Competently and interestingly painted cars visually stand out in the city stream, like cheetahs in the ranks of pigs. If you want to become the owner of such a copy, then we advise you to study this material, and be prepared for the fact that you will have to work hard. The article will list the main ideas for painting a car, the materials needed for this and the advice of professional car painters.
List of materials for painting. What can't be done without?
The appearance of the car is not indifferent to you, and are you ready to spend time and effort to improve it? No matter how you twist it, sooner or later you will have to purchase an airbrush. One of the most versatile tools that can solve a wide range of tasks and is suitable for both a beginner and a professional. Then everything goes in order:
Of course, you will also need a lot of different little things such as masking tape, sandpaper of various grain sizes, brushes and solvents, as well as basic knowledge of auto painting.
Do-it-yourself car painting in two colors
A sharp transition of colors when painting a car
If you chose a geometric pattern of two colors, or stripes, as the main idea for painting a car in two colors, then the transition between the two colors is done as follows:
- A special marking tape is glued along the transition contour, which allows you to perfectly and without wrinkles bypass curved surfaces;
- It is applied to it half the width;
- The covering film is fixed to the tape with ordinary masking tape;
To make it clearer, pay attention to the diagram:
Ideas for painting cars - create a smooth transition of color!
A smooth transition between different colors when painting a car is difficult to implement without significant experience, but there are a few secrets that make everything much easier.
In order to achieve a smooth transition, the paint should be applied in thin layers, with minimal pressure in the spray gun. At the immediate point of transition of one color to another, the paint should be diluted with a solvent by 30-40% and applied again in layers, with an intermediate drying of 10 minutes for. This avoids the formation of drips and visible spatter at the transition. Here is a schematic image similar work black to red transition:
After applying the layers, the result is necessarily fixed.
Painting a car in camouflage with your own hands!
As an idea for painting a car, the choice of camouflage is very interesting - it is suitable not only for a UAZ or a military-style defender. Swap out the colors for more exotic ones and you've got a great option for the city. In addition, its implementation is not as complicated as it might seem at first glance.
Implementation painting works carried out according to the same scheme as when painting a car in two colors. You only need to decide on the texture and choice of gamma:
I would like to warn you - do not try to replace the marking tape with masking tape, as some resources may suggest - tape never allows you to create a clear and even line at the transition of colors, and does not properly protect the lower layers of paint.
Painting a car with liquid rubber with your own hands!
Liquid rubber as an idea for painting a car is a great option, in addition to high visual aesthetics, such a coating provides additional protection for your car from the outside environment.
When applying liquid rubber, proceed in the following order:
- Remove all non-paintable elements (if you seal them with adhesive tape and cover them with a film, as when painting with ordinary enamels, then there will be difficulties later, do not be lazy);
- Degrease the surfaces to be painted with a solvent;
- The coating should be applied with a spray gun from a distance of 15 cm, in three layers, with intermediate drying of each for 60 minutes;
- After applying the last layer, allow the coating to dry for 24 hours;
It should be noted that liquid rubber is a very successful paint material. It is necessary to work with it at low compressor pressure, do not rush and do everything smoothly. Then you will certainly succeed.
Almost everyone can stylishly paint a car with their own hands. What should be considered?
Whatever ideas for painting a car you would not like to implement, be sure to pay attention to the availability of funds personal protection, do not save on the quality of materials, take your time and follow the technological process. The more painstakingly you treat each stage of painting, the better the result will be and the more pleasure it will bring to you personally!
A combination of dark black with bright red, a symbiosis of olive with pastel turquoise or beige and hundreds of others options color combinations… Anyone who is not afraid to experiment can become the owner of a car with an exclusive appearance! And all thanks to the fact that car painting in two colors is available today, which turns even the most nondescript "four-wheeled friend" into an attractive handsome man.
Proper preparation is the key to success
A lot of money was invested, more than one day was spent, and the result did not live up to expectations? The transition between green and white is not as you would like, and the applied paint begins to “please” with barely noticeable cracks? To prevent this from happening, it is important to properly prepare the “experimental” for the procedure.
First of all, all glass, rubber and plastic parts must be sealed if the car is painted in two colors in the assembly. Then the surface is thoroughly cleaned of the old coating, rust, dirt, blown and degreased. Blowing is carried out using ventilation in order to remove all debris, including tiny particles invisible to the eye.
