Tuning running grant. Do-it-yourself tuning Lada Grants: photo and video examples

We can bet that you have noticed more than once the abundance of lights and instruments on the panel of foreign cars. Sometimes they cause envy among many owners of domestic cars. However, do not be upset, because each of us can transform our Lada. It's enough just to want it. Well, we will help - read the step-by-step description of tuning the car interior with your own hands. We show on the example of a new model of the VAZ automaker - Lada Grants.

1 Tuning the instrument panel Lada Granta - making your interior brighter

As practice shows, the vast majority of Lada Grant owners are not satisfied with such an element of the car interior as the instrument panel. Namely, the color and intensity of its illumination. Many car owners turn to specialized car repair shops for help, but it is quite possible to improve this part on your own. The main thing that is required for this is experience in working with a soldering iron and a desoldering pump. Let's consider such tuning in more detail.

It is worth remembering that this element of the Grants interior is equipped with LEDs. This significantly distinguishes Grant from her predecessor, Lada Kalina.

Based on this, the tuning of the Grants instrument panel will differ from the improvement of previous VAZ models.

Before tuning this part in Lada with your own hands, you need to disassemble it. To do this, unbend the plastic clips located around the entire perimeter of the instrument panel. Next, remove the back cover. The latter is easy to get by pulling up on the special arrows. After dismantling the cover, we will see the Grants instrument panel board. We take it out and proceed to the display. It may be soldered to the panel and a desoldering pump must be used to remove it. After soldering, the display antennae should move freely in the landing sites. After dismantling the display, we get access to all the LEDs on the Lada panel. Next, you need to insert your LEDs instead of the factory ones, and then immediately check the health of the entire instrument panel. If all the lights work, then you can proceed to reassembly. When assembling the instrument panel, special attention should be paid to the location of the display antennae. They should fit into their seats as accurately as possible. Otherwise, the system will stop working. At the end of the assembly, it is worth treating the cover of the Grants shield with cream Antiskrip.

2 Lighting deflectors in the salon Grants - we turn driving into a holiday

Tuning the instrument panel in Lada Granta is far from the only way to make the car interior brighter. And if you are tired of the monotony and dullness, then the lighting of the stove air ducts in the cab of a Lada car will be an excellent solution to this problem.

The main task of Grants round deflectors is to supply air to the driver and passengers. Highlighting this part will be a great way to highlight the car from thousands of the same. This is easy to do with your own hands, but we need a flat screwdriver, LED strip and wires for this.

Having all this, we can perform interior tuning. First, we take out the air ducts. To do this, take a round screwdriver and snap off the fasteners. Then, using double-sided tape, we attach the LED strip around the deflector circle. We stretch the wires to the place where the interior lighting of the Grants is connected. If you plan to connect to the car's lighting dome, then we stretch the wires along the right and left pillars of the side windows. Next, we proceed to the installation of already tuned air ducts. Before the holes should be treated with cream Antiskrip. Next, we carefully wrap the wires of the deflector with tape, put it into the hole, and behind it we install the deflector itself.

3 Rear head restraints for Grant - we increase the comfort of the car

When tuning lighting and other elements of the car, do not forget about comfort. Therefore, it will not be superfluous to tune the seats of Grants. It is about the improvement of this part of the cabin in Lada Granta that it is worth talking in more detail.

Some configurations of the Grant are equipped with head restraints at the factory. Other cars are deprived of this privilege. If you are the owner of just such a car, do not be upset. On the contrary, this will be an occasion to install these parts with your own hands, and at the same time an opportunity to get to know your car better.

Before you do the tuning of the car interior with your own hands, you need to purchase a set of headrests for Grants. They are available in almost all car dealerships in the country.

We will also need the following tools:

• drill with drill No. 6;
• key number 10;
• marker (not black);
• screwdriver;
• sharp knife.

The first thing to do is to dismantle the seat backs. To do this, carefully remove the upholstery and unzip it. Next, we unscrew with a screwdriver and take out all the plastic components and the locking buttons that are in the backs of the seats. After that, you need to find the centers of the colored inserts on the upholstery and mark them with a marker. Then we attach the head restraints with brackets to the seat backs, mark the places where the head restraints will be installed. After that, we drill holes in the pipes of the latter, fasten the brackets to the seats, tighten the fasteners with a wrench. Next, with a sharp knife, we make small incisions, in place of which we install the head restraint fungi. At the finishing stage, we carefully assemble the seats in reverse order.

It is worth noting that the headrests will not only add comfort to your Grant. Thanks to this tuning of the car interior, you can store things on the back shelf of the car and not worry that they will fall on the heads of passengers.

