Truck crane Ulyanovsk 25 tons specifications. Truck crane Ulyanovsk

02.07.2020

Salon

Currently, the products of the Ulyanovsk Mechanical Plant No. 2 (UMZ No. 2) are attracting the attention of an increasing number of consumers. This is due to the fact that the equipment of this enterprise, despite its excellent load-altitude performance and quality, has an affordable price. Clear evidence of this is truck cranes ULYANOVETS 25 t, which compete with the more well-known Russian and some foreign counterparts.

Recently, construction equipment with a carrying capacity of 25 tons has been a leader in terms of sales. However, the following trend is observed: consumers often tend to give preference to ULYANOVETS truck cranes, rather than more well-known brands. This is not surprising, judge for yourself, truck cranes ULYANOVETS 25 t reliable, high performance and easy to maintain. Is this not a reason to purchase this technique?

A wide range of truck cranes ULYANOVETS 25 t

As you know, the Ulyanovsk Mechanical Plant No. 2 is engaged in the production of lifting equipment on both caterpillar and wheel tracks. But note the fact that it is the series truck cranes ULYANOVETS 25 t represented by the largest number of models. This is due to increased consumer demand and the ongoing work of UMP No. 2 designers to improve the quality of equipment.

Currently a series truck cranes ULYANOVETS 25 t represents a fairly wide range of models, the representatives of which differ in some features of design and technical equipment. However, it should be noted that with not so significant differences, all ULYANOVETS truck cranes show excellent results. In addition, a large degree of unification of the main crane mechanisms greatly facilitates the maintenance of this equipment.

It is noteworthy that among the large abundance of ULYANOVETS 25 t truck cranes, the consumer will definitely find a model that will fully meet all his requirements. For example, depending on the conditions of the intended operation, you can choose truck crane ULYANOVETS 25 t on an all-wheel drive chassis that will overcome any road difficulties, or more economical, but with less traffic.

Behind the seeming simplicity of ULYANOVETS 25 t truck cranes lies high reliability

Engineers of the Ulyanovsk Mechanical Plant No. 2 believe that the simpler the design, the more reliable it is. This principle is also reflected in truck cranes ULYANOVETS 25 t: there is nothing superfluous in them. In addition, in the production of this equipment, preference is given to domestic parts, due to which the cost is noticeably reduced, and the quality complies with the requirements of the Rules for the Design and Safe Operation of Load-Lifting Cranes.

as a base truck cranes ULYANOVETS 25 t the chassis of URAL, KAMAZ, KRAZ and MAZ trucks is used, which have excellent driving characteristics. Therefore, this technique can be used both in the city and beyond. It should be clarified that many truck cranes from the ULYANOVETS 25 t series have all-wheel drive, which gives them high cross-country ability.

When developing truck cranes ULYANOVETS 25 t the designers took into account that this technique is used to work on dispersed objects. Therefore, all models from the presented series are equipped with capacious fuel tanks from 210 to 350 liters, which reduces the loss of time for refueling.

Truck cranes ULYANOVETS 25 t equipped with YaMZ and KAMAZ engines, the power of which varies from 240 to 250 hp. (depending on the model). The use of modern technologies in the production of the presented automobile cranes made it possible to ensure high interaction between the power unit and other mechanisms, which led to improved performance.

The large working area also has a positive effect on efficiency. truck cranes ULYANOVETS 25 t. A large service area is provided due to the fact that this equipment is equipped with a telescopic boom, which is characterized by high structural strength. The working body of ULYANOVETS 25t truck cranes consists of three sections, and therefore the length can vary from 9.7 to 21.7 m.

Moreover, the length of the boom can be significantly increased with the help of additional equipment. truck cranes ULYANOVETS 25 t light lattice jib, which reaches 6 or 9 m. At the same time, the lifting height of the load and the service area of \u200b\u200bthis equipment significantly increase. Thus, ULYANOVETS truck cranes 25 tons with an extended boom can lift a weight of 1.8 tons up to 28 m, which is a very good indicator.

