How to pull out a prolodgy car radio from a regular place. Removing the head unit

13.06.2019

Many motorists face the problem of removing the radio in the car. Some cannot pull out the standard device installed at the factory, others inherited music along with the car, and others simply lost their special keys. There are also enough reasons for dismantling - from repairing wiring to buying a new stereo system. Hence the demand for information arose, how and with what help you can carefully remove the car radio without damaging the plastic of the front panel. And although the operation is primitively simple and calmly performed by improvised means, it has pitfalls that you need to be aware of.

Varieties of radio mounts

To choose how to remove the car player, you need to understand how it is fixed inside the panel. There are the following types of fasteners:

on 2 side clamps;
on 4 latches located on the side and top of the case;
fastened with self-tapping screws or screws to the brackets.

Note. The last method of fixation is typical for standard devices, which the car is equipped with by the manufacturer.

The principle of mounting on latches (latches) is that the body of the radio is enclosed in a metal mounting frame, and not directly integrated into the panel niche. This intermediate part, which has special petals with protrusions or grooves (depending on the brand and model of the device), is securely fixed in a niche. The body of the turntable is equipped with reciprocal latches that engage when the turntable is inserted into the socket.

Keys are used to unlock the latches and remove the car radio various forms supplied by the manufacturer complete with music for the car. They are lost over the years of operation of the car, since they are used extremely rarely. As a rule, the key is a figured strip of metal or a pen inserted into 2 pairs of holes located on the front panel of the device.

The fastenings of regular radio tape recorders are most often made on bolts screwed to the brackets and hidden under the front plastic panel. Here you can not do without a minimum set of tools for dismantling this panel and unscrewing the fixing screws or bolts.

Reference. All of the above wisdom with hidden latches and special keys were invented by manufacturers with one goal: to make it as difficult as possible to steal a car radio when thieves break into a car.

Removing the device according to the instructions

The algorithm for removing the radio in the presence of keys is simple to disgrace. It is worth considering in order to understand how to act in case of their loss. The order is as follows:

Remove the player's front panel and decorative plastic frame by prying it out with a flathead screwdriver if necessary.
Insert the first key into the slot between the housing and the mounting frame located at the end. You should feel a slight resistance when the tool bends the latch.
Repeat the same action with the second key.
Take the radio with your hands by the protruding parts on the sides of the case and carefully remove it from the niche.

Advice. You don't need to apply much effort, the device should be removed quite easily. At the end, be careful once again do not pull the wires and do not break the contact.

When the radio is equipped with four latches, they are accessed through 2 pairs of round holes. It is necessary to insert 2 U-shaped keys into them and pull them out by the body, as described above.

How to remove the player - video instruction

How to remove the radio without keys?

If the standard keys are lost, you need to make homemade ones, focusing on the shape of the slots. To see them, remove the removable panel of the device and the plastic frame. Here is a list of improvised means, with whose help the owners different cars manage to unlock the latches:

thin steel strips 6-15 mm wide;
stationery knives;
plastic clamps for electrical wiring;
carnations and even wire - for round holes;
thin screwdrivers and other similar items suitable for the shape of the slots.

Reference. In many recorders mounting slots are visible from the outside, so there is no need to remove the front panel and plastic frame.

To pull out the car radio, use the same algorithm:

Insert into the technological opening, first one, and then the second strip of thin metal(or a clerical knife, a thin screwdriver). Feel every latch unlocked.
If the turntable is held by 4 latches, insert four tools.
Slowly remove the radio from the niche at the same time as the impromptu keys.

Advice. When you use steel strips to open the latches, be sure to wear cloth gloves so as not to cut your hands on sharp edges.

Video on removing the car radio without keys

Dismantling of the regular music center

Often, standard head units (they are also radio tape recorders) are removed in the manner described above, since they are attached to 2 or 4 latches. For example, a factory player on a Lada Priora car is held on by two latches, and in order to unlock them, thin steel strips must be inserted between pairs of radio channel switching buttons “2” - “3” and “5” - “6”.

Advice. Before proceeding with disassembling the factory radio, find out about the method of its attachment, so as not to poke the pieces of iron at random if you do not find technological openings.

