AVTOGRAN LLC is an authorized installation center of Cerber-M LLC
Installation, warranty and post-warranty repair of anti-theft devices, mechanical anti-theft devices DRAGON
- Gearbox mechanical lock
- Mechanical lock for opening the hood
- Steering shaft mechanical lock
The cost of blockers depends on the brand of the car, the type of gearbox and the complexity of the installation. You can find out the exact cost from the master of the electrical shop.
- DRAGON and why is he?
- Advantages of DRAGON blockers
DRAGON and why is he?
It is known that the problem of car safety and security is relevant both for car owners and for those who are just preparing to buy a car.
At the same time, many car owners pay attention only to electronic car alarms. But it is important to understand at the same time that the car alarm, first of all, performs the function stated in its name - it signals an attempt to break into the car.
The second most important function of electronics for motorists is service. Now no one can do without a small key fob that remotely controls the door and trunk locks, the position of the sunroof and windows, and even remotely starts the engine.
And only if an immobilizer is present in the basic set, the electronic alarm system implements anti-theft functions.
With all this, both the alarm and the immobilizer are the subject of close attention of hijackers. Standard options connecting immobilizers and the operation schemes of most alarms are well known to many electronics lovers, and technically turning them off takes a matter of minutes, and sometimes even seconds.
But do not forget about the most serious and reliable protection car from theft - mechanical.
If earlier it was customary to oppose mechanical anti-theft devices and electronic alarms, now with the advent of Russian automotive market individual blockers DRAGON, it has become generally accepted to talk about protecting a car from theft, based on mechanical anti-theft blockers, which are only supplemented by electronic alarms.
DRAGON mechanical interlocks are the basis for building the most effective protection car from theft.
Purpose of mechanical anti-theft devices DRAGON undeniably, and is to prevent the movement of the car and prevent the physical access of the hijacker to the engine compartment.
DRAGON blockers are available in several types and are designed to block:
gearboxes (any type) and transfer case
steering shaft
bonnetAdvantages of DRAGON blockers
Produced in Russia anti-theft blockers of the brand DRAGON on gearboxes, on the steering shaft and on the hood, are designed and produced for specific brands, models and modifications of cars.
Personality DRAGON
Individuality of DRAGON blockers is their main advantage over other blockers. For each specific model car engineers develop the optimal constructive solution . When developing a new model of the DRAGON anti-theft device the starting point is precisely the design of the car itself. And for their installation, you do not need to saw anything, weld, bend, adjust, look for material, etc.
Moreover, for their fastening it is often not required to drill anything in the car - blocker DRAGON fastened to the "factory", the so-called "regular" places - technological holes and car studs. During operation, they are not involved, and there is no "interference" in the operation of the mechanisms.
Technology of use regular places mounts blockers DRAGON highly rated and approved by automakers, patented and certified by Rostest.
DRAGON - comprehensive anti-theft protection
Based design features each car, is developed individual comprehensive protection from theft, which may consist of two or more blockers DRAGON.
DRAGON - master set
The main advantage of DRAGON blockers is the ability to build a multi-level system to protect the car from theft due to the simultaneous use of several DRAGON anti-theft devices.
By installing two or more blockers, you become the owner of the DRAGON anti-theft Master Kit.
For ease of use, all blockers of the anti-theft complex are controlled by one key.
We all do the usual things we do every day to open and close locks, such as turning a key to open and close a door or start a car. For us, these actions are not difficult. Just as familiar and convenient to use is pinless anti-theft DRAGON device to the gearbox. Locking and unlocking the gearbox mechanism occurs by turning the key.
New pinless DRAGON blocker, developed Russian company"Cerberus-M" is a device designed to block the gearbox control mechanism. Unlike the traditional pin blocker, the novelty does not have a special removable pin, and the blocking element is a non-removable locking bolt.
To lock the gearbox, you must move the lever to the " reverse gear" For mechanical box gears or to the "Parking" position for automatic box gears, then turn the key 180° to activate the locking mechanism of the blocker. Thus, the pinless DRAGON mechanical interlock makes it impossible to shift gears. To unlock the anti-theft device, turn the key 180° to the "open" position.
Blocker design
Pinless mechanical anti-theft device DRAGON developed by engineers of the design bureau of the Cerber-M company, taking into account the highest requirements for protection and reliability.
