Increasingly, cars with automatic transmission are found on Russian roads. Automatic transmissions are much safer and easier to operate, and modern automatic transmissions are as reliable as mechanical ones. However, the automatic transmission needs timely service and close attention from the owner of the car.
For stable operation timely maintenance, diagnostics and constant control level working fluid in automatic transmission. Oil change in Automatic transmission Hyundai Accent produced after 60,000 km of run. Timely replacement, if necessary with flushing the gearbox, helps prevent serious damage transmission.
Oil change prices in automatic transmission Hyundai Accent (Hyundai Accent)
| Works | Price, rub. | A comment |
| Oil change (your oil) | from 2 000 | excluding cost of consumables |
| Oil change (our oil) | from 1 500 | from 600 rubles per liter of oil (various) |
| Car evacuation | for free | free of charge for repairs |
| Automatic transmission diagnostics | 1 000 | free of charge for repairs |
If you have questions or need advice,
Oil change in automatic transmission Hyundai Accent
Over time, the oil loses its beneficial features and accumulates harmful particles in itself, so the Hyundai Accent is a must. We do not recommend changing the oil on your own, without the participation of professionals, because even this simple procedure has its own subtleties, ignorance of which can harm the gearbox.
During an oil change, specialists pay attention to the condition of the drained working fluid. Used oil may indicate a transmission failure. By changing the oil yourself, you are unlikely to be able to see those nuances that professionals will pay attention to.
The accent can be made partially or completely, the replacement method necessary for your car is determined during visual inspection oils. Oil change price in automatic transmission Hyundai Accent with partial replacement, it is much lower than the cost of a complete replacement of the working fluid.
With a partial replacement, the crankcase protection is removed, the plug is unscrewed from the bottom and the amount of oil that flows out of the box by gravity is drained. The same amount of fresh fluid is poured into the gearbox. The oil level is determined by the dipstick. A partial oil change in an automatic transmission Hyundai Accent is carried out with a slight oil contamination and with a small car mileage.
The procedure for repairing your car in "Automatic Service"
Step 1. After the client's call, the employees select the most convenient time for him to repair the car. If vehicle not on the move, it can be delivered to the service using a tow truck. The car will be brought to the free guarded parking lot of the technical center.
Step 2 In the process of diagnosing and troubleshooting, the causes of the breakdown will be found. Based on this, the price will be set repair work.
Step 3 Car service specialists determine the order of repair, and make a list of necessary spare parts.
Step 4 A preliminary estimate of repair work is being formed. The set amount is agreed with the client. After that, the mechanics begin to carry out repairs.
Step 5 In the process of work, all requirements and recommendations of the manufacturer are taken into account.
Step 6 After completion of work, the car is tested. Thus, the quality of the repair carried out is checked.
Step 7 Service station employees hand over a serviceable car to the client. In the presence of the client, the operation of the vehicle is checked again.
Step 8 All necessary papers are signed. Among them is an act of repair work performed and a warranty card.
Step 9 After a quality repair, the client leaves the car service in his car. Professionals of the technical center guarantee the quality of repair work!
Changing the oil in an automatic transmission Hyundai Accent
Complete replacement is carried out using special equipment, the goal of a complete replacement is to completely displace the used oil and replace it with new. After such an operation, one hundred percent renewal of the oil in the transmission occurs.
Complete oil change in automatic transmission Hyundai Accent reduces fuel consumption, improves dynamics and speed characteristics car. All work on maintenance automatic transmissions are carried out in our service center on the highest level. Our experts perform work quickly and efficiently, while the cost of our services is quite affordable.
The car contains fluids for different purposes, each of which is responsible for the functioning of the system. But over time, liquids exhaust their potential and need quality and timely replacement. One of these ingredients is oil. automatic box shifter Hyundai Accent.
Thanks to the lubricating fluid, the automatic gearbox operates smoothly, making it possible to effectively change the torque. The operation of the transmission directly depends on the quality of the oil poured into it. A significant stage of service is the Hyundai Accent.
[ Hide ]
What oil to use
At the moment there are a large number of all kinds of gear oils. They are distributed according to different classifications and grounds. Not every lubricating fluid is suitable for a particular automatic transmission.
If you study the instruction manual, it becomes clear which oil is the best for automatic transmission Hyundai. The manufacturer strongly recommends the use original fluids for your boxes. These products are called ATF Mitsubishi Diamond SP-III and ATF ZIC SP-III. The automatic transmission manufacturer Hyundai is not responsible for the use of products other than those recommended.
Tools
- pan gasket 45285-22010;
- sealant Hyundai 2145133A02;
- original automatic transmission Hyundai filter;
- funnel;
- part of the fuel hose;
- flat screwdriver;
- key with 17 heads;
- thin wrench for 10 with an extension cord;
- hammer;
- wooden block;
- liquid containers.
Step-by-step instruction
It should be clarified that there is a partial and complete replacement oils in the automatic transmission. The instructions for a complete replacement will be given below.
The whole procedure may seem complicated, but in practice it is very simple, although it takes quite a lot of time. You will need an assistant to make changing the oil easier.
- Replacement begins with the fact that the car needs to be warmed up. It is enough to drive ten kilometers.
- Then place the car strictly in a horizontal position on a flyover or viewing hole.
- Put the car on the handbrake, and move the box selector to neutral gear.
- The gearbox is accessed from the bottom of the vehicle. But the unit itself is covered with a protective plate. It is removed using a thin key for 10 and a flat screwdriver. We unscrew five bolts with a key, and with a screwdriver we pull off a couple of caps.
- After that, it is necessary to unscrew the bolt with a key for 17 drain hole Automatic transmission Hyundai. Before removing the entire cap, prepare the reservoir for drain fluid. Wait until the grease is completely drained. This will take a few minutes. Be prepared for the fact that all the oil contained inside the box is hot, as the car has been warmed up.
- Then you need to remove the pallet of the box. It is fastened with 13 bolts, which are unscrewed with a 10 key. The pan may not be removed immediately due to the sealant. We apply a wooden block to the side of the pallet and hit the block with a hammer, previously supporting the pallet from below.
- We drain the remaining liquid contained in the pan, wash it and erase the old sealant. We also clean the magnets, which contain a layer of metal chips.
- The next step is to remove oil filter Hyundai. The filter also contains oil residue. Using a 10 wrench, unscrew 3 bolts, substitute the fluid reservoir and unscrew the 4th bolt.
- We clean the surface of the crankcase from the hardened sealant and degrease it.
- Installing a new filter.
- Then we put the pallet in place, having previously degreased the surface on which the new sealant or gasket will be applied.
- Before pouring in the new oil that you have chosen, you need to determine how much fluid you have already drained. To do this, for example, you can distribute all the drained liquid into bottles of the same volume or any other accessible method. The approximate volume of liquid should be a little more than 3 liters.
- Pour the same amount of oil into the box. To do this, open the hood, remove the dipstick and use a funnel to fill in the appropriate volume of liquid. Also, the automatic transmission manufacturer recommends adding another 1–1.5 liters of oil additionally.
- The radiator, which cools the automatic transmission fluid, includes 2 hoses: one is responsible for supplying oil, the other for draining. The supply hose enters directly into the radiator, and the drain hose is attached to a thin tube located nearby.
- We remove the drain hose and instead of it tightly fasten the prepared part of the fuel hose to the tube, lower its end into an empty bottle with a volume of, for example, one liter.
- The assistant then starts the engine. We observe how the old oil is poured into the bottle. The engine must be turned off shortly before filling this bottle.
- Pour oil into the dipstick hole with a volume equal to that drained into the bottle. And we repeat the replacement operation until a clean, new liquid flows into the bottle.
- We put the native hose back on the drain tube.
- The replacement of the gearbox lubrication fluid is completed after driving a certain distance on the car in order to “drive” the new oil through the automatic gearbox system.
After "running" the working fluid, we check its level: we take out the dipstick and see what mark the oil reaches. If below "max" - top up, above - drain the liquid.
This completes the replacement process.
Video "Changing the oil in automatic transmission"
How much does it cost to change the oil in a turnkey automatic transmission
*Included in the price: operation, transmission fluid, maintenance kit (filter, gasket)
*The cost may be higher/lower if the customer chooses a different gear oil from those offered. We are the official distributor of: SHELL, Mobile, Motul, Castrol, wolf, United Oil.
*Filter replacement required
The transmission fluids we use
10% discount on oil change for all subscribers:
Prices for consumables (Oil, filter)
Do I need to change the oil in the automatic transmission?
You've probably heard of the term "maintenance-free automatic transmission". Very often, this is guided by many services that do not know how / do not want to change the oil in the transmission. In fact, according to all international rules and regulations, an automatic transmission oil (ATF) and filter change is required every 50,000-60,000 km. In this case, the car owner asks himself the question - "What kind of replacement do I need? Partial or complete?".
Partial or complete oil change in automatic transmission?
Partial replacement (ATF renewal) is carried out without flushing the automatic transmission. To carry out such work, on average, 4-5 liters and half an hour of time are required. The new oil is mixed with the old, and the operation of the box becomes smoother. Many motorists believe that it is better to carry out exclusively full ATF replacement, with flushing the system and expelling the old fluid. We do not pursue the goal of earning as much as possible on our clients, but we warn about possible problems, and we recommend in some cases ONLY partial replacement.
For example, if the car's mileage is more than 100,000 km, and the oil in the box has never been changed, then such a replacement may adversely affect the operation of the automatic transmission, up to its complete failure. In cars with solid mileage, this is due to the fact that with a complete replacement transmission fluid with automatic transmission flushing, various deposits are washed out throughout the system, which clog oil channels, and without normal cooling the box dies pretty quickly. In this case, to maximize the replacement of old oil, 2-3 partial replacement at intervals of 200-300 km. This will certainly not be comparable to a complete ATF replacement, but the percentage of fresh fluid will be 70-75%.
In what cases is a complete ATF replacement carried out?
All of the above problems do not apply to car owners who every 50.000-60.000 km. carried out scheduled replacement transmission oils. In this case, a complete oil change in the automatic transmission allows the box to serve faithfully, and increases its resource by 150-200%.
Change gearbox oil Hyundai car Accent is not a difficult task, and it can be done at home. This is very beneficial, because you will not need to visit an expensive dealership. This is very important, especially if the warranty on the car has ended. Let's take a closer look at how to replace transmission oil on Hyundai example Accent with automatic transmission.
Before purchasing a lubricant, you must follow the recommendations of the manufacturers to select the appropriate product that meets all the tolerance and viscosity parameters specified in the instruction manual. There are many oils available today. affordable price. And yet, it is advisable to purchase a proven lubricant famous brand. So, for the car in question, lubrication would be the most preferable option. ATF Mitsubishi Diamond SP-III or ATF ZIC SP-III.
Replacement materials
- Sealing gasket for gearbox housing, part number 45285-22010
- Hyundai proprietary sealing compound 2145133A02
- Genuine Hyundai oil filter
- Bay funnel new fluid
- fuel hose
- Tool kit including screwdriver, 10 wrench and 17 socket
- Hammer
- Used oil drain tank
Sequence of work for a complete oil change
- It takes a short drive to warm up the engine and gearbox to operating temperature. The liquid will heat up and become thinner and more fluid. Thanks to this, all the used oil will pour out of the box. Thus, it will be possible to avoid complex washing
- After warming up the engine, the car is installed on a flyover, the ignition must be turned off
- Install the car on the observation deck in such a way that there is access to the bottom of the car. To do this, you can use a lift, viewing hole, overpass or jack.
- Turn on the handbrake, transfer the automatic transmission selector to position N (neutral)
- After access to the bottom is provided, you need to go under the car and find the location of the gearbox housing. Most likely, the box will be covered with a protective plate that needs to be removed. This can be done using a 10 head, and you can also use a flat screwdriver. Use the wrench to unscrew the five bolts. Then pull off the two pistons, after which you can remove the protective plate
- After removing the plate, access to the drain plug will open. The plug is unscrewed with a 17 bolt. Please note that after removing the plug, liquid will begin to flow out of the hole into the pan, which must be prepared in advance
- Wait for the grease to drain completely. This will take several minutes. Care must be taken to avoid burns, as heated oil is likely to be hot. It is advisable to wear gloves
- To gain access to the oil filter, you will have to dismantle the gearbox pan, which is held by thirteen bolts. They are unscrewed with a 10 key. It is possible that it is not possible to simply remove the pallet. The fact is that it is fixed not only with bolts, but also with a sealed composition. To loosen it, we apply a wooden block to the side of the pallet, and lightly beat it with a hammer. In this case, the pallet must be supported from below so that it does not suddenly fall. By that time, the waste liquid should already have completely drained from the drain hole.
- The pan must be removed carefully, as oil residues and dirt deposits may remain on it. The pan should be rinsed well, cleaned and degreased, then wiped dry
- Install a new Hyundai oil filter instead of the old one
- Apply a new sealed compound to the pallet, then put new gasket. After that, you can proceed with the installation of a new pallet
- Let's pay attention to how much waste oil spilled out. It is the same amount of new fluid that will have to be introduced into the filler hole. Should be about 3 liters
- New fluid is poured into a special hole located in engine compartment. Before filling, you must first pull out the dipstick and put it aside, then introduce a certain amount of liquid. Perhaps, in addition to the main volume (3 liters), you will have to add an additional 1.5 liters of oil
- Let's pay attention to the radiator responsible for cooling the working fluid inside the transmission. Two hoses are built into this radiator, one of which supplies oil and the other drains. So, the supply hose enters the radiator, and the second (drain) is located next to the first, and is attached to a thin tube. Carefully remove the drain hose, and in its place we put a pre-prepared fuel hose. The end of this hose is lowered into an empty container
- We give the command to the assistant to start the engine, after which we observe the draining of the old oil into an empty container. When it is full, turn off the engine.
- Pour new oil back into the dipstick hole. It is necessary to fill in about 1-1.5 liters - exactly as much as poured into that empty container
- If necessary, repeat the above procedures until clean and transparent oil flows into the bottle.
- We put back the native hose in place (attach to the drain plug)
- Start the engine, take a short trip. Due to this, the oil will “drive” through the entire gearbox and lubricate all transmission parts.
- Drive the car back onto the overpass, turn off the engine and check the fluid level. The fluid may need to be topped up if the level is low. marks Max and Min on the dipstick. On this, the process of changing the oil in the Hyundai Accent automatic transmission has been successfully completed.
Video
The car, like a child, requires special care for itself. If preventive examinations are carried out in time, working fluids are changed, then he will be frisky and active and will be able to overcome any distance without problems. Many novice motorists underestimate the automatic transmission in the Hyundai Accent, ignore the recommendations experienced car owners, inspired by the fact that you do not have to spend cash to make another purchase.
How to choose and change automatic transmission oil in Hyundai Accent.
Unfortunately, such tactics lead to sad consequences. If you do not change the oil on time, the engine has to work harder. Do not be surprised if after some time it simply jams, and even then you have to fork out and pay an impressive amount for repairs.
Change of oil
If you love your car, then arm yourself with our information, go to the store to purchase quality product, providing easy and excellent operation of the engine of your car. If you do not know, best of all, it does not matter, our instructions will be an excellent lifesaver for you, thanks to which you will acquire quality oil and you can also replace it yourself.
Choice
Do not spare the used mixture, drain in time old fluid because it provokes premature wear many working mechanisms of your car. In an auto parts store, you will come across gear oils. However, your task is to find and acquire the best. The duration of the operational life of the automatic transmission depends on what kind of transmission oil we pour. Your car manufacturer strongly recommends purchasing the following types:
- ATF ZIC SP III.
We also confirm high quality such products, we focus on the fact that if someone poured such oil, it means that he is on for a long time forgot about the problems, allowing the automatic transmission to work smoothly and easily.
Conditions for oil change
Of course, it is stupid to change the oil fluid just like that, if the automatic transmission does not need it at all. Well, if you are more or less versed in the technical part of the machine. And if not, there is no need to rush to the service station, throw away finances in order to undergo a diagnosis. You can easily perform all these actions yourself. So, initially you need a gearbox. Initially locate the dipstick to test the appropriate transmission fluid. It is not difficult to distinguish it from another dipstick, since the oil dipstick is yellow.
After that, get into your car and drive it for about 15 km. This allows the transmission to warm up. Next, stop your "Hyundai Accent" and for about three minutes, make it work on Idling. After such preparatory actions Wipe the dipstick to ensure there are no lint on it. Only after that, insert the probe into the tube, hold for about five seconds and remove it again. It remains to carefully look between which marks on the dipstick itself there are oil traces. Please note: the trace of oil must be located between the minimum and maximum mark of the “Hot” zone. So, we believe that now you will not have questions about how to check the level oily liquid, everything is very clear, and it is quite simple to carry out such actions.
If you are interested in the question of how many liters of oil fit in a Hyundai Accent box, we will answer you, preventing you from wasting extra time searching. You will need to pour in 4.5 liters of quality oil.
Self-changing liquid in the machine
Now we will tell you how to change the oil in the Hyundai Accent box. Let's move on to the main steps. Install the handbrake, as well as the neutral gear of the automatic transmission. Detach the box protection located at its bottom.
After that, unscrew the automatic transmission drain bolt, remove the drain channel cover, substitute some container to drain the used oil. Consider one important nuance, the waste liquid has high temperature because you just let the box warm up nicely. Be careful not to burn your hands.
Now unscrew and remove the automatic transmission pan, drain the remaining used oil from it. After draining, thoroughly wipe the pan, magnets, be sure to change the oil filter. And after that, you can proceed to the final stage of your responsible work -. In order not to spill the “precious” liquid, it is better to use a funnel, then not a single drop of oil will spill past.
Take any empty bottle, substitute it to the drain pipe and then start the engine. The remaining fluid from the automatic transmission cooling radiator will merge into a substituted bottle. Let the engine run a little. Then measure the oil level again, top up if necessary. This completes the oil change process.
As you can see, there is nothing difficult when performing such a technical task, so you should not throw money away by driving the car to the service station, it is better to do everything yourself and enjoy your new skills.