Only after that you can proceed to direct staining. For achievement best effect it should be carried out in special workshops using advanced equipment - compressors, spray guns, grinding tools, infrared or other drying.
Clear Boundary Technique
Black and white, blue and light blue can "meet" on the body in different ways, for example, they can be separated from each other by a clear line. To obtain this effect, the rest of the non-working surface is covered with a special tape or a figured stencil, and the painting itself is performed in a standard way. It is recommended to apply a lighter tone first, then a darker one. To separate the painted parts, a chrome strip laid along the contact line can be used.
The combination of a bright solution (for example, "forest green" or "electric blue") and muted "silver", brown, white or beige will look original. From such a car it exudes formality and at the same time sportiness, rigor and at the same time audacity. Some car owners prefer to combine shades of the same color and get a stylish "modest" that is not like the others. Doubt whether to combine red with pink, and blue with yellow? Do not be afraid to consult with professionals - they will surely dispel all doubts.
Smooth transition
If there is no clear separation of colors, then they gradually approach each other, blending organically. Thus, it is impossible to tell where one shade ends and another begins. To achieve this effect, experts resort to the stencil method with the extension of retouching. This technology is more complex and cannot be applied without the help of professionals. After the main colors are “in place”, two layers of varnish are applied and the final polishing of the surfaces is carried out. Sometimes a third is used. bright color, which helps create fuzzy lines between the other two.
Two-tone cars are far from a novelty of our days. One of the first "swallows" were the GAZ-21 models, which deservedly won the hearts of thousands of drivers. To give a special chic, four various schemes divisions and many combinations. Lemon roof and black bottom, basic blue with the addition of dark blue, cherry-yellow version - the tempting colors of the Volga could not help but attract attention.
As for the choice of tones, it depends mainly on the wishes of the client: some prefer to make the upper part of the car bright, others leave it more neutral and focus on the lower part of the body. And further! It is not recommended to select matching shades by eye: it is better to use
If you want your car to look original and stylish, then there is an easy way for this - painting the car in two colors. If everything is done correctly - and the information presented in this article is intended to help this - then your car will always be in sight, favorably differing from its counterparts.
How to paint a car in several colors: process technology
The most difficult thing in two-tone car painting is creating a contrasting transition from one paint to another. In order to achieve it, the surface, on which the second paint should not be, is carefully covered with a film, after which painting work is carried out. The film after work is removed and thrown away.
If two colors need to be painted small parts, then a powder mass is used for these purposes. It is impossible to paint the entire car body with its use in several colors - overflows will be noticeable, which will spoil the whole impression of painting. In order to avoid this, ordinary enamel should be used at the second level. The easiest way to paint in different colors rims: there the details of the transition are simply impossible to consider.
Smooth and hard transition
Exist different variants car painting in two colors. So, two-tone painting does not always consist of hard lines. Smooth transitions of colors similar in color can give an original effect, however, it should be borne in mind that the cost of an error here will be high (you will have to redo all the work), and therefore this process should be entrusted to experienced craftsmen.
Often, two-tone staining is used, in which the enamel boundary passes along the joints of parts (wings, doors, hood, etc.).
Each of these options is attractive in its own way, and to imagine how it will look in practice, look at painting a car in two colors in the photo above and the video at the end of the article - this will allow you to choose the appropriate option.
Lucky Combinations
In practice, the most common color combinations are:
- blue "electrician";
- silver;
- orange;
- Dark red.
At the same time, we note that the combination of white and black almost never occurs, and brown and lilac colors are sometimes found only in the main transitions. As practice shows, a car painted in one color, but using several tones, or mother-of-pearl paint, makes a strong impression - it always looks fresh and stylish:
If as a result of painting a car you want to give your car a maximum of originality, if it is worth adding a little pigment to the paint. Carefully applied, the pigment layer is able to favorably emphasize the border of the transition, adding attractiveness to the appearance of the car:
Changes in PTS
As far as we know, the car must correspond to the color specified in the TCP by 70%, with significant changes, you need to submit an application to the traffic police, to which the registration of the vehicle is linked.
Have with you:
1. Passport (citizen)
2. PTS
3. Certificate of registration of the vehicle
The fee is 500 rubles.
In the PTS, be sure to check the mark about changing the color of the car.
Car painting in two colors. Click on the photo to enlarge.
