Motor oil Castrol Magnatec Diesel 5W-40 V 4 (PDF) Synthetics.
Its parameters are:
Viscosity - 5W-40
Name - Castrol Magnatec Diesel (PDF)
Volume - 1 l. or 4 l.
Composition - Synthetic
ACEA specifications - A3/B3, A3/B4, C3
API Specifications - C F
About oil for diesel engines....
The first letter S (Service) indicates the applicability of the oil in gasoline engines, A WITH(Commercial) - in diesel.
The form of writing through a fraction (if there is S / C) means the versatility of the oil - it is approved for use in both gasoline and diesel engines.
The second letter in the designation means the level operational properties(quality class). The farther the letter is from the beginning of the Latin alphabet, the higher the level of requirements met. For diesels it looks like this:
SS - atmospheric or moderately supercharged diesel engines operating in difficult conditions;
CD-High Supercharged Heavy Duty High Sulfur Fuels:
CE - high-pressure release after 1983;
C F- four-stroke releases after 1990;
CG releases after 1994 Improved CF-4 performance and tightened toxicity requirements.
Oils of classes CA and CB are not found on sale, and CD-11 and CF-2 mean approval for use in two-stroke diesel engines.
In addition to the API specification, without fail the class of oil according to ACEA (Association European manufacturers cars). For diesel engines, it looks like this:
B1 -96 - for cars without turbocharging;
B2-96 - for passenger cars with or without turbocharging (standard class):
B3-96 - for cars with or without turbocharging (extra class)
A3/B3 - Highly stable oils designed for use in high performance gasoline and diesel engines of passenger cars and light vans with extended drain intervals for year-round use
A3/B4- Oils with high stability of properties, designed for use in high-performance gasoline and diesel engines with direct fuel injection of cars and vans, also suitable for use in category B3.
E1-96 - for trucks high-boost, heavy-duty (standard grade);
E2-96 - the same, but with better properties than E1-96;
EZ-96 - for trucks with high boost operating in difficult conditions (extra class).
So, in modern light diesel engines naturally aspirated, oils of a class lower than CD according to API or B1 according to ACEA should not be used, and in turbodiesels produced after 1990 - lower than CE or B2. IN THIS CASE THE OIL IS COMPLIED WITH - C F
"WITH"- oils compatible with catalytic converters exhaust gases
C3- Oils with high stability of properties, designed for use in high-performance gasoline and diesel engines with DPF and TWC of cars and vans. Increase service life DPF filter, TWC catalyst and provide fuel economy.
The higher oil requirements for turbocharged engines are not only related to heavy loads for details, but also with ensuring the reliability and durability of the turbocharger - a very expensive unit.
Based on practice, communication, feedback from colleagues, we recommend!
Checking car fluids.
To check the fluid in a car, you do not need to have special skills or special knowledge. What’s more, it will save you some time and money.
Engine oil
Open the hood, remove the dipstick from the engine block, wipe it, insert it back, pull it out and look at the level. If below the minimum mark, then top up. Always check the oil with the engine off.
How often to change the oil on Porter?
Checking once a month is enough. However, a lot depends on the driving style, year of manufacture of the car and climatic conditions. Everyone may have different opinions on this, so it’s better to change according to the manual until you know your optimal replacement time.
Gearbox oil
Checking and replacing transmission oil is not much different from engine oil. The only thing you need is to check the transmission little porter with running engine. For testing, the oil should not smell like burning and should have a red tint. Change transmission oil better in a car service because there are many times more hemorrhoids than with an engine. On average, it is best to replace it in the range from 80 to 160 thousand km.
Antifreeze
Coolant for Porter. If the car overheats, then it's to blame low level antifreeze. To check the fluid level, you need to unscrew the cap expansion tank. The check must be carried out on cold engine. The frequency of replacement is approximately 1 time in 2 years.
Brake fluid
Also, along with checking the engine oil, check the level, brake fluid to Porter. normal color- golden, replacement is best done every two years. Good luck on the road and don't forget to check your fluids.
What oil to use for Hyundai Porter 2 with 2.5 CRDi engine?
Importance of using the "correct" oil in the D4CB 2.5 CRDi engine.
The volume of oil in the Grand Starex (Grand Stareks) engine 2.5 CRDi (D4CB) - 7.5 liters.
The volume of oil in Porter 2 (Porter 2) engine 2.5 CRDi (D4CB) - 6-6.5 liters.