Its special design allows concealed installation and does not affect passive safety. The new DRAGON pinless device consists of a unique power structure blocker body, locking mechanism of high cryptographic resistance, special system bolt drive, the locking bolt itself and additional protective elements.
Product Benefits
One of the main principles of DRAGON products is non-interference in the design of the car and in the operation of its regular mechanisms. Individual design and unique design of bollards for all car models, provides maximum protection from possible ways burglary and allows you to install the blocker on the factory fasteners. When installing a DRAGON pinless bollard, there is no need to modify the bollard and car elements, which guarantees compliance with one of the basic principles of DRAGON products.
Block body made of high-strength steel, processed by special technology. Its increased geometric rigidity makes it impossible to force break-in attempts.
Blocking bolt is a complex piece. Thanks to modern technology manufacturing, increasing the size and using high-quality metal, the crossbar resists mechanical stress.
Bolt drive system due to optimized geometric characteristics and strengthening of metal strength, it has high protective properties against force impact. This system the crossbar drive is a unique development of the Cerber-M company.
Additional protective elements guaranteed to block access to potentially vulnerable places of the structure and the gearbox control mechanism. They are also made of high-strength steel and resist various forces.
lock mechanism- one of the most important elements in the DRAGON blocker. High level the secrecy of the lock cylinder - more than 3.5 million possible combinations, eliminates attempts to select a key and use master keys. An additional advantage of the locking mechanism is the reduced size of its body. When installed, it looks aesthetically pleasing and harmoniously fits into the interior design. The design of the lock cylinder provides protection against drilling, extrusion and turning.
Ergonomics and aesthetics
Placing the DRAGON bollard within the reach of the driver ensures ease of use. Visible parts of the device are framed decorative elements, which always harmoniously fit into the interior. A wide range of elements allows you to perfectly match desired option to match the interior color of your vehicle.
Thus, pinless device DRAGON has high anti-theft properties and provides convenient and comfortable operation.
Nowadays, almost every new car has regular immobilizers, or alarms. If these devices are not provided, emergency security and anti-theft systems are installed on the vehicle. They can be electronic (car alarms, immobilizers, etc.), electromechanical or mechanical ( different kinds block locks). The latter type also includes such a device as the Dragon checkpoint lock.
Gearbox lock
Mechanical interlock, "for" and "against"
Electronic devices
Many car enthusiasts believe that since a burglar alarm and an immobilizer are installed on a car, it means that no robber is afraid of them. Is it really? What are the main functions of an immobilizer and a car alarm?
An immobilizer is an anti-theft device that prevents (using various electronic interlocks) unauthorized use of a vehicle. With an unidentified, or even without an electronic key "tag card", the car will not even start. His presence in the car is often unnoticed, and he does not give any signals. Only blocking (ignition, starter, sometimes - fuel system). Electronic key works only at a very short distance from the receiver.
Key with electronic filling
Signaling, whether one-way or with feedback, notifies the owner and others about an attempt to break into the car with sound and light signals. They also have the ability to connect an electronic lock. Depending on the type and model, it can receive key fob commands at a fairly large distance.
At first glance, these two devices provide complete and comprehensive protection. vehicle. But nothing is perfect. Every remedy has its weaknesses and vulnerabilities. Professional hijackers know this very well, and bypassing such systems, with modern equipment and the “skill” of criminals, is quite possible.
Components of a car alarm
Therefore, do not ignore mechanical means theft protection. These include blockers. various nodes car. Only a symbiosis of electronic and mechanical devices can give a worthy rebuff to intruders!
Mechanical devices
Installed in conjunction with electronic systems, as well as in their absence. The task of any mechanical blockers is to complicate the process of bypassing car protection by hijackers as much as possible. Hood lock protects important knots engine compartment (using a "spider", CBU from substitution, etc.), gearbox - fixes the gear selector in position reversing"R" (automatic transmission - position "P"), there are pedal locks, brake system, steering shaft...
Standard installation locations for mechanical bollards
The main requirement for such products is high strength, reliability of design, correct installation. Weak sides mechanical locks:
The presence of a lock cylinder (bumping, power cranking, drilling);
Standard installation (some blockers can be bypassed without destroying);
Availability cable drives and pins (biting and sawing);
Not very convenient to use (often you have to open and close).
Despite the "gaps in the defense", quite often the robbers retreat, having found additional protection modules in the car. After all, hacking or bypassing them requires additional time, and for attackers, every second counts.
