Car upholstery repair in the case of interior restoration work is almost a priority task, since driving a car on a faulty seat threatens not only back pain, but also a potential accident. Changing the upholstery with your own hands, you can save a lot of money. True, in some cases you have to tinker.
Car seat upholstery repair basics
The interior of the vehicle is constantly exposed to various influences. Drivers often smoke while driving, which often ends up with cigarettes or their embers falling on the upholstery. Passengers can be children with a special talent for dirtying everything around. In addition, the upholstery can be damaged when transporting bulky items.
Car seat upholstery repair is not considered the most difficult type of vehicle maintenance work, so most motorists prefer to solve this problem on their own.
The interior of the car is subject to regular maintenance, since, in fact, it is the face of its interior decoration. If it was decided to personally restore the upholstery, first of all, you need to be patient and try to increase your level of responsibility. For this type of repair work, you will need certain tools and materials. The material is selected depending on the fabric with which the seats in the vehicle are upholstered. The main tool will be a screwdriver used to unscrew most of the fasteners on which the trim is installed in the cabin.
Close attention should be paid to the repair of the driver's seat, because it is the most important in the car. The more comfortable the driver feels, the safer he is on the road.
How to properly dismantle the seat?
Repair of car seat burns, first of all, implies the dismantling of seats. First, the car seat is disassembled by unscrewing the bolts that secure the seat to the floor. After that, the electrical connectors are disconnected.
The second step is to remove the old upholstery. To make your job easier, bend the fasteners on the back of the chair and free the edge from the internal structures.
After removing the fasteners, the cover is removed from the seat. It is worth noting that this process requires some effort, as the inner cushions can make it difficult to tighten the cover.
Repair of the upholstery of the car interior can be started following the successful dismantling of the structure. When restoring upholstery, you must follow the instructions attached by the manufacturer. During repairs, it is recommended to use exactly the materials that make up the interior of the vehicle. Here it is better not to save on the price - the miser pays twice.
Repair of leather car seats
Repairing leather car seats is rightfully considered the most difficult type of work, as it requires the greatest amount of materials and effort. As materials are used:
- mesh;
- skin analogue;
- repair kit .
First of all, the irregularities are polished with the help of a skin, after which a thin plastic mesh is applied in an even layer, filled with liquid skin. After carrying out these actions, it is necessary to wait until the repair material dries, and only then put the car into operation. Car seat leather repairs may take a little longer than fabric repairs, but the interior will look good for a long time.
Note that if it became necessary to restore a chair equipped with a heating system, then after disconnecting the cables, the on-board computer will generate an error that cannot be eliminated by oneself. In such cases, it is recommended to contact specialists.
Seat upholstery repair
Repairing the fabric upholstery of car seats is carried out in two stages, the first of which is the patch sticker. Before repair, special attention must be paid to the choice of fabric - it must match the color of the car interior. It is also recommended to stock up on a repair kit. To restore the seat, a patch is cut out according to the shape of the affected area, and a special glue is applied to the place of gluing with a thin layer, on which the cut piece of cloth is applied.
The second stage, heat treatment, will help eliminate irregularities at the edges. A heat-resistant film is fixed on the restored area, which is ironed with a heated iron. The result of the operations performed, as a rule, is a perfectly even upholstery, which, with careful use, will last for many years.
If a worn hole has formed on the seat, then repairing the fabric car seat produced in the following way. First you need to carefully trim the frayed edges of the upholstery, as well as clean and degrease the surface to be repaired. Next, moisten the upholstery and let it dry a little. After that comes the process of preparing the repair material - it must be clean and free of foreign particles. Next, the patch is glued and heat treated.
One of the most important points in the restoration of a car seat is to keep clean those areas of the seat that have a satisfactory appearance. To ensure that the repaired part does not differ from the original material, the adhesive should be applied as carefully as possible. In addition, the adhesive must not be allowed to extend beyond the repair area by more than one millimeter. For this, a pattern is usually used, along the edges of which a border is drawn with chalk, due to which there are no difficulties with the precise application of glue.
Read about how to repair a car trunk lock with your own hands. You can familiarize yourself with the principles of bumper repair without special tools.
Features of local repair of burned seats
Repair of burnt car seats is carried out using a certain chemical composition. The cleaned surface is filled in layers until the flaw is completely covered. This mixture can be purchased at many auto parts stores. It is worth noting that special attention should be paid to the color and structure of the composition, so that subsequently the restored area is not conspicuous. If velor seats are installed in the car, then the top layer of the mixture should be covered with fibers imitating pile.
When repairing burns in leather car seats, the hole should also be filled with a chemical composition, and for shine, a special gel should be applied on top, thanks to which the chair will regain its former gloss. The final step is painting the restored surface.
