Reading 7 min.
In our time, Ford Focus 2 is a very popular car. Moreover, at many exhibitions and competitions, this car takes pride of place and continues to be considered quite popular in the CIS countries. But at the same time, it is worth noting that the size of the disks for this car can be different - there is a standard size, and there are those that have already been invented by enthusiasts and just users. What wheel sizes are suitable for Ford Focus 2 should be known to every driver of this car.
For what? For example, you want to buy some new rims for your favorite car, but you don't know the size. In this case, non-standard models can be easily sold to you in various markets, which then simply cannot be returned. Or you decide to simply update your car, in other words, to perform a restyling, in which case you also need to know what to buy. It is also worth noting that some tire sizes that are not designed for the Ford Focus 2 may also fit this car. In any case, what wheel size Ford Focus 2 has is necessary and even extremely important for every owner of this car to know. Although the system there is quite simple, you do not need to sit for a long time and study all the necessary parameters. For this reason, we can safely say that everyone, even a novice driver, can easily perform restyling.
Wheel size information: specifications
It’s worth mentioning right away that there is a set of wheel sizes that are advised by the manufacturer itself. That is, you definitely won’t find it better than what the manufacturer himself offers. There are also wheel sizes that will just fit a second Ford Focus. There are also individual sizes and specific rim models or even rims with tires that will fit the Ford Focus 2.
Factory rim sizes
So, in this case, it is immediately worth noting that there are different sizes of disks. In general, as you know, there are rubbers 195/65-R15 and 205/55-R16 (radius, respectively, 15 and 16 inches). For the first type of tires, the following dimensions are characteristic:
- 6JR15;
- 5×108;
- ET52.5;
- DIA 63.3.
The following models have the second disk sizes:
- 6.5JR16;
- 5×108;
- ET52.5;
- DIA 63.3.
As for how each of these disk sizes stands for, we'll go into that a bit further. In general, it is immediately worth noting that, despite the designations that are a little incomprehensible at first glance, it will be quite easy to determine what size disks can be supplied for your Ford Focus 2.
Non-factory rim sizes
As mentioned above, there are some wheel sizes that are not manufactured by the factory, but they can be easily found and bought at most car markets. This is especially true for specialized online stores that sell parts only for ford focus 2. In addition, they can be purchased on various forums or even on hand. So, these dimensions look like this:
- 6JR15;
- 5×108;
- ET52.5;
- DIA 63.3.
Of course, this tire size is nowhere near as good for the standard Ford Focus 2 wheels. But if you are still at a crossroads - which size to choose - their price will become an argument in favor of these models. Most often, this size of disks will cost much less than standard factory models. Again, this size is perfect for Ford Focus 2 tires.
At the same time, there are no features regarding the installation of tires of this size. You can install them in exactly the same way as regular factory wheel sizes. Of course, in any manipulations with the ford focus 2 there are certain features, including this one. But it certainly will not cause any difficulties, there is no doubt about it.
As you can see, the tire size in the second Ford Focus has certain codes, and it would be useful to figure out how to decipher them. After all, in order to understand what specific dimension you need, you need to know their value. Everything in this respect is extremely simple.
Size chart
So, the dimension of the wheels is deciphered as follows.
- The first number (maybe 6 or 5J) is the width of the rim. In this case, inches are used, not centimeters. This is extremely important to keep in mind when choosing a wheel or wheels in general.
- The second part (R15 or R16) is already the diameter. This value is also measured in inches.
- Further, drilling is indicated - the number of holes intended for fastening the wheels and through the symbol "x" their diameter around the hub hole. For example, 4x107.
- After that, a value called overhang is indicated. It is usually indicated in millimeters (this is extremely important to remember). In the above examples, this value can be seen under the designation "ET52.5".
- Next, you can see the diameter of the hole for the hub. This value is also indicated in millimeters. In the examples that can be seen above, this dimension is indicated, for example, as "DIA63.3".
