Renault is known all over the world, the French automaker for more than a century. During its history, it has managed to go through a lot, including wars and the post-war crisis, and today Renault Group is the largest auto giant, whose cars are delivered to more than 200 countries. Thanks to a mutually beneficial alliance with Nissan, the corporation ranks fourth in the world in car production.
The country manufacturer of Renault cars is France, while the scale of production in the last century went far beyond the borders of the homeland. Reliability combined with an affordable price and continuous improvement are the main components of Renault's success, these principles have been adhered to by the company since its inception.
origins
The birth and successful development of the brand is due to Louis Renault, who founded the Renault Freres company back in 1898 with his brothers. Already after two years of the company's existence, production volumes increased so much that it was necessary to involve more production lines in the assembly, then an agreement was signed with a Belgian plant, which began to assemble French cars. In addition to the production of serial cars, Renault was also engaged in the creation of sports cars that took part in races and brought many victories. The constant development of the company and compliance with the needs of the consumer of that time made it possible to stay afloat during the First World War. Taxi model Renault Taxi La Marne was even erected a monument for the prompt transportation of soldiers to the Marne River in 1914, thanks to which the French were able to win and prevent the German troops from capturing the capital. In addition, for the army, Renault Freres produced aircraft engines and ships, and a tank was also designed.
Renault showed the world not a single iconic car and each of them has its own history. By 1929, the automobile brand was represented in 49 states, which for that time was considered a huge achievement.
World War II caused serious damage to Renault Freres - as a result of the fighting, several factories were destroyed, Louis Renault himself was accused of assisting the Nazis and arrested, and he died in October 1944. After the war in 1945, the company was nationalized by the French government and became known as Renault. Factories were reconstructed, and Renault cars continued to improve and conquer countries in different parts of the world, receiving numerous awards and universal recognition.
Today, the products of the Renault automotive corporation are very popular, including in Russia, where the production of cars of this brand is actively underway. Renault Brothers' cooperation with the Russian Empire marked the beginning of a long friendship that has continued throughout the history of Renault, despite neither government reforms nor changes in power in the company.
The business started by 3 brothers in France in 1899 turned into a very profitable business decades later, and now Renault is the 4th largest car manufacturer in the world thanks to its partnership with Nissan in the form of the Renault-Nissan holding company, and today Renault cars are assembled in different parts of the world on different continents. There are Renault assembly plants in Russia, and not even one, because the brand is very popular in our country.
In Russia, Renault is represented by a subsidiary of Renault-Russia (known as Avtoframos until 2014), which began its work in our country in 1998. Renault-Russia, thus, also represents its own car plant, which is actually a joint venture with the Moscow government. Here, several of the most popular Renault models among Russians are assembled at once. In addition, Renault cars are also assembled at the AvtoVAZ plant - Renault owns a 25% stake in the largest Russian automaker.
Thus, among the largest car factories where Renault is produced and assembled, the following should be highlighted:
- The Romanian plant produces cars mainly for the entire European market. Romanian-assembled Renault cars can also be found in Russia.
- AvtoVAZ - cars for Russia are assembled here.
- Renault-Russia automobile plant near Moscow - the assembly of most Renault models is established here, and this is the largest supplier of finished cars to Russia
- A car factory in Brazil - from here cars of the brand do not reach Russia.
- Indian Automobile Plant - Renault production is established here for the domestic market, as well as for a small number of countries in Asia and Africa.
So, now let's find out where Renault cars are assembled directly by model.
Where is Renault Logan assembled?
The most popular Renault car model in Russia, Logan, has won such a status for itself, largely due to its low cost and overall price / quality ratio as an excellent alternative. The inexpensive price for Renault Logan, in turn, is a consequence of the almost full-cycle Russian assembly of the model at two car plants at once: at the Renault Russia plant near Moscow and at AvtoVAZ.
As for the build quality and which Renault Logan build is better, this question is wide open - only Logans of the 2014 generation are assembled at AvtoVAZ, and in Moscow the model is assembled much longer. In addition, the assembly cycle is deeper precisely in Moscow - only panels and assemblies come here, and welding, direct assembly, as well as painting are already done in Russia. However, despite such a difference in assembly processes, the shortcomings of both assemblies are almost the same: squeaks and uneven gaps between body parts, although such shortcomings manifest themselves, of course, not on all Logan cars.
Where is Renault Sandero assembled?
Another well-selling car in Russia - Renault Sandero and its "big brother" - Sandero Stepway, began to be sold in our country in 2009; and immediately Russian assembly. At the Avtoframos plant, now Renault Russia near Moscow, an almost complete assembly cycle of Renault Sandero cars has been established.
Where is the Renault Duster assembled?
