Road sign 1.15 "Slippery road" carries information for the driver that he is approaching a section of the road that is dangerous due to wet coverage on the roadway and often manifests itself after rain, fog or in winter. The sign warns the driver that he needs to be extremely careful and slow down in advance so that the car does not skid on the road. The road sign is made in the form of a triangle with a red border around the edge. About the fact that it is temporary, says yellow, which shows a car driving along a zigzag road. But this does not mean at all that the road sign is of poor quality. In our company, we pay special attention to the metal from which signs are made. Therefore, we use galvanized steel, which resists harmful effects, such as precipitation and stones flying from under the wheels. Also on road signs, the edges are made by double flanging, which gives them strength, thanks to a special bend of the metal in the joint. It is not enough to make a road sign that would meet the requirements of GOST and the traffic police; it still needs to be reliably strengthened.
To install a road sign, our company offers you to purchase special mounts. This is both ease of installation and the ability to mount two signs with high reliability installation. And most importantly, thanks to high-quality fasteners, the stability of the sign and its resistance to wind loads are ensured. After you have chosen the road sign 1.15 "Slippery Road" you should turn Special attention on the type of film and order exactly the one that is ideal for the road section on which the sign will stand. Your attention is given to 4 types of film, namely: Commercial, Prismatic, High Intensity and Diamond.
They differ not only in their reflective ability, but are also designed for a certain amount of road lanes, and also where exactly the sign will stand: in locality or beyond and to which category the track itself belongs. This road sign is provided in 2 standard sizes. Therefore, you should pay attention to which road: express or trunk. After all, the result of its installation depends on how the order of the road sign is made correctly.
Not a single road sign installed on a highway in our country is put there just like that. Each of them tells the driver what to do in a given situation. Such "explanations" are necessary for the participants traffic quite often, for example, at complex intersections with high traffic intensity. In addition, road signs not only require the driver to strictly compliance with traffic rules, but also often of a warning nature, informing him of a danger ahead or a difficult section of the road.
This is the Slippery road sign. Despite the fact that it belongs to the warning category, it does not always force the driver to discipline the driver and force him to change his aggressive driving style to a calmer one, at least until the dangerous section of the road ends. Very often, such a warning is set in the autumn-winter period at sharp turns, sections of roads with a significant slope, etc. There are also places where the sign slippery road can be installed on a permanent basis - in areas where poultry farms are located, chemical production etc. The video will help you refresh your knowledge about all the warning signs:
Where to look for the slippery road sign
A sign that allows each road user to be informed in advance of what awaits him ahead difficult area road, located on the right side. If the dangerous section of the path is located within the city limits, the Slippery road sign will always be located 50-100 meters before its start, but if it is located outside the city / village, it will be installed at a distance of 150 to 300 meters - such an increased distance is due to the fact , What speed mode movement outside the built-up area is less strict, and the driver needs more time to slow down.
This sign does not have to be memorized in the process of learning at a driving school - its meaning is easy to understand even for those people who have never driven a car. An alarming red triangle is clearly visible on the road in any light. In the central part of the sign there is an unambiguous image of a “waggling” on slippery surface car. Any person will understand the meaning of such a pointer. The Slippery Road sign does not impose any obligations on road users, but any reasonable person, at a minimum, will slow down and become more attentive to the road.
What does the slippery road sign require?
By itself, the installed sign, warning that there is a dangerous section of the road ahead, does not oblige the driver to take any specific action. However, the following driver behavior would be quite logical:
- reduce the speed of the vehicle to 40-60 km / h - it will be less dangerous to overcome slippery area roads;
- professionals recommend taking correct position in the driver's seat, buckle up seat belt if this is not done, place your hands on the steering wheel correctly;
- if the vehicle is equipped with a plug-in all-wheel drive, turn it on, all active assistance systems must be activated.
It should be understood that the road can be slippery and, accordingly, dangerous, not only in winter time. Any precipitation, especially during the off-season, makes the road surface wet and rather slippery. Given the fact that the Slippery road sign is usually installed in front of bridges, sharp turns and the like, the passage of such sections requires sufficient attention, and even light fog can lead to excessive wetting of the roadway. It should be borne in mind that in hot, sunny weather, such areas can become excessively slippery due to bitumen protruding from the surface of the asphalt.
Safety that depends only on the driver
The Slippery road sign does not imply any penalties for the driver, since its installation is for informational purposes only. Nevertheless, every driver must understand that banal care and elementary precautions will help not only overcome a difficult section of the road without consequences for the vehicle itself, but also prevent human casualties.
