Polishing allows you to update the appearance of the car, remove minor defects and scratches small chips that appeared as a result of different reasons. This procedure also provides reliable protection from rust. Therefore, if the car has undergone, then polishing is a must.
What is car body polishing know the majority of car owners and not by hearsay. The process itself can be of a different nature and classified according to its functions and purpose. Thus, they are polished as a protection with compounds that contain epoxy resin or liquid glass. There is also abrasive polishing, which is used for a deeper impact and the elimination of significant chips and scratches.
Is polishing a car body harmful?
Should you polish your car? This question is asked by many motorists who had to face the need for such a procedure. And the answer here may be ambiguous. It all depends on the type of polishing that is used. For example, deep polishing is not recommended to be carried out more than three times during the entire period of operation. Since this procedure leads to the fact that the body becomes thinner. Perhaps these are all the shortcomings that body polishing has. Cons can still arise with poor-quality work. Therefore, the polishing of the car body should be carried out by professionals, and not by amateurs and independent craftsmen. Of course, there is nothing complicated in the process itself, but there are many nuances that the masters know from their own experience.Polishing the car body has different pros and cons. Outweigh the pros. After all, thanks to this simple procedure, there is no need for expensive repairs, small scratches, defects and other troubles can be sanded and polished so that no one will guess about them. And this significantly increases the sale, and again manage a new and beautiful car much nicer.
Polishing a car, the pros and cons of which are obvious, is a rather expensive procedure. Despite the fact that there is nothing complicated in the process itself, the availability of a tool, paste and free time determines its cost. By the fact, if you doubt whether car body polishing is harmful, you should study this issue on the forum of motorists or ask a competent master to highlight all the nuances that car polishing has. The pros and cons of this process directly depend on who does it, what and why. It is necessary to polish the car, otherwise in a short time it may lose its attractive appearance and then require a more serious restoration and.
Is it worth it to polish the body
If you want to drive a car with an impeccable appearance, polishing is indispensable. In addition, if you do not run and notice small scratches in time, you can polish the surface of the body yourself. You can even use toothpaste for this. Whether it is worth doing body polishing or not is up to the car owner to decide. But 99% of drivers know the need for this technique to protect the body and its external transformation.In order not to wonder whether body polishing is necessary, whether it is worth doing it or whether you can do without it, you should analyze all the positive / negative sides. In this case, the benefits will be on the face. After all, polishing is an excellent means of protection against corrosion, negative external influences. That is why, to enhance the protective properties of the body, polishing is recommended in spring and summer.
independently hold similar works Can. If it concerns the usual deep polishing, then there is nothing difficult in the process itself. All you need is the tools and time. Polishing the body with a machine is more difficult process, but effective, it helps to solve the problem of deeper damage.
Few drivers do not know what car polishing is and how important it is for its operation. After all, thanks to her, the car can stay new, beautiful and without visible defects for a longer time. All this is possible, because if you accurately imagine what kind of procedure it is - body polishing, why it is needed and how important it is, then there is no doubt whether to do it or not. The main thing is correctly selected polishes, materials, scrupulousness and compliance technological process.
Everyone knows that body polishing is a car enthusiast's best friend when microcracks and scratches appear on the paintwork. But not everyone is familiar with the details and advantages of this procedure. Let's find out more about its benefits. To do this, we have collected 6 important facts, which will help you figure out what car body polishing is, and how it is useful for every car owner.
Body polishing protects against corrosion
Cracks in the coating not only worsen the appearance, but also threaten the appearance of rust. If for a long time do not remove minor defects, they will lead to corrosion, and subsequently you will have to produce full painting auto. In order to avoid large-scale corrosion of the paintwork with reagents, we advise you to apply for restoration and protection in time.
Car polishing can be complex and local
Complex polishing is the most popular option, which means that all body elements are processed. Local polishing is convenient when it is necessary to eliminate defects on a certain part of the car. An experienced master will listen to your wishes, and after the procedure, the car will regain its shine and rich color.
