Soundproofing kit for Hyundai Accent. Hyundai Accent soundproofing kit Do-it-yourself work

Noise isolation Hyundai Accent

This time we will talk about a time-tested car Korean manufacturer Hyundai. Speaking of Accent models we can state with confidence that the car turned out to be, of course, successful in terms of reliability, unpretentious, convenient and comfortable for its class and price group. Unfortunately, reverse side is that the interior plastic, seat upholstery materials and the overall interior design did not differ high level quality. As well as the interior decoration, the vibration and noise insulation of the car interior was also badly damaged, which, unfortunately, is typical of the last for most manufacturers.

Well, let's start soundproofing the car. Since the car has already traveled decently, our craftsmen spent a lot of time washing all the elements of the interior and trunk of the car from dirt. After the panels have dried, we degrease the panels.

The first step will be the roof insulation Hyundai Accent. We lay the first layer of vibration-insulating material SGM M2. This material allows us to significantly strengthen the panels, thereby reducing the noise from the street. The second layer on the roof of the car is the soundproofing material Splen. Due to this layer, we significantly reduce the level of noise from the street.

The third layer of noise-insulating synthetic felt allows us, in addition to a significant reduction in noise, to improve the thermal insulation properties of the car.

The second step is soundproofing. Hyundai doors Accent. The first barrier on the way extraneous noise will be vibration-insulating material SGM M3. In addition to reducing the penetration of extraneous noise into the car interior, this material significantly reduces the effects of neighbors hitting a narrow parking lot.

The second layer is SGM ShumFlex soundproofing material. Due to the high noise insulation properties and moisture-resistant adhesive composition, this material is not only effective, but also durable.

The third layer of vibration-proof material SGM M2 allows us to create volume in the inside of the door, which allows even regular acoustics to "sing" in a new way.

Door skins are additionally treated with Bitoplast soundproofing material. This layer allows us to almost completely remove overtones from the interior trim elements themselves.

The third stage is the soundproofing of the Hyundai Accent floor. We first use the SGM M3 vibration isolation material. High efficiency material, coupled with a relatively low weight, allow us not only to achieve high results, but not significantly raise the mass of the car.

Next comes a layer of soundproofing material SGM BiBiTon. The structure of this material allows us to significantly reduce the level of extraneous noise in the car. Also, the new adhesive base allows the material to work properly for a very long time.

The third layer is a soundproof synthetic felt.

The luggage compartment of the car is also processed in several layers. The first is, as in the car interior, the SGM M3 vibration isolation material.

The second layer on the floor is also SGM BBCTon, but on wheel arches and inner surfaces of the wings we use SGM ShumFlex. Also on the inner surfaces of the wings of the car, we additionally lay a layer of soundproof felt.

Vibro-noise isolation of the Hyundai Accent hood allows us to reduce general level noise in the car. Produced this work in two layers. First goes vibration isolation layer of SGM M2 material. The second is the noise-insulating SGM ShumFlex.

You can see a detailed photo report on the work carried out

An elastic sheet is an effective and specialized noise insulator (namely, a noise insulator, not a vibration and noise insulator). It is good for damping sounds, mainly coming into the cabin from below - from the engine and wheels. Although the thin version of the sheet is effectively superimposed in the area of ​​\u200b\u200bthe doors, trunk or roof. It is also used for acoustic tuning.

With proper application able to dampen 60-90% of noise, depending on the thickness and modification. Associated quality - a good heat insulator.

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

The material is based on foam or cellular polyethylene. During the production of the sheet, its “bubbles” are partially “pierced” by needle punching. (An open cell structure attenuates sounds much better than a closed one.)

The main parameters of the sheets "Accent":

• standard dimensions - 1.0 x 2.0 m or 1.0 x 0.75 m;
• thickness - 8, 10, 15, 20 mm;
• specific weight - from 240 to 500 g/sq.m;
• operating temperatures - from -30 (frost) to +80 °С;
• color of a polyethylene basis - gray.

Improved modifications are supplemented with a mounting-adhesive layer for “dry” gluing on metal or on the bottom layer of another insulating material (in the sheet marking, the adhesive layer is referred to as “KS”). There are modifications with a lavsan film, which increases heat and moisture insulation (the designation in the marking is “LM”).

Noise isolation "Accent" popular due to a wide range of sheet thicknesses and relatively low cost. But, probably, the use of a thinner and cheaper “Splen” as a noise suppressor is even more popular with us, which is not very correct. "Splen" is still a heater with the associated property of a sound reflector ("pseudo noise").It gives some noise damping, but is significantly inferior to a full-fledged sound insulator (a real “Shumka”). This is easy to verify, for example, by wrapping the same ringing phone first in a piece of Splen, then in an Accent ...