To remove car radios screwed on, you need to prepare a simple set of tools:

thin flat screwdriver or knife;
a Phillips screwdriver;
a set of heads of small sizes (from 6 to 10 mm).

On various brands auto regular players can be mounted in different ways, but the principle is approximately the same: the device is bolted to brackets that are closed from the outside with a plastic lining. As an example, it is proposed to consider the removal of the radio on Korean car Hyundai Solaris executed in the following order:

Pry with a flathead screwdriver or knife bottom corner plastic decorative panel framing the music center. Pull back the edge and grab it with your hand.
Gently pull it towards you and release the first latch, and then move in a circle and unlock the rest.
Holding the panel with both hands, remove it and, if necessary, disconnect the connectors located at the bottom.
Unscrew the 4 mounting screws with a Phillips screwdriver and pull out the radio.

Advice. When dismantling any player, do not rush to disconnect the battery from onboard network, because the device after 10-15 minutes. may be blocked and the next time you turn it on, you will need to enter a security code that you do not have.

Removing the standard device on Hyundai Solaris - photo

The edge of the panel is hooked with a knife and lifted The edge of the panel must be picked up by hand The decorative panel is removed by hand
To remove the panel to the side, disconnect the connectors The player is held on by 4 screws that need to be unscrewed When the screws are unscrewed, the device can be easily removed

Decoding problems

The main pitfall of the described procedure lies in the security code embedded in the memory of most radio tape recorders. The bottom line is this: disconnecting the music center from external power for 10-15 minutes will lead to the fact that the next time you turn on the car radio, you will be asked to enter a security code (usually four digits), without which it will not function.

Advice. Removing the unit to replace it with a new one is not a problem, unless you plan to use the old player on another machine. In any case, try not to disconnect the battery for a long time.

If the code card is lost or missing, the issue can be resolved in several ways:

when it comes to a standard device, then for a fee they will help you find the code in dealer center selling cars of your brand;
there are firms and individuals dealing with these problems;
free way - search for code through various programs.

Regardless of the method chosen, you will have to remove the radio from the socket to find out serial number. It is applied along with a barcode on a tag pasted on the side or top of the case. After pulling out the device, rewrite these numbers, and then try to calculate the pin code from them using various online calculators on the Internet. If it was not possible to determine the desired cipher using this method, then remove the music center and carry it to specialists in this field and get ready to pay for their services.

An important point. If you do not know the pin code of the radio, then when searching on your own, do not enter combinations of numbers more than 3 times! Otherwise, the device will be blocked, and in this state, its decoding will cost much more.

The issue of removing the car radio from the socket is not very difficult and will not take much time. But the consequences can be unexpected for an unprepared motorist. Hence the last tip: find the lost pin code before turning off and removing the player in order to save your time and nerves.

And each of the lovers of high-quality sound has to face a choice: seek help from professionals in their field, that is, a service one, or try to save money and do everything. But here you need to remember that removing the car radio is not so easy, the occupation requires accuracy and accuracy. Otherwise, you won’t be able to save money, and you may even have to overpay, because it’s always easier to break something, you can damage the skin or plastic. So think ten times before you get to work if you have no experience in dismantling.

If you nevertheless decide to carry out this action at your own peril and risk, then remember that in order to remove the car radio you will need special factory keys. Each manufacturer has different mounts on the radio, so be careful and carefully select the right tool. To do this, you first need to carefully inspect the car radio for holes and fasteners.

Purchase special keys. Each brand of car has its own individual keys. Usually a set of such keys is attached to a new car along with other components. Choose a tool based on the fasteners of your radio. For example, if you dismantle radio tape recorder in Audi and Volkswagen cars, then keys with a long base and at the end will suit you. Be sure to disconnect the cable from the negative terminal of the battery before carrying out work.

Silence and carry out all manipulations with idle engine. Each has its own specific place for the audio system. Determine where in the special metal or plastic casing is located, in which the . When dismantling the radio, it is important to be precise and accurate in actions so as not to damage the electrical wiring. Consider the moment that in some machines there is a special mount in the form of a metal sled. If they are installed, you need to press special mounts and continue dismantling the radio.

