Accent Model from the South Korean automaker Hyundai debuted in 1995. Almost 13 years have passed since then, but it still has not lost its relevance, being in good demand both in the new car market and in the secondary market. Accent was originally equipped with engines with a volume of 1.3-1.6 liters, paired with mechanics or automatic (more on their maintenance below). In some countries, the car was known under the names Dodge Brisa, Pony and Excel.
The second generation of the hatchback and sedan was on the conveyor in 2000. It is noteworthy that generation II was also assembled at the facilities Taganrog plant. For this reason, the novelty turned out to be better adapted to Russian roads and climate, which influenced the increase in its sales. The most popular was the 1.5-liter modification with MT or AT to choose from.
In 2003 Accent was restyled, although in Taganrog until 2012 the previous generation was still produced. In parallel with the second Accent, the third generation introduced in 2005 was also delivered to Russia South Korean assembly. In Mexico, the novelty received Dodge name attitude. After 5 years, Hyundai launched the next generation of its "brainchild", which received the code name "Solaris" in Russia and retained the name "Verna" in other countries.
If we compare the Accent with its closest competitors, then its indisputable advantages are small cost And cheap service, and replacing any part of the car will not be difficult even without contacting the service. Another plus of the model, the owners call a small gas mileage ( mixed cycle takes only 5-7 liters per 100 km), as well as the resistance of the body to corrosion.
IN different years Hyundai Accent was awarded quite prestigious awards as the best small model in Australia, as best car in its class in 2005 and until 2010 was in the TOP-10 best-selling cars in Russia.
Generation I (1995-1999)
G4EH 1.3 engine with manual
G4EK 1.5 engine with manual transmission
- What engine oil to fill in a manual transmission: API GL-5, SAE 75W90
- How many liters of oil (total volume): 2.2 liters.
- When to change oil: 90 thousand km s partial replacement for 30-40 thousand km
Generation II (1999-2006)
G4EA / G4E-A 1.3 engines with manual transmission
- What engine oil to fill in a manual transmission: API GL-4, API GL-5, SAE 75W90
- How many liters of oil (total volume): 2.2 liters. (until 2002), 2.5 liters.
- When to change the oil: 90 thousand km with a partial change at 30-40 thousand km
Engine G4ED-G 1.6 with manual transmission
- How many liters of oil (total volume): 2.5 liters.
- When to change the oil: 90 thousand km with a partial change at 30-40 thousand km
Generation III (2006-2010)
D4FA 1.5 engine with manual
- What engine oil to fill in a manual transmission: API GL-5, SAE 75W90
- How many liters of oil (total volume): 2.0 liters.
- When to change the oil: 90 thousand km with a partial change at 30-40 thousand km
G4ER 1.5 engine with manual
- What engine oil to fill in manual transmission: API GL-4, SAE 75W90
- How many liters of oil (total volume): 2.15 liters.
- When to change the oil: 90 thousand km with a partial change at 30-40 thousand km
Oil change in mechanical box transmissions on the Hyundai Accent should be carried out every 90 thousand kilometers. The procedure is carried out on viewing hole, lift or overpass. Before starting the replacement, you should drive 10-15 kilometers.
Proper preparation for changing the oil in the manual transmission and a list of necessary tools
Safety rules for changing the oil in a Hyundai Accent car:
- Dress in special clothing to avoid contact with the waste fluid on the skin. Attention: the ingress of used car oil on the skin leads to the appearance of various skin diseases, up to skin cancer.
- Wear gloves to work safely.
- Change only after the oil has cooled slightly.
Before starting the process of changing the oil in the box, you need to prepare the tools:
- a set of wrenches (including a 24 wrench);
- pharmacy or special syringe;
- screwdriver;
- pliers.
Step-by-step procedure for changing the oil in a manual transmission
Draining old oil from a manual transmission in a Hyundai Accent occurs as follows:
Pan flushing:
- Open the tray. Carefully drain off the residual oily liquid. Clean the surface with a wire brush and wipe with a clean cloth.
- Screw the tray back.
Step-by-step instructions for filling new oil in the Hyundai Accent manual transmission:
- Unscrew the filler plug with a 17 wrench.
- Pour new syringe transmission oil to the required level.
- Tighten the filler plug with a 17 wrench.
- Start the car, drive a test 10-15 kilometers and reinstall vehicle onto a flat surface.
- Check the oil level and top up if necessary.
It is necessary to check the oil level once every 10 thousand kilometers. The procedure helps to find leaks, if any. You can control the oil level through the inspection hole.
The choice of oil for Hyundai Accent
The Korean automaker indicated in the instruction manual which oil to pour for the Hyundai Accent into the box. In a car with a manual transmission, it is required to fill in a liquid with a viscosity of 75W90 with an API GL-4 coefficient. For example, Total Transmission Dual 9 FE 75W90. This car oil has extreme pressure parameters, which guarantee the protection of manual transmissions from corrosion and wear during different conditions operation.
