https://www.site/2016-11-21/v_rossii_vvedut_novye_gosty_dlya_avtomobilnyh_nomerov

Russia will introduce new GOSTs for license plates

In Russia, new car and motorcycle numbers may appear. As Kommersant writes, the structures of the Ministry of Internal Affairs of the Russian Federation are preparing a review of the existing GOSTs, the development new edition standard is maintained by the Research Center for Security Problems traffic(SIC BDD) Ministry of Internal Affairs of the Russian Federation.

According to the head of the center Oleg Portashnikov, the current GOST-50577 was released back in 1993. The need for its revision is connected with a number of accumulated problems. In particular, most of the motorcycles sold in the Russian Federation are foreign-made. rear number, installed at the factory, is smaller than the Russian sign. In the case when the bike is bought from official dealers, the company provides customers with frame adapters. However, as practice shows, they are not reliable enough. In the new edition of GOST, it is planned to revise the dimensions of the rear motorcycle number plate so that it meets Western standards.

The institute also believes that the standard should be revised for cars. In Russia, there is still a lot of foreign equipment (Japanese, American) with non-standard places for attaching signs. Regular holes on the platforms sometimes do not coincide with the holes on the plates, explains Oleg Portashnikov. The car owner does not have the right to drill additional holes in the license plate, for which a fine of 500 rubles is provided. For the convenience of citizens, according to the SIC, it is possible to allow holes in the room to be made, but in certain places. It is also possible that rectangular rear numbers will appear in the standard for standard mountings of foreign cars.

The Ministry of Internal Affairs is also thinking about adopting Western experience in identifying vintage cars. In some countries, owners of such machines are issued special numbers which give the owner the right to operate vehicle subject to a number of conditions: only on weekends, away from freeways, at a certain distance from the place of residence of the owner, etc. The situation is similar with competition cars. They also need to enter special kind state signs and special conditions of use, the authors of the initiative believe, since sometimes rallies take place on roads common use.

Oleg Portashnikov, head of the Center for Road Safety Problems (SIC RTS) of the Ministry of Internal Affairs of Russia, told Kommersant about the upcoming large-scale reform of automobile and motorcycle registration plates. The former GOST is already outdated, which creates a number of inconveniences for vehicle owners.

This is especially true for motor vehicles, most of which foreign production. The platform for the back number, installed by the manufacturer, is smaller than the Russian sign (245 by 160 mm), as a result, you have to use adapter frames that are not reliable enough and can be torn off by air flow. Many bikers do not use adapters at all when attaching a license plate, but simply bend the edges of the number, which is a violation. The new GOST plans to revise the dimensions of the motorcycle number plate so that it meets Western standards.

The same applies to Japanese and American cars with non-standard places for attaching signs. Regular holes on the platforms sometimes do not coincide with the holes on the numbers, and it is not allowed to drill additional holes in the license plate, this is punishable by a fine of 500 rubles. The standards should be revised to allow holes to be made in certain areas of license plates. The issue of the appearance in the standard of rectangular rear numbers for regular fastenings of a number of foreign cars is also being considered.

For vintage cars, it is proposed, as in some other countries, to issue their own registration numbers. Owners of such cars will have to comply with a number of conditions: drive only on weekends, away from freeways, at a certain distance from the owner’s place of residence, etc. The same applies to cars for competitions, for which certain signs and special conditions of use should also be introduced.

New car numbers have already been developed in the Russian Automobile Federation, and the press service of Rosstandart confirmed that the revision of GOST-50577 is included in the standardization plan for 2017.

License plates for regional traffic police departments are purchased approximately once a year by the Center special purpose in the field of traffic safety of the Ministry of Internal Affairs. The last few tenders (separately for each federal district) took place in the summer of 2016. For example, in the Central Federal District the competition was won by the capital JSC "Znak", and in the North-West Federal District - LLC "Typography No. 2".

“Za rulem.RF” asked if the cargo carriers are experiencing problems with installing license plates? Maxim Bochkov, Purchasing Director transport services FM Logistic, replied that such problems as the impossibility of fixing the state mark on freight transport No. The main thing is to firmly fix the number during installation on the prepared frame and revise it when the car is released on the line. He believes that the innovation will be seen in business as irrational, with additional costs at the expense of vehicle owners. If we further analyze the costs, they may also affect the costs of video recording equipment (equipment setup or replacement), which is already pre-configured to the current state sign standard.

SergeyYanchuk, CEO"Advance-Avto", GC "AutoSpetsCentre": "New cars sold through dealer centers, have standard sizes platforms for numbers. As for the "Japanese" and "Americans" imported by car owners in private, now there are less and less such cars on the roads of Russia. At the same time, you should not forget about them anyway. In my opinion, the introduction of new license plate sizes is a useful initiative, since it will not be necessary to install additional mounts on cars. In addition, the reliability of any additional structures far from 100% and causes risks of losing license plates. The same goes for motorcycles."

• While the city authorities are expanding the zone paid parking in the city, some car owners have found a way not to pay for parking at the building of the Ministry of Internal Affairs of the Russian Federation: they simply rent numbers from cars.
• Last fall, the work of the traffic police department in Zelenograd was paralyzed by resellers, who learned about the arrival of a beautiful series of VOR license plates in the 777th region.