- Then comes the tire width. There are only two options here - 195 or 205 millimeters. Again, it is important that this value does not change in inches.
- The penultimate value in this cipher is the height of the tire. Here we use inches and not centimeters, but percentages of the width. Also, there are only two options - 55 or 65%.
- Finally, the last value in this code is the landing diameter. Here, again, everything is indicated in inches. Maybe 15 or 16 inches.
In the Ford Focus 2 there is such a thing as reach. This refers to the distance from the platform for fasteners to the longitudinal axis of the disk. This tire parameter can be found very infrequently and the Ford Focus 2 is one of the few such models. The dimension of the disk just affects this parameter.
How to choose the size of the disk?
Of course, there are quite a few such wheels. In some cases, even self-production of the disk is acceptable. The main thing in this case is that the dimensions match. It is also important that all of the above parameters are the same as for factory models. In principle, the truth is that with "properly growing" hands, it is quite possible to make a Ford wheel out of any other. If the dimension of the disk will match, then why not?
There are forged wheels from domestic manufacturers, and there are also alloy wheels (casting) from foreign companies. Which of these is better? It is rather difficult to say because we always give preference to something “overseas” and domestic products did not even receive a full-fledged opportunity to prove themselves. But, based on practice, our VSMPO Orion is not worse than the same ZEPP Bologna. Moreover, the dimension of one and the other disk is completely the same. Moreover, even they all have the same color - “silver”, and in some cases you cannot distinguish two disks standing next to each other from each other.
In this regard, it is also worth remembering that all these types are replicas, that is, to put it simply, copies (“replica” just sounds somehow more formal and interesting from a marketing point of view). That is, they all simply copy the appearance of the official factory edition. As for quality, it’s hard to say for sure which of all this is better - a replica or an original - no one will give a definite answer. Of course, the original has a guarantee from the manufacturer, has all the necessary trademarks and trade marks, there is promotion and high-quality marketing, but will it last longer than a copy? No one will give an unequivocal answer to this question, because no one has tested this parameter, no one has asked the drivers themselves about it. Therefore, look at your wallet condition - if it allows, it is better, of course, to take the original, but some replicas are definitely not worse.
Of course, the big question is how good the copy will be. There are, for example, cast varieties of the rim that will last no more than a year, while others will work correctly for many years and the driver will not even remember this problem. So, according to one testimonial of the driver, the model "SCAD Apogee Selenium" worked for him only a few months, after which the paint began to peel off, terrible scratches and many more various defects became clearly visible. At the same time, a foreign replica, which, by the way, is called REPLICA FD10 silver, served for three years, after which, due to an accident, it simply needed to be replaced. That is, no one will give you a clear answer which tires are better to choose, choose what is more suitable for your wallet. And the sizes are standard, factory, but the replicas have exactly the same parameters, so they will also fit your Ford.
The second generation Ford Focus in Russia has gained extraordinary popularity - a car in good condition still has a good price tag in the secondary market. High build quality, practical interior and acoustic comfort - these are the parameters thanks to which the second Focus has gained a lot of fans. Nevertheless, all the advantages of the model can be nullified by simply installing a set of low-grade rubber ...
How to choose the right tires
ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!
The 2nd generation Ford Focus platform allows you to install tires of a fairly large size, which allows you to independently adjust the handling and height of the car body. From the factory on the Ford Focus can be installed:
- 195/65R15;
- 205/55R16;
- 205/50R17;
- 225/45R17.
Also, the wheelbase suggests the possibility of installing wheels of size 225/40 R18 after minor tuning, which consists in installing autobuffers under the front shock absorbers and arch extensions.
At the same time, for stable controllability of the vehicle, it is necessary to maintain the air pressure recommended by the manufacturer. According to the automaker's regulations, for tires with a radius of R16 and R17, air in the chambers must be pumped up to a mark of 3.1 atmospheres, for R15 rubber - no more than 2.8.
