Dodge Ram 1500 with rear spring suspension went from 2009. The official carrying capacity of this vehicle is 700 kg. A car with a pickup truck body on springs experiences some discomfort in terms of the advisability of transporting cargo in a car body. When loading a pickup truck DODGE C 1500 several full 200 liter drums, equipment, generators, bags of cement, logs, ATVs, snowmobiles, when connecting trailers and accommodation units on a trailer and other necessary things for which this device is designed, the car sags for maximum spring compression. RAM owners often contact us with a question how to increase payload DODGE RAM.
There are several ways to increase the load capacity of the Dodge RAM 1500:
1. Replace springs reinforced with maximum rigidity.
This option is characterized by a low price of tuning and a fairly simple installation. There are a few downsides to installing hard springs on any car - it's not comfortable driving on an empty car, especially on long trips, it can shake your whole soul and spine. Children and adults may experiencestiff suspension discomfortwith an empty box. Reinforced springs will still sag over time with frequent loads and overloads of the car. The springs do not have a progressive characteristic when the axle load changes.
2. Installing pneumohelper springs Dodge RAM.
This option is distinguished by ease of installation, low cost (often cheaper than buying reinforced springs and replacing them). Pneumocylinders are installed in springs and inflated with air depending on the vehicle load. The car becomes more comfortable and knocked down.Air springsextinguish most of the road surface irregularities (pits, bumps, speed bumps, gravel road and other "joys" of the road). With the help of installed air bags, the carrying capacity of the machine is also increased, due to the fact thatpneumatic elementdoes not allow the car to sag when loading. This method has progressive characteristics by changing the pressure inair springsdepending on the load in the RAM body.
3. Installation of an additional axial air suspension kit specially designed for the Dodge RAM.
This option allows you to significantly exceed the maximum passport load capacity.Pneumatic elementsleeve typemounted on the rear axle of the vehicle next to the suspension spring. Even if somewhere hurtair springor pneumatic line, the car remains on native springs and can reach its destination or repair. An example of such a setup is presented in our report below.
In this project, we installed two-loop control system with receiver:
We recommend that you always install an air preparation system with a receiver. The receiver allows you to raise the car even with a significant overload. All receiver sets use an 8 atm pressure sensor. It is designed to automatically maintain the required pressure in the receiver from 6 to 8 atm.
This is how the panel with a pressure gauge and pneumatic control keys looks like:
At the request of the client installed under the driver's seat:
View from inside the driver's seat:
The entire air preparation unit was installed in a special body niche:
View from above:
This air preparation kit is not afraid of frosty mornings due to the built-in heating in the distribution part air suspension.
This is how it attaches stocking air suspension on the rear axle Dodge RAM:
Also, "stocking" air springs allow you to lift the car up to 8 cm, unlike all other types of air springs.
With this project, it was possible to use 2 points on increase in carrying capacity-install air springs into Airsprings.
General view of the installed Dodge Ram air suspension kit:
Dodge RAM car with air suspension installed on the rear axle:
The installation was carried out in our proprietary installation center at 117 Leninsky Prospekt in Moscow: AIR SUSPENSION INSTALLATION. This kit can also be installed independently using detailed installation instructions with photos in Russian. Estimated installation time is 5-6 hours.
The auxiliary air suspension kit on the Dodge RAM 1500 is installed in addition to the standard vehicle suspension and allows you to reduce the load on the springs. Installing an air suspension will allow the Dodge RAM 1500 to carry more cargo without losing control, eliminate spring sagging and breakage, and reduce body roll and roll. Air suspension on the Dodge RAM 1500 is an excellent solution for increasing the life of the standard suspension.
900 1200 Air suspension Dodge RAM 1500 (09-), rear axle, comfort option, Aride
The air suspension kit is designed specifically for the Dodge RAM 1500 and includes two pneumatic elements, brackets for mounting to the frame and axle, fasteners, accessories for pumping from an external compressor, instructions.
Air suspension Dodge RAM 1500 (09-), rear axle, comfort option, Aride
900
1200
Air suspension Dodge RAM 1500 (09-), rear axle, comfort option, Aride
Installation of the auxiliary air suspension does not require special skills and takes an average of 2 hours. It is possible to install an auxiliary air suspension kit for the Dodge RAM 1500: in our workshop, in any car service, as well as with your own hands.
For the convenience of controlling the suspension from the passenger compartment, it is recommended to purchase a control system. Aride can offer several options for Dodge RAM 1500 air suspension control: from simple and budget, to specialized ones with additional features (for example, wheel inflation)
Air suspension Dodge RAM 1500 (09-), rear axle, comfort option, Aride
900
1200
Air suspension Dodge RAM 1500 (09-), rear axle, comfort option, Aride
You can purchase an auxiliary air suspension kit for the Dodge RAM 1500 from the official air suspension manufacturer in St. Petersburg, Aride, at an affordable price with a quality guarantee. Our company has been producing serial air suspension kits for commercial vehicles for more than 10 years. You can always contact us and get advice on any air suspension kits, as well as find out the price of air suspension for any car.
