Hyundai Kia Service is perfect choice for owners Korean stamps, this is the place where you can count on professional repair from experts in their field! It is no secret that these two brands belong to the same concern and therefore, the specialization of our car service allows us to serve both brands with equal success at a high professional and technical level.
Our car service Maintenance and repair of all models from the line Korean cars manufacturers reliably, efficiently and quickly!
List of basic services:
Working with these machines for many years, the masters of the technical center have gained a lot of experience. It is our rich experience that allows us to service and repair the highest quality and quickly!
As a post-warranty technical center, Hyundai Kia Service offers its customers a wide range of spare parts for Korean cars. We have not only original spare parts, but also more accessible and quality analogues from other manufacturers. Thanks to this, the car can be repaired on the same day of treatment.
Concerning technical equipment, the technical center has complete set modern dealer equipment for the maintenance of Korean cars.
So that our customers can comfortably wait until the masters carry out necessary work or TO, we have equipped a special area for relaxation. It is equipped with free internet connection, coffee machine and snack bar. For the convenience of customers, we have introduced the possibility of paying by credit card.
Guarded parking is also available to visitors. If necessary, our masters - consultants will give a detailed consultation, help you choose accessories and consumables.
Among the advantages of our technical center:
- Detailed expert opinions and professional recommendations.
- Democratic prices for all types of work, and the cost of basic services is fixed.
- We start work only after full coordination of all details with the customer.
- We carry out all work as quickly and efficiently as possible.
Hyundai Kia Service is an ideal choice for those who value, above all, responsibility, reliability and high quality works. Our service is for those who know the value of an honest approach and openness, who know how to count money and value their time.
We are always glad to those who have already appreciated us and will be glad to those who are just going to visit us. Owners Korean cars they know about us firsthand and recommend the technical center to their relatives and friends.
We offer all owners of Kia or Hyundai cars to personally evaluate all the benefits of servicing with us.
Often kia cerate clutch replacement performed when the system is completely out of service. At the same time, simple repair work unable to completely eliminate the problem and prevent the possibility of repeated breakdown. Qualified Replacement Kia clutch Cerato's without fail must be carried out under conditions service center. In our workshop you will find a whole complex quality services from real professionals:
- Checking the status of all elements of the system.
- Identification of problem areas.
- Selection of components requiring urgent replacement.
- Carrying out repairs in accordance with regulations.
- Maintenance and post-warranty service.
The key to a competent repair is the diagnosis of the Kia Cerato clutch, which requires specialized equipment and a thorough visual inspection. To eliminate some malfunctions, it is not at all necessary to replace the entire assembly, a simple clutch repair can help. Kia Cerato. In this case, it is important to correctly identify the problem and choose options to fix it. In particular, if the pedal or lever travel is disturbed, you can try to make an adjustment that will restore maneuverability and improve vehicle controllability.
Professional clutch replacement Kia Cerato allows you to perform all work at a high quality level and in accordance with service standards. The services of this operation are addressed in cases where the usual repair of the Kia Cerato clutch is not able to eliminate all problems and it is easier to install new node than fixing a lot of bugs in the old system.
To prevent major breakdowns, each driver must be extremely attentive to his car and immediately respond to deviations from normal operation. In particular, Kia Cerato clutch replacement may be required if the following symptoms appear: pedal shortening, knocking, jerking and noise when shifting gears, as well as complete failure systems from work. If one or more signs appear, you should immediately contact a mechanic for inspection and diagnostics, during which a decision will be made on certain repairs.
Clutch replacement for Kia Cerato 2.0 / 175 hp takes 3 to 8 hours. Kia Cerato 2.0 / 175 hp clutch replacement only done with removal/installation gearboxes. On some models, to remove the box, you need to remove the subframe. Determine what exactly to change: disk, basket or release bearing, best after the box is removed.