Take out radio tape recorder out of the cover and carefully disconnect all connectors from the power supply. Unscrew all the contacts and terminals from the radio using a set special tools. Remove the plug from the connectors very carefully so as not to damage them. Now you can repair the radio or install a new, more modern version of it.

Head unit is an integral part of every modern car. Carefully monitor its functional state. This will increase the life of the device for many years. If the radio is damaged, take appropriate measures to repair it. If you are unable to repair it yourself, contact an auto repair shop.

Instruction

On domestic market presents a wide variety various types. If you don’t like the head unit of the car, you can replace it with a new one at any time. In order to pull out the head unit as quickly as possible, arm yourself Phillips screwdriver and tweezers or an iron ruler with which you will hook the top panel. Gently slide the ruler under the plastic cover that protects inner content devices from various mechanical influences.

Having hooked it, slowly pull it out. It is usually held on by 4 clamps. Next, unscrew the screws that secure radio tape recorder to the body with a Phillips screwdriver. Then pull the device towards you. To disable radio tape recorder, pull the blue stacks up and remove the connector completely. Just pull the antenna towards you. It sits pretty tight, so put in a little effort. That's it, the radio tape recorder is complete.

The above procedure for removing the head unit is suitable for any brand, since all modern radio tape recorders have a similar design. Carry out all actions carefully and accurately, do not make unnecessary careless movements that can seriously affect the integrity of the radio, and it will become unsuitable for further resale. Installing a new radio tape recorder, follow the same sequence, just follow it in reverse order. And you will put it in place as quickly as possible. When choosing a device, pay attention to its specifications, it must support all the most popular communication standards, have for . Leave your car overnight in a guarded parking lot or underground, so you save your newly installed radio tape recorder from theft.

Head unit may not always meet the requirements of a motorist. Indeed, often new cars are equipped with an audio system in such a way that its price does not increase the cost of the car. To put in the salon new radio, you need to dismantle the old one.

You will need

- special keys.

Instruction

Soberly assess your strengths. In some models, it is required to disassemble half in order to get to the radio mounts and pull it out. Moreover, even if there is correct process it can be delayed if it has already been used for a long time and the radio mounts in the mounting sockets.

Check Availability special keys in order to take out head unit. These keys should be included with the audio system manual. If the keys are lost, you will have to go to the dealer or to the market. When visiting the market, take the instructions for the device with you or simply write down the serial, manufacturer and model of the radio in a notebook so as not to make a mistake in choosing and answer clarifying questions from equipment sellers.

If the keys could not be purchased, ask the sellers how to replace these devices. Pay attention to recommendations experienced drivers. So, for example, in Toyota, it can be successfully pulled out using ordinary skewers sold in many stores.

Before starting work, be sure to disconnect the negative battery cable. Be careful with wiring. Do not damage the connectors. If it’s just wires, prepare a marker and adhesive tape in order to navigate through the huge number of wires after dismantling, which will appear in place of the pulled out audio system.

Apply keys or their substitutes. Pay attention to the method of advancing the radio in the place of dismantling. Some car models are equipped with a hard mount for the audio system, others use metal skids. If you have skids, you will need to detach the specially designed fasteners and continue working. Completely de-energize the radio, unscrew all contacts and terminals. Very carefully disconnect the power supply and remove the radio from the installation casing.

The standard audio system of most cars does not satisfy the requirements of avid music lovers. Therefore, there is a desire to install a new car radio. But to do this, you must first remove the standard head unit. This procedure is difficult for many car owners.

You will need

- a special set for removing the radio;
- cotton gloves;
- manual;
- building hair dryer;
- new cladding

Instruction

Open the hood and remove the negative terminal from the battery to de-energize onboard system nutrition. This is a precautionary measure, since when removing the radio, you can inadvertently short the wires. Read the instruction manual for your

In order to remove the regular car radio from the car, no special skills are required. All that is required is a set of special keys supplied with the device. But what if there are no keys? Is it possible in this case to remove the radio from the niche without breaking it? This will be discussed in today's article.