Gearbox lock
One of the most common methods mechanical protection– blocking of a gear change. The vast majority of such devices are installed in the cabin, in the immediate vicinity of the gearbox selector (automatic transmission).
Installed gear lock
The installation of such locks on automatic gearboxes gives a greater protection effect, since there is no way to depress the clutch pedal and turn off the gearbox.
Dragon gear selector pin lock
Dragon checkpoint blockers are manufactured in Russia by Cerber-M, but they are great for installation not only on domestic cars. Cerber-M LLC is present on the market protective devices and complexes since 2000, and constantly improves its products.
Powerful pin, high secrecy of the lock
The Dragon gearbox pin lock consists of a steel bracket, a locking device with a lock cylinder and a pilot hole, and finally the pin itself, which locks the transmission control selector in the reverse or park position.
Gearbox pin lock kit “Dragon”
Blocker installation
This blocker is installed in the passenger compartment, the area of \u200b\u200bthe gearshift control lever. The lock bracket is attached to the floor of the car with shear bolts, which are also included in the package. On the bracket there is a blocker body with a locking mechanism. Between themselves, they are securely connected over the entire plane by welding.
Installing a blocker in the central tunnel
With proper installation, the pin does not lock the selector itself, but the backstage (gearbox control drive rod). This eliminates the possibility of changing gear by disconnecting the traction in the cabin from the locked control lever.
Correct and incorrect gearbox locks
You can now detach the backstage only in engine compartment, and if additional hood locks are installed, this is a considerable problem. It is possible to destroy the lock by applying brute force or saw through the pin, but this will take a lot of time and effort. Yes, and inconvenient, there is not enough space for such operations.
The conclusion suggests itself that it is necessary to install mechanical interlocks, at least one, in combination with other security devices.
Mechanical bollards
I hereby express my consent to Autoupgrade LLC (OGRN 5117746042090, TIN 7725743662) when placing an Order for a product / service on the website www.site for the purpose of concluding and executing a sales contract, process - collect, record, systematize, accumulate, store, clarify (update, change), extract, use, transfer (including entrusting processing to other persons), depersonalize, block, delete, destroy - my personal data: last name, first name, home and mobile phones, address Email.
I also authorize Autoupgrade LLC to send me informational messages about the products and services of Autoupgrade LLC, as well as about partners.
Consent may be withdrawn by me at any time by sending a written notice to Avtoupgreyd LLC at the address: 115191, Moscow, st. Bolshaya Tulskaya, 10.
Confidentiality of personal information
1. Provision of information by the Client:
1.1. When placing an order for goods/services on the site www.site(hereinafter referred to as the "Website") The Client provides the following information:
Surname, First name, Patronymic of the recipient of the Order of goods/services;
E-mail address;
Contact telephone number;
Delivery address of the Order (at the request of the Client).
1.2. By providing his personal data, the Client agrees to their processing (up to the withdrawal by the Client of his consent to the processing of his personal data) by Autoupgrade LLC (hereinafter referred to as the "Seller"), in order to fulfill the obligations of the Seller and / or its partners to the Client, selling goods and providing services, providing background information, as well as in order to promote goods, works and services, and also agrees to receive informational messages. When processing the Client's personal data, the Seller is guided by the Federal Law "On Personal Data" and local regulations.
1.2.1. If the Client wishes to destroy his personal data if the personal data is incomplete, outdated, inaccurate, or if the Client wishes to withdraw his consent to the processing of personal data or to eliminate illegal actions of Autoupgrade LLC in relation to his personal data, then he must send an official request to the Seller at the address: 115191, Moscow, st. Bolshaya Tulskaya, 10.
1.3. Use of information provided by the Client and received by the Seller.
1.3.1 The Seller uses the data provided by the Client for the following purposes:
processing the Client's Orders and to fulfill its obligations to the Client;
to carry out activities to promote goods and services;
evaluation and analysis of the Site;
determining the winner in promotions held by the Seller;
analysis of the customer's purchasing characteristics and provision personal recommendations;
informing the client about promotions, discounts and special offers through electronic and SMS mailings.
1.3.2. The Seller has the right to send informational messages to the Client. Informational messages are sent to the email address specified during the Order on the Site, as well as via SMS messages and / or push notifications and through the Customer Service to the phone number indicated when placing the Order, about the status of the Order, the goods in the Customer's basket .
