Body polishing with liquid glass. Advantages and disadvantages

Body polishing. Yes or no?

It often happens that after body repair, car owners are offered to carry out such a procedure as deep polishing of the body. Surely in this case you have a question about the real need for such a procedure, if everything is clear with the repair of the bumper, then things are different here. After all, in itself, the work of repairing the body and the accompanying painting is already an expensive service. Polishing will make your car shine in a new way. But this is not the only reason. The fact is that almost all cars, even those that were bought recently, have small defects and flaws. And such seemingly imperceptible shortcomings at first glance can subsequently result in a serious problem.

Types of body polishing

High-quality body polishing protects against adverse effects environment, such weather events like precipitation, temperature changes. It is difficult to assess the nature of the damage to the naked eye, but a closer inspection will confirm the presence of scratches, scuffs and tarnishing of the top layer of varnish, because they are not getting smaller every day. It is not a car wash that will help restore its former appearance, from which, after driving several kilometers, there will be no trace left. The only reasonable and long-term solution would be deep polishing of the car, which has the following classification:

• Revitalizing polish
• Protective
• Protective polishing with liquid glass

Protective polishing of the car

Experts recommend resorting to protective polishing in the transitional spring-summer period. With the help of this procedure, the body is covered with an additional layer, which protects the paint from fading in the sun, aggressive environmental influences, and scratches. The most economical option would be non-protective polishing liquid glass and epoxy resin. This is the most common and traditional way, the effect of which will be noticeable for six months from the date of coverage. The cost of coating with liquid glass is three or even four times higher, but it is several points ahead in durability. Update protective layer relating to this type should not be earlier than once every three years. If you have not applied for the service for quite a long time deep polishing body, then in this case your car will be saved only by abrasive polishing or restoring. Specialists resort to it in the case when external damage is pronounced. This is not an easy procedure, the process of which requires a lot of experience and skills. It goes through several stages. To get started, you need to preparatory work. So, the top layer, scratches on it or other defects are removed. The work of the master at this stage is comparable to jewelry work, because the thickness of the layer that can be removed reaches only a few microns. It is important to understand that abrasive polishing should not be carried out frequently, as there is nothing good in constantly thinning the paint layer. The next stage is the application of special coatings to the body, the distinctive properties of which are not only protective, but also restorative. After completing this step, your car will look like new. If you ever decide to sell a car, it is important to know that the condition of the body plays a far from secondary role when evaluating. Therefore, it is so important to keep it in decent condition and not run it excessively.

Compliance with the correct technology is the key to the successful completion of the deep body polishing operation. In no case should such a procedure be carried out without the availability of appropriate equipment and polishing compounds. High and professional quality works can only be guaranteed by car services with a good reputation.

http://bosch-s.ru

Every pedestrian dreams of buying a car, every driver dreams of selling it. So it seems to say catchphrase from everyone's favorite movie. However, old car mobile Selling just to buy a new one. But how long is the car like that, how many years will its varnish play in the sun, how long will the windows be as transparent and expressive, and the headlights will shine like the most bright stars(unless of course it's blinding Chinese xenon). Questions that torment any motorist. For many years, manufacturers have been struggling to create all sorts of means to protect or eliminate scratches, chips, surface haze and other flaws in the paintwork. Various polishes, waxes, protective films, liquid glass and many tools that allow all this to be applied to the surface of the body and return the conveyor shine to the car. How effective all these tools are, you can only understand by trying them. In today's review, let's talk about liquid glass, where it came from, what advantages and disadvantages it has, as well as how much it costs and how you can apply it yourself.

What is liquid glass for a car

Liquid glass for a car is a substance that includes silicon dioxide and silicate compounds. In fact, such a polish is called liquid glass in the common people because of the visual effect that it causes. The body covered with liquid glass has a rich color of paint, the brilliance of freshly applied varnish and a reflective effect similar to a mirror. The polish is applied not only to the body, but also to the glass with headlights. The coating also serves as a good surface protection from an aggressive environment, which is happy to destroy the polish and begin to destroy the paint with varnish, and then the entire car. Such is the nature of our planet, everything that is not created by it, it tries to absorb.