ULYANOVETS 25 t truck crane mechanisms are controlled by a reliable hydraulic system. So, the extension of the boom sections is carried out using hydraulic cylinders. Hydraulic drive truck cranes ULYANOVETS 25 t ensures smooth and precise performance of work operations with the possibility of their combination and speed control.

Let us clarify that truck cranes ULYANOVETS 25 t capable of raising and lowering loads with the main boom at a speed of 6.5 m / min. However, this figure increases significantly in the presence of a lattice jib (up to 26 m/min). Thus, we can conclude that ULYANOVETS 25 t truck cranes are capable of performing a large amount of work in a short time, which indicates their high productivity.

It should be added that when developing each model in the ULYANOVETS 25 t truck crane series, the designers sought to improve the consumer properties and reliability of this equipment. How they managed to judge you, however, we will give a few arguments in favor of truck cranes ULYANOVETS 25 t:

powerful chassis diesel engines are distinguished by their efficiency;
the telescopic boom is made of high-strength steel and has a reliable design;
all components of ULYANOVETS 25 t truck cranes are thoroughly tested and have high wear resistance;
maintenance of this equipment is not difficult due to the convenient location of the aggregate units.

The work of the operator of the truck crane ULYANOVETS 25 tons takes place in comfortable conditions

Great impact on work efficiency truck cranes ULYANOVETS 25 t shows how comfortable the operator's workplace is. The designers of UMP No. 2 paid due attention to this issue, so the crane operator's cab is comfortable:

a large glass area provides good visibility, which is necessary for accurate operations with cargo;
excellent sound insulation prevents the penetration of extraneous sounds into the cab and allows the crane operator to fully concentrate on work;
the heating and ventilation system contributes to comfortable work both in winter and in summer.

Control panel in cab truck cranes ULYANOVETS 25 t raises no objections. All instruments are located within reach and allow you to quickly and easily manage work operations. The cabin is equipped with a comfortable seat, which helps to reduce stress and fatigue for the operator of ULYANOVETS 25 t truck cranes and, as a result, increase labor efficiency.

Truck cranes ULYANOVETS 25 t are manufactured in full compliance with all requirements

As mentioned earlier, the design truck cranes ULYANOVETS 25 t fully meets the requirements of the Gosgortekhnadzor of the Russian Federation, which relate to the design and safe use of cranes. This is evidenced by the quality certificate, which was received by the products of the Ulyanovsk Mechanical Plant No. 2, including ULYANOVETS truck cranes 25 tons.

The operator of the ULYANOVETS 25 t truck crane, as well as those nearby, are protected by special devices that together make up the security system. Thereby, truck cranes ULYANOVETS 25 t without the risk of emergencies, they are used in cramped conditions, near power lines (power lines), and also move heavy loads.

All truck cranes ULYANOVETS 25 t are equipped with a microprocessor-based load limiter, which prevents possible overload and, as a result, overturning of the equipment. An important role when working in limited conditions is played by the coordinate protection device, which allows the operator of the ULYANOVETS 25 t truck crane to set the maximum angles of rotation of the cabin with the boom.

To the security system truck cranes ULYANOVETS 25 t includes a complex of specialized devices that monitor the reach and length of the boom, the mass of the load and other equally important indicators of the operation of this equipment. Therefore, when purchasing ULYANOVETS 25 t truck cranes, you can be sure that there will be no unforeseen situations involving a risk to life.

In addition to a reliable security system, truck cranes ULYANOVETS 25 t have many other advantages. One of them is that this lifting equipment does not require a special permit for movement on public roads. This allows you to freely use ULYANOVETS 25 t truck cranes on dispersed objects.

Moreover, with excellent maneuverability and mobility, truck cranes ULYANOVETS 25 t they move perfectly both on spacious tracks and on roads loaded with vehicles. Their compactness contributes to this: the length is 12 m, the width is 2.5 m, and the height is 3.65 m. use, observing a certain speed limit.

