Solaris is one of the most reliable car models, but sometimes it needs repair. There are annoying troubles with the automatic transmission, and with the motor, with the wheels and their parts, including the studs.
How to change the front wheel stud Hyundai Solaris with your own hands?
Every motorist should have knowledge about the design of the car. How to change a stud on a Hyundai Solaris wheel? This is easy if you know exactly where the part is located in the wheel structure.
A standard wheel, not a steering wheel, but an ordinary one, consists of:
- disk;
- tires;
- carcass or code on which the tire is attached;
- hubs.
The tire is put on a disk, which is attached to the hub - the axis of strength of the Hyundai wheel structure. The stud is a structural element of the hub.
Wheel stud repair: features
Deformation of the stud causes it to be removed and replaced, otherwise driving performance wheels will drop.
Replacing a stud on a Hyundai Solaris wheel and repairing it consists of the following steps:
- The wheel is unscrewed;
- The disk is removed;
- The hub and bearing are removed.
- Hub stud being replaced rear wheel Hyundai Solaris. For this, two cuts are made with a hacksaw on brake panel, the stud is knocked out of the hub opening with a hammer, a new one is inserted and secured with a nut.
IMPORTANT: Replacing the rear wheel stud of a Hyundai Solaris does not differ from replacing a part for the front, and the cost self repair will be many times lower than in the cabin.
A bit about wheel covers
When replacing the front wheel stud of the Hyundai Solaris, attention must also be paid to the caps on the wheels. The individuality of the car owner is often emphasized by the choice of a cap - a detail that can become an element of tuning.
This eye-catching design protects the disc from dirt and radically changes the look of the car. The cap can be plastic or metal, have a flat or embossed shape.
Replacing studs Hyundai Solaris may be required in the event of a thread break or a break in the stud on which the wheel is screwed. At the same time, the pins Hyundai Solaris are for both front and rear wheels. To replace the front and rear wheel studs, you will have to do approximately the same operations. After all, here and there disc brakes with floating bracket. We propose to consider the process of disassembly and assembly at front wheel Hyundai Solaris.
For work, it is desirable to have a hacksaw (scissors), a file, a hammer, and a set of standard keys.
1. We tear off the wheel nuts.
2. We hang out the front part, finally unscrew the nuts and remove the wheel.
3. Remove the brake caliper, for which you have to unscrew the two bolts securing to the steering knuckle.
4. Remove the disc brake mechanism Solaris.
5. In order not to remove the hub, we change the stud immediately on the machine.
6. With a hacksaw or scissors for metal, we make two cuts on the brake shield.
7. With pliers we bend the freed part.
8. Using a hammer, knock out the damaged pin from the hub hole. It is also possible to extract the stud (especially the bent one) by shortening it by cutting the stud shaft with a hacksaw or cutting machine - “grinder”, and then knocking it out of the hub.
9. In order not to jam the threads on the new stud, you can make a small flat on its head. For example, with a file, or using a grinder.
10. Insert a new stud into the hub hole.
11. We press the stud until its head stops into the hub flange, screwing the wheel nut onto the stud through a suitable bushing.
It is convenient to use a large diameter nut as a sleeve. We assemble the Hyundai Solaris brake mechanism in the reverse order. If you change the stud with the removal of the hub, you will also have to wheel bearing replace, and it is quite difficult. Therefore, do not complicate your life.
We will tell you how to Hyundai Getz replace the front stud without any problems. Although for work we need all the standard tools, keys and jacks, a hammer and think in advance how to fix the car so that it does not fly off the jack when the hammer strikes.
Let's go through the whole process step by step:
1. We loosen the remaining nuts and turn the wheel as far outward as possible. Jack up and remove the wheel from your Getz. We immediately put a signaling on it, we advise you to buy a car alarm in advance on the Internet.
2. Let's move on to dismantling brake caliper, for this you will have to remove 2 bolts marked in the photo below: 
3. As usual, it is best to simply hang the caliper with a rope from the springs so as not to damage the hoses. Now, using a screwdriver, you need to dismantle the two bolts that hold the drum on the hub. 
5. Brake disk can be scrolled, it must be done so that the broken stud is as close as possible to the front of the machine. After that, remove the chip and knock out the remnants with a hammer. 
6. Well, that's almost all, we insert a new pin from the back side, but don't be scared if it doesn't work out, sometimes you have to bend the apron. 
7. To tighten the stud more, it is better to use a nut, which we will remove later, like this: 
That's all, the work is over, it remains to assemble everything in the reverse order.