The decision to replace the clutch on Kia Cerato 2.0 / 175 hp must be taken after diagnosis in a car service. Some of the symptoms may look like a faulty transmission or shift mechanism. On robotic boxes(robot, easytronic, etc.), after replacing the clutch, it is necessary to adapt the setting point. This can be done at our stations.
The cost of replacing the clutch on the Kia cerate 2.0 / 175 hp:
If you notice that the clutch starts to behave differently than before, we recommend that you immediately contact a car service for diagnostics. If you start this moment, then later, in addition to replacing the clutch with a Kia cerate 2.0 / 175 hp, you will also have to replace the flywheel. And the cost of the flywheel is several times higher than the cost of the clutch kit.
When replacing the clutch, we also recommend replacing the crankshaft rear oil seal and replacing the axle oil seals. When replacing the clutch, a good mechanic will always pay attention to the condition of the gear selector shaft seal as well. The cost of oil seals is minimal and it is better to do everything at once, without overpaying for the same work in the future.
The cost of replacing the clutch Kia cerate 2.0 / 175 hp depends on the need to remove the subframe and remove the box. It happens that people try to replace the clutch on their own, nothing comes out of them and they bring a semi-disassembled car to us.
The main symptoms of a bad clutch are:
- increased noise when engaging and disengaging the clutch;
- incomplete engagement of the clutch (clutch "slips");
- incomplete disengagement of the clutch (clutch "leads");
- jerks during clutch operation.
Clutch replacement warranty- 180 days.
The best clutch kits release : LUK, SACHS, AISIN, VALEO.
Clutch diagnostics when replacing at our service station - free of charge!
78 79 ..Kia Cerato. REMOVING AND INSTALLING THE CLUTCH
The main malfunctions, the elimination of which requires the removal and disassembly of the clutch:
Increased (compared to the usual) noise when the clutch is engaged;
Jerks during clutch operation;
Incomplete engagement of the clutch (clutch "slips");
Incomplete disengagement of the clutch (clutch "leads"),
HELPFUL ADVICE
If the clutch fails, we recommend replacing all its elements at the same time (driven and pressure plates, clutch release bearing): the work of replacing the clutch is laborious, and the life of undamaged clutch elements has already been reduced, therefore, if they are installed again, it may be necessary to replace the clutch again after relatively low mileage.
You will need: a “12” wrench (a socket head is more convenient), a mounting blade, a mandrel for centering the driven disk.
1. Remove the gearbox (see "Removing and installing the gearbox", page 134).
2. If you install the old pressure plate, mark in any way (for example, with paint) the relative position of the disc casing and the flywheel in order to set the pressure plate in its original position (to maintain balance).
3. Holding the flywheel with a mounting spatula (or a large screwdriver) from turning, unscrew the six bolts securing the clutch pressure plate casing to the flywheel (for clarity, the photo was taken on the removed engine). Loosen the bolts evenly: each bolt has two turns of the wrench, moving from bolt to bolt in diameter.
NOTE
4. Remove the pressure and driven from the flywheel clutch discs while holding the driven disk.
5. Examine a conducted disk of coupling. Cracks on the details of the driven disk are not allowed.
7. If the rivet heads are recessed less than 0.3 mm, the surface friction linings rivet connections are oily or loose, the driven disk must be replaced.
NOTE
If the lining of the driven disk is oily, then the cause may be wear on the gearbox input shaft oil seal. It may need to be replaced.
|
|
8. Check up reliability of fixing of damper springs in sockets of a nave of a conducted disk, trying to move them in sockets of a nave by a hand. If the springs move easily in their seats or are broken, replace the disc.
9. Check up runout of a conducted disk if at visual inspection warping was found. If the runout is greater than 0.5 mm, replace the disc.
|
|
10. Inspect the working friction surfaces of the flywheel ...
13. External examination evaluate the condition of the pressure plate diaphragm spring. The presence of cracks on the diaphragm spring is not allowed. Places A of contact between the petals of the spring and the clutch release bearing must be in the same plane and not have obvious signs of wear (wear should not exceed 0.8 mm). Otherwise, replace the pressure plate assembly.