2. Provision and transfer of information received by the Seller:
2.1. The Seller undertakes not to transfer the information received from the Client to third parties. It is not considered a violation that the Seller provides information to agents and third parties acting on the basis of an agreement with the Seller in order to fulfill obligations to the Client and only within the framework of agreements. The transfer by the Seller to third parties of data about the Client in an anonymized form for the purpose of evaluating and analyzing the operation of the Site, analyzing the purchasing characteristics of the Client and providing personal recommendations is not considered a violation of this clause.
2.2. It is not considered a violation of obligations to transfer information in accordance with the reasonable and applicable requirements of the legislation of the Russian Federation.
2.3. The Seller receives information about the ip-address of the visitor to the Website www. autobam.ru and information about the link from which website the visitor came from. This information is not used to identify the visitor.
2.4. The Seller is not responsible for the information provided by the Client on the Site in a public form.
2.5. The seller, when processing personal data, takes the necessary and sufficient organizational and technical measures to protect personal data from unauthorized access to them, as well as from other illegal actions in relation to personal data.
Quick order
To order Locks at the checkpoint, please fill in the following data:
DESCRIPTION OF THE DRAGON ANTI-THEFT DEVICE
We all do the usual things we do every day to open and close locks, such as turning a key to open and close a door or start a car. For us, these actions are not difficult. Just as familiar and easy to use is the DRAGON pinless anti-theft device on the gearbox. Locking and unlocking the gearbox mechanism occurs by turning the key.
OPERATING PRINCIPLE OF THE DRAKON GEARBOX LOCK
The DRAGON pinless interlock is a device designed to block the gearbox control mechanism. Unlike the traditional pin blocker, the novelty does not have a special removable pin, and the blocking element is a non-removable locking bolt.
To lock the transmission, it is necessary to move the lever to the "Reverse" position for a manual transmission or to the "Parking" position for an automatic transmission, then turn the key 180 ° to activate the locking mechanism of the blocker. Thus, the pinless DRAGON mechanical interlock makes it impossible to shift gears. To unlock the anti-theft device, turn the key 180° to the "open" position.
TECHNICAL FEATURES OF THE LOCK ON THE CHECKPOINT
Blocker design
The pinless mechanical anti-theft device DRAGON was developed by the engineers of the design bureau of the Cerber-M company, taking into account the highest requirements for protection and reliability.
Its special design allows concealed installation and does not affect passive safety. The new pinless DRAGON device consists of a unique power structure of the blocker body, a locking mechanism of high cryptographic strength, a special bolt drive system, the locking bolt itself and additional protective elements.
Advantages of anti-theft lock
- One of the main principles of DRAGON products is non-interference in the design of the car and in the operation of its regular mechanisms. The individual design and unique design of blockers for all car models provides maximum protection against possible hacking methods and allows you to install the blocker on factory fasteners. When installing a DRAGON pinless bollard, there is no need to modify the bollard and car elements, which guarantees compliance with one of the basic principles of DRAGON products.
- The body of the blocker is made of high-strength steel, processed using a special technology. Its increased geometric rigidity makes it impossible to force break-in attempts.
- The locking bolt is a complex part. Thanks to modern manufacturing technology, increased size and the use of high-quality metal, the bolt resists mechanical stress.
- The crossbar drive system, due to optimized geometric characteristics and increased metal strength, has high protective properties against force.
- Additional protective elements are guaranteed to block access to potentially vulnerable areas of the structure and the gearbox control mechanism. They are also made of high-strength steel and resist various forces.
- The locking mechanism is one of the most important elements in the DRAGON blocker. The high level of secrecy of the lock cylinder - more than 3.5 million possible combinations, eliminates attempts to select a key and use master keys. An additional advantage of the locking mechanism is the reduced size of its body. When installed, it looks aesthetically pleasing and harmoniously fits into the interior design. The design of the lock cylinder provides protection against drilling, extrusion and turning.
Ergonomics and aesthetics
Placing the DRAGON bollard within the reach of the driver ensures ease of use. The visible details of the device are decorated with decorative elements that always harmoniously fit into the interior. A wide range of elements allows you to perfectly match the desired option to the color of your car interior.
Thus, the DRAGON pinless device has high anti-theft properties and provides convenient and comfortable operation.