And here is the most popular and one of the most inexpensive (perhaps the most inexpensive among non-Chinese and non-Russian crossovers) crossover and the best-selling Renault SUV not only in Russia, but throughout the world. No wonder the car is assembled at all major Renault car factories, including factories in India, Brazil, India and others.
In Russia, Renault Duster is assembled at the same Renault-Russia plant near Moscow. Its conveyors are designed to produce more than 150 thousand cars per year, fully meeting the demand for the model in our country and even neighboring countries.
Where is Renault Megane assembled?
The oldest model of the company, Megan, has been satisfying car enthusiasts in our country since 1996, when the car replaced the outdated Renault 19 model. Since then, the car has gone through three generations and even more restylings, and this model was assembled everywhere! But let's go in order.
The first generation of Megan was a "purebred" Frenchman - a car for Russia was assembled at the Douai car plant in northern France. In addition, for some other markets, the first generation Renault Megan was also produced in the Spanish city of Palencia. And since 2002, the second generation of the car saw the light. At first, the car was produced simultaneously in three countries: a sedan in Turkey, a station wagon in Spain, and hatchbacks all in the same France, but then, after the redesign, Renault cars were assembled in Turkey - at the Oyak-Renault car plant near the city of Bursa. It was from that moment until 2011 that Megan was delivered to Russia, assembled in Turkey. The third generation was also assembled in Turkey and for some time in Russia - from 2012 to 2013 - at the Avtoframos plant. And, starting in 2014, after restyling the third generation, Megan again began to gather in Russia near Moscow.
Where is Renault Fluence assembled?
One of the youngest models on the Russian market and in the whole world, Renault Fluence, first saw the light in 2009, but the Russians first got acquainted with the model in 2010, when its production was launched at the car factory, which was then called Avtoframos "(now Renault-Russia). In addition, almost simultaneously with the sales of Russian-assembled Fluence, cars began to be imported to Russia and from Turkey, where they were assembled at the Oyak-Renault automobile plant. And in 2013, after restyling, Fluence for Russia is also assembled in South Korea at the Renault plant.
Table: Where are Renault models assembled?
| Renault model | Assembly country |
|---|---|
| Clio | France, Turkey (since 2012) |
| Duster | Russia (Renault Russia) |
| Escape | France |
| Fluence | Russia (Renault Russia), Turkey, South Korea (since 2013) |
| Kangoo | France |
| Koleos | South Korea |
| Laguna | France |
| Latitude | South Korea |
| Logan | Russia (Renault Russia; since 2014 - at AvtoVAZ) |
| Master | France |
| Megane | France (1996-2002), Turkey (2002-2014), Russia (Renault Russia 2012-2013 and 2014-2015) |
| Sandero | Russia (Renault Russia) |
| Scenic | France |
| symbol | Turkey (since 2006), France (1998-2002) |
Many car enthusiasts often wonder where Renault is produced, where the factories operate, how do they work? The history of the emergence of Renault dates back to 1899, when three brothers decided to start car production in France. Since then, much has changed, the company began to bring significant profits. Today, Renault is the fourth largest vehicle manufacturer worldwide thanks to its partnership with Nissan. The formation of the Renault-Nissan holding has become a new stage of rapid development for the company; today branded cars are produced all over the world. There is a Renault car assembly plant in the Russian Federation.
So where are Renault cars made today? In our country, the Renault auto concern is a subsidiary called Renault Russia, which has been operating since 1998. Renault-Russia is a car assembly plant, which is a joint venture with the Moscow government. Here, the assembly of the most popular among the citizens of Russia models of the French company has been established. In addition, Renault vehicles are produced at the AvtoVAZ automobile plant, since Renault's management owns twenty-five percent of the shares of Russia's largest car manufacturing plant. The largest factories that assemble vehicles under the Renault logo include:
- The main plant is located in Paris. From here the vehicles are distributed all over the world.
- Romanian plant. In Romania, where Renault is produced for almost all of Europe, there is one of the largest car factories.
- AvtoVAZ - Russia.
- One of the largest automakers of almost all Renault models is Renault Russia, that is, an enterprise located near Moscow. This plant supplies finished machines throughout Russia.
- The car factory in Brazil also provides the population with vehicles of the Renault brand.
- The Indian plant produces ready-made models of machines that are supplied to the domestic market of the country and assembled for the markets of Asia and Africa.
There are a huge number of enterprises owned by the Renault-Nissan concern that assemble high-quality vehicles with the company's corporate logo. So, now you need to decide who collects Renault Logan, Renault Megan and other Renault models.
