During the operation of personal vehicle after a certain time, many of its elements wear out, including the wiper blades. The value of this device is difficult to overestimate. Thanks to him, the driver has the opportunity to keep the windshield and rear window clean while driving in bad, rainy weather.
Why brushes wear out
Timely use of wipers provides good visibility and minimizes the occurrence of any incidents on the road. In this regard, the condition of the wiper blades must be monitored. If they no longer perform their functions properly, they need to be replaced.
Consider the process of replacing wiper blades on the example of a VAZ car. Most likely, many car owners domestic production have noticed that the rear wiper blade becomes unusable faster than the front wiper blades. That is why we will talk first of all about how to remove back brush wiper.
Explain about rapid wear rear wiper blade is possible because sand and other impurities in the form of microparticles and fuels and lubricants they are lifted by the wheels of the car from the road surface, and during precipitation, due to the aerodynamic characteristics of the body, they are deposited mainly on its rear part.
Windshield wiper blade replacement process
You don't need a lot of tools to replace a worn windshield wiper blade. It is enough to arm yourself with the ignition key and proceed with the following steps:
- Despite the fact that visually mounting the rear brush is no different from mounting the front ones, its dismantling can cause some difficulties for those who have never encountered replacing the rear wiper. The point is that the removal regular place rear wiper blade only occurs when its holder is at a 45-degree angle relative to the horizon.
- To dismantle the worn rubber band of the rear wiper, which has ceased to fully cope with cleaning the glass, you must first turn on the wiper drive, after which, by starting the ignition system and deactivating it by turning the key, you need to set the brush to the desired position.
- As soon as this has been achieved, the brush is dismantled by simply pressing a special locking latch.
If you notice that the rear window of your car is not sufficiently cleaned of dust and dirt adhering to it during rain, we can conclude that the wiper rubber is worn out and that is why it has ceased to cope with its functions. It should be noted that the continued use of such wiper blades delivers when driving personal transport some discomfort, especially in bad weather with heavy precipitation. When driving a car, due to the limited visibility, the level of safety is reduced, so you need to be extremely careful while driving, and it is better to replace the worn rubber elements of the wipers as soon as possible.
The rubber element of the wipers is considered consumable for cars, you can find it at any auto parts store.
And there will be no need to buy it to order, because such parts are always in stock. Do not forget that good visibility of the car increases the likelihood that the driver in emergency will be able to react in time by pressing the brake pedal or making the necessary maneuver.
Photo
See how to replace a worn wiper blade rubber:
Every car owner knows that the windshield wiper blade is an important and indispensable part of any car. The safety of the driver and passengers to some extent depends on the quality of this product. So, in order to minimize the risk of getting into a traffic accident, you need to carefully clean the windows of the car.
Why are car wipers needed?
Wiper blades have one more vernacular name- "janitors". With their help, the driver of the car has the ability to control his vehicle in any weather. Replacing the wiper blades will be discussed below. Almost every driver has experienced driving problems in rainy weather. Especially if the meeting high speed a car is driving, splashing mud on your windows. In order to clearly see the road, scientists have developed car "wipers".
Replacement indicator
To date modern models"Wipers" are equipped with a special mark that allows you to determine when the replacement of the wiper blades is needed. Most often, such products have a special mark in the form of a square or a circle on the body of the model itself. Usually it is applied with a special paint, therefore, when installing such a cleaner, first remove the protective film from it.
As a result of exposure to ultraviolet radiation and bad weather conditions the paint will change its color, which will indicate the need to replace the wiper. In this case, such an indicator will not respond to mechanical damage and cleaning fluids.
Signs of worn wiper blades
Special signs will help you understand if the windshield wiper blades need to be replaced. Pay attention to such points:
- during cleaning, stripes and dirty stains appear on the glass;
- large untreated areas;
- the appearance of vertical and narrow stripes on the glasses.
Replacing the wiper blades on your own is fairly quick. Many car owners are afraid of breaking something, and very much in vain. In fact, removing and replacing the wipers yourself is very simple. All you need is a little free time and a minimum amount of knowledge and skills.
Windshield wiper blade replacement involves the removal of old products and the installation of new ones. Very important rule replacements - the purchase of a product model that is ideal for your car. After all, very often different "wipers" differ in length. Be sure to consider this option when buying.
Step by step replacement instructions
To replace the "wipers" you should follow these steps:
- The lever is placed vertically, after which it is removed from the glass itself. Do it very carefully. After all, if it pops out, then there is a risk of breaking machine glass.