If there is also oncoming traffic on the section in front of which the Slippery road sign is installed, the situation requires even greater concentration from all drivers. It must be understood that any wrong maneuver on a slippery road in the presence of oncoming traffic can end in a car accident, where human casualties are possible. Therefore, the implementation of the simplest recommendations that do not require any significant efforts from drivers will help to finish the trip without hindrance - both your own and other motorists. The consequences of carelessness on a slippery road can be seen in this video:
Fatigue is another, absolutely unnecessary, companion of the driver.
In addition, driving a vehicle in violation of the regime of work and rest is a serious offense that has an extremely negative impact on road safety.
Imagine that you fell asleep at the wheel ... an accident is guaranteed. But! Let's not talk about the bad.
Long following the endless (and not always ideal!) Russian roads and pretty exhausted, you saw a saving road sign ahead - “Hotel or motel”.
Be aware that this tempting sign with the image of the necessary attribute of the bedroom informs you that the corresponding object is located here. You can relax and take a nap, so that later you can continue your (hopefully pleasant!) journey with renewed vigor.
The rules also provide for the preliminary installation of the “Hotel or Motel” sign. For this purpose, information is applied in the lower field of the sign indicating to the driver the distance that must be traveled to the corresponding object.
In the settlement, this distance will be 100-150 meters. Outside the settlement, this distance will be 400-800 meters (15-20 or 60-80 kilometers).
If a hotel or motel is located away from the road on which traffic is carried out, then another method of preliminary installation of the sign is used to inform about the location of the object in a timely manner.
In the lower field of the sign, in addition to the distance, the direction of movement to the object is also indicated. This version of the “Hotel or Motel” sign is posted at the nearest intersection, where the driver should change the direction of his movement (if, of course, he wants to reach the object of interest to him).
Let's try to summarize. The road sign "Hotel or motel" serves to inform road users about the location of the object of the same name. Pre established signs indicate the distance to this object and the direction of movement towards it.
- hotel which road sign
Warning sign 1.15 outside populated areas is installed at a distance of 150 - 300 m, in populated areas - at a distance of 50 - 100 m before the beginning of the dangerous section. If necessary, the sign can be installed at a different distance, which in this case is indicated on the plate.
- slippery road
- ROAD SIGN CLOUD WITH RAIN
- road sign slippery road
- slippery road sign
Railroad crossing 
goy is an object heightened danger about which the driver must be warned. At more dangerous railway crossings, a barrier and traffic lights are installed. Barriers are not installed at low-traffic crossings, but a traffic light can be used.
Sign 1.2 “Railway crossing without a barrier” warns us about a railway crossing without a barrier, on which a train is depicted. If traffic lights are installed at the crossing, the driver must be guided by them. Stop at traffic lights. If the traffic light allows traffic or it does not exist at all, then you can drive through the crossing.
But before that, you need to remember all the rules for passing railway crossings, make sure that there are no approaching trains from both sides, and only after making sure that traffic is safe, you can pass through the railway crossing.
Road sign 1.2 "Railway crossing without a barrier", like many other warning signs, is installed 50-100 meters before railway crossing in the locality. And outside the settlement, this distance is a little more - 150-300 meters. This is due to the fact that the speed of movement outside the settlement is greater than in the settlement, so you should warn about a dangerous section of the road earlier.
If necessary, signs are installed at a different distance, which is indicated by a sign. In addition, outside the settlement, sign 1.2 is repeated. The second sign is installed at least 50 m before the railway crossing.
If this information was useful to you, please write about it in the comments. If you have any questions, write, we will definitely try to help you.
- borders of the railway crossing traffic rules
- railway crossing with and without barrier online
- railway crossing without barrier
The sign "Indicator of directions" is installed, as a rule, on right side roads. However, the Rules allow its installation on the left side if there are no more than two lanes on the carriageway.
On T-junction the sign may be placed opposite the road that has no continuation, and at the fork in the road - immediately after the fork.
In addition, in conditions of a fairly wide carriageway, if necessary, it is also planned to install duplicate signs - on the left side of the road or on the median strip.
The sign "Indicator of directions" may contain information about the distance to a particular settlement, expressed in kilometers. Agree, a very convenient option.
Finally, don't forget about the magic of the color of the "Direction Indicator" sign. As in the case of signs 6.9.1 and 6.9.2 "Advance direction indicator", the road sign "Direction indicator" additionally informs about the nature of the road on which the driver is or will be driving.
Wherein green color indicates a motorway, blue indicates a road outside the settlement, and white indicates the settlement itself.