Logan is considered one of the most popular models of Renault cars in Russia. This car won the hearts of drivers due to its low cost, quality-price ratio, as an excellent alternative to the domestic auto industry. The affordable price of this vehicle is explained by the full-cycle assembly of the model at two factories in Russia at once, namely: Renault Russia and AvtoVAZ. As for the build quality of the model and which one is better, this question remains open. At AvtoVAZ, cars of the 2014 generation are assembled, but at Renault Russia, newer cars are produced, but the assembly takes much longer.
The factories where Renault Logan is made differ in their assembly cycle. It is the Moscow enterprise that has a deeper cycle, only components and panels come to the plant, therefore, welding procedures and direct assembly are carried out by Russian designers. Also, the specialists of the plant produce car painting. Regardless of the place of Russian production of Renault Logan, almost all cars have the same flaws. Both assemblies have creaks during operation, uneven gaps between body parts, and many other problems. But such disadvantages are not found in all Logan cars.
Where is Renault Sandero produced?
Many drivers are interested in the question of where Renault Sandero is made, because this model is well-known among Russian motorists. Renault Sandero, its restyled version of the Sandero Stepway, has appeared on the Russian market since 2009, and immediately won the hearts of drivers. Interestingly, these two models were originally assembled in Russia. At the main Russian plant of the Renault concern near Moscow, Renault-Russia, today a full cycle of production of a vehicle of this model has been established. All cars after their assembly are of high quality, they have different equipment and a wide variety of colors.
Assembling the Renault Duster
One of the most inexpensive and popular crossovers, not Chinese, but Russian-made, is the Renault Duster. To understand where Renault Duster is produced, you need to familiarize yourself with all Renault factories, because due to its popularity among drivers, this SUV is produced all over the world. The car is assembled in almost all countries where there are large factories. In our country, this model is produced at the Renault-Russia plant near Moscow. Designers assemble more than one hundred and fifty thousand vehicles annually, which fully meets the demand of consumers for the model in Russia and neighboring countries.
Renault Megane production
This model is perhaps the oldest of the entire Renault range, its production began back in 1996. Many do not know where Renault Megan is made today, however, this issue must be approached with a certain order. So, the first Megan was released in France in the nineties, it was a replacement for the outdated Renault 19 model. Since then, the car has gone through three generations and many restylings. Today, Renault Megane is produced at all plants of the holding, namely, in Spain, Turkey, Russia, India, France and others.
Where is Renault Fluence assembled?
Renault Fluence is Renault's youngest model and was first seen on the international market in 2009. Fluence went to Russia for almost a year, its release was launched in the Russian auto industry in 2010. Now, Fluence in Russia is assembled in the same place where Renault Logan is produced, that is, at the Renault-Russia automobile plant. Simultaneously with the release of the Russian-assembled Renault Fluence, the country's market began to fill with vehicles of this model from Turkey, South Korea and France. For a short time of its existence, Fluence fell in love with domestic drivers and became one of the favorite and best-selling models.
The Renault-Nissan holding is very popular all over the world, thanks to the well-coordinated work of subsidiaries that produce high-quality Renault vehicles. All car factories where Renault Logan, Stepway, Megan, Fluence, Logan are produced are equipped with the latest technologies, so that all cars produced meet high standards.
Currently, the production of not only simple products, but also technically complex products is being established in Russia. An example is the Renault-Russia automotive production plant, where cars of the same brand are assembled - Fluence, Logan and many others.
Brand history
The production of Renault car brand products dates back to the end of the nineteenth century. Started in France from scratch, the business has since grown to a global scale. Now Renault ranks fourth in the world in the production and sale of its cars. The company was able to achieve such heights by teaming up with another, no less famous giant, Nissan.
As you know, many critical components in Renault cars were released under the auspices of Nissan. For example, when assembling a Fluence model at the factory, a Nissan CVT gearbox is automatically installed on it.
Such mutually beneficial cooperation allows the company to develop very quickly, and now cars under the Renault brand are assembled in many countries.
History in Russia
Russia was no exception. Fluence assembly began in 2009 abroad, in Turkey, at the Oyak-Renault plant, but at present, the production of this model for the Russian market is located in Moscow, and until 2014 it was called Avtoframos. Now this company is already known under a different legal name and is called Renault-Russia.
It is impossible to visually distinguish the Turkish and domestic assembly for the simple reason that there are no external differences. However, in technical terms, there are several provisions on which foreign and domestic cars differ.
The clearance of the Turkish model is only 12 cm, while the model of the Russian assembly boasts 16 cm.
This is done with the expectation of our road conditions. For the same reason, you can find differences in the suspension settings, which in Fluence of the Russian assembly is more energy-intensive and works out all the defects of the road surface without damage. From the reviews of the owners, you can find out that the quality of Turkish plastic in the cabin is better, but this has not been officially confirmed, so you cannot be completely confident in such statements.