Our online store is pleased to offer you an auxiliary air suspension kit for Dodge RAM 1500 (rear axle), for self-installation on the most favorable terms!
This equipment is the easiest and most convenient way to increase the carrying capacity, handling, comfort of your car, as well as significantly reduce the wear of standard suspension elements!
The air suspension kit is designed specifically for the Dodge RAM 1500 and includes two pneumatic elements, brackets for mounting to the frame and axle, fasteners, accessories for pumping from an external compressor, instructions.
By installing an auxiliary pneumatic system for strengthening the spring suspension, you get:
- Increased payload without damaging the vehicle
Pneumopillows allow the suspension to cope with loads up to 4 tons!
- Reduced wear on springs
Regular springs are unloaded and work in "greenhouse" conditions.
- Possibility of installation on "tired" springs
Install airbags on springs that require replacement and they will last a long time.
- The correct position of the body at any load
The body is always horizontal, and this is the correct operation of the head light and a decrease in the braking distance.
- Reducing vehicle roll
Pneumopillows keep the car from rolling in corners and align it with uneven loading.
- Increasing comfort
An overall increase in comfort and good handling of road bumps.
- Increasing the profitability of your fleet
Air suspension is an opportunity to carry 2-3 times more cargo in one flight.
Dodge Ram 1500 with rear spring suspension went from 2009. The official carrying capacity of this vehicle is 700 kg. A car with a pickup truck body on springs experiences some discomfort in terms of the advisability of transporting cargo in a car body. When loading a pickup truck DODGE C 1500 several full 200 liter drums, equipment, generators, bags of cement, logs, ATVs, snowmobiles, when connecting trailers and accommodation units on a trailer and other necessary things for which this device is designed, the car sags for maximum spring compression. RAM owners often contact us with a question how to increase payload DODGE RAM.
There are several ways to increase the load capacity of the Dodge RAM 1500:
1. Replace springs reinforced with maximum rigidity.
This option is characterized by a low price of tuning and a fairly simple installation. There are a few downsides to installing hard springs on any car - it's not comfortable driving on an empty car, especially on long trips, it can shake your whole soul and spine. Children and adults may experience stiff suspension discomfort with an empty box. Reinforced springs will still sag over time with frequent loads and overloads of the car. The springs do not have a progressive characteristic when the axle load changes.
2. Installation of pneumohelpers in the Dodge RAM springs.
This option is distinguished by ease of installation, low cost (often cheaper than buying reinforced springs and replacing them). Pneumocylinders are installed in springs and inflated with air depending on the vehicle load. The car becomes more comfortable and knocked down. extinguish most of the road surface irregularities (pits, bumps, speed bumps, gravel road and other "joys" of the road). With the help of installed air bags, the carrying capacity of the machine is also increased, due to the fact that pneumatic element does not allow the car to sag when loading. This method has progressive characteristics by changing the pressure in air springs depending on the load in the RAM body.
3. Installation of an additional axial air suspension kit specially designed for the Dodge RAM.
This option allows you to significantly exceed the maximum passport load capacity. Pneumatic elementsleeve type mounted on the rear axle of the vehicle next to the suspension spring. Even if somewhere hurt air spring or pneumatic line, the car remains on native springs and can reach its destination or repair. An example of such a setup is presented in our report below.
In this project, it was installed with the receiver:
We recommend that you always install an air preparation system with a receiver. The receiver allows you to raise the car even with a significant overload. All receiver sets use an 8 atm pressure sensor. It is designed to automatically maintain the required pressure in the receiver from 6 to 8 atm.
This is how the panel with a pressure gauge and pneumatic control keys looks like:
At the request of the client installed under the driver's seat:
View from inside the driver's seat:
The entire air preparation unit was installed in a special body niche:
View from above:
This air preparation kit is not afraid of frosty mornings due to the built-in heating in the distribution part air suspension.
This is how it attaches stocking air suspension on the rear axle Dodge RAM:
Also, "stocking" air springs allow you to lift the car up to 8 cm, unlike all other types of air springs.
With this project, it was possible to use 2 points on increase in carrying capacity-install air springs into Airsprings.
General view of the installed Dodge Ram air suspension kit:
Dodge RAM car with air suspension installed on the rear axle:
The installation was carried out in our proprietary installation center at 117 Leninsky Prospekt in Moscow: This kit can also be installed independently using detailed installation instructions with photos in Russian. Estimated installation time is 5-6 hours.
Our social channels:
