Recommended engine oil for Mazda Demio(Mazda2). Recommended engine oil for mazda demio from the manufacturer! engine oil for mazda demio dw3w

12.10.2019

Transmission

Good day everyone! In today's article, we will deal with the choice automatic transmission oils Mazda Demio. In fact, everything is very simple, since automatic transmission oil Mazda Demio There are only two standards. These are M-III and M-V. But what kind of oil and which automatic transmission is poured into we will figure it out already in the course of writing the article.

What kind of oil to fill in automatic transmission Mazda Demio?

As mentioned above, two types of oils are poured into the Mazda Demio automatic transmission, among which is either a liquid with an M-3 approval or an M-5 approval. There are genuine Mazda fluids and third-party fluids that also meet the appropriate tolerances.

To choose automatic transmission oil Mazda Demio sometimes it is enough to get the dipstick out of the gearbox and see what is written on it. As a rule, the manufacturer always indicates the recommended automatic transmission fluid. The dipstick should read M-V or M-III. This is the easiest option. But agree that the automatic transmission dipstick can be simply replaced? There are plenty of cases. For example, the previous owner breaks the plastic ring on the dipstick and changes the dipstick to a similar one, but from a different automatic transmission. He knows how much oil is in the Mazda Demio automatic transmission. But the new owner of this car is unlikely ... Or, for example, the service accidentally mixed up the probes from two identical cars, but with different automatic transmissions. There are a lot of cases. Therefore, blindly relying on the inscription on the probe is not worth it. Yes, and in principle there are dipsticks without any inscriptions about the recommended oil.

In this case, you should refer to the manual of the machine. It will be clearly written what oil to pour in automatic transmission Mazda Demio. But after all, you went to our site and it seems that you do not have this information. Then we can safely say that you have come to the right place.

Automatic transmission oil Mazda Demio

Make and model	Body	Year of issue	Engine	Gearbox type	Required oil	Required volume, l
	DW3W	96.07-02.06	VZ-ME 1,3l	M/T	GL-4 75W90	2.1
	DW3W	96.07-99.10	VZ-ME 1,3l	A/T	ATF M III	5.7
	DW3W	99.11-02.06	VZ-ME 1,3l	A/T	ATF M III	7.0
	DW5W	96.07-02.06	V5-ME 1.5l	M/T	GL-4 75W90	2.7
	DW5W	96.07-02.06	V5-ME 1.5l	A/T	ATF M III	5.9
	DW5W	99.11-02.06	V5-ME 1.5l	A/T	ATF M III	7.0
	DY3W	02.07-...	ZJ-VE 1,3l	2WD M/T	GL-4 75W90	2.7
	DY3W	02.07-...	ZJ-VE 1,3l	2WD A/T	ATF M-V	7.0
	DY3R	03.10-...	ZJ-VE 1,3l	4WD A/T	ATF M-V	7.0
	DY5W	02.07-...	ZY-VE 1,5l	2WD M/T	GL-4 75W90	3.0
	DY5W	02.07-...	ZY-VE 1,5l	2WD A/T	ATF M-V	7.0
	DY5R	03.10-...	ZY-VE 1,5l	4WD A/T	ATF M-V	7.0

Based on this table, it is easy to determine what oil to fill in automatic transmission mazda demio. To do this, it is enough to know the year of manufacture of the car, the volume and model of the engine and the model of the body.

Original oil in automatic transmission Mazda Demio

The original Mazda Demio automatic transmission oils include liquids and. These are pure imports, produced either in Japan (metal containers 4L and 20L) or in America (plastic containers 0.046L).

Mazda ATF M-3	Mazda ATF M-5

This article details, what kind of oil is recommended to fill in a specific model of a Mazda Demio car!

Content

1996-2002 release

Engines B3 (1.3 l) and B5 (1.5 l)

The Mazda Demio instruction manual recommends lubricants that meet the following parameters:

in accordance with API classification - oil type SH, SJ or SG;
the volume of engine oil required when replacing, taking into account the change of the oil filter, is 3.2 liters.

5w - 30 is used at temperatures from +10 0 С to -29 0 С (or less);
10w - 30 is used under temperature conditions above -18 0 С;
15w - 40 or 20w - 50 are poured if the air temperature ranges from -12.5 0 С to +38 0 С (and higher).

(Mazda2, Verisa) 2002-2007 release

ZJ-VE and ZY-VE engines

It is recommended to fill in lubricants that meet the API classification - oil class SJ or SL. The viscosity parameters of liquids are selected depending on the temperature range that meets the operating conditions of the machine until the next oil change (see diagram 1). Chart 1 interpretation:

at temperatures above -20 0 C, pour 10w - 30;
at a temperature range from -25 0 С (and below) to +40 0 С (and above), pour 5w - 30 or 5w - 20;
0w - 20 is used if the air temperature ranges from -35 0 C (or less) to +40 0 C (or more).

