Instruction
Choose fabric for future covers. It can be velor or tapestry, artificial or natural leather, plush or faux fur.
Remove the pattern from the seat. To do this, you need to take a newspaper or film, attach it to the seat and pin it with pins. Trace your pattern with a pencil or marker and cut it out. Be sure to check the pattern for symmetry.
Put the pattern on the seat and double-check the correctness of the resulting pattern.
Place the pattern on the fabric and circle it with chalk or a marker, be sure to make allowances for the seams. Also make an additional pattern of foam rubber.
Sew both patterns inside out, making sure to leave a small hole so that the foam can be inserted through it. But sew the headrest and armrest already without foam rubber and also leave a small hole for the cord. Then pull them on and sew.
After the covers are ready, pull them over the seat and carefully sew them up. Of course, you can use the clasp for easy removal of covers. In this case, Velcro is ideal - it is not only easy to use, but also easy to sew on. If desired, you can make another set of covers to change the image of your car.
Over time, the upholstery of the car interior begins to lose its original appearance. This is due to continuous use. Car covers will help you keep the interior of your car in perfect condition. The manufacture of such accessories can be expensive, so it is advisable to do your own cutting and manufacturing.
You will need
- - material;
- - tracing paper;
- - drawing accessories;
- - markers;
- - sewing machine;
- - threads.
Instruction
Take measurements from the front seats and rear sofa of the car. Make a drawing or sketch, which shows in detail all the features of the relief and indicate the dimensions of each protrusion.
If you have old covers, you can make a pattern from them. Visit the forum dedicated to your car model. There you can find useful tips on sewing covers.
Check the correctness of the drawing several times. The fewer mistakes you make, the more material you save.
Choose the material from which your covers will be made. It should be not only beautiful, but also practical. If you choose a light material, it will get dirty too quickly. It is best to use automotive leather or velor for manufacturing. Such materials perfectly withstand repeated exposure to external factors.
Mark the back of the material. Check its correctness and circle with a red marker or pencil those lines along which you will need to make cuts.
Cut out the piece. Make your first try. If there are no flaws, then sew the material with a basting stitch. After that, it is necessary to flash the workpiece with the final seam on a typewriter.
All edges of the covers need to be hemmed by bending one or two centimeters of material. On the back side you can place pockets for any things.
Separately make covers for the headrests. They must match in design with the main cases. From the remnants of the material, make pillows that can be put on the back sofa of the car.
Related videos
Every car owner wants to make their car cozier, more comfortable and more beautiful. Many motorists purchase modern covers from beautiful and durable materials, spending a lot of money on them, but few people realize that such covers you can sew by yourself. You can make automobile covers with your own hands, updating the interior of your car.
Instruction
Use durable and reliable materials for sewing covers - it can be both natural fabrics and synthetic ones. Natural fabrics have a lot of advantages - they pass air and moisture well, do not heat up or cool down in the warm and cold seasons. Nevertheless, covers from natural fabrics are short-lived and wear out quickly with frequent use.
Synthetic fabrics offer a wider range of colors and are also more durable. At the same time, synthetics do not absorb moisture well, and in hot weather it gets very hot. As a universal material for sewing covers, you can use a durable tapestry fabric with synthetic fibers, and in order to make the front part of the cover special rollers. You can also make the cover softer by inserting separately cut pieces of thin foam rubber between the lining and the front side.
Sources:
- how to make your own car covers
Car covers are not just decoration, but also a useful thing. When making them, you can slightly correct the shape of the seats by sewing special rollers into the covers. Cover awnings can be made from both natural and synthetic fabrics. For them, you can choose velor, tapestry, natural or artificial leather, faux fur or plush. So, what fabric to choose and how to make seat covers with your own hands.
What fabric is suitable for sewing covers
Natural fabric fibers absorb moisture quite well. Such a fabric does not create a "greenhouse" effect in summer, and in winter - a feeling of cold. However, it gets dirty more, and after washing it can “sit down”.
In addition, covers made of natural fabric wear out faster, and their colors are usually not very bright.
Synthetics are more durable. However, the disadvantages of the fabric made from it include poor absorption of moisture. In addition, such a fabric is usually slippery to the touch, which is not very comfortable. From a spark, it can melt and catch fire. Its significant disadvantages include the ability to electrify during friction.
Domestic factories for machines most often use tapestry, which contains synthetic fibers. Covers made of faux fur are comfortable to use in winter, but in summer it is quite hot to ride with them. The leather interior looks impressive, but such a pleasure will cost a lot.
Remember: fabrics used for furniture upholstery are not always suitable for car seats. The most practical covers are made of leather and velor.
Greenhouse film is better for patterning. If you don't have one, you can use regular newspaper. Attach it to the fabric, secure with pins, circle with a marker, cut out. Be sure to check how symmetrical the part turned out. If something is wrong, trim and check again by overlaying the pattern on the car seat. And only after that you can cut. Do not forget to leave allowances of one centimeter for the seams.
If you decide to use soft material so that the new cover does not look baggy, do the following: cut not only from this fabric, but also from the mattress. Sew the two fabrics together, inside out. In this case, a small area should be left unsewn. You can put foam rubber prepared in advance into it. Sew the armrest and headrest already without foam rubber, exactly in shape, not forgetting to leave a hole. Stretch and sew.
If there is a plastic trim on the bottom of the front seat, remove it first. Only after that, put on the cover and press its edge with an overlay. Thus, the car cover will be firmly fixed in the transverse position.
We should not forget about some features of the rear seat. The armrest may have a special flap with a zipper. For a car in which the backrest reclines in parts, universal covers are not suitable.
On some cars, airbags are located at the end of the seatbacks. Wearing covers will interfere with the opening of the side airbag. In this case, it is better to clean the upholstery of the seat. In the manufacture of covers for such seats, cuts must be made in the places where the airbags deploy. They should be sewn up with cotton threads - if necessary, they are easily torn.
Sources:
- how to sew a car seat cover