Truck cranes ULYANOVETS 25 t have earned recognition not only among Russian consumers, but also in many countries of the world. Due to high performance, cost-effectiveness, as well as excellent technical and operational characteristics, ULYANOVETS truck cranes with a lifting capacity of 25 tons are slowly but surely approaching the positions of the sales leader in their market sector.

Several arguments in favor of buying truck cranes ULYANOVETS 25 t

Having considered the main characteristics of ULYANOVETS truck cranes with a lifting capacity of 25 tons, we can conclude that they are of high quality and durability. This technique has a number of advantages in comparison with competitive analogues of both Russian and foreign production. In addition, the attractive price deserves attention. truck cranes ULYANOVETS 25 t.

Expand scope truck cranes ULYANOVETS 25 t possible by equipping them with attachments. It is noteworthy that, at the request of the customer, the presented equipment can be equipped not only with a lattice boom extension, but also with a special lift (the so-called “cradle”), which allows lifting people and loads with a total weight of up to 300 kg.

It should be noted that the sale truck cranes ULYANOVETS 25 t, as well as additional attachments for them, is carried out in our company. A wide range of this equipment, presented in our warehouse, will allow you to choose a truck crane, taking into account all the wishes of the customer. In addition, the relatively low price and high quality of ULYANOVETS 25 t truck cranes is an indisputable advantage of this technique.

If you decide to buy truck cranes ULYANOVETS 25 t, then the company's managers will help you in choosing a specific model of this equipment. They will acquaint you with the characteristics of the products presented by UMP No. 2. For detailed information on ULYANOVETS truck cranes with a lifting capacity of 25 tons and the conditions for their sale, you can contact the phones indicated in the "Contacts" section.

Truck cranes MKT-25.1 from the ULYANOVETS 25 t series are ideal for operation in modern cities, as well as at dispersed sites. They are mounted on a non-all-wheel drive chassis KAMAZ 65115, which allows us to talk about good driving characteristics. The three-section telescopic boom of this ULYANOVETS truck crane provides an optimal service area and a good height for moving goods.

Load capacity: 25 tons
Chassis: KAMAZ 65115
Wheel formula: (6x4)
Arrow length: 21.7 m

The chassis of the domestic truck KAMAZ 53215 (6x4) is used as the base for the MKT-25.2 automobile cranes of the ULYANOVETS brand. The power unit running on diesel fuel meets the requirements of environmental safety, which allows the use of these truck cranes ULYANOVETS 25 tons in urban areas. The hydraulic system sets in motion all the working parts of the presented ULYANOVETS equipment and is highly reliable.

Load capacity: 25 tons
Chassis: KAMAZ 53215
Wheel formula: (6x4)
Arrow length: 21.7 m

The range of ULYANOVETS truck cranes with a lifting capacity of 25 tons is quite wide. Its prominent representative is the MKT-25.3 model ULYANOVETS, mounted on a chassis with all-wheel drive KAMAZ 53228. This allows the use of this ULYANOVETS equipment at sites with difficult road conditions. Excellent characteristics, coupled with an affordable price, are a weighty argument to buy a ULYANOVETS truck crane model MKT-25.3

It is in good demand solely due to the KAMAZ-43118 crane chassis, which is very popular with construction organizations for its off-road capabilities and, of course, the ability to use this modification to perform work with attachments that are not characteristic of lifting equipment, this is drilling recesses in the ground, destroying concrete structures, and other devices with hydraulic drive. This modification is used by power engineers in the construction of power lines, utilities, farmers and just construction organizations that get the opportunity to perform many types of operations with one mechanism.

The strength characteristics of the lower and rotary frames, the boom consisting of three sections of a rectangular shape, a decent support contour of 5.8x5m allow the MKT-25.7 crane to have a circular work area with excellent load-altitude characteristics for its class. However, the model shows all its abilities only when the boom equipment is located at the rear, when the front part of the chassis hung on supports is an additional counterweight.