The scale of production capacity is impressive. Not so long ago, the 100,000th Duster SUV rolled off the assembly line. Fluence is also a popular model among Russian consumers. The number of production of models of all types almost reaches two hundred thousand units a year, and the total piece expression of assembled cars has already exceeded one million.
Not everyone knows that the production of Fluence and other models is located not only in Moscow.
Renault cars are also assembled at the Avto-VAZ enterprise. This became possible due to the acquisition by Renault of a 26% stake in Avto-VAZ.
Since the car is a source of increased danger, the company's management applies special requirements to the quality of the assembly of its products. The plant constantly conducts mechanical strength tests, electronic testing of equipment, which make it possible to understand the compliance of auto products with all quality and safety requirements.
The class of all produced models, including Fluence, is budget, so many stages of production are based on manual labor, unlike premium cars, the assembly of which is completely entrusted to robots.
Production has its own interesting feature. It is known that in the assembly process, starting from the initial stage, the workpiece, which in the future should become a full-fledged car capable of movement, travels a considerable distance, having visited different workshops. All this time, there is a small container next to the car, in which many different parts are placed, designed specifically for this car.
This is how Fluence and other models are assembled. This method is designed to save time for workers and, accordingly, increase the volume of products.
Summarize
Some people are suspicious of automotive products manufactured in Russia. The reason for this is the AvtoVAZ models, which do not always show their best side. However, Renault, despite its Russian roots, still meets all quality standards and the proof of this is its popularity among taxi services, for which the main criterion is a decent car resource.
R enault Fluence was officially presented to the public in August 2009. The car was intended to replace the three-volume hatchback (notchback) Megane II in those markets where this car was sold. However, given that this version was not in great demand, it was decided to build a classic sedan on the Renault / Nissan C platform. And to make the car more attractive, increase the wheelbase to 2,700 millimeters and make it large enough, closer to the dimensions of D-segment cars.
Renault Fluence" 2009–12
By the way, three months earlier, the premiere of the same car, bearing the Renault Samsung SM3 nameplate, took place in Seoul. The fact is that Renault Fluence was developed by an international team of engineers of the Renault-Nissan alliance as a global car, and the team of Korean designers took an active part in this work. The result is a true child of globalization, destined for sale in more than 80 countries. Well, since the car was designed as “comparable in comfort to the D-segment, but affordable”, it was unified as much as possible with other models, including previous generations. So, the Megane III platform was combined with power units from Megane II and the rear suspension from Nissan Sentra, and the climate control, steering wheel and front panel design were unified with Megane III and Laguna III.
Initially, the production of Fluence was launched at the Oyak-Renault plant in the Turkish city of Bursa, then the conveyor in the city of Santa Isabel (Argentina) started working. Soon, a SKD assembly was set up at the Avtoframos plant in Moscow, which was replaced by full-cycle production in 2010. A factory in Busan, Korea, was responsible for cars for Asian markets.
Renault Fluence" 2009–12
The range of engines that Renault Fluence was equipped with cannot be called particularly wide. It included gasoline engines of 1.6 and 2.0 liters with a capacity of 106 to 140 hp. There was also a 1.5-liter turbodiesel in four versions, capable of delivering from 85 to 110 hp. They could be paired with five- and six-speed manual gearboxes, a classic four-speed automatic, a CVT and a dual-clutch robot. However, in some markets - for example, in Argentina and Brazil, a sports version of the Fluence GT was also offered, equipped with a two-liter 180-horsepower Renault TCe 180 engine in combination with a six-speed manual.
Sales of Fluence in Russia started in 2010. Initially, versions were offered with a 1.6-liter K4M engine with 106 hp, paired with either the classic four-speed automatic transmission DP0 or JR5 manual transmission. Later, buyers were offered a more powerful version with a two-liter M4R engine, aggregated with an FK0 variator or a TL4 manual gearbox.
In 2012, Fluence underwent a major facelift: its appearance was brought into line with the new corporate style, xenon headlights, a USB port in the audio system and standard daytime running lights appeared. The updated model was presented at the Istanbul Motor Show, and its production at the Moscow Avtoframos plant began in April 2013. In addition, the 1.6-liter H4M engine with 114 hp has replenished the range of power units. paired with a DK0 variator.
Renault Fluence" 2009–12 Fluence sales developed quite successfully: in terms of the price of basic configurations, the model competed with mass cars of the B + segment, and in terms of size, set of options and space in the cabin, it competed with cars not only in the C segment, but also in the D segment. Nevertheless, the crisis affected the popularity of Fluence in the most devastating way: in 2015, only 1,408 Russian buyers chose this sedan, and in March 2016, Renault management decided to stop production of the model in Moscow and withdraw it from the market.