18. Apply high-melting grease to the splines of the driven disc hub.
19. When mounting the clutch, first install the driven disk using a mandrel, and then the pressure plate casing, aligning the marks made before removing it, and screw in the casing-to-flywheel mounting bolts.
Close page 11.05.2018
Experienced car owners I love at least once in my life faced with the replacement of the clutch. And they know that in this case, the preparation takes more time than the replacement itself. Today we will replace Kia car cerate.
The whole process consists of several stages:
-
Specialist. reportage site
What are the risks of driving with an expired driver's license?
- 12.05.2019
- Removing the gearbox
- Oil drain
- Removal of drive shafts
- Replacement of the entire clutch kit (disk, clutch basket and thrust bearing)
All this will take a day. Stock up on patience.
In order to get started, you need to prepare and acquire:
New quality clutch kit
basket Hyundai clutch 41300 26010;
clutch disc Kia 41100 26010;
clutch release Hyundai bearing 41421 32000.
The total cost will be approximately 7,000 rubles. As you can see, the amount is already rather big, so there is no need to spend extra on the service (and this, for a second, is another 5000-6000 rubles).
To all this amount, add a new canister of oil, which we recommend replacing along the way.
As you can see, replacing the clutch is not a budgetary procedure, so arm yourself detailed video instruction, all the necessary tools and new spare parts and forward.
Good luck in your work!
Report a bug
Select it and press Ctrl + Enter
Rolls-Royce is not only a car. This is a work of art. After all, all components are handmade by high-level craftsmen.
And the car itself is designed to emphasize the individual style of its owner and his selective and sophisticated taste. For this reason, not only the car itself, but also all accessories for it are incredibly elegant, technical excellence and high price, writes 1gai.ru.
Accessory priced at bmw. Not so long ago, the automobile concern Rolls-Royce presented to the world community a new accessory - a picnic chest with champagne, the price of which shocked many - $ 48,000. For such an amount, from the equally famous BMW automaker, you can buy a solidly packed BMW 330i SE or BMW 520i SE car.
Authors. The picnic chest was created by cabinetmakers from the English company Tudor Oak, who made a wooden table with laser inlay from alloy steel, which is not subject to corrosion.
The complete package, as well as the idea of this art object, was implemented by specialists from the Bespoke Design design studio under the direction of Gavin Harley.
The transforming chest is made of carbon fiber and machined aluminum. Leather trim with Spirit of Ecstasy embossing. At the push of a button, the picnic device pops open and transforms into something “totally incredible,” as Gavin Harley describes the moment.
Design. The design of the trunk is reminiscent of a V12 engine. In any case, the creators of this exquisite device assure. Long elegant crystal champagne glasses are placed in polished aluminum containers.
Under the side tanks are two mini-fridges made of carbon and black anodized aluminum to cool the champagne. Top cover, sliding back, opens several china plates for light snacks and a caviar bowl with a pair of mother-of-pearl spoons. All this is accompanied by subdued lighting, emphasizing the reliefs of the chest and its contents.
The developers themselves believe that the new device is suitable for a chamber party on a yacht, or on the terrace of a private residence.
A significant event took place the day before. The first day of the second stage Russian series circuit racing.
The event was held at the NRing circuit, which is located near Nizhny Novgorod. From the first seconds it was clear that a lot of people were expected, because after 10 minutes of the start of the event, the parking lot near the ring was full. Those who did not have time had to leave vehicle at the entrance to the race track.
For the guests of the event, the organizers prepared several zones: a food court, a zone where the host held his show program, as well as a platform directly with racing teams and partners of the SMP RSKG. After, the guests went to the stands, in total three were allotted so that the fans could choose the best place to watch circuit races.
The first to open the event was the class race S1600 Junior. 13 people took part in it, but only 12 riders reached the race itself, because Nikita Dubinin's car was damaged, namely, the windshield cracked in it. After that, the driver had to park the car in the pits.