- After the first step, open the plug by pulling the brush down. Remember to hold the holder very firmly during this operation.
- Now take a pre-prepared new product and put it on the knitting needle, while closing the plug itself. Try to straighten it as much as possible by pulling it down.
That's all, new brush windshield wiper is installed, so you can safely drive a car and not worry about poor visibility.
Replacing the rear wiper blade
There are car models for which it is very important to install rear wipers as well. This will help you quite successfully park backwards and taxi out of difficult and unpredictable situations. In this case, the replacement of the brushes will be slightly different from the instructions for replacing the front models. Here things will be more complicated, because all the cars are quite different, so the approach to them will also be different. But for convenience, consider the general instructions.
Wiper blade replacement rear window has the following features:
- Each rear "wiper" has a mounting nut. Find a protective element above it and lift it up.
- Now, using a 10 wrench, very carefully unscrew the nut. Rotate the tool and pull it towards you. In fact, such a procedure is quite simple to perform. And now you can safely remove the wiper itself.
- Next, use a screwdriver to loosen the latch and replace the old device with a new one, as described in the previous case. When buying rear wiper blades, be sure to pay attention to the bend of the product itself, because the quality of the cleaning itself will fully depend on this.
How to remove frameless wipers
Before removing the frame wipers, thoroughly clean their fasteners. Only then can the device itself be dismantled. You will have to do the following:
- carefully unscrew the fixing studs;
- now stick out the brush body;
- carefully remove the rubber plugs of the bolts;
- unscrew the bolts.
Pay Special attention for the process of unscrewing the bolts. This should be done very carefully, because most often they are connected directly to the motor that sets them in motion. If you accidentally damage this mechanism, then even the highest quality and expensive models"janitors" will be useless.
Installation of new frameless products
Replacement frameless brushes windshield wiper is a procedure that must be performed with extreme caution, so for the first time it is recommended to see how professionals will replace it, and only then do it yourself. But still, if you decide to do it yourself, then follow these steps:
- To begin with, you will have to lay new rubber gaskets under the wiper bases.
- Now fit the base of the prepared new product onto the square pin.
- Next, seal the connections with the washer that you removed when dismantling the previous wiper.
- And finally screw fixing bolt corps.
conclusions
So, why do you need to replace the wiper blades? Toyota or any other car model needs this procedure regularly. Such actions can reduce the risk of road traffic accidents in bad weather. Experts recommend replacing once a year or immediately after you notice that the “wipers” have begun to do their job poorly.
Change the wiper blades for the front and rear windows very simple. In the first case, you just need to follow general instruction. And in the second, take into account the individual characteristics of your "iron friend". It will be a little more difficult to cope with frameless products, but nothing is impossible here. A little patience, effort and caution - and you will quickly cope with the task. Change your windshield wipers regularly and you'll be able to fully enjoy driving in all weather conditions.
Car wipers are used for cleaning windshield from dirt or moisture. With intensive use, after a few months it becomes necessary to replace them. Similar activities are carried out in any service center. It is not at all necessary to contact specialists and pay money, since the task can be completed independently. Windshield wipers on most vehicles are of the same design and there are no major differences when replacing them.
When you need to replace wipers.
Installing new wipers should occur when there are several types of problems:
- Checking the rubber element showed that it had hardened and cracked. This indicates wear and tear.
- When driving on the windshield, a creak or other extraneous sounds occur.
- The quality of glass cleaning has dropped dramatically. The appearance of stains on the surface or some other characteristic problems directly indicates the need to install new brushes.
- When it rains, the effectiveness of the wipers is minimal and water is practically not drained.
The work should be divided into several parts. The first step is to determine which elements should be replaced. For this, the design of the janitor is considered. It consists of three main elements: the lower arm, a metal blade and a rubber brush. The first two types of parts fail quite rarely and main reason their malfunctions can be called mechanical impact. Rubber brushes gradually wear out and must be replaced.
Replaceable elements of the same type are purchased. To do this, you need to remove the old products and measure their dimensions. It is not at all necessary that the dimensions of the individual parts will match for the left and right wipers. Quite often, one of the windshield wipers is shorter and a similar point must be taken into account.
The procedure for installing a new wiper.
It is required to move the metal lever a certain distance from the glass and fix it in a similar position. The product, in its normal state, fits snugly to the surface due to the tension of a special spring. When the wiper is brought out perpendicular to the windshield, it is able to return it to its original position. If the rubber element has already been removed, then the impact will occur metal part. With a high degree of probability, this will break the glass. It is necessary to act carefully and such a problem will not arise. It is recommended to cover the windshield with a towel during work. Even if the wiper falls, the impact will be absorbed.