Advantages of body treatment with liquid glass:

• Protection of the paintwork (an additional layer is formed on the surface of the body, which protects the main layer of paint and varnish from mechanical damage, as well as from exposure to aggressive environments, especially in major cities, where in winter period cover roads with various chemical reagents and, of course, from ultraviolet radiation);
• Restoration of paintwork saturation (new paint effect) and color depth;
• The effect of repelling dirt and water (the dense structure of the coating does not allow water and dirt to linger, which significantly reduces the likelihood of corrosion);
• Long lasting effect (compared to standard polishing or waxing. Liquid glass has more long term services without loss of basic properties);
• Relatively low price(the service is not cheap, but in terms of price and service life, it significantly wins compared to other means of restoring the aesthetics of the body).

Disadvantages of liquid glass:

• Like any car care product, liquid glass has its drawbacks, otherwise it would be the perfect tool for all time.
• Difficulty of application (for the correct application of liquid glass, a sterile room is required, without dust and any insects. Ideally, a professional spray booth or a car wash box);
• Long drying time (depending on the manufacturer and method of application, the drying time can last up to several days);

How to apply liquid glass with your own hands

Motorists always face an acute question - to contact a specialist or do everything yourself. Here, as they say, it all depends on financial capabilities, available time and the presence of hands inserted by that end. If there are no car maintenance skills or no predisposition to this, then it is better not to torture yourself and spoil the materials. Take the car to the nearest liquid glass polishing service or leave the car alone. Well, if you can't wait, then start with the equipment of the place where you will do this.

Organize a clean, ventilated box. Next, order a set of liquid glass on the Internet or purchase it at a car dealer (if someone in your city sells it). Now it all depends on the paintwork on your car, if the car is new, then it will be enough to wash the body and degrease it, if the car is already worn out by life with big amount scuffs and small scratches, they should be polished. Do not think that liquid glass is a panacea for all ills, and if you have scratches, they will magically disappear. As practice shows, unpolished scratches under liquid glass will become even more noticeable than before, so you need to get rid of them first. This is done by standard polishing, and only then everything should be degreased so that there is good adhesion, that is, the adhesion of the material to the surface.

The set of liquid glass, as a rule, includes a sponge for applying the composition, rags for polishing, degreasers and surface cleaners, and of course the composition itself. After the surface is ready, blot the cloth with liquid glass composition, having previously mixed all the components (the proportion for mixing in the instructions) and apply it on the surface with smooth movements. It is important to observe the thickness of the layer and in no case lead to smudges. After the entire surface has been treated, it is necessary to wait from 45 minutes to an hour (the time the polish interacts with the treated surface) and remove all excess with a damp cloth. Then start polishing with a dry cloth. I remind you that liquid glass can be applied to metal body panels, on plastic elements, chrome-plated radiator grilles, headlights and even on the glasses themselves, except for the windshield, since Full time job wipers will quickly bring all your work to naught. As you can see, applying liquid glass polish is not so difficult, and if you have the desire and patience, you can do everything yourself without resorting to the help of a professional.

Liquid glass polishing price

The average cost for polishing a body with liquid glass ranges from 6 to 32,000 rubles, depending on the master, the amount of work and the manufacturer of the polish. If you do everything yourself, then the price tag for polish starts from 1000 rubles.

P.S. Those who applied liquid glass to the body state that the final deep color and a mirror shine, the body acquires after a few days, so you should not take the car to the car wash during this period. Be patient.

Preserving the paint layer of the car is one of the main tasks of every owner. The exterior helps the driver stand out on the roads among a large number of other cars. However, the coating is destroyed over time, and its restoration requires significant material costs.

In order to maintain the presentation of the car, polishing is often used. A transparent layer is applied to the body, which protects the paintwork from external factors that accelerate its destruction.

Polishing Benefits

It is common among car owners primarily because of affordable price and ease of application. With sufficient skills, the polishing layer can be applied at home. Among other advantages of polishing, the following points are noted:

Shine. The machine is updated, receives bright color and looks like new. In addition, car headlights and other body elements are polished.

Reliability. The polishing layer protects against dirt, aggressive substances, organic paints and dyes.

Efficiency. Polishing can be done in the shortest possible time if you need to urgently sell the car.