Frequently asked questions about studs on Hyundai Getz:
1. Is it possible to move to a car where one pin is broken and / or missing, at what speed can it be safe to drive?
Answer: it is better not to use the car at all in this case, but if you make it to the service, then maximum speed 40 km per hour.
2. How much does it cost to replace in the service?
Answer: a new hairpin will cost 80 - 100 rubles, installation depends on the service and the city (300-600 rubles).
3. Do new studs need to be machined after replacement?
Answer: it is better to do this, use from lithol to professional tools, we advise: Copper anti-jamming grease, can be found in any auto market.
For Hyundai Accent fit wheel nuts M12x1.50.
wheel nuts for Hyundai Accent I (X-3)
for Hyundai Accent I (X-3) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Accent I Sedan (X-3)
for Hyundai Accent I Sedan (X-3) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Accent II (LC)
wheel nuts M12x1.50 are suitable for Hyundai Accent II (LC). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Accent II Sedan (LC)
wheel nuts M12x1.50 are suitable for Hyundai Accent II Sedan (LC). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Accent III (MC)
wheel nuts M12x1.50 are suitable for Hyundai Accent III (MC). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Accent III Sedan (MC)
wheel nuts M12x1.50 are suitable for Hyundai Accent III Sedan (MC). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Atos (MX)
wheel nuts M12x1.50 are suitable for Hyundai Atos (MX). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Atos Prime
wheel nuts M12x1.50 are suitable for Hyundai Atos Prime. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Atos Prime (MX)
for Hyundai Atos Prime (MX) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Azera
wheel nuts M12x1.50 are suitable for Hyundai Azera. Show wheel nuts with diameter and thread pitch M12x1.50
wheel bolts for Hyundai Centennial
wheel bolts are suitable for Hyundai Centennial.
wheel nuts on Hyundai Coupe
For hyundai coupe fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Coupe (GK)
wheel nuts M12x1.50 are suitable for Hyundai Coupe (GK). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Coupe (RD)
wheel nuts M12x1.50 are suitable for Hyundai Coupe (RD). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Creta
For Hyundai Creta fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Elantra
For Hyundai Elantra fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Elantra III (XD)
for Hyundai Elantra III(XD) fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Elantra III Sedan (XD)
for Hyundai Elantra III Sedan (XD) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Elantra IV Sedan (HD)
for Hyundai Elantra IV Sedan (HD) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Elantra V Sedan (MD, UD)
for Hyundai Elantra V Sedan (MD, UD) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Elantra VI (AD)
for Hyundai Elantra VI (AD) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel bolts for Hyundai Entourage
wheel bolts are suitable for Hyundai Entourage. Show wheel bolts with diameter and thread pitch
wheel nuts for Hyundai Equus
wheel nuts M12x1.50 are suitable for Hyundai Equus. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts on Hyundai Galloper
wheel nuts M12x1.50 are suitable for Hyundai Galloper. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts on Hyundai Galloper I
wheel nuts M12x1.50 are suitable for Hyundai Galloper I. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Galloper II (JK-01)
for Hyundai Galloper II (JK-01) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Genesis
For Hyundai Genesis fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Genesis (BH)
for Hyundai Genesis (BH) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Genesis (DH)
wheel nuts M12x1.50 are suitable for Hyundai Genesis (DH). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Genesis Coupe
wheel nuts M12x1.50 are suitable for Hyundai Genesis Coupe. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Getz
wheel nuts M12x1.50 are suitable for Hyundai Getz. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Getz (TB)
for Hyundai Getz (TB) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Grand Santa Fe
for Hyundai grand santa Fe fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Grandeur
For Hyundai Grand eur fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Grandeur (HG)
for Hyundai Grandeur (HG) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Grandeur (TG)
wheel nuts M12x1.50 are suitable for Hyundai Grandeur (TG). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai H-1 Cargo (TQ)
wheel nuts M12x1.50 are suitable for Hyundai H-1 Cargo (TQ). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai H-1 Travel (TQ)
wheel nuts M12x1.50 are suitable for Hyundai H-1 Travel (TQ). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai H-1 Van
wheel nuts M12x1.50 are suitable for Hyundai H-1 Van. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts on Hyundai H1
wheel nuts M12x1.50 are suitable for Hyundai H1. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai H100 Bus (P)
for Hyundai H100 Bus (P) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai H100 Van
wheel nuts M12x1.50 are suitable for Hyundai H100 Van. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai H350 Bus
wheel nuts M12x1.50 are suitable for Hyundai H350 Bus. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai H350 Cargo
wheel nuts M12x1.50 are suitable for Hyundai H350 Cargo. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai H350 Van