Removing the radio with standard keys

Before proceeding to the process, we list what is needed for this.

Required Tools

Standard set of keys supplied with the radio (keys can be either 2 or 4, depending on the model of the device).
Knife (if you have to pry the frame).

The sequence of extracting the car radio from the niche

The front panel of the car radio is removed, if necessary, the decorative frame under the panel is also removed (on older radios, this frame usually blocks the key slots, on more modern devices this problem does not exist).
Provides access to keyholes. They are located at the side walls of the radio.
Regular keys are inserted into the holes until they click. Sometimes this will require considerable force, or slightly shake the key to the left and right, while pressing it into the hole.
After the keys are installed, the device is carefully pulled out of the niche.

Video: removing the car radio with regular keys

Removing the radio without keys

Sometimes it happens that there are no keys for some reason. They can be lost, and in especially severe cases, they are simply not included in the package. In such a situation, you will have to use improvised materials.

Required Tools

2 pieces of steel strip (length 30 cm, width 1 cm, thickness 0.5 cm).
Protective gloves.

The sequence of removing the car radio without keys

Video: removing the radio with two steel strips

Important Points

When removing the device from a niche, in no case should you make great efforts, since you can damage the wires behind the radio.
If steel strips are used to remove the device, then they must be used only with protective gloves, otherwise it will not be possible to avoid cuts.
Steel strips are far from the only handy tool that can be used to remove the radio. Very often, motorists use old ATM cards or thin plastic rulers, from which “keys” are cut using ordinary scissors. And sometimes even barbecue skewers are used to remove the radio.

So, you can remove the radio from the niche without keys. This can be done with the help of improvised materials, fortunately, there is no shortage of them. If we are talking about modern radios, then preference should be given to "keys" made of plastic, since the cases of these devices in most cases are also plastic, and metal tools can leave deep scratches on them.

On many automotive forums, you can often read questions from motorists about how to remove a head unit. In this article, we will talk about some tricks and subtleties for correct and quick removal. Of course, it should be clarified that it is possible to remove the radio built-in at the factory, taking into account the brand of the car and the vehicle equipment necessary keys and screwdrivers.

Absolutely all built-in car radios are protected by fasteners hidden from the eyes. Also, each car manufacturer, of course, uses its own developments, which differ in the process itself: from snap-on mechanisms for fastening to those screwed in with special screwdrivers.

Removal tools

keys, different types, which are usually equipped with a head unit at the factory;
screwdrivers, with tips in the form of stars or hexagons;
stationery knife;
plastic card - to make withdrawals on some models, at home;
tweezers in order to remove the lining in some cases.

To remove the radio with your own hands, you need to know some little tricks that will tell the photo below.

By design, the radio in different cars has a different configuration. There are usually 4 round holes, two rectangular ones. They also differ in their approach to the removal of regular radio tape recorders. Of course, if there are keys that are included with the radio together with the car, the process will be simple and will take only 5-10 minutes.

Instruction

First you need to dismantle the cover of the radio, in the form plastic panel. This should be done carefully so as not to scratch the skin and so that the radio itself is not damaged. Next, sequentially unscrew the bolts that secure the head unit with a screwdriver. Pull out the radio and carefully disconnect the connectors. To do this, pull up the blue locks and press on the released petal, disconnecting and removing the connector from the radio. The antenna is simply removed from the socket.

The simplicity of these operations does not exclude the utmost care and slowness in their implementation. Removing the head unit is quite easy.

Important Points

The holes are sometimes secured with screws that must be removed with a hex screwdriver. Slightly spread the grooves to the sides. The device is pulled towards itself.
Rectangular holes have a different mechanism by which the radio is removed. Two keys are inserted from different parties, all the way. As soon as a click is heard, which means the locking latch has been pushed back and the key has been fixed, you can pull the radio towards you.
Sometimes, the head unit requires 4 keys in stock, but with patience and accuracy, it is possible to do everything with the help of two. Having first installed both keys on the left, we slightly pull out one side, then we do the same for the other side. The car radio has been removed.
If the keyhole is not visually observed, then you just need to remove the volume control, seeing the hole for dismantling the radio, turn the hex screwdriver counterclockwise and remove the panel. Further, it is also easy to see two screws, and unscrew them with the same screwdriver.

