During operation, the plastic parts of the interior lose their original view, overwritten, covered with defects. The masters of the Avtoscratch company will help to fix this. We are professionally engaged in the restoration and painting of interior plastic on client cars.
We always manage to achieve amazing results. To do this, we not only use our experience, but also select the right Consumables, professional equipment. We always find an individual solution for the repair and painting of interior plastic, combining all available methods.
| Name | Price |
| Repair plastic elements salon | |
| scratch repair | from 1000 rub. |
| Crack repair (up to 3-5 cm.) | from 1500 rub. |
| Detail tinting (with the removal of the old paint) | from 1000 rub. |
| Repair of drilled holes up to 1 cm | from 1500 rub. |
| Restoration of missing pieces of plastic | from 2000 rub. |
| Removing the effects of fragrance traces | from 1000 rub. |
| Remove traces of superglue in 1cm² | from 500 rub. |
| Repair of fasteners for interior elements | from 500 rub. |
| Steering wheel and gear knob painting | |
| Steering wheel painting | from 2500 rub. |
| Steering wheel rim painting slight wear, scratch, scuff) | from 1000 rub. |
| Repaired gear knob painting | from 700 rubles |
| Seat painting | |
| Seat repainting | from 2500 rub. |
| Restoration of damaged edging on the seat | from 1500 rub. |
| Painting torpedoes, armrests and door skins | |
| Repair of light damage on the dashboard | from 1500 rub. |
| Repair and tint of leather, car interior leatherette | |
| Scratch on seats or door trims | from 1000 rub. |
| Small scuffs on the area up to 10 cm (leather, leatherette) | from 2000 rub. |
| Cut on the seat | from 2000 rub. |
| Repair of the front of the seat or one seat | from 5000 rub. |
| armrest repair | from 1600 |
| Scuff removal 1 element | from 1200 rub. |
Removing scratches from car interior plastic
Over time, many plastic interior parts lose their original appearance even with gentle operation. They are covered with micro-scratches from nails, keys and hard objects. All these problems are easy to solve - you just need to perform polishing.
The procedure is as follows:
- the treated surface is cleaned of dust and other contaminants;
- with the help of a film and adhesive tape, bordering parts are protected;
- polishing paste and machine are being prepared.
Then, during a three-stage treatment, the scratches on the plastic are removed. First, deep and medium scratches are polished, and then removed minor defects and finishing processing. After that, the remnants of the paste are removed, the result of the work is evaluated. If everything is in order, the car is transferred to the owner.
In terms of price level, the use of a polisher to repair scratches on the plastic of a car is the most affordable way problem solution. However, it does not always fit. For example, if a part is burned or has a damaged paint layer, a more complex repair method is used.
Painting plastic car interior parts
This is a complex repair method that uses sophisticated computer equipment. Without it, it is almost impossible to return the original appearance of the part. That is why it is very difficult to independently paint the plastic of a car interior.
At the first stage, the surface is cleaned of contaminants, degreased and polished manually or with a machine. This provides more high level adhesion. Then the correct shade of paint is selected using a computer.
The very process of restoring the plastic of a car interior by painting is best done in a special chamber. This will prevent dust and specks from entering the uncured paint layer. If necessary, the part is also covered with layers of matte or glossy varnish.
When our master completes the plastic restoration work, the painted parts, after they are installed in the car interior, will ideally fit into the interior. They will return to factory condition.
Restoration of plastic car parts
If you notice on salon plastic deep mechanical damage that cannot be eliminated by polishing or painting, do not rush to order new parts. You still have the opportunity to save money by ordering the restoration of car panels. This is very difficult process which may also require the use of polishing pastes and surface painting.
The surface preparation process is standard: the damaged area is cleaned and degreased. When restoring plastic car spoiling them appearance recesses are filled special material. The Avtoscratch company uses professional plasticizing gels.
The final stage of car interior plastic restoration is removing excess material, leveling the surface and, if necessary, polishing and painting the part. The master achieves such an effect in which the place of damage will be impossible to detect.