All these improvements for the Lada Grant are designed to make the operation of the car more comfortable. With them, driving will be much more enjoyable.

Came to the car market recently. This is not to say that this is a perfect car model. allows you to minimize its minor flaws and adjust the parameters of the car to the needs of a particular motorist. An excellent version of the appearance improvements can be seen in the video.

Work on improving the engine and accelerator

The first thing you need to pay attention to is the chip tuning of the engine. The standard setting of the electronic unit microcircuit is designed for optimal parameters for engine break-in. Subsequently, the microcircuit is removed from the block and reconfigured. You can do this yourself only if you have some experience and knowledge of the basics of electronics. The average driver cannot cope with this work, so engine chip tuning is done in specialized car repair shops. A simple "rewriting" of the microcircuit allows you to increase engine power by a quarter. At the same time, the internal wear of parts will decrease by almost two times.

The second point that drivers will not disregard concerns the accelerator pedal. Initially, the car does not respond well to pressing the pedal: in order to achieve high speeds, the pedal must simply be pressed into the shelves. This can be avoided by making certain changes to the intake system, tightening the throttle cable and adjusting the camshaft.

Chassis tuning

Constantly undergoes tuning. The fact is that the Grants suspension turned out to be soft, designed, rather, for a comfortable ride on flat roads. Alas, there really are no such roads, so improvements are needed for the Grants rear suspension with their own hands.

You can do it simply: cut off one coil of the spring. The car will lose comfort, but additional rigidity will give stability on the road. The front suspension can be seen on the shock absorbers from Lada Kalina. They are slightly lower, so the car will get a lower landing.

car exterior tuning

External tuning of Lada Grant is not necessary, as the car looks decent. But it is in this direction that car owners are working especially diligently. Do-it-yourself Lada Granta is remade beyond recognition. Car owners are especially biased towards the bumper. It is believed that he looks old and non-aggressive. used more often than others.

It fits perfectly on fasteners, and looks modern. But the use of the STM bumper seems more promising. In comfort, you will benefit greatly. The shape of the air intake is such that additional cooling is created for both the engine and the brake system. Connectors for headlights and fog lights also look good.

The rear bumper is rarely replaced.

More often in the rear of the car, tuning is limited to installing a spoiler. For many car enthusiasts, this is a simple decoration. In reality, the spoiler is of great importance when driving at high speeds. It “works” like an airplane wing, with the only difference being that here the air flow presses down on the spoiler, pressing the car against the roadway. Only the correct calculation of the aerodynamics of the spoiler will give stability to the car, so it is not recommended to make it yourself. Watch a video demonstrating the action of a spoiler on the road, and you yourself will give up the idea of ​​\u200b\u200bmaking one at home. Usually such parts are made in workshops on an individual order. This is where the finished product is painted. The owner only needs to install with his own hands.

Sometimes the radiator mesh and the front panel change.

The radiator mesh also does not protect the engine very well. In the summer, this is fraught with clogging of the engine (and the interior too) with plant fluff and insects. Eliminating this drawback on your own is as easy as shelling pears: an aluminum mesh is installed between the ribs of the radiator grille (see video). You can fix it with high-quality glue, but it is better to do this with clamps. Protection from dirt and insects will be provided.

Changing the appearance of the cabin depends only on the imagination and ingenuity of the designer

Tuning the front panel of the car and the interior as a whole can be classified as a design research for car owners. Granta is available in various interior and front panel design options, so it’s better to buy the car that best suits your needs. As photos of the interior trim show, car owners are not always satisfied with the interior design. It makes no sense to describe design options, as they may not appeal to the owner of the car. Unexpected solutions are used, ranging from the replacement of the factory upholstery to the complete replacement of the seats.

For Grant, do-it-yourself tuning, the photo of which you see, is not very expensive and does not take much time.

The basic equipment of the car is such that many parts from other cars are suitable for it, giving stylish external changes. The same Lada Kalina, which was noted earlier, is an almost ideal "donor" of parts for the Lada Grant. The component market is saturated to the limit, so tuning Lada Grants should not create problems for car owners. Go ahead, perhaps your car tuning option will become the prototype of the new Lada.

Domestic manufacturers have never taken into account the wishes of motorists when designing and manufacturing cars, guided only by instructions from the country's leadership and the relevant ministry. But the market economy has made its own adjustments and now the company's management is actively using the experience of VAZ car owners in their work and is trying to introduce constructive proposals coming from them into production. For example, the management of the company promised to take into account the huge number of wishes expressed for improving the design of models and the Grant, expressed by the owners of these cars, in the near future. And what about those who have already purchased a car and face its shortcomings every day? Eliminate them yourself. Moreover, many of them will not be difficult to fix with your own hands. So, how can you improve your imperfect car?