Yet Fluence still makes up a significant share of the passenger car fleet and is present on the secondary market, although its liquidity is estimated to be low. Why? First of all, due to a number of contradictions inherent in the model, the ambiguity of the assessment of many of its qualities by the owners and the overall image of the brand. Owners really evaluate Fluence in very different ways, and this applies to both the model as a whole and its individual characteristics. So why is Fluence loved and hated? It turned out to be quite difficult to answer this question, since we had to exclude from the story those qualities that caused diametrically opposite reactions, and leave only those in which the owners showed sufficient unanimity.
Hate #5: "The French are so entertaining..."
French designers have always been distinguished by a certain originality of their decisions. Sometimes these decisions turned out to be successful, sometimes not so much, but any such decision required time to get used to it. Fluence is no exception in this regard, and it's good that the horn switch is located in the usual place for us, in the center of the steering wheel, and not at the end of the steering column switch.
Renault Fluence" 2009–12 But the originality of the steering column joystick with many audio control buttons, which you need to blindly press, since the joystick is completely hidden by the steering wheel spokes, is noted by almost all users. Someone writes that he could not get used to it, someone - that over time he got used to it and even began to consider it very convenient, but this does not change the situation. The control of the hands-free system is also located there, and it is completely incomprehensible why the “pause / receive a conversation” was done with a second delay. The reviews write that at first it simply introduces into a stupor.
On the radio itself, to switch to the next track, you need to press the arrow pointing back, and the previous one - forward.
Another strange decision is the placement of the front seat heating control buttons in their lower part. Someone even writes that if the designers put these buttons under the seats, it would still be more convenient. Well, at least there is an indicator of the heating operation on the front panel. True, he is alone for two, that is, for the driver and passenger, and the person sitting behind the wheel cannot always understand whether he pressed the key badly, or the front passenger who left left his seat in heating mode.
There are questions about the coasters. There are two of them, but you can really use only one - at least if you want to put a bottle of water there. Putting the second one will prevent the manual gearbox shift lever or the machine selector.
Extreme irritation is caused by the fact that the central deflectors of the ventilation system do not have a damper blocking them. The side deflectors have such shutters, but the central ones do not! That is, if you want the cold air not to blow on the child riding behind, you just have to turn off the air conditioner. And to direct the flow of cold air so that it does not blow in your face, you will not succeed either. This is especially true for drivers with growth below average.
There are certain oddities in climate control. So, behind the rightmost “twist” you can’t see the direction of the air flow, plus it’s impossible to direct all the airflow to the windshield without turning on the air conditioner.
Renault Fluence" 2009–12 Finally, many want to look into the eyes of the person who designed the hood latch. Although, to the credit of the French engineers, you do not have to open the hood too often, but even experienced owners complain that they are looking for the lock lever every time for several minutes.
Love #5: "Full stuffing!"
Many owner stories on the Internet begin in a very similar way: there was a certain amount of money, they chose a car, they asked the price of many models, at first they didn’t even look at Renault. And then we saw Fluence in the salon, got acquainted with the equipment - and that's it, we left already on this car. Because in no other car for 600 thousand rubles (I remind you that we are talking about pre-crisis prices) it was impossible to find keyless entry, engine start from the start / stop button, a cooled glove box, xenon headlights and light and rain sensors. For example, the Expression package included six airbags, a start-stop button with a hands-free card, heated seats and mirrors and power side mirrors, fog lights, a standard four-speaker audio system, dual-zone climate control, retractable rear sunshades ( such luxury and not all models of premium brands offer), leather-trimmed steering wheel and gearshift lever, driver's seat with adjustable height and lumbar support and steering wheel with angle adjustment.
Renault Fluence" 2009–12 Well, the overall design of the cabin ... Special approval was given to the "lunar" illumination of instruments and controls. There were cases when people seemed to have already chosen another car, but when they saw how the Fluence was illuminated inside, they bought this model.
Many note as a significant plus the presence of a timer for turning off the power of all electrical consumers with the engine turned off, which excludes the discharge of the battery due to forgetfulness. True, this timer will provide some problems for those who like to arrange a disco in nature during picnic trips, but these are already trifles.
A lot of commendable words are addressed to the “hands-free” chip card. Indeed, he approached the car, grabbed any door handle, Fluence unlocked the doors and removed the alarm. Got behind the wheel, pressed the button - and the car started. He drowned out, got out, walked away a couple of steps - and the car itself stood guard. No bunches of keys, no key fobs tearing pockets and forgetting at home, and most importantly - when you come from a store with a lot of bags and packages, you do not need to put them on the ground to press the button on the key fob. What's more, if you left your windows open, the car will close them for you, so you don't have to get back behind the wheel and start the engine. But even now not all representatives of premium brands can boast of such a function!