Do you still want to try to remove scratches from the plastic of the car interior yourself? You will have to prepare everything you need for this in advance:
- gel plasticizer;
- the right paint;
- polishing machine;
- pastes with different grain sizes.
Also, be prepared for the fact that you can inadvertently spoil some details. They will have to be replaced. This will require additional funds.
If you value your time and want the car plastic painting to be done quickly and professionally, it is better to immediately contact the Autoscratch company. Choose a convenient time, sign up and come to us!
Plastic is a universal material, but it must be handled carefully and carefully, because its strength closely borders on fragility.
Our workshop offers a full range of restoration services and plastic repair any sizes and shapes.
Only professional equipment is involved in the work, which allows you to repair efficiently and quickly in the shortest possible time.
We use a special technology that allows you to restore the surface with high quality. Thus, the product receives the original attractive appearance.
Features of plastic repair
should be carried out by qualified specialists who have all the nuances and skills in the relevant field.
It is important to take into account the details when repairing. For example, polypropylene or polyethylene, the most common types of plastic, have a limited range of temperatures at which they function. It varies from -15 to +120 degrees Celsius.
That is why it is impossible to use cold welding or other adhesive substances in the work.
We work with hot air welding technology, which qualitatively allows you to restore the damaged element.
It is also important to take into account other features of the part, for example, whether pressure arises during its operation. After all, at heavy loads a soldered seam may not withstand and again become unusable.
Plastic repairs can be done with polymers in several colors, including blue, white, green, gray and black. The repaired part becomes sealed.
What do we offer?
When you work with us, you get first class service. affordable price. There are two reasons for this: firstly, we have a powerful material and technical base at our disposal, which allows us to independently install pricing policy our work.
Secondly, our specialists have a significant work experience - from 5 years, which allows them to quickly eliminate even the most complex breakdowns.
We work 24 hours, so we can take on repairs within a whole day.
If you have any questions, our consultants will be happy to answer them.
We will also provide you with an online consultation on the topic you are interested in completely free of charge. To contact us, call the number listed on the site.
Repair of plastic has its own price list, the prices of which depend on the degree of damage to the product. We also provide a guarantee for the services provided.
Plastic soldering is a service, the experience of providing which in our workshop is colossal.
Give us a call and we will surely surprise you!
The world's first automobiles were almost entirely made of metal. Now, the situation is different. Lots of details modern car from plastics. Plastic products, whether in a car or in any other device, tend to break, crack, bend, melt, deform. In this regard, new technologies for the repair of plastic car parts are being created.
Why is it so relevant and important to learn how to repair plastic car parts with your own hands? Because, in addition to the high price, plastic products are more difficult to buy, in most cases you have to order and press the order.
Before learning how to repair automotive parts from plastics at home, it is necessary to understand the terms corresponding to this topic. This:
1. Plastic or plastic mass is a substance called a polymer, which is a binder in its consistency. The properties of plastics differ by adding stabilizers, pigments, plasticizers, and so on to the polymer.
Plastic masses are divided into:
- thermoplastics
- thermoplastics.
Car bumpers are made from both types of plastics.
2. Polymers (Greek origin polys-many, mer-share)- These are substances in which the structures of molecules consist of identical repeating units.
3. Thermoplastic or thermoplastic- This interesting view material that can be melted many times. A feature of this type of plastic mass is that it can be repaired by welding, by melting.
4. Reatoplastic or thermosetting plastic mass is a material that loses its resistance to high temperatures during irreversible chemical reactions during casting. This material can withstand aggressive liquid, solvents. Thermoplastic is not subject to repair and restoration by welding.
5. Adhesion (from the Latin Adhaesio-adhesion) is a material that can be held onto another material due to its chemical composition through mechanical or thermal influences. Adhesives include adhesives that can adhere to steel, wood, and other materials; varnishes, paints.