If you want to see in more detail how to remove the radio, the video shows the process step by step.

In more modern stamps car radios are decorated to match the design of the salon itself, and the mounts are hidden behind the grille, which performs a decorative function. Then the removal takes longer and requires additional operations.

The process of removing the radio

The removal of the head unit is carried out as follows:

Raise the armrest by removing the glass.
After observing the tensioners hand brake, push the cup holder upwards. The panel can be easily removed.
After removing the panel, we will see two screws. They need to be unscrewed and removed.
The screws that fixed the beard should be set aside and removed as carefully as possible. The beard is also fastened with latches.
Disconnect the clock connector.
Having disconnected the climate control, we put off the beard.
After that, access to the bolts of the radio opens, and removing it with your own hands remains a matter of simple technique and skill.

Results

Using this instruction, you will change the car radio in your favorite car without any problems, nerves, lost money and time, and you will enjoy the trip to your favorite tunes.

How true remove radio no special keys

Many motorists face the problem of removing the radio in the car. Some cannot take out the standard device installed at the factory, others have inherited music together with the car, others have routinely lost their special keys. There are also enough dismantling circumstances - from repairing the wiring to buying the latest stereo system. Hence the demand for information appeared, how and with what help you can carefully pull out the car radio without damaging the plastic of the front panel. And although the operation is primitively ordinary and relaxedly performed with the means at hand, there are pitfalls in it, about which

Varieties of radio mounts

To choose a method of removing the auto player, you need to understand how it is fixed inside the panel. There are the following types of fasteners:

on 2 side clamps;
on 4 latches located on the side and top of the case;
fastened with screws or screws to the brackets.

An example of mounting a standard head unit

Note. The last method of fixation is typical for standard devices, which the car is equipped with by the manufacturer.

Latch on mounting frame

The principle of mounting on latches (latches) is that the body of the radio is enclosed in an iron mounting frame, and not directly integrated into the panel niche. This intermediate part, which has special petals with protrusions or grooves (depending on the brand and model of the device), is securely fixed in a niche. The body of the turntable is equipped with reciprocal latches that engage when the turntable is inserted into the socket.

Reciprocal part of the latch on the body

Keys are used to unlock the latches and remove the car radio. various shapes supplied by the manufacturer complete with music for the car. They are lost over the years of operation of the car, as they are used very rarely. Usually, the key is a figured strip of metal or a pen inserted into 2 pairs of holes located on the front panel of the device.

This is how most of the keys for removing the car radio look like

Fastenings in most cases are made on bolts, bolted to the brackets and hidden under the front plastic panel. Here you can not do without a small set of tools for dismantling this panel and unwinding the fixing screws or bolts.

Key in the form of a handle to release 4 latches

Reference. All of the above tricks with hidden latches and special keys were invented by manufacturers with one goal: to make it very difficult for thieves to steal a car radio when a car is broken into.

Location of keyholes

Removing the device according to the instructions

How to get a radio without keys

It turned out to take out radio tape recorder from the nest, simpler than usual. The main thing is to find with what you can do it.

Quickly and easily remove the radio from the car.

This video shows how to remove radio tape recorder from the regular mounting of the car VAZ Kalina 2. From the standard.

With the help of keys music Center just pull out

How to remove the player - video instruction

How pull out the radio without keys?

If the standard keys are lost, you need to make homemade ones, focusing on the shape of the slots. To see them, remove the removable panel of the device and the plastic frame. Here is a list of funds at hand, with whose help the owners different cars manage to unlock the latches:

thin iron strips 6-15 mm wide;
stationery knives;
plastic clamps for wiring;
carnations and even wire - for round holes;
thin screwdrivers and other similar items that fit the shape of the slots.

Such iron strips can be used instead of keys

Reference. In almost all radio tape recorders, the mounting slots are visible from the outside, therefore it is not necessary to remove the front panel and the plastic frame.