Exotic paint on a car is not yet a guarantee of special interest in it from other motorists, but painting, on their own, your car in 2 different, harmonious colors will largely solve the problem of the lack of original features, even without the use of expensive materials. Such a high-quality two-tone painting of your car can get rid of the difficult choice of enamel or become a stylization for racing car. One thing is certain, if a craftsman has some creativity and the right technology to achieve beautiful transitions or hard lines, his creation will be unique and different from other machines.
Technology features and some other nuances
The main difficulty of painting a car in two different colors- this is obtaining a qualitative transition and modifying the surface when applying the second enamel, which should have good hiding power and not flow under the adhesive tape. Therefore, to seal that part of the surface that should not be covered with a second paint, it is recommended to use high-quality adhesive tape, preferably Chinese made with a weak adhesive base.
If a small part is painted in two different colors, only powder paint can be used, the positive point of which is the uniformity of the surface coverage. But painting the body of any car in two different colors with powder paint alone is practically impossible due to the appearance of visible overflows during sintering of the powder, and ordinary car enamel is used as the second paint. Often, combined in harmonious colors, the painting of any car does not necessarily imply a strict border between colors, sometimes a soft transition between paints of similar color looks very impressive. It is very difficult to achieve a high-quality transition and requires some skill, it is easier to use such a two-color one, using paint different colors, painting your personal car, at which the border between colors passes through the joints of different parts of the machine.
Two-tone painting with a smooth transition. Click on the photo to enlarge.
Such painting options can be used to obtain the effect of volume, slightly darkening the surface to be painted at the corners and edges. individual part, but the paint, in this case, must be applied in several layers. In order to emphasize the transition line, instead of changing the color of the paint to darken, add a little pearlescent pigment, which will allow you to get an unusual effect. The most common color combinations in the painting process modern car in two different, harmonious colors - dark red, green, blue, orange. It should be noted that the combination of coloring with a combination of black and white is very rare, and purple and brown are used in painting with a soft transition. It can be very effective two-tone painting using enamel of the same color with different shades.
Necessary tools and materials for painting work
For high-quality painting of the car, we need the following tools and materials:
- Spray gun and compressor;
- Sandpaper ̶ grit P80, P180, P240, P320, P360, P400, P600, P800;
- Solvent;
- masking tape;
- Primer, paint and varnish;
- Priming gun;
- A piece of flannel fabric;
- Container for mixing soil and paintwork materials.
Preparing the room for painting
After preparing all necessary tools and materials for painting, you should start preparing the room where the painting work will be carried out. This is very milestone in the process of painting and the quality directly depends on it end result. The main complication in painting work in garage conditions is the presence of dust.
Although under normal conditions the dust is not very noticeable, but while painting with a jet from a spray gun, your movements can cause an incredible amount of dust, most of which will settle on the painted surface. To prevent this, it is necessary to thoroughly clean the entire room from dust with a vacuum cleaner, wash the floor and remove all unnecessary items that may be a source of dust. Only then can paint work begin.
Removing old paintwork
The paint and varnish coating, before painting the machine in two colors, must be removed and it is recommended to do this using sandpaper P80, P180 on those areas of the surface that were previously covered with putty. Next, you should grind the place of transition of the putty to the metal with finer sandpaper, removing deep scratches from the previous grinding. After the most significant damage, you can start sanding using sandpaper with grit P180 ̶ P320, removing scratches from previous processing. If, initially, there is no significant defects, you can start sanding with medium grit sandpaper and then move on to finer.
When processing small areas or concave surfaces, force should not be applied only to the fingertips, the entire surface of the fingers should act. This achieves a uniform distribution of the load of the abrasive material over the surface of the part. The movements of the hand must be uniform and directed in a straight line: it is impossible to make circular movements. The pressing force on the surface of the part must remain constant throughout the process, and the fingers must be directed at an angle of 90 ° to the line of motion.
All this, for the majority, may be an unusual way of working, but it is precisely this that ensures the quality of processing and excludes the appearance on the surface deep scratches that can be seen through the enamel. It must be remembered that the ultimate goal of processing is to level the surface, and this is done by applying numerous shallow scratches sandpaper.
The puttying process can be skipped, as it is understood that the machine is painted simply to change the color and severe damage that require puttying is not on the surface. Then you need to clean the surface of dust, using for this compressed air. Next, you should degrease the surface using white spirit, you can not use ordinary solvent or gasoline for this.
Priming and grinding the primed surface
Before priming, it is necessary to properly prepare the soil itself. If it is one-component, it is enough to add 20% thinner to it, and in a two-component, in addition, a hardener is also added in strict accordance with the instructions. The hardener and thinner must be from the same manufacturer as the primer, otherwise the quality of the primed surface will be poor.