The modern exterior of the operator's cabin organically fit into the overall concept of the MKT-25.7 truck crane with large beautiful windows, a conveniently opening door, a new wiper, including the interior with a modern display showing the readings of safety devices, a sprung seat resembling a professional type "Pilot", four control handles crane work and of course a stove for winter operation.

The basic package includes two jibs 6 and 9 meters with a mechanism for transforming the installation angle of 180 or 150 degrees to the boom. The rigidity of the three-section boom is sufficient for telescoping loads of up to 4 tons on the hook during particularly complex installation work.

Truck crane Ulyanovsk MKT-25.7 specifications

Base chassis KAMAZ-43118 (6x6)
Max load capacity/reach: 25 tons / 3 m
Load moment, t/m 75
Truck crane weight, kg 20400*
Transport dimensions, mm 12000х2500х3650
Boom length, m 9.7-21.7
Hook lifting height max. (boom / jib), m 21.8 / 27
Departure, m 2.3-19
Support contour, mm 5800х5000

* reference

Cargo height characteristics

Crane Ulyanovsk MKT-25.7 is equipped with extensions in two positions for each size, taking into account the working area of 360 degrees, with the main position "arrow back". Lifting 25 tons carried out retracted

Specializing in the production of various construction equipment, Ulyanovsk Mechanical Plant No. 2 (UMZ No. 2) is one of the leading enterprises in its field. Truck cranes Ulyanovsk, which can be found so often on the roads, are in constant demand, both from small and large construction companies. Not inferior to European counterparts in quality, this lifting equipment has a relatively low price, and the necessary spare parts can always be found in stock.

Domestic ones are adapted to local operating conditions and are considered quite unpretentious. This technique is distinguished by good maneuverability and relatively small overall dimensions and is easy to move even in heavy traffic. The model range of lifting equipment of this brand is represented by crane installations on three-, four-axle or special chassis. Truck cranes Ulyanovsk can be used on any construction sites, including those with poor road conditions. Depending on the expected operating conditions, the customer can choose the most optimal option.

If the access roads to the facility are in poor condition, then it is advisable to opt for an all-wheel drive vehicle. Truck cranes on a chassis that does not have four-wheel drive are suitable for operation within the city - they are distinguished by more economical fuel consumption and better running characteristics.

Technical characteristics of models of truck cranes Ulyanovsk MKT-20, MKT-25, MKT-30, photo

The line of lifting equipment Ulyanovsk includes the following models of equipment. The MKT-20 truck crane is designed to perform lifting work in the city. The equipment is produced on a two-axle or MAZ and is characterized by mobility and functionality. This truck crane Ulyanovsk has a lifting capacity of 20 tons. The length of the telescopic boom is 8-18m and the working area is 360°. The total mass of the crane with the main boom is 15.5 tons, and the travel speed is 60 km/h.

The mobile crane MKT-25 has a simple and reliable design and is one of the most popular models of such equipment. The weight of the cargo lifted by the crane should not exceed 25 tons - for this, the equipment is equipped with a 22-meter three-section boom. Crane operating area - 360°. It is possible to install jibs with a length of 6 or 9 m, a drill (with a drilling depth of up to 3 m) or various hydraulic tools. The boom reach is 2.3-19 m.

Models of MKT-25 cranes can be mounted on road or all-terrain chassis MAZ, Kamaz, Ural or KRAZ. In the production of this series, European and American components are used. The total weight of the equipment with the main boom is 20.4 tons. The price for a truck crane of this model starts from 4.5 million rubles. The control of the crane is quite simple, the work process is carried out using a hydraulic drive.

Truck cranes Ulyanovsk MKT-30 with a lifting capacity of 30 tons belong to the equipment of the middle class of gravity. MAZ, Kamaz or Ford Cargo with 3 axles can be chosen as a chassis. The equipment is distinguished by a high level of productivity and cargo-altitude indicators. of this series reach speeds of up to 90 km/h, which allows you to quickly cover the required distance from one object to another. The equipment is equipped with a powerful diesel engine.