Damage to automotive plastic products:
1. Scratches- these are not through defects that are created by a friction foreign object. They are divided into deep and superficial. They are classified as surface only if the paint of a plastic part is scratched, for example, a panel in a car interior. Deep ones include if the structure of the material of the part is affected.
2. Dents- types of deformation that appear by force, such as pressure, bending.
3. Cracks- through types of damage. With the constant delay in the repair of cracks, plastic parts, like parts made of other materials, continue to increase.
4. Breaks- through non-linear damage, in which pieces of parts break off.
For the repair of plastic products of the car and not only, in most cases, methods of repair by gluing and thermal repair are used.
Heating repair
To eliminate defects such as dents, heat repair is suitable. The essence of such a repair is to heat the plastic in places of dents to a temperature of no more than 200 C, and gently squeeze it out, straightening the surface. This recovery method is best done immediately and not put off for many months. Then it will be more difficult to restore the surface close to the original.
Bonding repair
Bonding can be used to repair thermal and recto pastes. A special glue is used, which, after drying, turns into a polymeric material. For quality repair plastic products by gluing, it is necessary to choose the right glue. For example, when gluing a car bumper, the glue seam should be close to physical properties bumper material.
Repair by welding
The method of restoring plastic parts by welding is reliable. Its essence is to connect broken surfaces without the intervention of foreign materials and make them homogeneous. Welding is only suitable for thermoplastics.
Repair of cracks in car parts by welding consists of the following steps:
- 1. Surfaces are cleaned on both sides from the future seam of the surface at a distance of up to 15 mm.
- 2. Drill holes at the ends of the crack so that the crack does not grow.
- 3. The edges of the seam are given a V shape by cutting off the corners.
- 4. We heat the area of \u200b\u200bthe seam with a professional hairdryer.
- 5. Connect the two parts to be welded. Connect by tacking. That is, after a certain distance, the seam is heated and connected. After that, full welding is carried out along the entire seam.
For reliability, boil on both sides. After that, finishing is carried out and painted. After you can solder, weld at least once with your own hands plastic products, you will do it in a few minutes.
Table of fines from September 1, 2013,
Plastic repair with the help of an industrial hair dryer - the most optimal and reliable option. Such weld will not be inferior in strength to any other part of the part, and if inside weld another thick layer, you get the strongest section on the entire part.
It may seem why other methods of restoring the plastic of moto and auto parts are needed, but everything is not so simple - you need to have the appropriate skills before undertaking repairs. Experts recommend trying on unnecessary plastic with a crack to “fill your hand” before taking directly on plastic repair motorcycle or car parts.
The first test will show that you most likely simply deform the part or under-weld the seam - such repairs will not bring any result. In addition to practice, a financial issue arises - to carry out such work, you will need the hairdryer itself, with the ability to adjust the air supply and adjust the temperature conditions - such a product will cost about 3-5 thousand rubles + special nozzles.
If such costs do not frighten the average user, then you can proceed directly to do-it-yourself plastic repair.
We select the necessary material and tools for plastic repair
For execution do-it-yourself plastic repair you will need the following materials:
- Industrial dryer. Experts recommend using models from famous brands, such as Makita, Bosh, HG, etc. Read the reviews and see for yourself - these models are very practical, durable and reliable. With them, you can safely repair plastic parts for several years. Some craftsmen use hair dryers for soldering radio components - they are ideal for soldering small cracks;
- A set of special nozzles, with a diameter of 5 to 8 mm. In most cases, they are sold separately from the hair dryer itself. Depending on the brand, they can cost from 100 to 800 rubles. For example, on the same Makita, one nozzle costs about 600-700 rubles;
- Solder plastic. It should be remembered that the plastic must be identical to the plastic of the part. It can be purchased at a specialized store or cut yourself using old identical parts. Usually, "store" solder is sold in coils - it is convenient and practical.