If the rubber is pumped above the recommended mark, the car may grind on the ground or slip on the pavement when driving at high speed. Also, in the event of a sharp temperature drop, for example, when the ramp is heated from the sun's rays, it seriously increases the risk of rubber rupture.
TOP 5 summer tires
When choosing summer tires for a family or personal car, you need to pay attention to handling and acoustic comfort.
For a tenacious grip on the road surface with a tire, the rubber must have a directional tread pattern and channels for removing moisture, for a low noise level, the softness of the outer layer. The most popular options in the Russian Federation that meet these requirements are the following models:
- Rosava Quartum S49 - the main advantages of this model are high directional stability and increased grip in contact with any dry surface. Rubber without problems withstands high speed or sudden temperature changes. The initial cost of tires of this model in the Russian Federation starts from 3,800 rubles;
- Premiorri Solazo - The tread pattern of this rubber provides the proper level of grip on both dry and wet roads. Also, among the pluses of tires, the presence of protection against impacts and cuts is clearly distinguished due to the compaction of the material used to mold the outer layer of rubber - tires have an increased service life. The cost of the model in the Russian Federation starts from 3,500 rubles;
- Aplus A606 - the advantage of the model is the presence of an equidirectional tread pattern and 8 side and front channels for moisture removal. Aplus A606 rubber completely prevents the risk of aquaplaning even when braking hard in a puddle, making it ideal for wet track operation. The initial price of tires on the market is 3,100 rubles;
- Kama Breeze is a budget model of rubber for passenger vehicles, which has side seals and moisture-wicking channels on the sides and working surface of the tire. The average cost of one tire in the Russian market starts from 2,900 rubles;
- Cordiant Road Runner is a popular example that is designed for use on asphalt pavement. Rubber has resistance to rapid abrasion when driving at high speed, and also does not make noise and keeps the car evenly on the track. The cost of 1 tire starts from 2,750 rubles.
This is interesting! Before purchasing rubber, it is imperative to check the product for authenticity - recently, more and more counterfeit products sold under well-known brand names have begun to appear on the Russian market.
TOP 5 winter tires
When choosing tires for the winter, it is necessary to take into account the coefficient of adhesion of the tire to the road surface both on a snowy track and on rolled ice.
Among the popular models of winter tires for Ford Focus in the Russian Federation, the following stand out:
- Sunny SN600 - The symmetrical tread pattern is designed for use on paved surfaces, but the rubber also shows grip on snowy surfaces. The material used in the manufacture of rubber allows you to reach speeds of up to 210 km / h with a load of 750 kg. The cost of a tire starts from 2,700 rubles;
- Belshina ArtMotion Snow is a budget option from a domestic manufacturer. Of the advantages, it is worth highlighting a high coefficient of adhesion, regardless of the type of road surface. Not suitable for dynamic driving, the cost starts from 2,500 rubles;
- Rosava WQ-102 is a studded winter tire that provides directional stability and high acoustic comfort. The directional tread pattern contributes to high handling on the track. Price in the Russian Federation - from 2,300 rubles;
- Premiorri Via Maggiore - the presence of spikes, a directional tread pattern and channels for the removal of moisture provides controllability and a tenacious grip on the surface. An ideal budget option for a couple of seasons, the cost is 1,900 rubles per tire;
- Kama Freeze - the option is popular due to its low cost, but is not suitable for dynamic driving. The main advantage of tires is the good quality of the spikes and resistance to temperature extremes. The cost in the Russian market starts from 1,750 rubles per tire.
Note! It is strictly not recommended to consider used tires for the winter. The lack of information about the actual mileage and storage method does not allow us to assess the real performance of tires - it is quite possible that elite, but used tires may not provide the proper level of grip from the working surface on the track.
How it works and how to turn off the air pressure sensor
The tire pressure display system works on the principle of measuring the force acting from the inside of the tire on a sensor near the rubber nipple. This equipment allows you to monitor the condition of tires in real time, which contributes to safer movement.