Heavy truck cranes Ulyanovsk - specifications and features

The MKT-40 truck crane model has a lifting capacity of 40 tons. The equipment is equipped with a four-section boom, the maximum height of which is 30 m (minimum - 9 m). The length of the jibs can be 6, 9 or 13 m. The working area is 360 °. The winch is controlled by joysticks. The crane installation is mounted on the chassis "Ford" or "Volvo" or KAMAZ. The speed of the truck crane is 60 km/h. The total mass of equipment is 30 tons.

Taking into account the latest achievements of world crane building, the MKT-50 model was developed. Distinctive features of these Ulyanovsk truck cranes are: a large support contour (9 x 8 m in size), a significant margin of safety, two cylinders designed to lift the boom, a powerful slewing device (diameter - 1.9 m). The lifting height of the boom, made of Swedish steel, is from 11 to 35 m. The crane installation can be completed with an 8- or 14-meter jib.

This powerful machine, with a load capacity of up to 50 tons, is designed to work in difficult conditions. Four-axle, including all-terrain, Kamaz, Volvo or Iveco chassis can be used as a chassis. The total weight of the truck crane is 40 tons. The cost of this truck crane is from 7.8 to 9.5 million rubles.

Ulyanovsk 25 tons stands out among similar equipment in that a number of European and American components are used in the design. The technique is popular for assembly, high-rise, construction, loading and unloading operations. Today, the plant has produced more than 3 thousand cars. You can buy an Ulyanovsk crane of 25 tons from the Atlant company.

The specifics of the equipment

The lifting height of the boom does not differ from the same "Chelyabinsk" or "Galichanin" of similar power - 21.7 meters is enough to lift the load to a height of 6-7 floors. But the crane installation can rotate 360 degrees, not 240.

To increase the reach of arrows, jibs 6 or 9 m long are used. Ulyanovsk 25 tons can also be equipped with a drill, concrete breaker, hydraulic hammer or other attachments certified by the manufacturer.

Otherwise, the capabilities and features of the crane are similar to analogues:

three-section telescopic boom;
hydraulic drive of the crane installation;
electronic limiter that controls the load;
high voltage protection module.

The gooseneck is used if you need to quickly lift a load weighing no more than 100 kg to a great height. When the truck crane Ulyanovsk 25 tons is in the transport position, the unit is located to the right of the boom in the direction of travel.

Operation features

A few words about the driving characteristics of the car. "Ulyanovets 25 tons" is mounted on the KamAZ 65115 chassis, which has a 6x4 wheel formula. This is not the most optimal indicator for high traffic, but in general does not affect the vast scope of the crane.

The user of the machine can be sure of the durability of the undercarriage. Here, for the first time, a ten-pin fastening of the rim to the hubs was implemented. In practice, we have already seen that this eliminates a number of problems. For example, the destruction of hub bearings or steering rod joints, which reduces the efficiency of movement.

MKT 25 Ulyanovsk is equipped with a mechanism that calculates the risk of overturning or overloading the crane. This is true when, during operation, the rotation of the boom is prevented by objects built nearby. If there is a possibility of overload, the system will instantly react, give a sound and light signal to the operator, and also block the control.

Technical characteristics of the truck crane "Ulyanovets" 25 tons

The main ones are shown below:

maximum hook lifting height - 21.7 m and 30 m (with jib);
load lifting speed - up to 6.5 m/min;
rotation speed of the crane part - up to 1.75 rpm;
maximum travel speed - 50 km / h;
dimensions - 12.0x2.5x3.65 m;
total weight of the crane with an arrow - 20.4 tons;
engine power - 240 hp;
the volume of fuel tanks - 250 l;
onboard voltage - 24 V;
lift overcome by the machine - up to 25 degrees.

The characteristics of the Ulyanovsk crane 25 tons distinguish it for the better, as well as the cost (from 5 million rubles). When contacting the company "Atlant" you can reap other benefits.

