Toyota engine oils. Toyota engine oils Composition and physical characteristics

Toyota engine oils. Toyota engine oils Composition and physical characteristics

24.09.2019

TOYOTA CVT Fluid TC- this is the highest quality original oil for CVTs of Toyota cars. Satisfies all the requirements for technical fluids of CVT gearboxes installed on Toyota vehicles. Suitable for Toyota, Daihatsu, Lexus with CVT. Check with the vehicle manufacturer before using the fluid.

Benefits of TOYOTA CVT Fluid TC

1. Excellent viscosity-temperature characteristics. The product ensures smooth operation of the variator even at low negative temperatures. However, when using the vehicle in regions with harsh climates, it is recommended to switch to a similar Toyota CVT Fluid FE product. This product is intended for regions with the lowest ambient temperatures.

2. Efficient torque transmission. Excellent lubrication of parts.

3. Protection of variator parts from wear. Extending the service life of the V-belt mechanism.

4. Highly effective detergent additives that ensure the cleanliness of automatic transmission parts.

Oil TOYOTA CVT Fluid TC dyed red. This is just a special dye that informs us that the fluid is a transmission fluid and is intended for automatic transmissions.

Analogs TOYOTA CVT Fluid TC

As mentioned above, oil can be used in especially cold regions. Also, oil or can be used as analogues.

By the way, almost all CVTs for Toyota cars are manufactured by AISIN. Accordingly, the liquid for the first filling is also produced by Aisin. Therefore, it is more correct to call AISIN CVT Fluid Excelent oil original, and TOYOTA CVT Fluid TC analogue.

Packing: 4l, 20l.

Characteristics of TOYOTA CVT Fluid TC

Parameter name Method of determination actual value
Density at 20 C, kg/cu.m. GOST 3900-85 870
Kinematic viscosity at 40 C, cSt GOST 33-2000 35,4
Kinematic viscosity at 100 C, cSt GOST 33-2000
Viscosity index GOST 25371-97
Flash point, С GOST 4333-87 198
Pour point, C GOST 20287-91 -50

Article: 08886-02105
Packing type: canister, metal.
Quantity per box: 6 pcs.

Made in Japan.

Data for transport companies:

Approximate weight of goods with packaging: 4 kg
Approximate volume of goods with packaging: 0.02 m3

2. When draining the oil through the sump plug, only half a liter of oil was drained. The mechanics shrugged their shoulders and added 3.5 liters, and incorrectly, and incorrectly controlled its level after that. This led to the overflow of the box crankcase with fatal consequences. Giblet damage, pump seals, etc.

And here's the thing.

A tube is put on the inner pipe of the drain hole from the inside; it does not allow the oil to be completely drained when the drain plug of the pan is unscrewed. That is, the oil changes only with the removal of the pan.

There is no dipstick on the box, and the level is measured in the same way as on a manual transmission along the bottom edge of the hole. The figures filled the extra 3.5 ... 4 liters of oil and measured it through a completely left hole, which is not intended for this.

And the box was coming kirdyk.

How to change the oil is shown in the photo below.

Engine compartment Belta, СVT - K410.

It's not that hole.

From the back of the box, it's not it either.

This is also not it, but crankcase ventilation, do not try to open it and use it to fill oil.

And here is an enlarged photo. Just under this ventilation plug there is an oil filling hole. And to control its level.


The bottom hole circled with a small circle.

Bottom view of the deck.

All work on the removal and installation of the pallet must then be carried out very carefully.

Here it is this ill-fated pipe. On the photo below.

That is, the cork is unscrewed, but the tube remains, only 500 ml is drained, and then the mechanic has a stupor ...

This cant is valid for the following transmissions. As I understand it, a service bulletin came out of the dialogue, the number of which is not given, which describes this jamb, and also describes the oil used. (???) The author also recommends changing it completely every 40 thousand, or 25 thousand. in harsh conditions, referring to the bulletin.

Main application

Oils for cars

The use of oils is a necessity that is dictated by the laws of physics. Oils are used in various car mechanisms and it is important to understand that the oil that is suitable for one node cannot be used for another, so by understanding where and how this or that oil is used, you will extend the life of the car mechanisms. This characteristic shows where this oil is used.

Toyota, Daihatsu, Lexus

It is no secret that major automakers set their own tolerances and requirements for motor oils, as well as give recommendations for the use of certain oils. Here are the brands of cars that gave the go-ahead for the use of this oil in the nodes of their cars. However, this parameter is more introductory, it is better to choose oils according to tolerances.

Manufacturer approvals - list

no information

Car manufacturers often improve their engines, and as a result of existing standards, it becomes insufficient, so the largest car brands issue their tolerances for the content of various elements in oils. This criterion is very important to take into account, since the tolerance may impose more stringent requirements on the chemical composition of oils than the existing standardization.

Made in

Japan

Oils for cars are produced in many countries of the world, our catalog contains oils from all over the world from Russia to the USA. Very often, the country of origin directly affects the quality of the oil. For example, for Japanese cars it is better to buy Japanese oil, for German cars - German.

Brand

TOYOTA

At the moment, our catalog contains more than 100 oil manufacturers, so there is plenty to choose from - these are both newcomers to the motor oil market and recognized market leaders. Many brands of cars require oil from certain manufacturers, so you need to take this parameter seriously.