Judging by the figure, the movement to the settlement indicated on the sign will be carried out on the road outside the settlement at the appropriate speed, provided for by the requirements of Section 10 of the Rules of the Road.
Thus, the road sign "Indicator of Directions", installed at the intersection (crossroads), informs drivers about the specific direction of movement to various settlements and other objects.
If this information was useful to you, please write about it in the comments. If you have any questions, write, I will definitely try to help you.
- sign 6 10 1
- road sign 6 10 1
Warning sign 1.19 outside settlements is installed at a distance of 150 - 300 m, in settlements - at a distance of 50 - 100 m before the beginning of the dangerous section. If necessary, signs can be installed at a different distance, which in this case is indicated on the plate.
If this information was useful to you, please write about it in the comments. If you have any questions, write, we will definitely try to help you.
- sign 1 19
good grip wheels with the road - this is the key to a confident ride. Even with speeding (which, of course, is illegal).
But quality tires with the required residual tread - this is only part of the safety issue. The driver must also take into account the seasonal quality pavement. And it can be icy, and polluted, and wet.
Agree, icing and pollution of the roadway disciplines the driver much more seriously than humidity. That is why the Rules provide for sign 8.16 - “Wet coating”.
The combination of a sign with a “Wet Surface” sign means that it only has regulatory effect during the period of time when the roadway is wet.
Let's consider a specific example.
Good afternoon, dear reader.
In this article, we will continue our consideration of warning road signs, the first part of which you can find in the article "".
Today we will talk about such signs as crosswalk, be careful children, slippery road, artificial unevenness, The steep climb, steep descent and some others.
I want to remind you that the warning road signs do not impose any requirements on drivers, so their requirements cannot be violated in principle. However, this group of signs informs you that you are approaching dangerous area roads, ignoring which can be very costly for the driver.
steep descent sign
This sign informs that a steep descent will soon appear on the road:
If you come across a steep descent sign on the road, then you should remember paragraph 11.7:
11.7. If the oncoming traffic is difficult, the driver on whose side there is an obstacle must give way. If there is an obstacle on the slopes marked with signs 1.13 and 1.14, the driver of the vehicle moving downhill must give way.
Those. in the event that oncoming traffic is difficult on the road, you will have to give way to oncoming vehicles(moving up).
Steep climb sign
Steep climb sign informs that after 150-300 meters outside the settlement or after 50-100 meters in the settlement the road will go uphill:
With this sign, your car will have an advantage in the event of oncoming traffic.
However, there is one more point of the rules, which is worth remembering when driving on a steep slope. This is point 11.4, which is at the end of the climb. For violation of this paragraph of the rules, the driver will be imposed for 4-6 months. Be careful!
Another feature inherent only in the signs is a steep ascent and a steep descent. These signs can be installed immediately before the start of the ascent or descent, if the ascents and descents follow one after the other.
Slippery road sign
The slippery road sign is installed on sections of the road with increased slipperiness of the carriageway:
In the SDA there are no separate items related to slippery roads.
Rough road sign
The rough road sign is installed on sections of the road, the carriageway of which has various kinds of defects (holes, waves, ruts, etc.):
On uneven sections of the road, the rules do not impose special requirements on drivers, however, as in the case of other warning road signs, you should be especially careful, reducing if necessary.
Artificial roughness sign (speed bump)
Artificial bump sign warns the driver that he will meet the so-called speed bump on the road:
Reduce in this case speed or not, it's up to the driver to decide.
Gravel Ejection Sign
The gravel ejection sign is installed on road sections where crushed stone, gravel and other foreign objects can be ejected from under the wheels of oncoming and passing cars:
Please note that it is not recommended to follow cars with dual rear tires on such sections of the road. Stones get stuck between such tires, which subsequently fall into the windows of cars following them.
Dangerous roadside sign
A dangerous roadside sign is installed on roads where driving to the roadside can be dangerous:
For example, such a sign is installed in the event of a repair work when instead of a shoulder on the road there is a deep pit.
Let me remind you that if according to the traffic rules on the roadway, then you should not count on stopping on a dangerous roadside. You'll have to wait until it ends.
road narrowing sign
The road narrowing sign indicates that soon narrowing of the roadway will occur:
In this case, care should be taken to change lanes in time to the adjacent lane.
Two way traffic sign
A two-way traffic sign warns of the beginning of a section of road with oncoming traffic:
Usually, a two-way traffic sign is installed either at the end of the road with , or on the road with , if this lane ends.
Pedestrian crossing sign
The pedestrian crossing sign warns that the driver will soon meet a pedestrian crossing:
Naturally, they must be marked with the corresponding sign of special regulations or the corresponding .