Greetings. We will change the oil in the manual transmission for the second generation Hyundai Accent (LC).
An oil change in a manual transmission on a second-generation Accent should be done every 90 thousand kilometers. I recommend reducing this interval a little.
To perform an oil change, you will need:
1. Hyundai oil(75w85) three liters. Article for purchase: 04300 - 00110 (1 liter).
2. Two new drain bolts (43171 - 34002) and filler (43121 - 11000) necks.
3. O-rings for drain (21513 - 11000) and filler (17511 - 16000) bolts.
4. Funnel with hose.
5. Basin for used oil.
It is most convenient to change the oil in a manual transmission on a lift. Alas, not everyone has a lift in the garage, so we will look at how to change the oil in a regular garage.
Also remember, before changing the oil, you need to drive 5-10 km.
Tools:
- rolling jack
- four wheels
- knob
- extension
- heads for ten, seventeen, twenty-four
Step by step replacement
1. Jacking up left side car and substitute the wheels under the wheels, we do the same on right side. In the photo below you can see what it looks like.
After such manipulation, the car rises, and access to the gearbox appears.
Do not forget to tighten the handbrake after installing the car in this way.
2. In order for the oil to drain faster, you need to unscrew the oil bolt filler neck. To gain access to the bolt, you need to dismantle the plastic casing that is responsible for the air intake. It is fixed with two bolts.
We unscrew the bolts and remove the casing.
3. After dismantling the casing, we see the oil filler neck bolt. We unscrew the bolt with a head for seventeen or a key.
Before unscrewing the bolt, put a bowl of oil under it.
4. We unscrew the drain bolt with a key or twenty-four head.
Do not forget to substitute a basin.
5. We twist and tighten the new drain bolt, with a new o-ring.
6. Take a funnel with a hose and insert the hose into the filler hole.
7. The box contains 2150 milliliters of oil. Two liters are poured immediately, and 150 milliliters are measured and poured.
8. Wrap and tighten the filler bolt with a new ring.
9. We mount and fix the air intake casing.
We show how to change the oil in a manual gearbox with your own hands Hyundai car Accent 2. Oil from the box, as well as from the engine, must be drained hot, i.e. we drive 5-10 km before the procedure. The drain plug is unscrewed with a 24 key, it is located to the left of the engine. Under drain plug there was an aluminum ring that stuck to the box, we tear it off and put a copper one in its place:
We have a magnetic drain plug, this is done in order to collect metal chips, be sure to clean it. Then we spin back. We clean the body of the box from dirt and oil with the help of a "carburetor cleaner". Loosen this screw:
And pour oil through the resulting hole. We take either a funnel with a long hose, or a syringe, whichever is more convenient for you. We will fill in ZIC 75w90 fully synthetic, it is necessary to fill in 2 liters 150 grams. There is also an aluminum washer on the filler neck bolt, we change it to a copper one. We twist right moment.
Video oil change in manual transmission manual Hyundai box Accent 2:
Backup video how to change the oil in a manual gearbox Hyundai Accent 2:
Many do not understand why it is necessary to change the oil in a mechanical box at all, the fact is that each oil has its own service life, for transmission oil it is 2-3 years or 60 thousand km. run. After that, it begins to lose its properties and exposes the mechanisms of the box to more wear.
Contrary to popular belief, the oil in a mechanical box still needs to be changed. Yes, it begins to lose its properties much later engine oil but still loses. Therefore, an oil change in the Hyundai Accent manual transmission will be needed sooner or later. However, it is not difficult to do it yourself.
When to change the oil in a box Accent
The average oil change interval in a manual transmission is 60,000 km or every 2-3 years. However, the maintenance regulations for the Hyundai Accent indicate replacement interval at 90,000 km or every 6 years.
The volume of oil in the manual transmission Accent is just over 2 liters. It is recommended to fill in oil according to the characteristics of API GL-4, SAE 75W/85 or 75W/90) Hyundai Genuine Parts MTF 75W/85 (art. 04300-00110), TGO-7 (MS517-14), ZIC G-F TOP 75W/85, HD GEAR OIL XLS 75W/85.
How to change the oil in an Accent box
The principle of changing the oil in a box is a lot like - oil is drained onto a warm engine, after a short trip. The car should be put on a pit or overpass.
Next, you need to substitute a container for the old oil and unscrew the drain plug with a 24 key. While the oil is draining, you can take care of the drain plug - it is magnetic, so it does not interfere with cleaning it. You also need to replace the washer on it. After the oil has drained, you can screw the plug back. Tightening torque - 30-35 Nm.
Then you need to pour oil into the box. To do this, unscrew the filler plug and fill in new oil with a syringe, or a funnel with a hose. Washer on filler plug also need to change then screw the cap back on. Tightening torque - 25-30 Nm.