Where applicable

Transmission oil

Oils are used in almost all vehicle mechanisms and, depending on the scope of their application, they have their own additives, have different viscosities, and indeed have completely different properties. For example, motor oils have a lower viscosity than gear oils. It is very important to know where the oil is applied before pouring it into any other part of the car.

type of product

Synthetic

This is the type of oil, or rather its base - for example, it can be synthetic or mineral oil, this characteristic directly affects the properties of the oil and you need to consider which oils are suitable for your car. Mineral oil is less stable than synthetic oil and has a higher volatility. There is also a semi-synthetic oil - these are 3 main categories.

Engine types

4 stroke

In the process of development of the automotive industry, various types of engines have appeared - most often these are two and four-stroke engines. Each type of engine presents its own characteristics to the composition and characteristics of the oil, depending on the characteristics of its operation. It is better to start by clarifying what type of engine you have and if it does not match the one described above, you need to choose another oil.

Applicable for fuel types

gasoline / diesel / gas / biofuel

It's no secret that depending on the fuel on which the car runs, the internal structure of the engine changes, and therefore the requirements for oils change, as well as the requirements for additives. This characteristic describes for which engines the oil can be used. There are oils that are designed specifically for diesel or specifically for gasoline, and there are also universal oils that can be poured into both gasoline and diesel cars.

Vehicle manufacturer specifications

Toyota CVT fluid TC

Car manufacturers periodically release specifications for their engine oils and the companies they partner with.

Synthetic

At the moment, there are several main types of oils - these are synthetic, semi-synthetic and mineral. Each of these types differs from the other two not only in the method of production and raw materials, but also in its characteristics and their stability. Semi-synthetic and mineral - have a mineral base, that is, they are obtained from products of natural origin, and synthetics are synthesized from chemical. substances.

Packing volume

4 l.

This characteristic shows the volume of oil. When choosing the amount of oil, you need to look at how much oil you need to fill in the engine of your car. We recommend taking a little more oil, as many cars begin to "eat oil" over time, in which case the oil must be added. In addition, it is better to let the oil remain than not enough.

Available volumes

20

Now automobile oils are produced in various volumes - from liter bottles to barrels, with a volume of 208 liters. Naturally, the larger the volume, the cheaper each liter of oil is. Therefore, if you know that you need 4 liters of oil for maintenance in the car, then it is more profitable to buy a 4 liter canister than 4 bottles of one liter each.

original name

Transmission oil TOYOTA CVT Fluid TC

The names of oils on our website and from the manufacturer may not differ significantly. This property shows the original name of the engine oil, that is, what it is called on the manufacturer's website. Very often, the names differ by one letter or number, so we recommend that you be careful when choosing an oil and always check the names if you are looking for a specific oil.

Composition and physical characteristics

Product color

Red

The color of the product is an important chemical indicator. The original engine oil most often has a golden color with good transparency. At the same time, original oils do not have any foreign objects in their volume. The oil should be of a uniform color without inclusions of a foreign color. It is worth noting that engine oils from different manufacturers may vary in color.

Pour point, hail

-55

From the basics of physics, it is known that temperature is a measure of the mobility of molecules. Therefore, the lower the temperature, the lower the speed of movement of molecules in the oil. Pour point - shows at how many degrees Celsius the oil loses its mobility. This characteristic is important for the northern regions, in which the temperature drops to -40 or -50 degrees.

Average value for oils TOYOTA- -40.38

Flash point, deg.

>175?

This is the lowest temperature at which vapor from condensed oil can flare up, and the flash must be intermittent after the source is removed, that is, it does not continue to burn, but goes out. At the moment the source is brought to the vapors, the oil mixed with air rapidly burns and is accompanied by a glow.

Average value for oils TOYOTA- 187.65

Appearance of oil, grease

transparent

Most often, the oil or grease has a transparent appearance, golden in color, however, various variations are possible here. By appearance, you can even determine the presence of certain additives in the oil, and some auto mechanics who very often deal with oils can even determine the manufacturer and originality of the oil. The oil should not contain uneven turbidity and, moreover, should not contain foreign inclusions.

TOYOTA CVT Fluid TC- this is the highest quality original oil for CVTs of Toyota cars. Satisfies all the requirements for technical fluids of CVT gearboxes installed on Toyota vehicles. Suitable for Toyota, Daihatsu, Lexus with CVT. Check with the vehicle manufacturer before using the fluid.

Benefits of TOYOTA CVT Fluid TC




1. Excellent viscosity-temperature characteristics. The product ensures smooth operation of the variator even at low negative temperatures. However, when using the vehicle in regions with harsh climates, it is recommended to switch to a similar Toyota CVT Fluid FE product. This product is intended for regions with the lowest ambient temperatures.

2. Efficient torque transmission. Excellent lubrication of parts.

3. Protection of variator parts from wear. Extending the service life of the V-belt mechanism.

4. Highly effective detergent additives that ensure the cleanliness of automatic transmission parts.

Oil TOYOTA CVT Fluid TC dyed red. This is just a special dye that informs us that the fluid is a transmission fluid and is intended for automatic transmissions.

Characteristics of TOYOTA CVT Fluid TC



Parameter name Method of determination actual value
Density at 20 C, kg/cu.m. GOST 3900-85 870
Kinematic viscosity at 40 C, cSt GOST 33-2000 35,4
Kinematic viscosity at 100 C, cSt GOST 33-2000
Viscosity index GOST 25371-97
Flash point, С GOST 4333-87 198
Pour point, C GOST 20287-91 -50



Article: 08886-02105
Packing type: canister, metal.
Quantity per box: 6 pcs.

Made in Japan.


© 2023 globusks.ru - Car repair and maintenance for beginners