Removed first front panel radio tape recorders

To remove the car radio, use the same method:

Insert into the technological opening, first one, and later the second strip of narrow metal (or a clerical knife, a narrow screwdriver). Feel that any latch is unlocked.
If the turntable is held on by 4 latches, insert four tools.
Slowly pull the radio out of the niche immediately with impromptu keys.

The strips must be stuck into the side slots

Advice. When you use iron strips to open the latches, be sure to wear cloth gloves so as not to cut your hands on sharp edges.

The music center is taken out together with the bands

Video on removing the car radio without keys

Dismantling of the regular music center

Read also

Often, regular head units (they are also radio tape recorders) are removed by the method described above, since they are attached to 2 or 4 latches. For example, the factory player on the Priora is held on by 2 latches, and in order to unlock them, thin steel strips you need to stick between pairs of buttons for switching radio channels "2" - "3" and "5" - "6".

Advice. Before you start disassembling the factory radio, find out about the method of its fastening, so as not to poke pieces of iron at random in this case, if you do not find technological openings.

In Prior, stripes must be inserted between the keys

To remove car radios bolted with screws, you need to prepare the usual set of tools:

narrow flat screwdriver or knife;
a Phillips screwdriver;
a set of heads of small sizes (from 6 to 10 mm).

With this mounting option, the factory player must be unscrewed with heads

On different brands auto regular players can be mounted in different ways, but the principle is approximately the same: the device is screwed to the brackets, which are covered from the outside with a plastic lining. As an example, it is proposed to consider the removal of the radio on the Korean car Hyundai Solaris, performed in the following order:

Pry off the lower corner of the plastic decorative panel framing the music center with a flat screwdriver or a knife. Pull the edge and grab it with your hand.
Gently pull it towards you and release the first latch, and later move in a circle and unlock the others.
Holding the panel with 2 hands, remove it and, if necessary, disconnect the connectors located at the bottom.
Remove the 4 mounting screws with a Phillips screwdriver and remove the radio.

Factory car radio Hyundai Solaris

Advice. When dismantling any player, do not rush to disconnect the battery from the on-board network, since the device will die in 10-15 minutes. may be blocked and the next time you turn it on, require the introduction of a security code that you do not have.

Removal of the standard device on Hyundai Solaris- photo

Decoding problems

The main pitfall of the described procedure lies in the security code embedded in the memory of most radio tape recorders. Essence in the future: disconnecting the music center from the external power supply for 10-15 minutes will lead to the fact that the next time you turn on the car radio, you will be asked to enter a security code (usually four digits), without which it will not work.

Advice. Removing the device to replace it with a new one is not a problem, unless you plan to use the old player on another machine. In any case, try not to disconnect the battery for a long time.

The device asks for a code after connecting to the on-board network

If the card with the code is lost or missing, the issue can be resolved in several ways:

when it comes to a regular device, then for a certain fee they will help to find the code at a dealership selling cars of your brand;
there are offices and individual specialists who specialize in these problems;
free way - search for code by means of different programs.

Serial number location

Regardless of the method chosen, you will have to remove the radio from the socket in order to find out the serial number. It is applied together with a barcode on a tag pasted on the side or top of the case. After pulling out the device, rewrite these numbers, then try to calculate the pin code from them using various online calculators on the web. If it was not possible to find a suitable cipher in this way, then remove the music center and carry it to the specialists in this field and get ready to pay for their services.

Fundamental moment. If the pin code of the radio is unknown to you, then when searching on your own, do not enter the combination of numbers more than 3 times! Otherwise, the device will be blocked, and in this state, its decoding will cost significantly more.

The issue of removing the car radio from the socket is not very difficult and does not require much time. But the consequences can be sudden for an unprepared motorist. Hence the last tip: find the lost pin code before turning off and removing the player in order to save your time and nerves.

VAZ-2101, generator: wiring diagram, repair, replacement In a VAZ 2101 car, the generator is one of the power sources. Second - accumulator battery, but it participates only in starting the engine, the rest of the time it is recharged from the generator. how to remove bottom steering column Yaku steering wheel for Muscovite 412 Izh column. This symbiosis results in...