The main problem that VAZ car owners face is the lack of money for high-quality “pumping” of their car. Most car owners prefer to put up with them, but there are restless mechanics who make the necessary changes to their iron horse with their own hands, saving money and gaining invaluable experience in repairing their own car. We present to your attention an approximate plan for carrying out work on independent tuning of a Lada Grant car.

Tips on how to start tuning Lada Granta with your own hands and where to start finalizing a car.

1. Carefully inspect the pipes of the fuel supply system and the clutch cable. If there is direct contact between them, they must be isolated from each other. After that, pay attention to the steam outlet and corrugated fuel pipes.

Interesting do-it-yourself tuning work is given in the article step-by-step instructions!

2. At the location of the windshield washer reservoir, a piece of protective tape must be glued to the body, which will protect the reservoir body from wiping during operation.

3. Check the position of the harness located next to the brake fluid level sensor. This can be done by slightly turning the tank cap so that the battery does not touch the motor shield. If it becomes necessary to replace the harness, then after that you need to check the brake fluid level.

4. Inspect the wires of the ignition system, which are marked 2190-3724026. In case of damage to the insulation, insulate the damaged areas with 15-20 layers of electrical tape.

5. Check oxygen sensor diagnostic harness. The manufacturer tries to minimize the sagging of the wires, as a result of which their mechanical damage may occur. To prevent damage in the future, it is necessary to reduce the tension of the wires by pulling them out of the passenger compartment a little.

6. In conclusion, you need to check all the brake pipes of the car, since they may be damaged due to too close relative position. To breed them a little to the sides, you can use a regular screwdriver.

All these simple "improvements" will eliminate some of the factory defects of the car and prevent the occurrence of serious malfunctions, the causes of which they can become.

Such a move will solve the problem on all thermostats, with the exception of Luzar products.

Refinement of the reversing lamp

Standard reversing lamps do not meet the needs of many Lada Grant owners. They are especially difficult to see in bad weather conditions, for example, during a powerful snowstorm or in fog. Therefore, it is also necessary to look for a solution here. The best way out of the situation would be to install a xenon lamp. Lighting devices of this kind are not new for foreign cars, even in the “standard” configuration, but AvtoVAZ has not yet come to this. Therefore, you will have to modify the car on your own. Let's analyze the installation and connection for H1 xenons at 5000 K with an ignition unit. Installation is carried out as follows:

1. We dismantle the old lighting fixture.
2. Installing a new lamp.
3. We connect standard wires to the ignition unit, from which the xenon lamp is powered.

That, in fact, is all. A small investment of time and basic knowledge of the Lada Granta electrical circuit will help you achieve a bright cold light that will be noticeable in any light. Now you can safely take back both at night and in fog or in a snowstorm.

Autotuning has recently become widespread. Modernization plunges not only old, but also new cars. The Lada Granta liftback is no exception. The main goals pursued by car owners are to increase power, improve handling, change the exterior and interior.

Tuning "Lada-Granta" do-it-yourself liftback

Although the Lada Granta in the liftback body is a modern car that is offered in a large number of trim levels, many owners still try to change and refine something in it, making the car different from the standard. Various tuning options allow you to make changes both to the car as a whole and to its individual systems and components. It is worth dwelling on such improvements in more detail.

Engine

Almost every owner would like to drive a more powerful and dynamic car. The weakest version of the Lada Grant liftback develops only 87 hp, and the most powerful version of the engine has a power of 106 hp, which is also unable to provide decent car dynamics. You can make the power unit more frisky without serious intervention in the design of the unit in the following way:

In addition to the listed engine upgrade options, you can install an electronic gas pedal. This element will provide the most accurate response of the power unit to pressing the pedal. New versions of such elements have an additional module that allows the driver to select the desired driving mode.

With a more serious approach to modernizing the Lada Grant engine in the liftback body, you can install a turbocharger, forged pistons and bore the cylinders. If you listen to the recommendations of experts, then such improvements must be carried out comprehensively, since equipping a car with only a turbine can damage the pistons as a result of increased load. Also, if you put only forged elements, then there will be no increase in power.

Chassis

In addition to engine improvements, the undercarriage of the machine (suspension brackets, levers, etc.) can also be upgraded. The model in question has a soft suspension, designed for driving on good roads. Any changes to the suspension can make it stiffer, which will have a positive effect on handling, but at the same time, comfort will decrease. Changes can be made to the rear suspension by reducing the number of spring coils by exactly one. To give the body rigidity when cornering, you can install strut extensions on the front end, the same as on Kalina.

