Brake pads do not have specific limitations in terms of service life. It is recommended to check their condition after every 15,000 km of run.
If the car is used in difficult conditions(bad weather, track), then it is worth doing this procedure more often. A sign that the pads need to be replaced is a deviation from benchmark lining thicknesses. The norm should be no more than 11 mm. If the indicator differs significantly from this one, then it is urgent to put new ones.
Pad replacementIX35 DIY is carried out quite simply, for this you need only special tools: stops, lubrication, ratchet.
Do-it-yourself Hyundai IX35 rear brake pad replacement
If you hear creaking wheels or other problems, then do not delay the resolution of the problem. Overlays may already occur in soon. So:
Do-it-yourself Hyundai ix35 front brake pad replacement
The machine must be level, not stand on hills. It must be placed on hand brake. Then:
Replacing the front brake pads IX35 DIY enters the final stage. The following actions:
- The caliper piston is pressed back.
- You need to install it and secure it with bolts.
- If the brake is soft, you will need to bleed it.
Replacing the brake padsIX35 DIY carried out quickly enough, especially if you already have experience. choose original material which will help extend the life of the product.
We are pleased to offer you accessories for Hyundai tuning IX35 with 30% discount only for readers of our articles. To find out more, click on the banner below:
Why do brake discs fail? This is, first of all, wear due to mileage, and it is also important in what conditions the car is operated. With frequent "sports driving", the discs are hot all the time, and if water gets on them at this moment, deformation occurs, which is reflected by a beating when the brake is pressed and steering wheel vibration.
Replacing the front brake discs, the order of work
front replacement technology brake discs on Hyundai iX 35:
- the hand brake is applied
- car wheels removed
- remove the brake caliper along with the brake pads
- brake hose stays in place without detaching
- fixed stopping support wire to shock absorber
- the bolts securing the brake discs to the wheel hubs are turned out
- Removing the brake disc from the car studs
- parts of the hub with which the discs are in contact are cleaned of rust
- after that, in the same order, the brake system is assembled back
Replacing the rear brake discs
Replacing the rear brake discs on the Hyundai ix 35 is carried out in the same way as replacing the front ones. It can be noted that working out on them is not always a sentence for replacement. If the brake discs of the car do not have cracks, and their thickness is sufficient, an economically more justified solution is not to replace, but to groove them. In this case, the surface of the brake discs is processed on a special machine, and after removing the wear and cleaning from rust, their further use is allowed.
For all types of work on the replacement and turning of the brake discs of a car in the network of our Moscow car services, a guarantee is provided. There are disks both original and other manufacturers in Europe and Asia. Extensive experience allows us to offer our customers an excellent price / quality ratio.
We are repairing a Hyundai ix35 car (Hyundai Ai X 35), on which it is necessary to replace the rear brake pads, we will show how this can be done by hand, without resorting to the help of specialists.
Breaking down wheel bolts, raise the car and remove rear wheels. We unscrew the two guides, upper and lower:
Remove and set aside the brake cylinder. We take out the old pads. We check the operation of the guides, in our case the lower one goes softly and smoothly, the upper one is tight. We take it out, clean it and lubricate it with fresh high-temperature grease. We take a clamp or, in its absence, any suitable tool and press the “cylinder”:
We clean the seat of the pads with a brush with metal bristles from stubborn dirt. We have new pads from SANGSIN, spare parts catalog number SP-1187. The inner block comes with a "squeaker", the outer one does not. We install them in seat. We put the cylinder in place and bait both bolts, both upper and lower. Assemble in reverse order. After the replacement, before driving off, press the brake pedal two or three times to press the pads against the disc. The work is done.
Video replacing rear brake pads in Hyundai ix35:
Backup video how to replace the rear brake pads in the Hyundai X 35:
When replacing pads, check the integrity of the entire brake system, look at the condition of the caliper, hoses, anthers, if necessary, replace in without fail your life directly depends on it.
The efficient operation of the vehicle's braking system depends on many factors. A thorough check for lice should be subjected not only to the engine, transmission, suspension elements and steering but also the braking system. After all, the point of the rules traffic 10.1 states - in the event of a danger to traffic, the driver must take all possible measures to slow down to a stop vehicle. And what to do if, say, discs or pads are worn out ?! It is not necessary to bring the brake mechanisms, which are already subject to predictable wear, to a critical state, when a cracked disc can easily block the wheel at speed and no longer, even the most modern intelligent system ABS 19th generation, will not be able to enter into an argument with the laws of physics and common sense.
For our today's guest, to great joy, the situation is not at all dramatic, rather the opposite. The owner bought the necessary consumables in advance and, when the first symptoms of threshold wear appeared, came to visit the Auto-Drive Technical Center on the South. It should be recalled here, if anyone did not know or doubted that brake discs with pads are 100% consumables. on this occasion, our colleagues from the twin auto technical center "VAG x Motors" "walked" .
In turn, we invite you Dear friends, to a virtual course on the replacement and prevention of anterior brake mechanisms car Hyundai ix35.