Renault Fluence" 2009–12 The owners adequately appreciate the adequate operation of the rain sensor, and even those who were previously skeptical of such systems. The owners also like the trim materials, soft plastic on the front panel, and the build quality of the cabin as a whole.
But the Fluence interior after restyling for some reason causes much more criticism: “The plastic of the dashboard visor and doors has become wooden, the cool curtains of the rear window and rear doors have disappeared somewhere. The speedometer has become electronic, which is also an amateur, the seats are different, and the fabric on them is somehow cheap, the headrests have also changed not for the better.
Hate 4: "South Stream Problems"
The name Fluence should evoke associations with a flowing stream. Only here it is felt that this flow is southern ... Indeed, neither France nor Turkey, from where the first cars were imported, can boast of severe winters, so the creators of Fluence simply did not think about a number of aspects of winter operation. No, no one complains about problems with starting the engine at negative temperatures - both at minus 20 and at minus 30, the car starts, albeit not the first time, but quite well, but other problems are big sledges and small sleds.
Firstly, the suspension stiffens in the cold, and extraneous noises appear during its operation: the bushings of the anti-roll bar creak. The sound was heard especially clearly when high speed bumps passed after a night stop.
Renault Fluence" 2009–12 Secondly, the car practically does not warm up at idle - only on the go. Covers made of leatherette for gearshift and handbrake levers freeze and crack. The trunk lock button freezes, and as a result, the trunk may begin to open spontaneously. Freezes the cable backstage KP.
Air exchange is not very well organized: in severe frosts, the windows of the rear doors are almost constantly frosted. But the most unpleasant thing is that this frost is also on the inside of the roof, and in the thaw, thawed condensate begins to drip on you.
It is very difficult to clean the Fluence from snow, but it is necessary to clean it. Otherwise, the snow clogs the niche between the hood and the windshield, the washer fluid will not flow down the chute into the holes for its removal, which means it will impregnate the snow on the chute and be sucked into the cabin with all its poisons, since that is where the air intake is located. But in order to clean this area, you must definitely open the hood, the cover of which prevents you from lifting the wiper blades! Naturally, in this case, the brushes tend to freeze to the windshield: their rest zone is located below the level of blowing the windshield with warm air.
The windshield is generally desperately frosted around the edges, especially from below, since warm air is supplied to it from a deflector located in the center of the upper part of the front panel. The regular brushes themselves deserved only one assessment: “the junk is complete, they tan in winter and only carry dirt over the glass, you need to change it right away.”
Renault Fluence" 2009–12 The situation is no better with the rear window. It is equipped with electric heating, but the power of the heating elements cannot be called sufficient. The heating melts the snow, which in the form of water flows into the gutter between the glass and the trunk lid, where the water freezes safely, and a crust is obtained that increases the size of the trunk lid by almost 5 cm. Then you open the trunk - and this ice crust hits the glass.
However, in winter, such dignity of Fluence is also manifested as a very decent sound insulation: “When the real winter finally began, and the roads were covered with snow and ice, then when the front drive wheels slipped, I inadvertently began to suspect that something was wrong with the clutch, because I did not hear the sound of skidding wheels, nor the sound of snow beating against the arches and the bottom of the car. It turned out that everything is in order with the clutch, it’s just that with the windows closed you can’t hear how the car is slipping. ”
Love #4: "Size Matters"
The creators of Fluence initially tried to make the internal volume of the model its main competitive advantage, and we must admit that they did it very well. As a matter of fact, the statement that the model was chosen because of the spaciousness in the cabin is found, if not in every review, then certainly in the vast majority of them.
Renault Fluence" 2009–12 The interior is spacious - noticeably wider than, for example, in the Mercedes C-class. Its space visually expands the shape of the front panel. You sit freely, nothing presses, you don’t push with your elbows with the passenger. The range of seat adjustment is huge - if you move it all the way back, then you can’t reach the pedals. A child seat fits in the back row and there is plenty of legroom for the child.
There are, of course, some shortcomings: due to the sloping roof, the ceiling will still put pressure on the heads of tall rear passengers, the dashboard is somewhat littered, and the steering wheel covers the upper segment of the speedometer, the central armrest is located 4-5 centimeters lower than I would like to ... But these are trifles that do not spoil the overall picture.
Renault Fluence" 2009–12 But even more delight is the volume of the trunk. It is 530 liters, and it is deservedly called one of the largest in the class. Some of the owners of Fluence carried a gas stove in the trunk (however, it didn’t fit through the opening, and they had to load the stove through the cabin door), someone transported furniture boards 220 mm long, someone settled in the cabin for the night. All this became possible because the rear sofa can be folded, getting a single area with a trunk with a flat floor.