Some general installation rules:

• for full-fledged sound insulation, it makes sense to glue Accent (like other Shumkov) on a preliminary layer of a vibration damper (vibration damper) - for example, on Vibroplast, Bimast or Vibrofilter;
• materials should not be placed on metal stiffeners - only on the main areas;
• fewer joints; in continuous areas, try to use solid pieces of material;
• "Accent" dampens the sounds coming from the adhesive side, so the adhesive side should be directed outward, to the street (whereas, for example, the Bitoplast silencer has the opposite, so it is better to glue not "Accent" on the skins, but such a noise as " Bitoplast");
• like other Shumkov, "Accent" does not really like moisture, so in particularly wet places it should be replaced, say, with "Splenom" (weak as a noise suppressor, but very resistant to moisture).

Ideally - for both noise and heat insulation - three layers of materials can be laid: below - vibration damper, in the middle - noise, on top - thermal insulation of the "Splen" type (strictly in this sequence). If only the thickness of this “layer cake” would then allow the temporarily dismantled interior to assemble back.

TD Noise Isolation produces ready-made insulation kits, in which everything necessary for the complex processing of the main elements of a car has already been calculated. A set of materials specially selected for your car will reduce acoustic noise and make the ride comfortable. The doors will close with a dull sound, knocks in the trim and panels will disappear, the installed acoustics will sound cleaner, the interior will become more comfortable.

Hyundai Accent soundproofing kit includes:

1. floor soundproofing kit

2. roof soundproofing kit

3. door soundproofing kit

4. hood soundproofing kit

5. trunk soundproofing kit

6. arch soundproofing kit

Noise isolation options for Hyundai Accent

the car tuning kit includes everything you need to do a complete do-it-yourself car treatment in three gluing options. To purchase a kit, select required level comfort and add it to your cart.

Tycho gluing kit

The most economical option, contains the minimum set of materials necessary for the work. Choose this kit if the level of comfort in the cabin is sufficient, there is no need to install acoustics, the noise budget is limited.

Gluing kit Even quieter

Golden mean. The set will provide an average effect and complete soundproofing auto. 25% of our customers choose this option. The result of sizing will please you, but you can make noise even better.

Gluing kit Very quiet

The most effective and most popular sizing kit. It includes the most technological types of materials. If you are gluing a car for the first time or installing acoustics, we recommend taking it.

Number of materials in the gluing kit

Material name	Quiet	even quieter	Very quiet
Vibration isolation 1.5 mm in sheets 50x70 cm	8
Vibration isolation 2 mm in sheets 50x70 cm	8	10	10
Vibration isolation 3 mm in sheets 50x70 cm	19	24	24
Vibration isolation 4 mm in sheets 50x70 cm	5	6	6
Splenium 4 mm in sheets 75x100 cm	10
Splenium 8 mm in sheets 75x100 cm	2
CarLok 8 mm in sheets 75x100 cm		2
Mat 3 mm in sheets 75x100 cm		10	2
Mat 6mm in sheets 75x100 cm			10
Mat 10 mm in sheets 75x100 cm			2
Anti-creak in tape 25x1400 mm	4	4	4
Bitoplast 5 mm in sheets 100x100 cm	3	3	1
Bitoplast 10 mm in sheets 100x100 cm			2
Total	11200 rub	12900 rub	15000 rub

What materials are included

for doors

High-quality processing is impossible without soundproofing doors. We recommend to combine this stage with the installation of an audio system instead of the factory one. Usually sizing the doors is done first. Door treatment will significantly reduce the noise in the cabin.

For floor

pass given element bodywork will not work. The main sources of vibration and sound are adjacent to the bottom: arches, suspension, roadbed. A significant layer thickness is laid on the floor.

for the roof

Shumkov roof processing serves to eliminate external noise and "crickets". The included materials will stop the noise without adding significant weight, all that remains is to carefully put the skin in place.

for the hood

The large size of this body element is a source of significant vibrations. Installing soundproofing the hood cover will also be the thermal insulation of the engine compartment.

For trunk

Insulation luggage compartment will significantly reduce the noise coming from the rear arches.

For wheel arches

The sizing of the fender liner blocks the transmission of vibrations and noise from the road and suspension. The arches themselves are not a source of noise. Wheel arches are insulated quickly if the dirt is thoroughly cleaned.

How to glue Hyundai Accent with your own hands

By ordering this set, you get all the materials necessary for making noise. We recommend that you immediately purchase tools for easy dismantling of the upholstery, a pressure roller, a solution for degreasing the surface and reinforcing tape.

Step 1. Dismantling

We begin dismantling the interior by carefully disconnecting the clips. Having reached the bare metal of the body, we prepare the surface. We wipe | clean from dirt and process with a degreaser metal surface let dry.

Step 2. Gluing

After finishing preparatory work Let's get started - installing layer by layer. Initially, we glue the vibration isolation layer. From above we lay soundproofing and sound-absorbing materials. Each layer is pressed tightly and rolled with a roller.

Step 3. Anti-creak and installation of the skin

Anti-skip treatment is performed at the final stage of work. We glue all the joints with anti-creak tape to eliminate squeaks. carefully return the original view. It remains to test the result.

If you carefully follow all the steps of installing Shumkov, the result will definitely please. We advise you to start simple: make noise wheel arches, then the floor, the trunk, and so on as you gain your own experience.

Or contact our own installation center - we will do it quickly and inexpensively.