On most models, the rubber brush is connected to the metal leg using a special plastic clip. In some cases, a latch is used. When the brush is removed from its place, it is required to install a new product. It is inserted into its place and moves until a characteristic click is heard. A similar sound indicates the end of the replacement. It is required to go to the second wiper and repeat the procedures exactly.
How replace wipers- this is not the only question of vehicle owners, as they often ask about which brush to buy for installation. On modern market numerous options are presented. They can be original or generic. In the first case, the brushes will fit perfectly, but will have a higher cost. A universal model must be selected based on the available dimensions.
Video on replacing windshield wipers
This article will discuss how to remove the wiper blades from your vehicle. It is worth noting that there is nothing complicated here, the main thing is to do everything carefully, take your time and have a small set of tools. Modern wipers should be changed regularly, once a year. During this time, they wear out a lot, are not able to clean the windshield with high quality. Of course, there are also models that can last more than a year, but they are not very cheap either. In this regard, it is better to spend a small amount every year and get the same effect. Many drivers are faced with such a problem that over time, the wipers lose their properties. All this can lead to sad consequences in the form of a traffic accident. The fact is that the driver simply will not see the situation on the road, will not be able to correctly respond to various moments.
How to remove the wiper blades - this question arises for many drivers, especially beginners. And there is nothing surprising in this. After all, a lot depends on the quality of their work. To prevent unpleasant situations, windshield wipers are recommended to be changed every year. To the very main problem during the replacement, they attribute the fact that all wipers have a different mount. In this regard, there is a little confusion, you have to read the instructions and refer to knowledgeable people. Of course, there are models that fit any windshield, but this is quite rare. Producers try to profit by producing different kinds fasteners.
What is a janitor made of?
Modern wipers have a number of elements that you should pay attention to: 
As for the replacement of the wipers, there is nothing complicated. When dismantling the old ones, cover the windshield with a piece of cloth. This is to prevent scratches. After all, if you do not do something carefully, then the windshield will quickly become covered with scratches. Further diverted lower arm from the windshield, unfasten the old brush and install a new one. The brush should be changed according to the mechanism that you have. Concerning reverse installation, then everything is done in reverse order. There is nothing complicated here, which is not surprising. After all, it does not require special knowledge and special experience, each driver will be able to complete the process. It is worth noting that one should not neglect the replacement of wipers. After all, not only comfort of movement, but also safety depends on this.
About, how to remove wipers, sooner or later every driver is destined to think, since the part is consumable and will require replacement. Alternative option- contact the service station.
Wipers, they are windshield wipers - an inconspicuous element, but extremely important, especially on certain days with inclement weather. Only thanks to this detail, the driver is able to move his car in rain or snow.
As a rule, they are able to perform their functions qualitatively within six months. After this period, they will most likely require replacement. Two options are possible here: if the design of the wiper allows it, then it is possible to replace only the rubber blade that directly cleans the glass, or you will have to purchase a new kit.
Regardless of whether you have to change only the rubber band or the entire brush, it will need to be removed from the wiper arm. It is quite possible to remove it on your own, we can say that this operation is one of the easiest in a car, so it is not at all necessary to contact a specialized station.
Withdrawal order:
1. To remove the brush from the wiper mounting lever, it is necessary to tilt the lever up and press the latch, which is located on the middle axis of the brush itself. Then, at the same time, with a slight movement, we pull the brush off the attachment lever and put a new one, or we replace the gum in the old brush and put it in its original place.
In order to change the rubber blade to a new one, it is necessary to bend the fastening brackets at one end of the brush, pull out the worn one and put the metal clips on the new one. Please note that the bend must be directed towards the glass. We put a new gum and clamp it with mounting brackets.
2. If you find a malfunction in the wiper mechanism itself and you need to not only replace the brush or rubber band, you will have to remove the entire wipers. We start by opening the hood. There we find a black protective cap - it is located on the axis of the lever in front. Gently put it on and take it off. We remove the lever itself with sharp movements, pulling it off the finely splined connection of the wiper axis.
3. When put the wiper arms back, it is necessary to screw them in such a way that the left lever is at a distance of six centimeters from the lower edge of the windshield. We set the right lever in such a way that it reaches the lower marking on windshield. We put the wipers only after we put the wiper motor in place.