According to the results of the race, Rustam Fatkhutdinov turned out to be the best, who not only showed best time, but also reached the finish line. The rider is a member of the AG Team, he was driving a Volkswagen Polo. Pyotr Plotnikov, a rider of the Rally Academy, took the second place, and Dzhabrail Akhmadov, who belongs to the AKHMAT Racing Team, took the bronze. Last place after Ilya Doshchechkin got it due to the fact that Jabrail did not have time to get to the podium in time.
Next, they announced the start of the class S1600. 17 people took part in the race, but only 16 reached the finish line. The thing is that the racer Vladimir Shesheshnin "Sport ROSNEFT" retired from the race due to the fact that his Lada Granta had a motor failure. The first in this race was Pavel Kuzminov, the second was Mikhail Mityaev, and the third place was awarded to Ruslan Nafikov.
This was followed by a break. Those who became owners of Premium tickets were lucky, they could ride a drift taxi. Also, many took autographs from their favorite pilots.
Then the guests settled down again in their places and prepared to watch the next races. "Super Production" And "Touring Light". 9 racers participated in the first race. The first place went to Vadim Antipov. Andrei Petukhov took the second place and Dmitry Lebedev took the bronze medal.
IN Touring Light 8 cars started. Vladimir Cherevan was able to win "gold", the second place was taken by Vladimir Udalenkov. And the third rider who entered the top three was Yefim Gatmakher.
The next ride was SMP Formula 4. Many pinned big hopes to Irina Sidorkova, who last year became the winner in this race. But she took only 6th place out of 10 admitted. The first place was taken by Artyom Lobanenko, the second place was taken by Pavel Bulantsev and the "bronze" was awarded to Alexei Nesov.
Completed the first day of the race of the premier class SMP RSKG - Turinga. 20 cars participated in it, but not all of them could reach the finish line. Already at the first corner of the Audi RS3 in which Irek Minnakhmetov was driving, he collided with Pavel Yashin's Cupra TCR. Just seconds later, Mikhail Grachev got here on Lada Vesta and Alexey Dudukalo on the Audi RS3. According to the results of the race, Klim Gavrilov, who drove an Audi RS3, became the first, Ivan Lukashevich got the second place on the Hyunday i30, and the third place was given to Kirill Ladygin, who participated in the race on the Lada Vesta.
On the first day, the participants of the drift series SMP RCRS Open Drift Cup decided with whom they would participate in the Sunday race.
Those who purchased a ticket for the first day have the right to visit the second. Just like on the first day of the event, entertainment zones will operate for guests and, of course, they will be able to watch 5 circuit races.
In total, 77 pilots participated on the first day, and more than 6,000 spectators came to watch the races.
Automobile companies still only bring their electric vehicles to the level of industrial production.
Companies seek to increase the margin of autonomy of cars to an acceptable level, to reduce the cost of models. At the same time, many firms are working in parallel on a design using hydrogen as an energy source.
Contradictions and prerequisites for the development of hydrogen fuel cell vehicles
It is believed that hydrogen (H), as the first element in the periodic table, is an inexhaustible source of energy. When using it, there is no harm to the environment, since water is formed in small quantities at the outlet. In comparison, the production of electric vehicles is costly, given the creation of high-capacity batteries that have a limited lifespan.
According to a possible concept, cars on hydrogen fuel can be created in two ways:
- With the use of the basis of the engine internal combustion. In this case, hydrogen is used as a fuel for combustion and energy production in the traditional way.
- With the creation of hydrogen fuel cells. This concept involves getting electric current to power the electric motor on the drive wheels.
In the first case, the danger of storing hydrogen in a tank is associated with high pressure. The substance is stored in a liquid state, with a "P" value of 700 bar. The first task of the manufacturer is to maintain the tightness of the tank in any conditions. After all, when hydrogen interacts with air (or oxygen), an uncontrolled combustion process occurs (explosive gas is formed).
