If you think that homemade products are for kids and bored housewives, we will dispel your misconceptions very quickly. This section is completely devoted to the manufacture of homemade products from car parts and rubber tires. Almost anything can be made from car tires. From garden shoes to a full-fledged playground with swings, fairy-tale characters and elements for relaxation. Finally, ever-busy dads will have the opportunity to show their creative talents and create something useful and beautiful in their own backyard or house yard.
Car tires tend to become unusable, especially given the domestic quality of roads and sharp drops temperature. Instead of sending an old tire to a landfill, it can be slightly transformed and donated new life on the playground, in the garden or garden.
We have collected a huge number of examples of how to make car homemade using tires for various household and aesthetic purposes. Perhaps one of the most popular ways to use your used tires is the arrangement of playgrounds. The easiest option is to dig in half a row of tires and decorate their upper part in bright colors. The architectural element created in this way will be used by kids as a device for walking and running with obstacles, as well as instead of “furniture”, because sand products can be laid out on the surface of the tire or even sit by yourself, relaxing on a quiet summer evening.
You can aesthetically diversify the exterior of the site by creating fabulous dragons, funny bears that will meet your guests at the entrance to the courtyard, crocodiles and other animals lurking in the garden with the help of tires. For flower lovers car tire can replace a full-fledged flowerpot, and the plants planted in it will give the yard a well-groomed look.
You can please children by creating a comfortable swing from the most preserved tires. You can leave the shape of the tire in its original form, and, having spent a little more time and effort, create an unusual swing in the form of horses.
Whatever you choose to create a car craft, your children will be delighted to see homemade car crafts in the yard anyway. Inventive kids will be able to play new games and will be sure to be proud of their folder, showing off your creation to their friends. And the mixture of happiness and pride in you in the eyes of a child is perhaps the only thing for which you can step on the throat of a long-awaited day off in the company of a sofa, TV and beer.
We will send the material to you by e-mail
D For the rational use of space, communications and do-it-yourself garage accessories from improvised materials are used. It is necessary to use the walls, the underground level in the process, place it indoors, organize normal lighting.
Homemade garage fixtures
For comfortable operation of the premises intended for storing cars, you should follow certain recommendations:
Storage areas, racks, workbenches
In 80% of cases, do-it-yourself garage fixtures are built to store accessories, tools, and car equipment. It should be noted that the most bulky parts of the car are sets of winter / summer tires, depending on the season.
It is more convenient to store wheels on brackets of the following design:
- two triangular frames from a corner, connected by jumpers from any rolled metal;
- triangles are attached to the wall, the wheels are installed perpendicular to the supporting structure, slightly falling between the jumpers.
The main nuances of these structures are:
The width of the pit should allow the driver to drive into it without lighting.
Lighting and ventilation
Most often used in garages parallel circuits lighting fixtures. One lamp allows you to use a specific area, several devices are turned on during a major repair, a visit to the cellar. The minimum power consumption is provided. Great resource have daylight fixtures.
Cars use poisonous, harmful fuels and lubricants, so do-it-yourself garage ventilation devices are becoming relevant, allowing you to create air exchange. The inflow is organized from below:
- garage - vents in masonry, protected by bars;
- cellar - a pipe from the garage or from the street.
The hood is mounted under the ceiling of the cellar, the roof of the garage or has the form of air vents in the main walls at the highest points.
Related article:
Other Helpful Ideas
Useful gadgets for a garage with their own hands can be made from used utensils, inventory, materials left after the construction. For example, by gluing the lids of plastic jars horizontally / vertically, the owner gets a convenient transparent dish for equipment or hardware, which is always at hand.
Homemade machines
From the power tool, you can also assemble fixtures for the garage:
- drilling - a drill fixed with clamps in a fixture that moves with a gear along a rail;
- cutting - clamped in a similar way with an angle grinder with a tool for metal or wood;
The advantage of the machines is more precise positioning of the tooling relative to the workpiece. The equipment turns out to be collapsible, the drill and angle grinder can be removed mono, used for its intended purpose.
Related article:
Hydropress
The simplest design is obtained from a car hydraulic jack. For pressing out / pressing in bearings, pressing / compressing parts, you will need to build a frame and a removable movable stop. The frame consists of 4 channels welded to each other. At the top, the structure is reinforced with stiffening ribs (kerchiefs), at the bottom, transverse corners are added to give the frame stability.
The emphasis is pulled up in normal position to the upper crossbar of the frame with powerful springs. A hydraulic jack is installed between them, as necessary pressing the stop to the lower crossbar of the frame. The press force is regulated by a jack, dimensions working area are selected depending on the size of the workpieces.
Various homemade products for a car have always been of interest to motorists. They are all designed to improve performance, appearance or comfort. passenger car. For example, you can make a subwoofer, a convenient organizer, headlight eyelashes, license plate protection, etc. with your own hands. We will tell you about some useful homemade products that are available to everyone.
Every motorist strives to make his car unique. This can be done with the help of a kind of overlays on the headlights, which are called cilia and add some zest to the appearance of any car.
To make your own eyelashes, you will need the following:
- building hair dryer;
- thick paper or cardboard;
- primer and paint;
- sandpaper;
- hacksaw;
- scotch;
- plexiglass.
First you need to decide what kind of cilia you want to get. The choice depends on your preferences and imagination. Draw a template on paper or cardboard and cut it out. On it you can cut a piece of plexiglass in the future.
Attach the created template to the headlight of your car and give it a complete look by carefully fitting all the edges. When everything is ready, attach the template to the plexiglass and circle it with a sharp object. According to the resulting contour, the part should be cut out.
In order not to damage the headlights and protect them from scattering, it is better to paste over their surface with adhesive tape. Heat the workpiece with a hair dryer, and when it starts to bend, you can attach it to the headlight.
After that, the surface must be treated with sandpaper, wetting it with water. When everything is dry, paint the part with primer, and then paint in any suitable color. Everything is very easy, and the result can exceed all your expectations.
If on rims your car has scratches or chips that spoil appearance products, you can give the wheels for painting in a specialized workshop. If you do not want to spend money on this, you can try to repair the damaged places yourself.
For work you will need:
- Scratched discs.
- Epoxy glue of any color, as a layer of paint will be applied on top. However, if the paste is too bright, it can show through the paintwork, so it is better to carefully prime everything with a primer before applying the paint.
- Sandpaper number 300-400 and 600.
- Adhesive tape.
- A can of paint and varnish.
First, with the help of coarse-grained sandpaper, it is necessary to clean the places of chips and scratches to such an extent that it was impossible to feel any bumps with your hand. We recommend covering the rubber with adhesive tape and covering it with newspapers so that paint does not get on it.
Mix both components of the epoxy adhesive in a one to one ratio. Apply the composition to the cleaned scratches so that the mixture completely fills them, and a thin layer forms on top.
Dry everything well. This takes a lot of time, and to speed up the process, you can use heat by placing a fan heater or a simple incandescent light bulb near the discs.
When the glue dries, clean it with fine sandpaper, preparing the surface for painting. Everything should be smooth to the touch and look - this is important.
It is not difficult to paint wheels with a spray can. It is necessary to shake the can thoroughly and start spraying paint from a distance of 20-30 cm. Paint should be applied in layers. Avoid too obvious transitions by applying two or three layers. Each of them needs to be dried, waiting for half an hour. To protect fresh paint from dust, it is best to carry out painting work in a pre-moistened room.
After the paint is dry, apply two coats of varnish. Between layers you need to wait for half an hour, and the top layer should be dried longer.
When everything is thoroughly dry, you need to moisten the finest sanding paper (1000-2000 grit) with water and gently smooth the varnished area. To achieve a factory shine, the surface can be polished.
Theft of license plates today has become one of the illegal types of income Money for attackers. It takes thieves no more than 10 seconds to steal numbers from a car. In order not to fall for the bait of scammers, you need to take care of protection registration number. There are several ways, each of which can be implemented independently at home.
Number protection with tape
This method of protecting a license plate from theft may seem ridiculous to you, but it is quite effective. The rear surface of the registration number should be degreased and double-sided adhesive tape should be glued to it. This simple and inexpensive way protection of the number creates an additional obstacle for the thief, which can save your registration plate.
Secrets for car number
Instead of simple screws that fix the license plate, locks are installed. Hats are designed in such a way that you can only unscrew the secrets special key sold with fasteners. The kit costs about 500 rubles, and installation does not take much time.
Factory tools are undoubtedly necessary things, but sometimes do-it-yourself car repair and care tools are in no way inferior to factory ones.
The car needs two types of repairs: quick and long. The first type involves a certain replacement of spare parts - most often, only one needs to be replaced. The second kind, however, suggests a partial or full work for car repair.
There are the following subspecies of car repair:
- Actual. Assumes replacement individual parts only when it is completely out of order, for example, repair of the brake system.
- Planned repair. It is being produced according to the schedule. Most often, it is used in the repair of public or special transport.
- Complete renovation. It is necessary in case of failure of several departments of the car at once, in which it is required complete disassembly and overhaul of all spare parts.
Thus, based on the types of repair, the following methods can be distinguished:
- Individually for every detail. It involves the removal of individual parts, repair and reverse installation. This is the most long view repair - complete. At this type have to wait quite a long time for it to finish.
- Fast way. In this case, the defective parts are removed first, and then the working ones are immediately inserted. This type of repair is called actual. It takes about an hour, during which complete replacement defective spare parts.
- Self repair. It involves the implementation of independent repair actions in relation to your car. It can combine all types of repair at once - depending on the severity of the repair.
With this type of repair, the main rule is to prepare in a timely manner and constantly transport tools and devices for car repair with you.
They can be located in one of two options: in a special box or a special cassette. It is a piece of foam in which a hole is cut.
All other parts are attached to the bottom of the car.
These containers will include the following types of tools:
- Screwdrivers. You must have at least two. Wherein. The best option there will be universal devices in which you can constantly change nozzles. There must also be at least two of them in order to most fully make repairs in several departments of the machine at the same time. Needed, for example, to install the trunk.
- Jack. It must have hydraulics in order to be able to set the desired height for changing a wheel or minor repairs. In addition to it, there are three more varieties: screw - it is designed to replace the wheel by twisting the jack to the required height; rack and pneumatic. It is best to have one of these types. The most popular is screw - it has a small size and ease of transportation.
- Wrench. It is necessary for several types of work. Despite its imperfection when capturing the bolt head, it is able to replace pliers or wire cutters.
- End keys. They have a hexagonal or dodecagonal shape, which are great for unscrewing socket heads. In a suitcase, it is best to keep two types of such keys at once.
- Wrenches. They come in a variety of types, but they are all extremely necessary for urgent car repairs or the installation of a number of accessories. That is why you should have as many of them as possible. This is especially true for a size 13 key, which is needed most often.
- Hammer set. They are light, medium and heavy. The first type is designed for easy repairs by knocking out nuts and bolts. The second type takes over the work with heavier objects. Heavy hammers are needed when repairing doors, changing wheels, and other hard work.
- Pliers and cutters. The former are necessary for unscrewing the wire and other flexible materials, and the wire cutters bite.
- Tow rope. It is required for the transportation and evacuation of the car. It must be strong, absolutely intact and not slip.
This is a whole DIY car repair tool.
Read about repairing cars of all brands. Is it possible to repair the bumper with your own hands? See this article.
improvised devices
As for the devices made by hand, the following points can be noted here:
- Rags. They should be wide and made of dense fabric. The best choice there will be rags or canvas fabrics. They are least prone to chafing and last longer without forming holes. They can wipe excess oil, hands or wipe glass. Should be remembered important rule: If oil appears on a rag, it should be disposed of, as this may lead to ignition.
- Spare parts. In case of replacement of contacts or other parts of the car, the parts that are least worn out can be reused for preliminary repairs with the possibility of arriving at the repair site.
- Additional details. These include a radiator cap, a pump for gasoline, fuses and additional belts. All of them tend to fail at the wrong time. In their presence this situation easy to fix.
- Additional wheel. If you are in a deserted area, only it will help in case of a broken old wheel.
- Cigarette lighter. It is needed to charge the battery from another car.
- First aid kit. It should contain all the necessary medicines and first aid supplies.
- Gloves. They should be woolen with the ability to perform such dirty and difficult work as pulling a car out of a swamp or replacing a dirty wheel.
Such homemade car repair tools will help you cope with car repairs in difficult conditions.