Profitable proposition

Since 2008, we have been selling special equipment, and the Ulyanovsk crane for 25 tons is far from the last place in demand. You can become its next owner.

To do this, you can get a commercial offer on the company's website, contact us by phone or write an e-mail. Recall: the first method is preferable, because in addition you will save 100 thousand rubles. Act now, and in the shortest possible time we will deliver "Ulyanovets" 25 tons to the specified place, we will carry out its commissioning and give a guarantee for more than 1 year.

Technical data:

Carrying capacity, t:	25
Load moment, tm	75
departure, m	2,3-19
Hook lifting height, m:
on the main boom	10,5-21,8
on an arrow with a jib	27,4
Boom length, m	9,7-21,7
Gooseneck length, m	6
Travel speed, km/h:
transport	60
Overall dimensions, mm:
length	1200
width	2500
height	3650
Gross weight, t	20,9

The Ulyanovsk MKT-25 truck crane differs from many types of equipment manufactured by the Ulyanovsk Mechanical Plant No. 2 in its reliable and proven design, created using American and European components. In total, more than 3 thousand units of MKT-25 were produced.

Truck crane manufacturer

Ulyanovsk MKT-25 is a truck crane of domestic production. It is produced by the Ulyanovsk Mechanical Plant No. 2 using modern equipment and special technological equipment. The plant was put into operation in 1961, therefore, more than fifty years of experience, combined with updated equipment and qualified specialists, allows us to create the most cost-effective models.

The Ulyanovsk MKT-25 truck crane model is distinguished by a proven and proven design, which is why it is very popular with assemblers, builders, and workers. The crane installation itself can be mounted on all-terrain and road chassis of the Ural, MAZ, KamAZ brands.

Chassis and boom type

The automobile crane Ulyanovsk is based on the KamAZ-65115 medium-duty chassis. The wheel formula of the vehicle is 6x4. Eight V-shaped cylinders with a displacement of 10.86 liters. Power - 240 hp, minimum specific consumption of diesel fuel - 207 liters per hour. A kind of engine in the automobile base of the crane Ulyanovsk MKT-25 - 740.11-240.

The telescopic boom consists of three sections, which are driven by a hydraulic cylinder. The working area is 360°, and the lifting height is 22 meters. It is allowed to install a gooseneck at 9 or 6 meters. Sections are made of structural steel, welding was carried out on automatic welding equipment. The control of welding seams is carried out by ultrasonic and visual methods.

Lifting parameters

The truck crane Ulyanovsk of this model has the following characteristics:

cargo moment - 75 tm;
load capacity - 25 tons;
lifting height, taking into account the jib - 27 m;
boom reach - 2.3 meters, length - from 9.7 to 21.7 meters;
speed of lowering / lifting loads - 6.5 m / min;
jib length - 6 or 9 m.

The truck crane can move at a speed of 50 km/h. At the same time, the load on the roadway through the tires of the front wheels is 4.7 tf, and through the tires of the bogie wheels - 15.7 tf.

Truck crane dimensions

Ulyanovsk has the following overall parameters in the transport position:

length - 1200 cm;
height - 365 cm;
width - 250 cm.

The mass of the truck crane, taking into account the main boom and without the jib, is 20.4 tons. In the case when the crane is additionally equipped with jibs, a concrete breaker, a drill with a drilling depth of up to three meters or hydraulic equipment, it is necessary to take into account their weight and the capabilities of the truck chassis. Mounted equipment with a height of not more than 25 meters is possible.

Model Benefits

One of the advantages of the Ulyanovsk MKT truck crane model is a microprocessor-type load limiter. It is designed to monitor the load level of the crane. With it, control the reach and length of the arrow. Sensors display the load based on the weight of the load on the hook.

With the help of a microprocessor, you can set the coordinates by which the crane operation area will be limited in conditions of limited space or while working in the area of power lines. With the help of modern equipment, the microprocessor unit can be located far from the sensors in a place convenient for the driver in the working cabin, since the data is transmitted digitally.