To repair plastic, you can use additional tools, such as:
- Grinding machine - the master will need to grind the seam. It is not necessary to buy it, because sandpaper or a set of files is ideal for such purposes;
- Several clips to secure the seam. They can be purchased at any building market.
If everything is completed, then you can safely proceed to the work.
Step by step instructions for plastic repair
Consider plastic repair step by step, so that it becomes clear even to an inexperienced repairman:
- Initially, you should find out the composition of the material from which the damaged part is made. Pay special attention to the fact that the plastic of the solder must be identical to the plastic of the part being repaired. Given this factor, the craftsmen set the required temperature for heating the air - if the solder and the part itself do not match, one of the materials will not warm up well and simply fall off. Or overheating will happen and the part, like the solder, will “float”, which will lead to a disastrous result. The material index (marking of the plastic part) can be found by looking behind the back of the component being repaired. In most cases, there are three main types of plastic: PP (polypropylene parts), ABS (acrylonitrile, butadiene and styrene products), and finally, PA (polyamide parts);
- Cleaning the part before repair work. Before you start restoration work, the edges of the crack of the damaged part must be carefully cleaned to get rid of protruding plastic teeth and chips. These manipulations are easy to perform with a file or sandpaper - experts recommend cleaning 5-10 mm from the edge of the fault on each side;
- Part assembly. In the event that the part has crumbled into several separate pieces, the master will have to sweat and assemble the part in the manner of a puzzle. Every separate element will have to be cleaned around the edges and installed in its rightful place. So that the “assembly” does not fall apart, we fasten the entire mosaic with clamps (similar to small clothespins). Their cost is low and they can be easily obtained at any hardware store (the price does not exceed 70 rubles per 1 piece);
- Welding work. We take one rod (solder), sharpen its tip and gently press it to the edge of the cleaned fracture. As it heats up, we begin to heat the solder and plastic. When set correctly temperature regime and the level of air supply, we begin welding work, warming up the twig and leaning it against the heated part. The jet of air itself will press the heated plastic, so you don’t need to do anything with your hands.
That's it, we have completed the repair work.
Brief summary
Now you know how to restore a plastic part on your own, without contacting specialists. After welding work it remains only to align the protruding welding to the level of the part and that's it. It remains only to paint the part and install it on a motorcycle or car.
Video - do-it-yourself plastic repair
Despite the fact that plastic is not the most common material used in the manufacture of a car, car plastic repair has always been an important activity in the field of car care and maintenance.
Speaking about the plastic components of the car body, we can first of all recall the bumper of the car, which, as a rule, is made of plastic. Plastic is also used to create covers for mirrors, where it is especially susceptible to various kinds of damage, as well as in many other car parts, especially inside the car.
In case of damage to the plastic in the car, repair plastic parts would be the best way out. Of course, the first thought that will haunt the car owner is the replacement of damaged parts, but it is fair to say that many plastic components of the car are subject to restoration even in the event of severe and severe deformation.
We will repair the plastic parts of your car
Repair of interior plastic parts is one of the most common works performed by employees of the NIVUS technical center. Since various kinds of traffic accidents entail damage not only to the body part of the car, but also to the interior of the passenger compartment, the plastic parts in it often turn out to be broken and destroyed. In this case, the specialists of the technical center are taken to repair the plastic products of the machine.
Note that the repair of plastic parts of a car is the procedure that should be entrusted to professionals. The reason for this is the “capriciousness” of plastic as a material, which makes it difficult for an inexperienced person to work with it. And the repair itself has many nuances that only qualified specialists are usually familiar with, because there are many stages of it and all of them are far from being as simple as it might seem at first glance.
This process consists of several stages:
- impact on the item high temperature;
- its gluing;
- straightening the part;
- putty;
- detail grinding;
- primer details;
- painting;
- applying lacquer to the item.
If you need to repair the plastic of the car interior - the employees of the center Maintenance"NIVUS" will carry it out with the highest quality and in the shortest possible time. Repair of plastic in the technical center "NIVUS" is a guarantee right choice and worthy of your car repair!