On the Ford Focus 2nd generation, the on-board computer menu does not have a function to programmatically disable the pressure control system. If you need to disable the accessory, you will have to dismantle the sensors themselves, located in the nipple area between the tire and the rim, and then turn off the process of monitoring the system in the BC using diagnostic equipment.
Note! In the case of only mechanical dismantling of air pressure sensors on the Ford Focus 2 dashboard, a malfunction check will light up, which, in the presence of related errors, can even disable the possibility of engine ignition. If necessary, turn off the pressure sensors, a rational solution would be to contact a specialized center.
The Ford Focus car, manufactured by the American company Ford Motor, began its history in Russia in the late 90s, and in the next decade gained a huge number of fans.
The second generation of this brand (2005-2011), with its compactness, convenience and reliability, only added credibility to it, and by 2010 the car received the status of the best-selling foreign car in the country, having received the Car of the Year award 2 years later.
Magic tricks flooded the whole country, especially since since 2008 they have been collected from us - in Vsevolozhsk near St. Petersburg. Let's consider in detail which wheels to put on the Ford Focus 2, and start with their parameters.
Wheel parameters
First, let's look at the sizes of wheels and tires that fit the Focus 2, depending on the modification.
The table shows the parameters of the wheels themselves, the seat on the hub is the same everywhere - 63.4 mm.
| Year of manufacture Ford Focus 2 | Modify | Disks | Tire parameters | |||
| Disc width* wheel diameter | Wheel bolt pattern | Departure (ET) | Base | What can replace | ||
| 2005-2010 | 1.4I | 6*15 | — | |||
| 2005-2008 | 1.6I | 5,5*14 | 43,5/47,5 | 185/65 R14 | ||
| 2009-2011 | 1.6I | 6*15 | 52 | 195/65 R15 | — | |
| 2005-2010 | 1.6TDCI | 7*16 | 52 | 205/55 R16 | — | |
| 2005-2010 | 1.6TI | 6*15 | 52 | 195/65 R15 | — | |
| 2005-2010 | 1.8I | 6*15 | 52 | 195/65 R15 | — | |
| 2005 | 1.8TDCI | 7*16 | 52 | — | ||
| 2005-2010 | 2.0i | 7*16 | 52 | — | ||
| 2005-2010 | 2.0TDCI | 7*16 | 52 | — | ||
| 2005-2007 | 2.3I | 6*15 | 4*108 | 52,5 | 195/60 R15 | — |
| 2009-2010 | 2.5 RS | 8,5*19 | 5*108 | 60 | 235/35 R19 | — |
Which nuts on the Ford Focus 2 wheels depends on which wheels will be installed on this machine. If cast or forged, the nut must be closed, as shown in the first photo below. For mounting stamped discs, nuts need short through. The thread pitch in both cases will be M12 * 1.5.
Closed nuts for alloy wheels for Ford Focus 2 For mounting stamped discs, nuts need short through.
Nuts for stamped discs The thread pitch in both cases will be M12 * 1.5.
Wrench nut parameters 19 In order to prevent attackers from removing the wheels from your car, it would be good to buy a set of secret nuts. They are sold in sets of 4 pieces (one for each wheel), plus a special wrench, without which this nut can only be unscrewed at a tire shop.
Security nut kit Note: Sometimes nuts are difficult to remove, and a problem may arise, for example, when you need to put a spare tire.
In this case, before removing the wheel, treat the joints with WD-40 spray, which should be present in the trunk of every car.
original discs
We figured out what sizes of disks for Ford Focus 2 are suitable. Now let's see what the most popular original models for this car can be bought today in stores.
Alcasta M14
ALCASTA M14 It's no secret that the majority of alloy wheels on the Russian market are of Asian origin. So what? In design, they are sometimes not inferior to European models, and the best part is that they are almost half the price.
Alcasta M34
ALCASTA M34 Incredibly beautiful model with nine split spokes and graphite coating. Available in 15-18 radii and different color options.