To lower the Grants liftback suspension, you can choose one of the following methods:

• replacement of the suspension with a design with variable ground clearance. Thus, the shock absorbers are given autonomous rigidity. In the summer, the car can be lowered, and in the winter it can be raised;
• replacing the standard suspension with a new one with a lower landing. In this case, an appropriate set of springs and shock absorbers is selected;
• installation of low profile tires. This option allows you to reduce the landing and improve the handling of the car;
• equipping a car with lowered springs without replacing depreciation elements. This option will only be suitable for city driving.

In addition to the above improvements, you can make the following changes to the suspension:

If we consider changes in the brake system, then the simplest tuning option is to replace the standard brake discs with products of a larger dimension. In this case, when installing R14 disks instead of regular R13, no alterations are required.

Together with the discs, you can install foreign-brand brake pads. The discs on the Lada Granta liftback can be supplied, for example, by Brembo (article: 09.8903.75), and the pads - by Fiat (article: 13.0460–2813.2).

Video: lowering the landing on the example of "Grants" in a sedan

Appearance

Exterior tuning is quite diverse and depends only on the imagination and financial capabilities of the car owner. To change the appearance, you can install or replace the following elements:

• roof rails. These products are to some extent capable of correcting some errors in the control system. They differ both in weight and in the degree of aerodynamics. The installation of such elements gives the machine an individual character;
• Luke. Such an addition can not only improve the design of the car, but also increase the comfort in the cabin in hot weather;
• spoiler. This element is one of the main ones in external tuning, as it allows you to stabilize the car at high speeds. The color scheme and shape can be selected as desired after taking measurements from the machine;
• analog mirrors. In the Lada Grant standard, the liftback is equipped with manual mirrors. Instead, you can put elements from Kalina, which are configured electronically. If there is no desire to change mirrors, then heating can be built into standard devices;
• disks. The choice of rims today is quite diverse and can significantly transform a stock car. You can choose both cast and forged wheels of a suitable dimension;
• bumpers. Tuning these elements will add some emotional component to the appearance of the car. The most popular model of the front element is “I am a robot”, which perfectly replaces the standard product. It is also possible to install bumpers in specialized studios;
• radiator grille. You can buy a tuned part or modify it yourself. For this, an aluminum mesh is most often used, which improves protection against pollution;
• arch extensions. The pads not only protect the car body from dirt flying from under the wheels, but are also able to visually expand the car. The expanders are made of plastic and are fixed to the body with double-sided tape;
• door sills. The main function of these products is to protect the thresholds from impacts and preserve the paintwork. During the impact, the plastic takes it upon itself and, in the worst case, will simply break, but the threshold itself will remain intact.

Salon

A lot of attention is paid to interior tuning, since this is where the owner and passengers spend most of their time.

Steering wheel cover

One of the first elements of the interior, which is subject to change, is the steering wheel. Some owners change it to a sporty one with a smaller diameter. However, it should be borne in mind that driving a car becomes not very comfortable. Therefore, this option for upgrading the steering wheel is for an amateur. In addition, the steering wheel can be covered with leather to make it attractive, but to get a quality result, you will have to visit a specialized service. You can resort to a simpler option - installing a finished cover. The product is quite simply mounted, pulled together with threads, and, if necessary, removed without any problems. When choosing a cover, one should take into account the overall design of the Lada Granta liftback cabin.

Armrest

Another element of the interior that can be improved in the tuning process is the armrest. The choice of this part today is quite diverse, but since such products are mainly made in China, the most negative impressions can arise from the operation of such a product. The fact is that the body of the armrests is made of plastic, which cracks under the influence of the sun. The fastening of the part also leaves much to be desired. When opening and closing, a creak appears, the objects inside ring quite strongly, which also does not give any pleasure. Despite the many shortcomings, the Chinese armrests, if desired, can be modified by eliminating the negative points. To do this, the interior space is lined with dense foam rubber, and the outside of the product is sheathed with any finishing material (fabric, leather, alcantara, etc.).

Backlight

Interior lighting "Grants" liftback looks rather weak. There are several ways to improve the situation, but the most common is the installation of LED elements. To do this, the regular interior ceiling is dismantled and the diffuser is removed. For illumination, they purchase an LED strip for 18 elements, divide it into 3 equal parts and mount it on double-sided tape to the inside of the ceiling. Power is supplied to the tape from the wires led to the ceiling, taking into account the polarity.