Drop the wheels and let's get started. visual inspection:
Yes, it's a *gun*. No, we do not tighten the nuts with them, but only the other way around)
Front brake wear hyundai pads ix35
Wear and tear, of course, takes place, although most readers will say that there are still thousands and thousands of miles ahead. But look at the condition of the brake discs - they definitely won’t make the fourth set of pads:
Front brake wear hyundai drives ix35
Moreover, the owner, in his words, feels a beating in the steering wheel and on the brake pedal when decelerating from medium speeds. This could well be caused by overheating of the brake discs due to their decent production and the small residual thickness of the Ferodo layer on the brake pad plates.
Let's proceed directly to the replacement procedure.
Unscrew the caliper:
We unscrew the brake caliper Hyundai ix35
and remove the old pads:
Removing pads Hyundai ix35. The caliper remains hanging on a hook, the other end of which clings to the shock absorber spring.
Old brake pads Hyundai ix35
Removing the brake Drive Hyundai ix35
Photos from the category "Before and after":
Old and new brake components Hyundai systems ix35
Preventive measures for many years of trouble-free service of the front brakes are as follows:
1) When replacing the brake discs, it is necessary to remove traces of scale and any other dirt from the wheel hub. This is done so that the landing of the new brake disc occurs without the slightest distortion. After all, this, in turn, is a guarantee of uniform wear, and hence the absence of vibrations / beats, annoying squeaks and other troubles.
Hub cleaning Hyundai wheels ix35 brushed metal
2) Spray high temperature copper grease on the contact surfaces of the hub and threaded connections to prevent the so-called. "sticking" and "souring" parts:
Surface treatment Hyundai hubs ix35 high temperature copper grease
3) A powerful and effective brake cleaner is used not only to quickly dissolve oily dirt and degrease brake surfaces. Experienced car mechanics successfully use it when carrying out a wide variety of work on the engine / transmission as well as the chassis:
Cleaning a new Hyundai ix35 brake disc from conservation grease
The disks are cleaned and sent to their rightful place:
Drive installed and fixed
4) With simple reciprocating movements of the hand with a metal brush, we service the brackets with plates for installing brake pads:
Cleaning the staple front caliper Hyundai ix35
5) We generously coat the caliper guides with high-temperature grease, which will prevent moving parts of the brake system from wedging and ensure reliable functionality up to next replacement brake pads:
Application high temperature grease on the Hyundai ix35 caliper guides
In a slender row, the pads take their place in the brackets of the front caliper, and the assembly acquires a solid, almost its original appearance:
Installed new brake pads Hyundai ix35
arming ourselves special set to reduce the piston, proceeding to the final stage of the event:
Reduction of the piston in the cylinder spec. tool
Wrenches on "14" and "17" will help the mechanic to securely articulate the caliper with the bracket:
When issuing a car without fail, we give the owner our traditional strong recommendations about the inadmissibility of an active driving style for the first few hundred kilometers. During this period, you should keep an increased distance to the vehicle in front, avoid emergency braking and to stop, gently press the brake pedal until the new pads and discs are properly rubbed together.
The total time spent on replacing the front brake discs with Hyundai ix35 pads was 1 hour 30 minutes.
Our motto is: "Don't wait for repair - provide prevention!"
Details:
Brake discs and pads (provided by the owner)
- brake cleaner Partner (77701)
- high temperature copper grease Partner (30006)
At the checkout:
Replacing the front brake discs and pads: 1800 rubles.
- prevention of front caliper guides: 400 rubles.
- kit Supplies for locksmith work: 400 rubles.
Characters:
Auto mechanic: Ruslan Sinenok
- master-receiver: Artyom Ponomarenko
Automagia service station performs - replacement of the front, rear and parking brake pads Hyundai ix35. Available in a warehouse, it is possible to get both original, and analogs of eminent producers. Disc pads brake system run 18 - 38 thousand km., drum 41 - 60 thousand kilometers. The service life of the Hyundai ix35 pads comes from the driving style and from what kind of box it costs. If an automatic is installed, wear is faster.
It is very important to replace pads in a car when no more than 21% of the thickness is left. We'll take a look at wear uniformity. If there is a violation or distortion in the plane, this indicates that the caliper requires repair. It is cheaper to sort it out when replacing pads than to do it separately.
Service cost:
Car services in St. Petersburg:
Kupchino - 245-34-84
Citizen - 603-55-05
Bolsheviks - 701-02-01
Courage - 748-30-20
WhatApp / Viber: 8-911-766-42-33
Pad change procedure - how the process is performed:
Detailed video instruction:
We will select new auto parts for your style and driving style.
In terms of time, the process takes from 20 minutes to an hour. On the rear drum system - you will need an installation kit (springs, soldiers).
There is a rule in our car repair shops - we always perform lubrication and development of guide calipers, which car owners forget to do when they change them on their own.
On parking brake we will adjust the cable.
Job Guarantee- 180 days.
Good manufacturers guaranteeing effective braking and safety: TRW, ATE, BREMBO, NIBK, BOCSH.
When buying spare parts from us, we provide a discount on replacement and installation.