It is necessary to use lubricants 0w - 20 in Mazda Demio cars with high mileage or in the warm season with great care. This is due to the low viscosity of the lubricant. Before using it, you need to be sure that the power unit and its sealing elements are in good condition.

The volume of lubricant required when replacing, taking into account the change of the oil filter, is 3.9 liters.

FUJA/B or FXJA/B power units

The manufacturer Mazda Demio recommends using motor oils that meet the SJ class according to API standards. The selection of the viscosity of the lubricant is carried out according to diagram 1, the interpretation of the diagram is described above in the text. The volume of engine fluid required when changing the oil, taking into account the oil filter, is 3.8 liters.

Mazda Demio DE(Mazda2) 2007-2014 release

Vehicles used in the USA and Canada

original Mazda motor fluids;
motor oil viscosity 0w - 20 (used at temperatures from -40 0 C (or less) to +50 0 C (or more), helps to save the fuel mixture;
meeting the requirements of API and ILSAC standards - oil classes GF-4 / GF-5 with the above viscosity.

The manufacturer indicates that Castrol has received the appropriate approvals to allow the use of certain types of its motor oil for this car model. The tolerances are marked on the lubricant canister.

The volume of engine oil required for replacement, including the oil filter, is 3.9 liters.

Mazda2 DJ since 2014

The Mazda 2 manufacturer recommends using different lubricants depending on the type of power unit.

SKYACTIV-G 1.3 and SKYACTIV-G 1.5 engines (for Europe)

According to the Mazda 2 manual, engine mixtures must meet the following characteristics:

Original oils:

Mazda Original Oil Supra with a viscosity of 0W-20 is used at temperatures outside the car from -35 0 C (or less) to +40 0 C (or more).
Mazda Original Oil Ultra with a viscosity marking of 5W-30 is filled in if the air temperature is from -30 0 С (and lower) to 40 0 С (and higher).

according to API standards - SL/SM/SN;
according to the ACEA standard - A3/A5;
with a viscosity of 0W-20 are used in the temperature range from -35 0 C (or less) to +40 0 C (or more), or 5W-30 is used at temperatures from -30 0 C (and below) to 40 0 C (and above ).

SKYACTIV-G 1.3 or SKYACTIV-G 1.5 LP engines (excluding Europe)

according to API classification - types of oils SG / SH / SJ / SL / SM / SN (for African countries, it is preferable to use the SL class and above);
according to the ILSAC system - GF-II/GF-III/GF-IV/GF-V.

The selection of viscosity is made depending on the temperature behind the machine's fence:

at temperatures from -20 0 С (and below) to +40 0 С (and more), 10W-30 is poured;
if the thermometer readings are from -30 0 С (and below) to 40 0 С (and above), pour 5W-20 or 5W-30;
in the temperature range from -35 0 C (or less) to +40 0 C (or more), use 0W-20 or 0W-30.

The volume of lubricant that will be needed when changing the oil, taking into account the change of the oil filter, is 4.2 liters.

SKYACTIV-G 1.5 MP or SKYACTIV-G 1.5 HP engines

in accordance with API standards - SG/SH/SJ/SL/SM/SN;
according to the ILSAC standard - GF-II/GF-III/GF-IV/GF-V.

The viscosity of the lubricant depends on the temperature of the region in which the vehicle is operated:

10W-30, 10W-40, 10W-50 is poured at temperatures from -25 0 C (or less) to +40 0 C (or more);
5W-20, 5W-30, 5W-40 is used if the thermometer shows from -30 0 C (or less) to +40 0 C (or more);
0W-20, 0W-30 is used under temperature conditions from -35 0 C (or less) to +40 0 C (or more).

The volume of engine oil required for replacement, including the oil filter, is 4.2 liters.

Power units SKYACTIV-D 1.5

Mazda original oils:

Mazda Original Oil Supra DPF with a viscosity of 0W-30 is poured at temperatures from -35 0 C (or less) to +40 0 C (or more);
Mazda Original Oil Ultra DPF 5W-30 is poured in temperature conditions from -30 0 С (and below) to 40 0 С (and above).

Alternative lubricants:

according to ACEA classification - C3 with a viscosity of 0W-30 or 5W-30 (the temperature of use of oils is similar to the original liquids).

The duration of the operating period of the motor directly depends on the engine oil. The use of motor oil that is not suitable for a particular type of engine leads to a disruption in its operation, an increase in the consumption of the fuel mixture. In this article, we have collected information on recommended engine oil for Mazda Demio (Mazda2).

Auto engines B3 (1.3 l) and B5 (1.5 l)

The Mazda Demio instruction manual recommends lubricants that meet the following parameters:

in accordance with API classification - oil type SH, SJ or SG;
the volume of engine oil required when replacing, taking into account the change of the oil filter, is 3.2 liters.

5w - 30 is used at temperatures from +10°C to -29°C (or less);
10w - 30 is used under temperature conditions above -18 ° C;
15w - 40 or 20w - 50 are poured if the air temperature ranges from -12 ° C to + 38 ° C (and higher).