Body polishing helps save on car wash
It's no secret that frequent car washes scratch your car. Polishing creates a thin protective layer, which fills cracks and prevents dirt and varnish-destroying substances from entering them. Therefore, the machine gets dirty less often, and at the same time the number of washes is reduced. Accordingly, there is not only cost savings, but the safety of the car coating.
The frequency of the procedure depends on the intensity of operation of the car and the conditions of its maintenance. But with an average mileage of 20 thousand kilometers per year, it is recommended to polish it once every 6 months. Best before starting winter period and after it. If the mileage is from 50 thousand kilometers, then the holding period is reduced to 3-4 months. Before polishing, be sure to consult with the master about your situation.
Polishing a new car is also necessary
Fresh paintwork prone to scratches and needs protection as well. It is believed that polishing new car stands 5-7 months after purchase, when the paint is well fixed on the body. After that, you can polish the car 2 times a year, taking into account the degree of deterioration of the paintwork, as we talked about in the previous paragraph.
Manual polishing is dangerous for paintwork
Over the years of travel, the car body inevitably loses its original gloss. Particularly subject to gloss loss dark cars. But that's no reason not to buy. This is an occasion to think about the protection of the body. After all, polishing the body, in addition to decorative improvement of the appearance, performs the function of protection from road dust and dirt.
Pros and cons of independent and professional body polishing
Decorative polishing of the body in professional conditions is calculated separately after a series of procedures that cannot be performed in a garage. But protective polishing in your own garage can be done. One has only to wash the car, purchase the necessary cosmetics, a sponge and evenly process a clean and dry body.
True, 6–10 times washing will wash off the polish, but self polishing and is different: it is inexpensive and lasts a year, no more.
It is not recommended to perform abrasive polishing on your own without skills, since it is easier to ruin the paintwork than to create a shiny surface. When professionals who know how to work with specialized equipment get down to business, they remove one or two micrometers at the most, leaving the body paintwork intact.
Together with these micrometers - the thinnest surface film - scuffs, micro-scratches, microscopic surface cracks and other defects go away. They are not visible to the eye, but the body loses its luster, and the car loses its former gloss. The paint layer is removed special tools, equipped with grinding discs that change during operation to hard and soft ones. In difficult places, manual polishing is done.
The second polishing stage is processing with a special abrasive paste, which revives the primary shine of the machine. professional polishing car body- this is a long-term result, and independent garage procedures give a temporary effect.
Due to the complexity of the work, professional polishing do not perform on your own in the garage without the skills and equipment. An excessively removed micrometer of paint will lead to the fact that you have to repaint the car, and this is more expensive than polishing.
Car owners know Maintenance car is not the only kind of care. Appearance is very important, and so that you can be proud of your car, you need to take care of high-quality paintwork. It will protect the car from corrosion and make it beautiful and attractive. However, over time, scratches and chips may appear on the coating. Polishing the body will help save the car, which can be done both in a car dealership and with your own hands.
Exist different kinds polishing of paintwork, distinguish them from each other by the purpose and materials used in the technology.
Variety of polishing.
Wax polish.
This method is the most unstable, the coating will be washed off after two or three washes. However, this polish is the cheapest, so many car owners still prefer it.Teflon polish.
It is based on synthetic polymers and upon application forms a durable coating that has water-repellent properties. After such polishing, the color of the car becomes brighter and acquires an attractive wet sheen. Teflon polish will protect the car from UV rays, metal corrosion and oxidation. Can withstand 6-8 washes.Epoxy polish.
It contains polymers and epoxy resins. Such polishing carries dirt-repellent properties and will not allow aggressive compounds to penetrate under the paintwork. Epoxy polish will protect the car from six months to nine months. Working with this type of processing is quite complicated, and its price is much higher than other varieties, however, all this is fully justified.Varnish preservative.