Torpedo and dashboard

One of the interior elements that sets the overall aesthetics of the interior is the dashboard. Initially, this detail is made in shades of gray, which clearly does not add beauty to the interior. If desired, the panel can be modified to make it more attractive. Of the tools and materials you will need the following list:

• dye;
• primer for plastic;
• solvent;
• acrylic lacquer;
• compressor.

To repaint individual elements of the tidy, they will need to be dismantled, cleaned and degreased. After the preparatory measures, the primer is applied, and then the products are left to dry. When the material is completely dry, start applying paint with a compressor. For the purposes under consideration, you can also use a paint brush, but the quality of the coating will leave the best. The best option is to purchase paint in an aerosol. Apply the paint material carefully so that smudges do not appear. After the paint has dried, the parts are covered with acrylic varnish and left to dry, then they are assembled. The torpedo itself, if desired, can be dragged with modern materials, for example, alcantara, carbon film, etc.

The Grants tidy in the liftback body is equipped with LEDs, but in terms of their light output they cannot be compared with foreign cars. To increase the brightness, standard LEDs are replaced with more powerful ones, the choice of which is quite diverse today. Such changes will make the panel brighter, which will positively affect the attractiveness of the interior and the mood of the owner.

Noise isolation

To increase the level of comfort, some motorists carry out additional soundproofing of their car, since regular processing is not enough. For a quality fight against extraneous noise, it is necessary to perform a comprehensive soundproofing of the cabin, i.e., process the doors, floor, engine shield, ceiling with special vibration and sound-absorbing materials. The first include Vibroplast, Vizomat, Bimast, and the second - Isoton, Accent.

For processing, it is necessary to completely disassemble the interior, that is, remove the seats, dashboard, trim and apply a layer of vibration isolation on bare metal, and sound-absorbing material on top of it. After coating the metal, the interior is assembled back.

Video: soundproofing "Grants" liftback

Additionally, you can cover the bottom of the car from the outside with bituminous mastic, reducing the level of external noise and at the same time protecting the metal from corrosion.

Additional upgrade

Salon "Grants" liftback can also be improved by replacing the headlining, door linings and flooring. This process, as well as car tuning in general, involves considerable financial investments. For such a modernization, it will be necessary to dismantle the elements that are planned to be modified, and then drag them with any modern material.

As for the seats, they can also be re-upholstered with a change in the design of the frame, for example, with sharpening for sports. But this requires not only appropriate materials, but also knowledge. An easier option is to purchase covers, the choice of which today is able to satisfy almost every car owner.

If the chairs for one reason or another have become unusable, then a complete restoration or replacement is indispensable. To increase the comfort of the rear passengers, headrests can be installed in the back of the seats, with which some Grants liftback models are not equipped. To do this, they purchase the head restraints themselves, fastening to them, dismantle the rear seatback, drill the necessary holes and carry out installation.

rear shelf

Improvements to the rear shelf may be required in several cases:

• speaker installation;
• elimination of "crickets";
• finishing.

In the first case, the shelf must be dismantled, holes made according to the size of the dynamic heads and fixed.

To eliminate squeaks, Madeleine is used, which is glued along the perimeter of the fit of the shelf to the plastic side elements.

As for the finish, Carpet is most often used for the rear shelf. If you wish, you can fit it with any material by analogy with other elements of the cabin.

Trunk

One of the disadvantages of the luggage compartment is that during periodic loading, the mat is pressed into the spare wheel niche, and in the absence of the latter, it completely falls into it. To improve the situation, car owners modernize the trunk by installing a hard plywood bottom, followed by sheathing with leatherette or other materials.

Lighting system

Automotive optics is not complete without tuning. The easiest option is to install cilia on the headlights.

Cilia are a plastic part that is mounted on the top or bottom of the headlight.

Eyelashes are mounted on a special sealant or double-sided tape. Even installing such a simple element allows you to transform a car, making it more attractive. Improvements to the lighting system also include the installation of fog lights, since they are not included in the basic configuration of the car in question. Under the fog lights in the front bumper, holes are provided, covered from the factory with plastic plugs. Installing additional optics will not be superfluous at all, since it improves the illumination of the roadside and the road section directly in front of the car. Installation of fog lights is quite simple and almost every motorist can handle it.

If the installation of cilia and additional headlights seems insufficient to you, you can completely change the head optics. In this case, regular lighting is dismantled, and xenon or bi-xenon lenses are introduced instead. Such equipment in the kit has an auto-corrector of headlights and washers. Adjustment work is best done on special stands. Xenon lighting will allow you to replace only the dipped beam, and bi-xenon - near and far. The advantage of installing such equipment is a better ability to illuminate the road at night and in wet weather.