Hate #3: "Watch the loop!"
However, a large trunk is not only good, but also bad. At least sometimes…. In particular, many note that getting something out of the depth of the luggage compartment without leaning on the bumper and without soiling your trousers is almost impossible even for a tall person. In addition, the inner handle on the lid for closing the trunk appeared only after restyling, and before that, the owners were forced to keep a cloth in their pocket to wipe their hands after contact with a dirty body part.
Well, in almost every review there is a mention of "arcs", "sickles" or "skis" - massive loops on which the lid is suspended. These loops not only eat up part of the volume, preventing the transportation of a bulky “mono-cargo” (for example, only because of them a set of 4 regular-size wheels does not fit in the trunk), but they can also damage some fragile thing. As a result, Fluence owners get used to "playing Tetris" and very carefully place luggage. So they are perplexed: well, why couldn’t these loops be made a little smaller and not placed closer to the rear fenders?
Love #3: "I stopped understanding these people..."
French engineers have always been able to create simple, but very hardy and energy-intensive suspensions - just remember Logan, Duster and Kaptur. Fluence is no exception in this regard. Its suspension has a very trivial design: MacPherson struts in front, a semi-independent torsion beam in the back, but absolutely all owners rate it with the highest score. The suspension swallows any obstacles; when driving through large pits, only light shocks reach passengers. There is such a joke among the owners: “I bought Fluence, I stopped understanding people who slow down in front of the tram tracks.” Of course, it is necessary to slow down in order to maintain the suspension, but softness when passing, say, "speed bumps" is guaranteed.
Renault Fluence" 2009–12 The owners note that according to the subjective perception, Fluence is quieter and softer than Renault Laguna - and it was believed that Laguna could compete with Volvo in terms of smoothness! In general, the suspension is both quiet and elastic. In addition, it reacts very neutrally to longitudinal rutting and behaves quite predictably on a snowy road. Just what you need for Russian destinations, where you can find broken asphalt, a grader, and primers.
Well, 170 mm of ground clearance allows Fluence owners to feel very calm when traveling to the country, on a picnic, fishing or picking mushrooms. In the city, you can safely drive up to any curb without fear of hooking it with a bumper, and outside the city, you can drive along a forest road without being afraid to catch on a snag with some part sticking out under your belly.
Hate #2: "We were rocked by the wave..."
However, the suspension that provides a smooth ride, there is a downside. First, it's valkost in turns. Although here, as they say, "the opinions of scientists are divided." Some recognize the presence of roll in corners, but believe that they do not go beyond the permissible limits, since the car remains in control and clearly follows a given trajectory. Others believe that the banks are still too large, and the driver begins to drift sideways in a turn - either towards the door or towards the central armrest.
Many note the tendency of the car to enter the buildup on a gentle wave, and this buildup, in which the body in motion repeats all the bumps in the road, can cause some discomfort: on long trips, Fluence passengers frankly get sick, and, as you know, children suffer the most from this and women.
Renault Fluence" 2009–12 In addition, the soft suspension, combined with very tenacious brakes (we will talk about them a little later), leads to very powerful and sharp dives with every slowdown and situations like “in the first couple of days, the wife nearly broke her nose on the panel.” Well, taking into account too artificial effort on the steering wheel and “swimming” on the road at highway speeds, the collective mind estimates the handling of Fluence very low - a C grade, at best - a four with two minuses.
Love #2: Diamond Anti-Theft
Renault Fluence has one more indisputable advantage, arising, oddly enough, from its own shortcomings and the peculiar image of the Renault brand as a whole (we are only talking about the image within our country). This is an almost complete lack of interest in the car from the hijackers. Statistics say that the risk of theft for this model in 2015-2016 ranged from 0.23 to 1.08%, while, say, for the Audi A8 this figure is 8.5%, and for the Ford Focus - 7, 5%.
Renault Fluence" 2009–12 On the Web, I came across a story about how a person went on vacation, and when he returned, he found that he had not closed the car and forgot the key card inside. The car stood open for two weeks, with the keys inside, and no one was interested! By the way, curious collisions happen with these key cards. The fact is that this device allows you to leave without him, and such a development of events is quite possible: “I started the car, then I went home to change my jacket, and accidentally left the key card in my jacket at home. I arrived at the place, but I can’t turn off the car: it doesn’t respond to the start / stop button, the panel says “I don’t see the key, to turn it off, press and hold the start / stop button”. What to do? I am alone. To mute means not to leave anymore: without a key, it will not start. I had to leave the car running and open for half an hour.” Pay attention: and here no one encroached on the car ...
In general, as was said in one of the reviews, Fluence is equipped with an anti-theft device in the form of a diamond on the hood.