Photo: Stanislav Krasilnikov/TASS

In particular, it is planned to revise the standard for cars imported from Japan and the USA, which has been in force since 1993. Existing regulations GOST standard holes for fastening registration numbers they do not answer in these cars, while making holes on their own can result in a penalty for the car owner in the form of a fine. The new edition will allow you to make holes in certain places. It is possible that new standard will provide for the possibility of installing back plates of a new format, close to the format of motorcycle plates.

Motorcycles can also be affected. Mostly in the Russian Federation they sell foreign motorcycles, on which there is less space for installing a number than the signs that are outstanding in Russia. To solve this problem, motorcyclists are forced to install frame adapters. However, on them strong wind number can be deformed or even come off. As expected, in the new edition of GOST, the dimensions of the rear motorcycle number plate will be revised in order to comply with Western standards.

Innovations may also affect retro car Moreover, the Ministry of Internal Affairs is considering the possibility of using Western experience. We are talking about providing owners of old cars with special numbers. Their installation will make it possible to move on vehicles. However, there will be additional conditions: it will be possible to drive on public roads only on weekends, away from freeways and at a certain distance from the owner’s place of residence. Under certain conditions, numbers will be issued for competitions that take place on public roads.

According to experts, the development of new numbers can significantly simplify the life of motorists, especially residents of the Far East, where there is a large park Japanese cars with informal seats under the license plate. Belarus and other CIS countries have previously taken the path of developing new license plates, experts say. At the same time, in their opinion, the process of modernization of GOST itself will be quite lengthy.

Note that sketches of new license plates have already been submitted to the Ministry of Internal Affairs. They were developed by the Russian Automobile Federation (RAF). Rosstandart, in turn, confirmed that the revision of GOST-50577 is scheduled for 2017. It is planned to start public discussion of the first edition of the standard next autumn, and the final edition should be prepared by May 2018.

The Russian branch of Harley-Davidson welcomed the creation of new numbers, noting that the license plate mounts differ by various models, therefore, it is necessary to solve this problem individually.

Deputy Chairman of the Committee classic cars RAF Petr Shlyakhin also positively assessed the upcoming innovations, noting that the provision of numbers to the owners of vintage cars is a positive thing, since now they pay a full transport tax but can take their cars out onto the roads only a few times a year. As a result, he notes, collectors prefer not to register cars at all.

Finally got to the idiots...

The Ministry of Internal Affairs of Russia is preparing a revision of the existing GOSTs, as a result of which new car and motorcycle numbers may appear in the country, Kommersant writes.

According to Oleg Portashnikov, head of the Research Center for Road Safety Problems (SIC RTS) of the Ministry of Internal Affairs of Russia, the development of a new version of the state standard for license plates is necessary due to a number of accumulated problems. For example, most of the motorcycles sold in Russia are foreign-made, in which the platform for the rear number plate installed at the factory is smaller than the Russian badge. In the new edition of GOST, it is planned to revise the dimensions of the rear motorcycle number plate so that it meets Western standards.

In addition, the SIC believes that GOST should be revised for passenger cars. As noted, in Russia there are still many foreign cars with non-standard places for attaching signs. Regular holes on the platforms sometimes do not match the holes on the numbers. Car owners do not have the right to drill additional holes in the license plate, as this is subject to a fine of 500 rubles. For the convenience of the Russians, the Ministry of Internal Affairs wants to allow holes to be made in the room, but in certain places. It is also possible that rectangular rear numbers will appear in the standard for standard mountings of foreign cars.

In addition, the Ministry of Internal Affairs is considering an option in which it is possible to adopt Western experience in identifying vintage cars. In some countries, owners of such cars are issued special numbers that give the owner the right to operate the vehicle under certain conditions: only on weekends, away from freeways, at a certain distance from the owner’s place of residence, etc. The situation is exactly the same with sports cars. They also need to introduce a special type of state signs and special conditions of use.

Ministry of Internal Affairs is preparing a new standard for Russian license plates

04:03 Artem Filipyonok

The structures of the Ministry of Internal Affairs are preparing to revise the standard for car and motorcycle numbers, which has been in force since 1993
According to the Kommersant newspaper, the Research Center for Road Safety Problems (SIC BDD) of the Ministry of Internal Affairs of Russia is developing a new version of the state standard for license plates. As the head of the center Oleg Portashnikov explained to the publication, the authorities will thereby try to resolve the accumulated problems.

In particular, we are talking about the revision of the standard in force since 1993 for Japanese and american cars. Currently, regular holes for attaching numbers for them do not comply with GOST, and making holes on your own threatens motorists with a fine of 500 rubles. The new edition will allow you to make holes in certain places. It is also possible that rectangular rear numbers will appear in the standard for standard fastenings of foreign cars.

Motorcycles may also be subject to change. Mainly sold in Russia foreign motorcycles, and the platform for the back number is smaller than the domestic sign. As a result, owners have to install frame adapters. However, on them, the number can bend or come off during the wind flow. In the new edition of GOST, it is planned to revise the dimensions of the rear motorcycle number plate so that it meets Western standards.

Read more at RBC.