Life time. Depending on the type of polishing, the layer lasts up to three years (polymer coating).

Also, the level of polishing efficiency depends on the quality of the layer application.

Disadvantages of the polishing layer

Despite the reliability and protection, polishing cannot protect the paintwork from all external factors:

Wear. When washing with detergents and a brush, the layer is erased. With frequent salon washing, the polishing layer lasts no more than three months.

Large amount of work. Polishing is carried out on the entire body, and it is not designed to protect individual areas.

Also, the minus can be attributed to another moment when you need to go through the polishing of the body. The wear of the previous layer can only be detected by the fact of damage to the paintwork, followed by its repair.

When is the best time to polish the body

The protective layer, like the paintwork, is destroyed over time and you can only delay this day. Therefore, body polishing is needed immediately after buying a new car.

When purchasing a used car, you need to look at the paintwork. If it soon requires repair, you can wait and then order polishing along with restoration. Polishing the result will always give the car more shine and overall appearance.

Read also:

A driver from the city of Tychy (Poland) sued the Road Transport Inspectorate, accusing it of violating the rights of citizens to privacy. He called a system of automatic cameras for photo and video recording to control speed on a stretch of road as devices that infringe on his personal freedom. Such a system captures the moments of time when the car enters the controlled area...

Situations when it is urgently necessary to get a large sum of money happen to each of us. What to do in such cases and where to run if the bank does not give a loan, and friends are unable to help? One of the 100% options is a car deposit. In our material, we will talk about why it is easier to pawn a car in a pawnshop than to go to a bank and how to choose a car pawnshop. Loan process...

When carrying out rigging, loading and unloading, construction or work related to industrial mountaineering, along with cables, ropes, as well as chains, fastening systems are also used. IN similar systems elements such as hooks for slings, lanyards, clips and so on are used. The safety of operation of mechanisms will depend on these things, therefore, their choice must be taken to the limit ...

Almost every family has a car. Many no longer imagine their lives without this technique. That's right! The car gives a certain freedom to its owner and independence from public transport. But century vehicles not so long and sooner and later the question arises of where to put the old car. Sell ​​- many will say, but alas, the old rusty cars not on the go on are unlikely to find their ...

Body polish included mandatory procedures finishing after the factory or repair painting of the car. At the initial cosmetic polishing the slightest irregularities are removed from the outer surface of the car varnish. The paintwork perfectly reflects light from all angles, the car enamel gets a mirror shine, the depth of the paintwork appears.

Why do you need to polish the body?

During operation passenger car his body is constantly exposed to abrasive influences. Even the road dust, considering high speed movement of the machine, leaves on body parts micro-scratches. Silicon sand crystals are much harder than car varnish and leave scratches not only on the paintwork, but also on windshield cars, headlights, LED optics running lighting.

Micro-scratches are not visible to the naked eye, but after a year or two of operation of the machine, they appear in the loss mirror shine bodywork, paint fading. Other reasons for the tarnishing of the paintwork are chemical effects on the varnish from crushed insects, winter "road chemistry", and solar ultraviolet radiation. Larger scratches from sand and gravel are noticeable on body parts, especially when viewed from the side of the body.

Types of polishing

By depth and application, the following types of polishing are distinguished:

1. Cosmetic. It is carried out with soft polishes, smoothed out with minimal use of polishing machines. It is used after body repair with painting or during short-term operation of the car for perfect look exterior.
2. Deep restorative. Grit-reducing abrasives are used to remove the top layer of varnish to the depth of scratches. Applied after long service life machine, in the event of a network of microcracks, to eliminate noticeable scratches.
3. Protective. It can be used immediately after the purchase or repair of the car for preventive purposes. The composition of polishing compounds includes Teflon, epoxy, nano-ceramic components, which are stronger than automotive varnishes.

Deep restorative polishing in qualified car services is used after a thorough examination of body parts.

Is body polish harmful?

many owners passenger cars worries about whether polishing a car is harmful. Dissemination of information about the dangers of polishing a car is most often carried out by unscrupulous sellers of automotive varnishes, tinting pencils and aerosol cans. Information about the dangers of polishing, erasing paintwork to metal appears on the forums of motorists after the work of inept amateurs.