Hate #1: "For those who understand life..."
Yes, most of all critical arrows fly exactly at Fluence's dynamic abilities. It should be borne in mind that cars of this model with engines of 1.6 and 2.0 liters are completely different cars in their nature. Naturally, two-liter versions with a CVT cost significantly more and were sold in smaller quantities. But the owners have almost no complaints about them: the car demonstrates quite acceptable dynamics even with 3-4 passengers on board, a roof box and a full trunk and allows confident overtaking on the track, accelerating intensively even from a speed of 100-120 km / h . The engine is very high-torque and elastic, a confident set of speed is possible in almost the entire rev range, and the engine makes noise only after spinning over 5,000 rpm. The tandem of the variator and the engine in this car is beyond praise.
Renault Fluence" 2009–12 It is only worth noting that the CVT does not like nervous driving, and that it does not actually have a kickdown mode. When you sharply press the accelerator pedal, the variator is in a stupor for a couple of seconds, and in order for the acceleration to turn out to be predictable, you need to press the gas pedal quickly, but smoothly. That's when all 138 horses under the hood without hesitation and buildup will rush to the cherished goal.
And a completely different thing is a car with a 106-horsepower engine. This motor really lacks power, and in many reviews, the owners write that the car "does not drive", especially if you turn on the air conditioner. Versions with a four-speed automatic are especially scolded. Versions with manual transmission are a little more fun, but not by much.
Renault Fluence" 2009–12 The most important and most annoying drawback, which, unfortunately, is rarely mentioned, is the short gears of the JR5 manual gearbox. A comfortable speed does not exceed 110 km / h, because at a higher speed the annoying hum of the engine begins to break through the very good soundproofing of the engine compartment, because 110 km / h is almost four thousand revolutions.
The situation is aggravated to the limit by the electronic gas pedal damped for the sake of the environment. It’s impossible to be nimble in traffic jams: I just aimed to get into the hole, pressed the gas ... And the car thinks, thinks, thinks, as it thought up and went - that’s it, it’s too late, there are no holes anymore ... Because of this very pedal, many write, that subjectively it seems that the engine power is only 70-80 horses, instead of the passport 106.
Indeed, when you press the gas pedal for the first second, nothing happens at all, and then a smooth increase in speed begins. The same thing happens when the pedal is released - for a few more seconds the speed does not decrease, and then a smooth reset begins. The electronic gas pedal is a voltage converter that supplies a linear signal to the switch - that is, regardless of how you press the pedal, the throttle valve opens and closes smoothly, with a second delay, and it seems that the pedal is not connected to the valve by a cable, as on ordinary cars, but with an elastic band. Well, as a result, attempts at energetic overtaking or a sharp start from a traffic light can easily end in an accident.
Renault Fluence" 2009–12 It is worth noting that there are much fewer complaints about restyled versions with a 114-horsepower engine in combination with a CVT. And they write a lot about excellent braking dynamics, corresponding to a much faster car. One has only to take into account that the front brakes are somewhat overbraked in relation to the rear ones (this also affects the difference in wear of the front and rear pads), and the same effect is created as on rally cars with divorced circuits: when braking in a turn, the stern begins to blow.
Love #1: "I don't have a screwdriver..."
Few people associate the image of the Renault brand with the word "reliability". Reliability is the Japanese or the Germans, but here ... Probably, in many heads the memory that some uncle Vasya once told me that his Renault or Peugeot constantly broke down was in many heads ... But the fact remains: the most important advantage of Renault Fluence owners consider it reliable. And these are not empty words.
The owners say that over the years of their joint existence, their favorite cars managed to see perfectly smooth German autobahns, stand in traffic jams at a temperature overboard of about 40 degrees in sunny Italy, drove companies on graders in Karelia more than once, patiently counted the bumps on the roads of Poshekhony killed in the trash. ... In general, they were operated in completely different modes, but without serious breakdowns and other excesses.
Renault Fluence" 2009–12 As a result, many of those who bought Fluence as a pass option for three years began to think about whether such a car was worth selling. Indeed, you won’t get much money for it, liquidity is low (remember about Uncle Vasya and his stories sunk into the soul), and the car regularly performs its functions, doesn’t pull money, doesn’t annoy with breakdowns, and everything else has already become a habit. The 1.6 K4M engine can be considered indestructible and begins to eat up oil at runs over 300 thousand kilometers, the clutch under a normal driver lives up to 200 thousand, the chassis requires intervention at runs of 180-200 thousand, and Fluence repairs are relatively inexpensive. So such cars become family favorites, receiving affectionate nicknames “Flyu”, “Flyunya”, “Flyusha” or “Lucy” ...
Your emotions from Renault Fluence?
