year, their price tag is not so high as to save on this.

It should also be understood that there are several types of wipers:

• frameless;
• frame;
• hybrid.

The frameless design consists of a pressure plate and a brush itself. The disadvantage lies in the non-universality. The fact is that to ensure the correct clamping force, it is necessary to correctly select the wipers. In the case of a frameless design, they are purchased for a specific brand of car, you can’t buy these in every store. But here it is worth highlighting such an advantage as all-weather.

Which gum for wipers is better: hybrid or frame

Frame wipers are good in that they provide a snug fit of the rubber to the glass, however, when the structure is exposed to sub-zero temperatures, the assembly will not work until it freezes. Wiper bands with a frame usually clean better, but are also more prone to squeaks and mechanical failures.

Another thing - hybrid wipers. It is easy to guess that they have all the strengths of frame and frameless and at the same time are devoid of disadvantages. Indeed, such a node is considered all-weather and is not prone to freezing, and also has a fairly long service life. True, the high cost deters many motorists immediately.

Wiper brush length selection

The easiest way to pick up gum for frameless wipers. This is due to the fact that a pair of rubber bands is purchased for one and the second wiper. If you do not know the required length, then take it with a margin.

Nevertheless, in the process of selecting wipers, you should not listen to autoshop consultants, of course, if they do not use catalogs. Always trust the manufacturer. By choosing longer wipers, you will get something like this:

• the need to adjust the washer nozzles;
• deterioration in the quality of glass cleaning (less pressure on the brush - worse cleans);
• wipers can cling to each other during operation.

Therefore, which gum for the janitor is prescribed in the instructions, we take this one, and then we rejoice at the result.

Wiper material selection

Currently, there are no problems with the selection of the type of material. Previously, the rubber band for the wiper was made from ordinary rubber. There were a lot of shortcomings here: creakiness, freezing at low temperatures, cracking. Some types of this material did not have sufficient wear resistance in an aggressive environment and quickly failed.

Since the problem was acute, silicone rubber bands for wipers were gradually put into operation. Although their cost was higher, their performance and resource were much better.

Silicone brushes: advantages and disadvantages

On sale today you can find graphite-coated wipers. Many of them are no longer used, as they are obsolete. Graphite does not provide sufficient lubrication, as a result, the rubber creaks very strongly if there is no washer.

The presence of silicone filler solved many problems. In particular, such an elastic band for wipers does not freeze in frost, and the ice crust is removed easily and quickly. In addition, they glide perfectly on the windshield, there is no creaking in all operating modes. Silicone brushes do not scratch glass and often last up to 50% longer than their graphite competitors.

Brief overview of manufacturers

It is difficult to immediately decide which rubber bands for frameless wipers are better when they are available in every auto shop in great abundance. The manufacturer from Mexico Anco contour appeared on the Russian market for a long time and has proven itself well. The average consumer rating is 4.5. The frameless design has one drawback - it does not clean the center well.

Brushes "Bosch Aero" also have a frameless design. The average score is slightly lower than that of Mexican brushes. Although this is more due to the cost. The price of brushes from Mexico is 1,000 rubles, and Bosch is 700 rubles. As for the quality of cleaning, it is exactly the same as in the previous case. Among motorists, there are mostly only good reviews about these manufacturers.

Heyner Hybrid is another German manufacturer that has excelled in the Russian market. These hybrid wipers received the best score, but not the highest score - 4.5/5. The design looks nice, is not conspicuous, and also cleans well. Oddly enough, the price tag is only 500 rubles, which is also very cheap. These moments on the positive side are also noted by the reviews of motorists. Replaceable rubber bands for wipers allow you to replace failed brushes and install new ones. This is done quite simply and quickly, even a beginner can handle it.

What conclusions can be drawn?

So we have considered which rubber bands for wipers are better. In most cases, it is better to give preference to hybrid designs. They combine not only a long service life, but also high performance properties. True, it is necessary to understand that even such wipers require regular timely replacement.

If the budget does not allow you to choose hybrid brushes or they are not in stock, then you should pay attention to frameless silicone ones. If the wiper rubber can be replaced, even better. So you can save a lot and install a quality product yourself. If graphite brushes creak or glide poorly on glass, it is recommended to lubricate them with silicone. Although the effect is temporary, it may help for the duration of the trip. In the future, of course, it is recommended to replace the brushes with silicone ones, preferably of a hybrid type.