In fact, applying abrasive polishing (wax cosmetic and protective compounds safe), detailing masters begin work by measuring the paint layer with an ultrasonic thickness gauge. The properties of glyptal, acrylic, polyurethane varnishes, which tolerate polishing in different ways, are also taken into account. Abrasive polishing, depending on the characteristics of the paintwork, can be applied no more than 5 - 6 times.

When restoring polishing, the grain size of the sanding paper and polishing pastes is carefully selected. If the paint layer has thinned to the minimum values, the master will not apply abrasive polishing. In these cases, customers are recommended to paint or varnish the body.

Pros and cons of windshield and headlight polishing

Tarnishing car headlights and windshields is caused by the same reasons. The deterioration in visibility and the brightness of the head light interfere with driving. Polishing of plastic headlights and windshields is carried out according to the same methods as working with a car body. The main difference lies in the use of special polishing pastes for triplex and plastic.

Polishing has no objective disadvantages. Due to the thickness of automotive triplex, glass and plastic headlights, even abrasive polishing is not dangerous. With inept work, you can break the plastic of the headlights, but this does not apply to professional polishing. Polishing is not applied to glasses, headlights with penetrating cracks.

Only amateur deep polishing with abrasives, toothpaste, solvents can bring real harm to the paintwork of a car. Not measuring the depth of the paintwork, not understanding the properties of automotive varnish, plastic headlights, an amateur garage work can cause significant damage to the bodywork and headlights.

These include:

• removing varnish to soft car enamel - when using coarse abrasives;
• burning paintwork - with strong pressure on the grinder;
• cracks and clouding of plastic car headlights;
• iridescent stains on the windshield - when using the wrong technologies and polishes.

The skillful work of car detailing masters cannot harm the car body, only restoring the perfect exterior.

The Auto Gadgets Shop helps customers weigh the pros and cons of polishing car body.

Professionals believe that car body polishing should be carried out immediately after purchase. The procedure gives the car a shine and protects against minor damage:

scratches;

rust;

Atmospheric precipitation;

solar radiation.

Pros and cons of car body polishing

However, it is worth bearing in mind the type of polishing. Abrasive polishing in the first few years is not needed at all. Let's dwell on the types and their features in more detail:

Protective;

Teflon;

Epoxy;

Recovery (abrasive);

Nano-ceramic.

protective polishing necessary to polish and protect the machine from dirt and minor damage. It does not remove the previous layer of paint and dirt. The care product does not contain abrasive ingredients. Its purpose is to protect the paintwork of the car. Service life - six months. When to do it: you can even immediately after buying a car.

Teflon polishing Adds extra shine to the car's finish. It effectively protects the machine from the negative effects of moisture. The service life of Teflon polishing is short. The term of protection does not exceed 4 months - this is a minus. The price of the service is not high - this is a plus. Another disadvantage: there is an opinion that a Teflon-coated surface is less repairable. It is better to clarify whether this statement is true with your master.

Epoxy polish provides deep penetration into the paintwork. Environmentally friendly product contains epoxy resin. The level of protection is high. It protects the body not only from dirt and aggressive environments, but also from mechanical damage. Service life reaches 9 months.

Restorative polishing applies to vehicles with long term services. The product contains abrasive ingredients. For the procedure are used polishing machines. At the same time, it eliminates small scratches and cloudiness of the varnish. The effect of the procedure is stunning. The car looks like it came off the assembly line. However, many experts do not recommend doing this polishing on their car, as a thin layer of paintwork is removed.

Nano-ceramic polishing provides high resistance to negative environmental influences, provides protection from road chemicals, scratches and chips. Abrasives, salts and acids after treatment with nanopolymers do not threaten your car. The structure of the polish reliably protects the body from dirt. It is enough to rinse the car with plain water, without using detergents. The service life of the coating exceeds 2 years.

Summarizing

To the pluses protective polishing car body protection includes the protection of the paintwork of the car from various kinds of damage. And the terms of protection, up to 2 years, are impressive.

The disadvantages include the price of the service and, if you decide on abrasive polishing, the deterioration of the protective properties of the paintwork.

Important! Trust your machine for processing only to specialists. High-quality polishing involves competent application of funds, using special equipment.