The primer is applied to the dust-free and degreased surface of the machine in several layers using a primer gun at a pressure of 2 ̶ 4 bar, and the nozzle diameter should be from 1.6 to 2 mm. Each subsequent layer of soil is applied only when the previous one has already become dull.
Soil drying
After that, the primed surface must be dried at a temperature of 20 ° C for about a quarter of an hour, if drying takes place in a special chamber at a temperature of 60 ° C, it is necessary to leave the surface for 10 ̶ 15 minutes before that at a temperature of 20 ° C. For drying, special infrared lamps can be used, but it is necessary to maintain a distance of at least 70 cm from the primed surface to the lamp.
After the primer has dried, carefully inspect the surface and, if scratches, chips, and irregularities are found, use putty to eliminate them. Next, you need to start grinding the primed surface with a grinder using sandpaper P240, P360, P400 if sanding is dry. If sanding with water, it is necessary to use waterproof sandpaper with a grit
P600, P800, after which, the surface must be washed with water and dried thoroughly.For achievement best result when grinding, it is enough to observe next rule: use new sandpaper for the initial processing of the entire available area, and erased ̶ for final sanding. If during grinding the ground completely disappears in places, such areas must be re-primed and sanded. After that, immediately before painting, the surface should be cleaned of dust and degreased.
To distinguish your car from hundreds of others, it is not enough to make it stylish tuning, a new integrated approach is needed here. At the same time, professionals should obviously improve your car. After all, creating an image of a beautiful, expensive, stylish and bright car is not just sticking stickers, tuning and painting in bright colors. It's about how to create an image for a car. And combined car painting is what you need.
Painting a car in two colors: specifics and nuances
Painting a car in two colors is a great opportunity to give the vehicle originality. This option has its advantages:- Profitability. Various options for painting a car in two colors, a harmonious combination of colors will allow not only economical use of paint, but also make the car non-standard.
- Exclusivity Painting a car in two colors is already unusual, bright and noticeable. Your car will definitely be the center of attention.
- Fabulous appearance A properly painted car will not only attract admiring glances, but also qualitatively transform the look of your vehicle.
The paint with which it is planned to paint the car must have good hiding power, its leakage under the adhesive tape is unacceptable. If you need to paint small elements, then it is advisable to use powder paint, it is applied quite evenly. But it is not recommended to completely paint the car only with her, as obvious overflows will be noticeable.
If you darken the edges of elements, corners, you can create a visual effect of volume. There may not be clear boundaries between shades, a smooth transition from one color to another also looks great. But this transition is quite difficult to make, so you need a confident hand of a master who has professional skills.
Painting a car in two colors: tools and materials
Color combinations for cars can be a great variety. It all depends on the wishes of the car owner and his taste. It can be like a bright contrast between dark and light and a smooth transition from one shade to another. Colors for painting cars in two colors are not limited to the standard palette, because there are a lot of colors and shades now. The main thing is not to go to extremes and choose for your " iron horse» stylish and dignified frame. In order to paint a car correctly and without problems, you need knowledge, tools and materials. This may apply to both painting and individual elements.
Materials that will come in handy when giving a new look to your car:
- Compressor,
- Covering materials (film, all kinds of capes, adhesive tape)
- Airbrush,
- Paint, varnishes,
- Solvent
- Priming
- Container for stirring
- Respirator or special mask
- Polishing tools
Car painting: 2 colors or more?
Many car owners who want to make their car creative, bright and leading on the road are wondering: “can I paint the car in several colors?”. Of course, no one forbids this. A matter of taste. But…As a rule, different colors for painting a car (more than two) look ridiculous, pretentious and certainly tasteless. This option is suitable for outrageous car owners.
If your goal is to transform your car, make it newer, more beautiful and original through a combination of colors, then a combination of two colors will be enough. If you are thinking of doing this experiment on your vehicle, then you should not show independence, because the result of the work depends on professionalism, skills and correctly used materials and tools. It is important to comply with all technological process from preparing the car for painting to the final stages, polishing and taking into account other nuances. If you want to be satisfied with the result - contact us!
- it's not a simple matter. Skills for working with various types paints, knowledge of polishing technology, application of the composition and features of enamel are of key importance. The appearance of the machine, the evenness of the surface and the compliance with your expectations depend on them.