The D4CB 2.5 CRDI engine is a modern, high-tech, diesel engine with fuel injection systemCommon Rail Direct Injection equipped with a turbocharger with variable geometry. These types of engines need a large number of engine oil (the oil volume in the D4CB engine is about 8 liters) and, accordingly, such engines are especially sensitive to the quality of the oil used. The main requirement for the oil used is the toleranceassociations of European car manufacturersACEA - approval C3. Remember that our climatic conditions most detrimental to the car, and are classified as difficult conditions exploitation vehicle, which requires a reduction in the intervals Maintenance. For example: according to the recommendations Castrolfor operation with oil this manufacturer replacement interval at normal mode operation - 15000 km., and in heavy duty operation - 7500 km. The decision how to operate and maintain your car is always yours, but remember - the more technologically advanced, more powerful and harder engine the more expensive it is to repair. Don't skimp on quality regular maintenance your car, use only quality spare parts And lubricants! All spare parts for t/o Hyundai Grand Starex, as well as spare parts for t / o Hyundai Porter 2, You can buy from MyCRDi store.
MyCRDi shop offers original engine oil Hyundai suitable for vehicles with 2.5 CRDi (D4CB) engine.
*ACEA( fr.Association des Constracteurs Europeens des Automobiles, EnglishEuropean Automobile Manufacturers Association) — Association of European Automobile Manufacturers.
Timely oil change Hyundai engine Porter allows you to keep the car in working condition for a long time. In the material below you can find out when a car repair is necessary and under what circumstances it is carried out. technical work for changing the lubricant.
When is an oil change required?
Every car, regardless of brand and specifications, needs to quality repair And diagnostic service. The oil change schedule is in technical passport car from the manufacturer. If there is no data provided, it is necessary to check the lubrication depending on the performance indicators.
Signs of a need for replacement:
- High fuel and oil consumption;
- The engine system does not cope with its task. Often there are failures Idling;
- Noise, extraneous sounds, clicks in the engine;
- Power drop of the power unit.
If one of the signs is found, it is necessary to correct the problem. In the presence of required algorithm actions and the minimum number of tools, this procedure can be carried out even by a novice motorist.
What kind of oil to fill?
The choice of lubricant should be based on the regulations that are prescribed in the technical passport of the car. Both mineral and synthetic oils are suitable for replacement:
- Mineral or oil. Pretty viscous. Lose fast technical qualities. For old-style cars - the best option;
- Synthetic oil. The composition of the product is better than that of the previous substance. Does not lose properties low temperatures, characterized by stability and excellent viscosity and fluidity. Long term operation is due to the fact that the components do not disintegrate during operation.
If you don’t want to buy a not very high-quality mineral lubricant, and a synthetic one hits hard on your pocket. It is best to opt for semi-synthetics: a mixture of high-quality mineral substances with synthetic components.
Oil change steps in a Hyundai Porter engine
Preparation for work is based on an express inspection of the car and diagnostics of spare parts. It is important to establish the degree of complexity of the breakdown and find a solution to eliminate it. Tools are used to solve the problem. At the end, a performance check is mandatory.
Necessary tools for changing the lubricant in the engine:
- container for draining the old substance;
- funnel;
- key;
- set of "heads";
- flyover or pit.
When changing the oil in the Hyundai Porter engine, do-it-yourself draining is mandatory old fluid, bay new and, if necessary, flushing the engine.
How to drain oil?
Sequencing:
- Install the machine on the territory where it will be comfortable to drain the old liquid. It is best to use a repair pit or overpass to facilitate access to the power unit;
- Stop the engine;
- Carefully unscrew drain plug as the engine may be warm and drain the old stuff. This process may take some time as the viscous grease flows out slowly.
If you follow the procedure correctly, then approximately 3-4% of the waste substance will remain at the bottom of the engine.
How to clean the engine?
It is not necessary to clean the engine. Depends on the degree of contamination, the quality of the old mining and the presence of unknown impurities. If the exhaust was with many additional components, it is better to clean the engine with a flush mixture. If this is not done, the remaining particles of the old oil will negatively contact the components of the new one.
Step-by-step instruction:
- After draining the old fluid, it is necessary to change the oil filter;
- Pour in the flushing agent;
- Start the engine and warm up to operating temperature;
- Drain the wash solution.
Checking the filter affects the quality of the initial result of an oil change. If the filter is dirty, the oil mixture may continue to flow.
How to fill in new oil?
Procedure:
- Pour new oil into the engine using a funnel;
- During the filling period, you need to monitor the volume of liquid with an oil dipstick;
- Initially, it is necessary to fill in 75% of the volume of oil from the norm and warm up the engine;
- Then add the rest.
At the end of the procedure, the engine is warmed up at idle. Next, the fluid level is checked again.
Replacement frequency
Factors affecting the frequency of oil changes:
- The nature of driving;
- Intensity of exploitation;
- Engine condition;
- Seasonality.
The duration of use depends on the quality of the products that are poured into the motor. Change oily liquid in the engine you need every 8-10 thousand kilometers or when there are signs of the need for replacement.