wheel nuts M12x1.50 are suitable for Hyundai H350 Van. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts on Hyundai i10
wheel nuts M12x1.50 are suitable for Hyundai i10. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai I10 (IA)
for Hyundai I10 (IA) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai I10 (PA)
for Hyundai I10 (PA) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts on Hyundai i20
wheel nuts M12x1.50 are suitable for Hyundai i20. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai I20 (GB)
for Hyundai I20 (GB) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai I20 (PB, PBT)
for Hyundai I20 (PB, PBT) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai i20 Coupe
wheel nuts M12x1.50 are suitable for Hyundai i20 Coupe. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts on Hyundai i30
wheel nuts M12x1.50 are suitable for Hyundai i30. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai I30 (FD)
for Hyundai I30 (FD) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai I30 (GD)
for Hyundai I30 (GD) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai I30 Coupe
wheel nuts M12x1.50 are suitable for Hyundai I30 Coupe. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai I30 CW (FD)
for Hyundai I30 CW (FD) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai I30 CW (GD)
for Hyundai I30 CW (GD) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts on Hyundai i40
wheel nuts M12x1.50 are suitable for Hyundai i40. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai I40 (VF)
for Hyundai I40 (VF) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai I40 CW (VF)
for Hyundai I40 CW (VF) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Ioniq
wheel nuts M12x1.50 are suitable for Hyundai Ioniq. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai ix20 (JC)
for Hyundai ix20 (JC) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai ix35
wheel nuts M12x1.50 are suitable for Hyundai ix35. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai ix35 (LM, EL, ELH)
for Hyundai ix35 (LM, EL, ELH) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai ix55
wheel nuts M12x1.50 are suitable for Hyundai ix55. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai ix55 (Veracruz)
for Hyundai ix55 (Veracruz) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Lantra II (J-2)
for Hyundai Lantra II (J-2) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Lantra II Wagon (J-2)
for Hyundai Lantra II Wagon (J-2) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Matrix
For Hyundai Matrix fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Matrix (FC)
for Hyundai Matrix (FC) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Porter
For Hyundai Porter fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel bolts for Hyundai Porter II
wheel bolts are suitable for Hyundai Porter II. Show wheel bolts with diameter and thread pitch
wheel nuts for Hyundai Porter PickUp
wheel nuts M12x1.50 are suitable for Hyundai Porter PickUp. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts on Hyundai Santa f? III (DM)
For Hyundai Santa f? III (DM) fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Santa Fe
wheel nuts M12x1.50 are suitable for Hyundai Santa Fe. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Santa Fe (SM)
for Hyundai Santa Fe (SM) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Santa Fe II (CM)
for Hyundai Santa Fe II (CM) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Solaris
wheel nuts M12x1.50 are suitable for Hyundai Solaris. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Solaris (RB)
for Hyundai Solaris (RB) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Solaris Sedan (RB)
wheel nuts M12x1.50 are suitable for Hyundai Solaris Sedan (RB). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Sonata
For Hyundai Sonata fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Sonata III (Y-3)
for Hyundai Sonata III (Y-3) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Sonata IV (EF)
for Hyundai Sonata IV (EF) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Sonata NF
wheel nuts M12x1.50 are suitable for Hyundai Sonata NF. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Sonata V (NF)
for Hyundai Sonata V (NF) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Sonata VI (YF)
for Hyundai Sonata VI (YF) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Starex (H-1)
For Hyundai Starex(H-1) fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Terracan
For Hyundai Terracan fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Terracan (HP)
wheel nuts M12x1.50 are suitable for Hyundai Terracan (HP). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts on Hyundai Trajet
wheel nuts M12x1.50 are suitable for Hyundai Trajet. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Trajet (FO)
for Hyundai Trajet (FO) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Tucson
For Hyundai Tucson fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Tucson (JM)
for Hyundai Tucson (JM) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Tucson (TL)
for Hyundai Tucson (TL) wheel nuts M12x1.50 are suitable. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts on Hyundai Veloster
For Hyundai Veloster fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Veloster (FS)
wheel nuts M12x1.50 are suitable for Hyundai Veloster (FS). Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai Verna
For Hyundai Verna fit wheel nuts M12x1.50. Show wheel nuts with diameter and thread pitch M12x1.50
wheel nuts for Hyundai XG
wheel nuts M12x1.50 are suitable for Hyundai XG. Show wheel nuts with diameter and thread pitch M12x1.50