This coating designed for particularly harsh operating conditions of the machine. It has the most high performance water repellency and resistance to aggressive substances. Varnish preservative creates protective film which is flexible enough to withstand mechanical impact. This coating can last from one to two years.Abrasive polish.
During the application of such polishing, pastes can be used to renew the car's paintwork. It is used in the presence of cracks, chips and scratches on the surface of the body. This type of processing is quite complex, requires compliance with the technological process and large stock time. First of all, it is necessary to prepare the paintwork: remove the top oxide layer and smooth out all the scuffs.abrasive paste gives a gloss to the treated surface and is used to remove scratches that may remain after grinding with coarse polishing wheels. This paste can also remove small marks of oxidation and scratches, including those that may appear when washing a car on the original coating. Abrasive paste is used for machine polishing with wool pads and hard polishing sponges. This process can also be called recovery. First, the damage is processed with grinding skins, the size of which can be selected depending on the depth of the cracks. After cleaning, the surface is already treated with abrasive pastes and then polished according to the type of protective polishing. This method is usually done in detail and applied by professionals to achieve the most effective and high-quality result.
The car, as an invention, is already almost 130 years old, but the polishing of the body was seriously talked about five years ago. And the debate about how much this procedure is generally necessary and what means are best used for this still does not stop.
However, to be absolutely precise, polishing was used much earlier than 5 years ago, but innovative polymer protective coatings appeared relatively recently. New items appear every year. And they deserve the closest attention of car owners.
Today it is recommended to polish the body, immediately after purchase, in order to make it shine and protect it from mechanical and weather influences. After all, insurance does not apply to minor scratches, from which the body most often suffers. Let's take a closer look at what exactly the car's coating can suffer from, which is especially harmful for it.
Washing. This necessary procedure, of course, damages the coating. Mechanical washing has a particularly negative effect: even six manual washes act on the coating less harshly than one “salon” one.
Bitumen. If you do not wash it immediately, then it is almost impossible to do it.
Organics. Crushed mosquitoes, midges, bird droppings, juice from berries contain organic acids that can penetrate coatings, varnish and paint. Therefore, they must be disposed of immediately!
Snow. Soft white snow in the city is not at all harmless! It contains reagents, dust, asphalt crumb. Immediately after winter, scratches appear, and in summer they are especially noticeable.
Rain. Rust appears from water, but the film that forms on the asphalt surface, containing a mixture of water and components of dust, dirt, oil, diesel fuel, and gasoline, is especially harmful.
Dirt on the road is the enemy of varnish. It contains sand and acts as an abrasive.
Sand, gravel. They have an abrasive effect, sandblasting.
Sun. From UV rays, the paint burns out, the lacquer coating is covered with microcracks.
Protective polishing of the body will give the car an external gloss and gloss, protect it from many factors. It is especially useful for trips out of town and long-distance travel.
Types of polishing
Protective. Wax based. Ideal for new cars as it does not remove dirt and polish residues.
Epoxy. Based on epoxy resin. It has an effect at the molecular level, lasts up to 9 months. Provides protection from external environment, dirt and mechanical influences.
Teflon. Teflon based. Serves up to 3 months. Gives water repellency and shine.
Recovery. based on abrasives. Serves for about a year. Carried out using polishing machines. Ideal for older cars. Removes scratches, adds shine, gloss and shine to a newly purchased car.
Nanoprotection. Based on nano polymer. Serves 3 years or more. Provides high resistance to abrasives, acids, salts, reagents and other "chemistry". The machine is easy to clean with water without shampoo, because. dirt does not penetrate into the structure of the polish. The most cost-effective polishing method. Minus one - high cost.
The last two methods can be attributed to the restoration work on the paintwork.
It is important to understand that such brilliant results can be achieved only if the paintwork is very actively influenced. This erases a few microns of the paintwork. Car owners German concerns You don't have to worry too much about this, but Japanese cars The paintwork is an order of magnitude thinner, so it is advisable to update the coating in this way only for heavily “shabby” cars and no more than once in the life of the car.