Alutec Ikenu
Alutec Ikenu The five-pointed star is one of the most popular designs, including for the Ford Focus-2. Model from the German manufacturer Alutec coated with polished graphite in a 17-inch size, it is quite suitable for restyling.
FORD FD105 Replica
FORD FD105 Replica Nice five-petal model with a rich silver finish. These wheels are suitable for Ford of any color. Replika is an Italian brand, but the production is located in Taiwan, from where the casting comes to our country.
Replica FD12
Replica FD12 A well-selling model on the Ford Focus, which is found in various variations from many manufacturers. Coating options can be very different: white silver, black, graphite, matte, polished - you can always choose what you like.
Replica FD22
Replica FD22 An option for those who like multi-spoke models. The manufacturer offers coatings of various types. Which one to choose is up to you. The design is very interesting and looks good in 17 radius and more. Even when the car is stationary, it creates the illusion of movement.
You can save some money by purchasing not casting, but steel stamping. If you do without force majeure on the road, then these discs will last a long time.
steel disc Their disadvantage is the lack of aesthetic effect. It can be compensated by installing decorative caps, but their appearance, of course, cannot be compared with the design of alloy wheels.
The cap masks an unattractive iron disc During the operation of the car, its owner faces many questions related to the choice of rubber. Which winter wheels to choose, which tires can be driven all year round, or how many years can summer tires be used?
Focus Wheel 2 All these questions require detailed answers, and we will try to provide them, covering all the most important criteria.
Seasonality and tread type
People who tend to buy one set of tires and not remove them for a year are the exception rather than the rule.
Most car owners still understand that a seasonal tire change is necessary. What tires are allowed to be used in winter in Russia is specified in the new edition of the technical regulation TR CU 018/2011.
All winter tires have all season tread Some are mistaken in thinking that an all-season, or universal, tire is intended for year-round use. And these terms just denote the type of tread.
Universal - this is an option for summer driving in off-road conditions. A deep pattern, which is called all-weather, makes it possible to well remove snow porridge and dirt from the contact patch.
Such a tread is present on all winter tires, and is also provided for some summer tires. Therefore, if the tire is not positioned as a winter non-studded (friction, Velcro), then it is summer.
At temperatures below +5 +7 degrees, it will harden and lose its properties, slide instead of braking on a wet or icy road.
On a summer tire, an all-season tread is made when it is designed for mud, or in sizes that are used by all-wheel drive SUVs, crossovers, light trucks.
Since Focus 2 is not one of them, a summer tire for it must be taken with a road tread. A directional tread always removes water more efficiently, which reduces the risk of aquaplaning, while an asymmetric tread provides better directional stability on wet roads.
Therefore, for regions where there is a lot of precipitation in summer, and it is more like autumn, this option is preferable.
Tire profile width and height
In general, the car owner does not need to invent anything, because each manufacturer provides several sizes (if possible) to replace wheels and tires.
These data are registered in the passport of the car, and you need to choose from them. Tires with different profile options can be put on a disk with a certain width.
- The width of the tire should match the width of the rim. This is important, as a tire that is narrower than necessary stretches excessively, which raises the risk of spontaneous removal from the rim.
- An overly wide tire forms a kind of ugly "fungus", which should not be either. Small variations of these parameters are allowed, but in everything you need to know when to stop.
- A wider tire is usually put on for the summer, as it has an increased contact area with the road. But with an increase in the width of the tire profile, the probability of planning a car in water also increases. Therefore, narrower tires are usually put on for the winter, which, by the way, makes driving through snowdrifts easier.
Remember also that the wider the profile of the rubber, the heavier it is, which affects driving performance and entails an increase in fuel consumption. In addition, it is also more expensive, so deliberately increasing the width of the profile, if this is not a sports option - Ford Focus II RS, does not make sense.
If the profile width is displayed in millimeters, then the height is displayed as a percentage of the width. The higher the profile, the more comfortable it is to ride, and the more resistant the wheel is to punctures.