Mazda Demio DY (Mazda2, Verisa) 2002-2007 release

ZJ-VE and ZY-VE engines

Diagram 1. The dependence of the viscosity of the motor fluid on the ambient temperature.

at temperatures above -20 ° C, pour 10w - 30;
at a temperature range from -25 ° C (and below) to + 40 ° C (and above), pour 5w - 30 or 5w - 20;
0w - 20 is used if the air temperature ranges from -35°C (or less) to +40°C (or more).

The volume of lubricant required when replacing, taking into account the change of the oil filter, is 3.9 liters.

FUJA/B or FXJA/B power units

Mazda Demio DE(Mazda2) 2007-2014 release

Vehicles used in the USA and Canada

original Mazda motor fluids;
motor oil viscosity 0w - 20 (used at temperatures from -40 ° C (or less) to + 50 ° C (or more), helps to save the fuel mixture;
meeting the requirements of API and ILSAC standards - oil classes GF-4 / GF-5 with the above viscosity.

The volume of engine oil required for replacement, including the oil filter, is 3.9 liters.

Mazda2 DJ since 2014

The Mazda 2 manufacturer recommends using different lubricants depending on the type of power unit.

SKYACTIV-G 1.3 and SKYACTIV-G 1.5 car engines (for Europe)

According to the Mazda 2 manual, engine oils must meet the following specifications:

Original oils:

Mazda Original Oil Supra with a viscosity of 0W-20 are used at temperatures outside the car from -35 ° C (or less) to + 40 ° C (or more).
Mazda Original Oil Ultra with a viscosity marking of 5W-30 is poured if the air temperature is from -30 ° C (and below) to 40 ° C (and above).

according to API standards - SL/SM/SN;
according to the ACEA standard - A3/A5;
with a viscosity of 0W-20 are used in the temperature range from -35 0 C (or less) to +40 0 C (or more), or 5W-30 is used at temperatures from -30 0 C (and below) to 40 0 C (and above ).

SKYACTIV-G 1.3 or SKYACTIV-G 1.5 LP engines (excluding Europe)

according to API classification - types of oils SG / SH / SJ / SL / SM / SN (for African countries, it is preferable to use the SL class and above);
according to the ILSAC system - GF-II/GF-III/GF-IV/GF-V.

The selection of viscosity is made depending on the temperature behind the machine's fence:

at temperatures from -20 ° C (and below) to + 40 ° C (or more) pour 10W-30;
if the thermometer readings are from -30 ° С (and below) to 40 ° С (and above), pour 5W-20 or 5W-30;
in the temperature range from -35°C (or less) to +40°C (or more), use 0W-20 or 0W-30.

The volume of lubricant that will be needed when changing the oil, taking into account the change of the oil filter, is 4.2 liters.

Car engines SKYACTIV-G 1.5 MP or SKYACTIV-G 1.5 HP

in accordance with API standards - SG/SH/SJ/SL/SM/SN;
according to the ILSAC standard - GF-II/GF-III/GF-IV/GF-V.

The viscosity of the lubricant depends on the temperature of the region in which the vehicle is operated:

10W-30, 10W-40, 10W-50 is poured at temperatures from -25°С (or less) to +40°С (or more);
5W-20, 5W-30, 5W-40 is used if the thermometer shows from -30°С (or less) to +40°С (or more);
0W-20, 0W-30 is used under temperature conditions from -35°C (or less) to +40°C (or more).

The volume of engine oil required for replacement, including the oil filter, is 4.2 liters.

Power units SKYACTIV-D 1.5

Mazda original oils:

Mazda Original Oil Supra DPF with a viscosity of 0W-30 is poured at temperatures from -35°C (or less) to +40°C (or more);
Mazda Original Oil Ultra DPF 5W-30 is poured under temperature conditions from -30°C (and below) to 40°C (and above).

Alternative lubricants:

according to ACEA classification - C3 with a viscosity of 0W-30 or 5W-30 (the temperature of use of oils is similar to the original liquids).

according to ACEA classification - C3;
viscosity 5W-30 is poured at temperatures from -30 ° C (or less) to + 40 ° C (or more), and 0W-30 is used if the temperature is from -32 ° C (or less) to + 40 ° C (and more).

The volume of engine oil required for replacement, including the oil filter, is 5.1 liters.

Conclusion

Recommended engine oil for Mazda Demio (Mazda2) meets the technical requirements of the engine. The manufacturer in the manual indicates the possibility of using low-viscosity lubricants that help reduce fuel consumption. Such fluids are more suitable for winter than for summer, so if you decide to fill them in the warm season, check the condition of the motor and seals.

According to the manual, it is allowed to pour original and alternative liquids. In this case, you should pay attention to the composition, the lubricant can be synthetic, semi-synthetic, mineral. Synthetics and semi-synthetics, often referred to as multigrade oils, operate in a larger temperature range than mineral water.