But the low profile gives better directional stability and handling, and it looks more interesting on cars. Therefore, many try to put low-profile tires at least for the summer.
In order not to reduce the height of the car as a whole, it is possible to maintain balance when reducing the profile by increasing the diameter of the wheels. That is, if Focus has a profile size of 205/55 in the 16th radius, then in the 17th it will be 205/50. The width is the same, but the profile is lower.
Tire life
How to determine the year of manufacture of a tire by marking - 09 week, 07 year It remains to answer the question of how long tires can be stored from the date of manufacture. According to Russian standards, the manufacturer is obliged to give a five-year warranty for a passenger tire, provided that it is properly used. After this period, he will no longer accept any claims.
For this period, you need to be guided if you buy a domestically produced tire. If at the time of sale it has been in stock for a long time, you will not have a warranty period at your disposal.
Although if the tire has been properly stored and does not have a network of cracks on the surface, it is quite possible to ride on it. In stores, such rubber is usually sold at a markdown.
In Europe, a 10-year warranty is given for a passenger tire, as well as for a truck one. So if it is written on the wheels that they are made in Germany, the Czech Republic, Romania, France, then you can safely take the models that have been in the warehouse for several years.
Just buy five wheels at once for your Ford Focus 2. Manufacturers often change the lineup, and if necessary, after a while to buy one wheel, a problem may arise.
Selection of tires and wheels for the car Ford Focus 2.0 2010 allows you to avoid a lot of problems associated with mistakes made when choosing such products on your own. Most often this is a direct consequence of insufficient attention to their technical parameters, of which they have quite a lot. It is for this reason that it becomes very difficult and often impossible to install a tire and a rim, and in addition, such changes in the vehicle configuration lead to an increased load on the steering and many suspension components. The Mosavtoshina online store uses an automated wheel and tire selection system based on a special database. It contains various technical information about the vast majority of modern cars and trucks. To use this information to search for suitable options, the user just needs to specify the make, model, year of manufacture and modification of his own vehicle.
If you need tires for Ford Focus 2, then you should take into account the season and weather in order to make the right choice. You need to be careful, because the winter and summer options are fundamentally different in diameter, size, quality, characteristics and, of course, price.
It may seem that summer tires on the Ford Focus 2 are not particularly different from winter tires, but this is not so. Summer shoes do not have special spikes used in winter ones.
The purpose of both types is to ensure proper transport management, as well as the safety of its driver.
Depending on the time of year, the tasks facing the rubber also change. For example, in summer rains are of great danger, because of this, a special tread pattern is applied to summer shoes, which improves grip by removing moisture between the tire and the road to the side. 
Protectors have special wide channels through which water is discharged.
Winter tires, on the other hand, do not have this technology, which can cause danger when driving. 
What tires are suitable for Ford Focus 2?
Ford Focus 2 is a widespread model in the CIS countries, and of course, Russia. This means that it will not be difficult to find the necessary spare parts, all kinds of accessories and rubber, as they are in demand. Basically Ford Focus 2 is equipped with 205/50R16 tires, but this size is quite rare, although it will not be difficult to find it, like any other tires for this model. Tire size often ranges from 195/65R15 to 205/55R1 models.
Toyo Proxes PX4 Plus
It is also worth considering that the quality of auto shoes depends on the company. It is recommended to use tires from Toyo, Yokohama, Goodyer, Kumho, Gislaved, Bridgestone. Dunpol or Nokian. These are firms with many years of experience behind them and a large number of good reviews. All of them will provide you with good grip and high performance even in heavy rains and other unfavorable weather. Many types of tires, for example, Toyo Proxes PX4 Plus summer tires, can also be used in winter, all this is an achievement of high-class engineers of the company.
For the Ford Focus, there is a huge selection of tires, including silent and demi-season. It remains only for you to make the best choice, focusing on price, quality, characteristics and design of products.
